GE/CHM-83/2021-2022 SPL REPAIR TO TOILET BLOCK AND OTHER MINOR WORKS UNDER AGE B/R III CHANDIMANDIR

Amount

Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutter(s) (without taking off shutters from the frame), complete all as specified.

Taking down chowkhats or frame exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter(s) (without taking off shutters from the frame), complete all as specified and directed.

Supply and fixing solid PVC frame having profile 105mm x 60mm , single rebate, made out of solid PVC foam with homogenous fine cellular structure having density 750, smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal screws complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

Supply and fix, factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified & directed.

Factory made, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30 mm thick, ISI marked complete all as specified and directed.

Supply and fix factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifiecation & drawing complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing mentioned on Srl Page No. 134, 135 and 146 of SSR Part-II including aluminum iron mongery. MAKE : M/S RAJSHREE PLASTIC WOOD, INDORE/SINTEX

Excavation in trenches not exceeding 1.5m wide and n.exceeding 1.5m deep for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil all as specified & directed by Engineer-in-Charge.

Rough excavation not exc 1.5 m deep and getting out in soft and loose soil complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil all as specified.

Removal of excavated material to distance not exceeding 250 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point in soil, complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour 75mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in top surface finished fair and even without using extra cement complete all as specified and directed.

Material and labour 25mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in flooring, finished fair and even without using extra cement complete all as specified and directed.

Material and labour providing cement concrete type D2, 1:4:8 using 20 mm graded stone aggregate, as in foundation, mass concrete etc., complete all as specified and as directed

Material and labour for 75mm thick PCC1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base etc, complete all as specified and directed.

Material and labour providing cement concrete type D2, 1:5:10 using 40 mm graded stone aggregate, as in foundation, mass concrete etc., complete all as specified and as directed

Material and labour, plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protections, 50mm thick, finished fair and even without using extra cement, with 10mm wide joints to full depth @ 3m c/c and at corners, filled with mastic mortar, complete all as specified and directed.

Material and labour reinforced cement concrete 1:2:4, Type B1 (using 20mm graded aggregate) as in beams, lintels over 1.5 metre span and the like complete all as specified and directed (reinforcement shall be measured and paid for separately).

Material and labour mild steel TMT bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.

Material and Labour mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified & directed.

Material and labour form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for roughly finished flat surfaces of concrete, all as specified.

Material and labour for form work to soffits of suspended slabs such as roof slabs rough finished surface of concrete flat not exc 200mm thick complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified.

Material and Labour brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed.

Material and Labour brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

Material and Labour Brick work with sub class ‘B’ bricks of class designation 10 (min. compressive strength 100Kg/sqcm) old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed.

Dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off the premises complete as specified and directed.

Material and labour glazed ceramic tiles, coloured in vertical surface 350mm x 450mm x 7mm, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Material and labour non skid ceramic coloured tiles, joint free, first quality, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 Square metre but not exceeding 0.18 Square metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.

Material and labour 10mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Material and labour 15mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Material and labour Rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), inclunding using water proofing compound complete all as specified. Note : WPC shall be measured and paid separately.

Material and labour 5mm thick rendering in Cement and Sand mortar 1:3 concrete surfaces as in ceiling / chajjas facia at any position finished even and smooth without using extra cement complete all as specified and directedng

Material and labour 15mm thick rendering cement plaster in Cement and Sand mortar 1:4 over brick or concrete surfaces finished fair and even without using extra cement complete all as specified and directed

Material and labour 10mm thick rendering in Cement and Sand mortar 1:4 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Material and labour Two coats of white wash on old wall surfaces including preparation of wall surfaces complete all as specified and directed.

Material and labour Two coats of white wash on old ceiling/chajja surfaces including preparation of celing surfaces complete all as specified and directed.

Material and labour Three coats of white wash on new wall surfaces including preparation of wall surface complete all as specified and directed.

Material and labour Three coats of white wash on new ceiling/chajja surfaces including preparation surface of complete all as specified and directed.

Material and labour preparation of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

Material and labour preparation of old plastered or un-plastered surfaces of walls and applying two coats of cement base paint, upto height of three storey building complete all as specified and directed.

Material and labour preparation of old plastered or un-plastered surfaces of walls and applying one coat of cement base paint, complete all as specified and directed.

Material and labour for two coats of colour wash over one coat of white wash on wall surfaces including preparation of new surfaces complete all as specified and directed.

Material and labour for two coats of colour wash over one coat of white wash on ceiling surfaces including preparation of new surfaces complete all as specified and directed.

Material and Labour two coats of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed.

Material and Labour preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and Labour two coats of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth over a coat of red oxide including preparation of new surfaces complete all as specified & directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, or edges of landings etc. and cutting chases for concealed water tubing, concealed conduit wiring, etc, and making good, cutting not exceeding 10 cm girth, in brick walls, complete all as specified.

Supply and fix, in repair Steel water tubes, 15mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, including taking down old tubing complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.

