SPL REPAIRS TO ROOF SHEET BLDG NO P-29 (FAMILY WELFARE CENTRE), SPL REPAIRS / REPLACEMENT OF STREET LIGHT JUNCTION BOX AND ALLIED WORKS AT CMP CENTRE AND SCHOOL AND OTHER REV WK AT CMP CENTRE AND SCHOOL UNDER GE(SOUTH) BANGALORE

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil Complete all as specified.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and nexc 10 sq m on plan and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in soft / loose soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing Excavated soil exceeding 250 M but not exceeding 500m and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.

M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Reinforced Cement Concrete Type M-25 Design Mix using 20 mm graded crushed stone aggregate) in foundations including rafts, footings and mass concrete complete all as specified and as directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions

Reinforced Cement Concrete Type M-25 Design Mix using 20 mm graded crushed stone aggregate) in columns complete all as specified and as directed.

Form work to sides and soffits of suspended slab for fair finished surfaces of concrete complete all as specified and as directed.

M&L RCC M-25 Design Mix for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

Form work to sides and soffits of beams (roof beam) for fair finished surfaces of concrete complete all as specified and as directed.

Form work to chajja for fair finished surfaces of concrete complete all as specified and as directed.

M&L for Reinforced Cement Concrete Type M-25 Design Mix using 20 mm graded crushed stone aggregate) in Chajja complete all as specified and as directed.

M&L for Reinforced Cement Concrete Type M-25 Design Mix using 20 mm graded crushed stone aggregate) in Beams, cantilevers, lintels, columns pillars, piers, posts, struts, chullah hoods, stair case, arches, domes, vaults, shell roofs, arch ribs, folded plates, slabs, balconies, canopies, deck slabs etc. or in similar articles upto 5th floor level complete all as specified and as directed.

M&L for Providing precast cement concrete 1:3:6 type C-1 solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls confirming to IS 2185-1979 laid in CM 1:6 complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry of Type C1 1:3 :6 (20mm graded aggregate) with solid blocks,exc.10 cm in width and setting in cement mortar1:6, complete all as specified and as directed.

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

S&F Powder coated anodised aluminium frame, for door, windows, ventilators runner & packing with rubber gasket etc, with one or more rebates including joinning cleat for rebates including joining cleats for fixing etc, complete all as specified & directed by Engineer-in-Charge.

S&F 4.0 mm thick figured glass, pin head type and glazing with aluminium beading & rubber gasket in each panes in square n.exc 0.5 sqm in each pane in louvers complete all as specified and as directed.

S&F solid door frame of size 50 x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification & drawing complete all as specified and as directed.

M&L factory made solid pannel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck in side with solvent cement for tiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be filled in the MS frame welded /seated to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement applying and fixing in the frame at side as per specification.

S&F 100 mm long aluminium anodised barrel tower bolts and extruded section and fixed complete all as specified and as directed.

S&F 100 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed .

S&F 200mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and as directed

S&F 150 mm long aluminium anodised barrel tower bolts and extruded section and fixed complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished smooth and even without using extra cement.

M&L for rendering 5 mm thick CM 1:4, over 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement including mixing of water proofing compound, finishing the surface fair and even complete all as specified.

M&L for rendering 5 mm thick in ceiling on fair faces of concrete surfaces in cement mortar 1:3 and finished smooth and even without using extra cement.complete all as specified.

M&L for rendering 10 mm thick on fair faces of concrete surfaces in cement mortar 1:4 over roof slab and top of chaajja etc with WPC and finished smooth and even without using extra cement.complete all as specified.

Supply only Integral water proofing compound complete all as specified and as directed.

75 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded crushed stone aggregate) in sub base of flooring/ hard standing complete all as specified and as directed.

40 mm thick PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) in floorings including finishing the surface even and smooth using without extra cement complete all as specified and as directed.

S&F non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15 mm thick in CM 1:6 etc complete all as specified and as directed.

M&L for glazed coloured ceramic tiles 350 x 250 x 7 mm/ 450 x 350 x 7 mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick rendering in cement mortar 1:4 etc complete all as specified and as directed.

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

M&L for applying three coats of white wash over a coat of priming plastered and other urfaces with alkali resistant complete all as specified and directed .

M &L for preparation of new plastered surface and applying two coats of cement base paint over cement primer on walls complete all as specified and as directed.

S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specifed and as directed.

S&F plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed.

S&F PVC low level flushing cistern 10 ltr capacity, valveless, syphonic action type with inlet, ball valve float and handle incl brakcet and flush pipe 32 mm dia complete all as specifed and as directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.. (Make : Cera or equivalent in parryware/hindware/prayag)

S&F vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, waste pipe 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed. (Cornet Series of Cera or Equivalent in parryware/hindware)

S&F 32mm waste pipe for WHB complete all as specified and as directed

S&F brass CP 15 mm bore two way bib cock, quarter turn with wall flange and aerator, complete all as specified and as directed.

