SPL REPAIR TO CERTAIN ROADS, FOOTPATHS AND ALLIED WKS AT RX STN (ARJUN GANJ) UNDER GE (WEST) LUCKNOW

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with broom and and finally fanning the cleaned surface with gunny bags to remove all loose dirt/ dust etc and applying evenly a priming / tack coat with bituminous primer using paving bitumen VG 10 @ 5Kg /10 sqm complete all as specified and directed.

M & L for 30 mm thick consolidated thickness bituminous premix semi dense asphaltic concrete with 5.50 % binder content (bitumen of grade VG-30) by weight of total mix, laid by mechanical paver, rolled and compactad to required camber and gradient complete all as specified and as directed.

M&L for premix bitumen macadam laid / rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) by using paving bitumen, any penetration @ 4% by weight of total mix complete all as specified and directed.

Supply and fixing cat eyes with two way solar reflective type with 30 mm length double shank of plastic body of size 100mm x 110mm x 20mm (overall height 50 mm) and with PAMA striplens reflector and weight 164 gram fixed with special epoxy chemical as per manufactures instructions.

Supply and fixing aluminium-alloy body Solar stud with following specification :- (a) Solar panel Mono-Crystalline Solar 2.4V/0.3 Watt and having charging capacity at a very low sunlight. (b) Red colour Six Super Bright LEDs with 10000 to 18000 mcd (Millicandela) 8 mm fitted at appropriate height for clear blinking point. (c) 1.2V Ni-MH or Ni-CD rechargeable battery capacity 1300 mAh. LSD (Low Self Discharge technology) fitted inside solar stud. (d) Working time 3 to 4 days successively after the battery is fully charged. (e) Charging time for full charge One full sunny day. (f) Working temperature : 10 to 75 Degree Celcius. (g) Flash rate : 60 to 70 times per minute normally. (h) Brightness sensitive auto-switch, automatically turns on at dusk and turns off at dawn to ensure easy and safe night driving. (j) High visibility LEDs help ensure easy and and safe night driving from a distance of 1000-1100 Meters approx. (k) Solar stud should be free of maintenance and operational in all weather conditions. (i) The PCB board and solar panel should be sealed in Poly Carbonate case for extra waterproofing and high/low temperature protection. The logo of the manufacturer should be embossed on front side of the body to ensure genuinesess. Dimension/Size of the Solar Std should be 125 mmx125mmx25 mm body, with shank height 65 mm (Total height 90 mm including shank) (m) Weight of the Solar Stud should be 650 Gram approx. (n) Minimum 150 gram of a special epoxy chemical should be used per pcs to fix the stud on the road surface.

M & L for providing and laying 2.5 mm thick hot applied thermo plastic road marking paint on roads, pavements and the like not exc 10cm wide in uniform thickness with glass beads as per clause no 803 of MORTH specification including cleaning of roads surface, heating the materials with in specified tempreture limits for marking with all necessary arrangements required complete all as specified and directed.

M & L for providing and laying 2.5 mm thick hot applied thermo plastic road marking paint on roads, pavements and the like exc 10cm wide in uniform thickness with glass beads as per clause no 803 of MORTH specification including cleaning of roads surface, heating the materials with in specified tempreture limits for marking with all necessary arrangements required complete all as specified and directed.