WBPWD/EE/HD/NIeT-92/2025/26

Renewing C.I. clamp for pipe including cutting hole in wall etc. and mending good all (i) 15 mm

(iii) 25 mm

Renewing P.V.C. clip with necessary screws. (i) 15 mm

(iii) 25 mm

(vii) 65 mm

Cutting out pipe and making threads. (i) Upto 20 mm dia.

(ii) Above 20 mm upto 32 mm dia.

(iii) Above 32 mm upto 50 mm dia.

Dismantling and refixing bib cock or stop cock. (i) 15 mm

Rewashering stop cock/ bib cock/ push cock/ pillar cock including gland (i)15 mm

Renewing brass spindle and valve of stop cock/bib cock/push cock/pillar (i) 15 mm

Supplying, fitting and fixing low-down cistern parts. (i) Internal fittings for cistern complete of approved make.

(ii) Outlet Assembly

(iii) Intlet Assembly

(iv) Rubber Kid

(v) Knob

(vi) Brackets (pair)

(vii) CP Flush Bend (local) best quality b) E. W.C. & Anglo-Indian W.C.

Renewing bolts and nuts for cistern.

Renewing high pressure polythene ball cock of approved quality with polythene ball and aluminium lever complete for pipe of dia.: (i) 32 mm

Dismantling E.P. or Anglo-Indian W.C.

Refixing E.P. or Anglo-Indian W.C.

Dismantling urinal.

Refixing urinal.

Dismantling flush pipe of water closet.

Refixing flush pipe of water closet.

Dismantling and refixing marble or mosaic partition.

Removing chokage of water closet.

Removing chokage of urinal and waste trap.

Repairing C.P. hinges of W.C. seat.

Repairing W.C. seat with brass plate and screws.

Rectifying leakage of W.C. by new joints by methor mistry.

Renewing best quality C.P. hinges for mirror.

Renewing rubber buffer with brass screws.

Dismantling wash basin with brackets with or without waste fittings.

Refixing wash basin with brackets with or without waste fittings.

Dismantling sink with brackets with or without waste fittings. (ii) Above 450 mm and upto 600 mm length

Refixing sink with brackets with or without waste fittings.(ii) Above 450 mm and upto 600 mm length

Renewing 32 mm N.P. waste fittings for wash basin including coupling C.P. chain and rubber plug.

Dismantling pillar cock of wash basin.

Refixing pillar cock of wash basin.

Dismantling H.C.I. pipe with fittings including melting lead caulked joints.(iv) 150 mm

Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989/ 2009 and I.S. 1729/2002 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the center line of the total pipe line in fitted condition including specials,payment for specials & Painting will however be paid seperately).(b) With lead caulked joints. (i) 150 mm dia. (internal)

Supplying, fitting & fixing Cast iron single branch equal with door conforming to I.S. 1729/2002 including joining and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately). (b) With lead caulked joints(i) 150 mm dia.

Supplying, fitting & fixing Cast iron double branch equal with door conforming to I.S. 1729/2002 including jointing and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately). (b) With lead caulked joints (i) 150 mm dia.

Supplying, fitting & fixing H.C.I. bend with door conforming to I.S.S. including jointing complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately). (b) With lead caulked joints (i) 150 mm dia.

Refixing H.C.I. pipe with fittings including lead caulked joints (with the old molten lead).(iv) 150 mm

Renewing lead caulked joints for H.C.I. pipe with new gaskets. (i) 150 mm (2.07 kg of lead)

Renewing cast iron inspection door with bolts and nuts complete for fittings of 50 mm dia. to 150 mm dia. H.C.I. pipe

Dismantling yard gully with gratings.(iv) 300 mm

Refixing yard gully including necessary cement brick work (4:1) and 13 mm thick cement plaster (2:1) etc. complete including mending good all damages. (Cement work will be paid seperately).(iv) 300 mm

Removing chokage of yard gully.

Removing chokage of H.C.I. or S.W. pipe with split bamboo.(b) Over ground

Scraping the hard scum of 'S' trap carefully to render the flushing flow easy after soaking with strong acid through W.C. pan on floor and also cleaning through flanged junction door underneath the ceiling including necessary scafolding and resetting the flanged door watertight by putty joints by methor labour.

Dismantling & Refixing pit cover

Cleaning silt of inspection pit

Removing sludge from septic tank, soak well etc. by methor labour including disposal of the same outside the compound as directed.(d) Upto 100 users:(i) Within a lead of 150 metre

Cleaning soak pit by removing the top slab and replacing inner filling with jhama bats and repairing the pit as necessary including fitting the slab.

Cleaning silt of master trap pit.

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (b) 20 mm thick plaster

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (a) One Coat i) Water based interior grade Acrylic Primer

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats)ii) Luxury Quality

Dismantling artificial stone flooring upto 50 mm. thick by carefully chiseling without damaging the base and removing rubbish as directed within a lead of 75 m.

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor) (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. (B) Light Colour

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal /Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge.

Cutting holes and subsequent mending good damages. (a) Diameter upto 150 mm.(ii) In concrete work (plain or R.C.) [Cement- 3.0 Kg/Mtr]

Adding 18% GST on item serial no. 1 to 58.

Addding 1% CESS on item serial no. 59.