S&F in repairs Bib tap cast copper alloy 15mm fancy type , Chromium plated screwed down, high pressure, with capstan head , screwed down screwed for iron pipe (Floral series) of Cera or Equivalent in Prayag/Jaguar/Hindware)

S&F pillar taps, brass, with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and directed. (Floral series) of Cera or Equivalent in Prayag/Jaguar/Hindware)

S&F 75mm dia PVC (SWR) floor/Nahani trap, plain with SS grating including solvent cement complete all as specified and as directed.

M&L for 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

PVC (SWR) bends any radius75mm bend complete all as specified and as directed.

S&F for 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F PVC (SWR) bends any radius 100mm bend complete all as specified and as directed.

S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position complete all as specified

S&F 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified.

S&F Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms)Complete all as specified.

S&F 20 mm bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete, fixed in repairs, all as specified.

Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F 20mm dia brass Elbow complete all as specified.

S&F 20mm dia brass Tee complete all as specified.

S&F of 20 mm dia male/female brass threaded adapter complete all as specified and as directed.

S&F angle valves /stop valve 15 mm nominal bore, brass, chromium plated, complete, fixed in repairs, all as specified and directed . (Make (Floral series) of Cera or Equivalent in Prayag/Jaguar/Hindware)

S&F towel rail 20mm dia 600mm long brass CP fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

PVC connections 15mm size with PTMT nuts of length 450mm all as specified.

PVC connections 15mm size with PTMT nuts of length 600mm all as specified.

Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complate all as specified and as directed.

S&F Push taps CP for urinals high pressure (Minimum weight 15mm-47gms/ 20mm- 75gms) complete all as specified.

S&F Urinal spreader of brass chromium plated for fixing with 15 mm dia pipe complate all as specified and as directed.

M & L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface.

M & L 75 mm thick PCC (1:2:4) type B1 20mm graded aggregate using as in plinth protections with joint cutting and joint filling with Bitumen grade 'B' etc complete all as specified.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

M&L 400mm X 400mm to 25 mm thick coloured glossy finished factory made chequered tiles/pavers, set and jointed & pointed in neat cement slurry as in path/floor etc over and including 20 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified.

Concrete bed to drain pipe 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate, complete all as specified and directed.

M&L for 150 mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars, complete all as specified and directed.

Removing excavated material to a distance n exc. 50 metre and depositing where directed at a level not exceeding 1.5 Metre above starting point, complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 incl finished even and smooth (without using extra cement).

M&L providing precast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in copings, setting in cement mortar 1:4 complete all as specified and directed.

M&L for PCC (1:2:4) type B1 in surface channels and drains complete all as specified and directed by Engineer-in-Charge.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds, mitered/ stopped ends etc

M&L providing precast cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in landings, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs setting with cement mortar 1:6 complete all as specified and directed.

S&F mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (anealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed.

Supply and fixing of Thermoplastic IP 66/67, weather proof, corrosion free, halogen and silicon free, UV reistence, insulated and shock proof, High impact strength, flame retardant and self extinguishing, Glow wires test conducted at 960 Deg junction box suitable for terminating cable for 6Sqmm/10 Sqmm/16 Sqmm including necessary cable gland and check nut Size of M32 (incoming and out going cbles) and mounting bracket clamp suitable size as per site with nut bolt washer including taking down old PVC Junction boxes any size any capacity complete all as specified and directed. (Make- Hensel Cat Part No -KF1010B and Cable Gland Cat Part No 1555.13.12)

S&F Rigid non-metallic PVC conduit 20mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing ccessoriessuch as couplers, lock nuts, saddles, pipe hooks etc. from PVC Junction Box to street light bracket for protection of cable fixing clamp on PCC poles drilled the hole and insert a PVC gutti and screwed suitable size screw and fix the clamp including taking down old PVC conduit any size complete all as specified and as directed.

S&F PVC 3 Core copper cable 1.5Sqmm insulated for fixing of junction box to street light fittings including taking out old PVC cable any size any capacity complete all as specified and directed Make- Polycab

Dismantling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified & directed.

S&F Pre- painted galvaume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with` L' type or' J' type or cranked hook bolt or with self tapping screws complete all as specified & directed by Engr-in-Charge.

S&F Pre- painted galvaume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with` L' type or' J' type or cranked hook bolt or with self tapping screws complete all as specified & directed by Engr-in-Charge.

M&l PCC 1:2:4 type B1 20mm graded aggregate as in fillets at junctions between roof and walls, copings rounded, flat or chamfered angles complete all as specified & directed.

S&F Roof trusses Fe-410-W (Gde-E-250) quality -B, (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified & directed by Engineer-in-Charge.

Dismantling floor hearth/ stone slabs/mosaic tile flooring or wall tiling including cement mortar bedding (but not backing) and removing servicebale tiles to stores and rubbish off rubbish off the same out side the MD land complete all as specified and as directed.

S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over and included 15 mm thick screed bed in cement mortar 1:6.

S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over and included 10 mm thick rendering in cement mortar 1:4. Note : The width of tiles 100 mm to be cut from full size of tiles as directed by Engineer-in-charge.

Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.

SREE CONSTRUCTIONS

Elite Constructions