Supply and fix, Steel water tubes, 15mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.

Supply and fix, in repair Steel water tubes, 20mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, including taking down old tubing complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.

Supply and fix, Steel water tubes, 20mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.

Supply and fix, Steel water tubes, 25mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, complete all as specified and directed.

Supply and fixing wash hand basin, vitreous china, flat back , white , of size 550X400mm, including angle brackets, fixed as in repair complete all as specified and directed.

Supply and fix in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)fixed as in repair with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface,complete all as specified.

Supply and fix in repair, vitreous china squatting pan "orissa" pattern, size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) and making good to the floor complete all as specified & directed by Engineer-in-charge.

Supply and fix, vitreous china squatting pan "orissa" pattern, size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) and making good to the floor complete all as specified & directed by Engineer-in-charge.

supply and fix factory made box type steel ventilator fixed type includig one shop coat of red oxide primer, hinges, tower bolts 100mm, steel handle and steel peg stay complete without glazing bars devetailed or welded, in repair complete all as specified & directed.

supply and fix factory made box type steel ventilator fixed type includig one shop coat of red oxide primer, hinges, tower bolts 100mm, steel handle and steel peg stay complete without glazing bars devetailed or welded, complete all as specified & directed.

Supply and fix framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165 complete all as specified & directed by Engineer-in-charge.

Supply and fixing bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; chains; hand made sliding bolts; clamps; hold fasts; wall ties; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles confirming to Fe-410-O or Fe-310-O complete all as specified.

Supply and fixing mild steel framed work as in doors or gates of angles or other sections with gusset plates complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with including hooks and hinges (excluding of covering steel sheeting) fastening, locking arrangement, etc conforming to Fe-410-O or Fe-310-O all as specified and directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically (in sunken portion) and removing debris upto 2.5 Km from the site and depositing where directed complete all as specified by Engr-in-Charge.

Material and labour for plain cement concrete 1:7:12 type F-2 using 40mm graded brick aggregate as in sunken floor filling and mass concrete, , complete all as specified & directed.

Material and labour water proofing treatment to SUNKEN PORTION and adjoining walls of kitchen, WC, Bath & Toilet, etc, as follows, complete all as specified & directed :- (a) 15 mm thick plaster in cement mortar (1:3) mixed with WP compound as per manufacturer's instructions shall be provided on sunken portion after roughening of surfaces. (b) Apply cement slurry to the surface @ 0.488 kg /Sqm of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.253 kg/Sqm and the surface will be allowed to air cure for 4 hours. (c) Apply another layer of cement slurry @ 0.242 kg/Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.126 Kg/Sq. m and the surface will be allowed to air cure for 4 hours. (d) Pond curing of sunken portion for minimum of 48 hours. (e) Paste one layer of 3mm thick APP membrane with bitumen by torch application to the treated sunken portion. (f) Joints/ traps /WC /soil pipes shall be properly sealed with approved sealing compound.

Supply and fix PVC (SWR) pipe, 110mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors, fixed in repair complete all as specified and directed.

Supply and fix PVC (SWR) pipe, 110mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

Supply and fixing PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed in repair complete all as specified and directed

Supply and fixing PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed

Supply and fixing PVC (SWR) rain water pipe, 75mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed in repair complete all as specified and directed

Supply and fixing PVC (SWR) rain water pipe, 75mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed

Supply and fix PVC (SWR) pipe, 75mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) bends any radius fixed in repair complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

Supply and fix 75mm bore PVC (SWR) bends any radius fixed in repair complete all as specified and directed.

Supply and fix 75mm bore PVC (SWR) bends any radius with over access door complete all as specified and directed.

Supply and fix 110 mm dia PVC (SWR) junction single ( single T ) equal or unequal fixed in repair complete all as specified and directed.

Supply and fix 75 mm dia PVC (SWR) junction single ( single T ) equal or unequal fixed in repair complete all as specified and directed.

Supply and fix 110mm PVC (SWR) branch piece,single (single Y) equal or unequal complete all as specified and directed.

Supply and fix 110 mm dia PVC (SWR) vent cowl any radius complete all as specified and directed.

Supply and fix PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed stone ware / AC/RCC drain pipe etc) internal dia of pipe 200mm. Set in cement mortar including PCC packing in bed and hunching complete all as specified and directed (excavation and earth work shall be measured and paid separately).

Material and labour for RCC pipes class NP2 200mm dia bore, with collars, ISI marked, jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed (excavation, earthwork and PCC shall be measured and paid for separately)

Material and labour for plain cement concrete type C-2, 1:3:6 using 40mm graded crushed stone aggregate as in bed to drain pipes including packing under & haunching against the sides of pipes (110mm bore pipe) after the pipe are laid and tested complete all as specified and directed.

All as per serial item No 87 herein before but 150mm bore of pipe –ditto-

All as per serial item No 87 herein before but 200mm bore of pipe –ditto-

Material and labour for factory made RCC (Medium duty), M-35 reinforcement steel as per IS 456, pre cast man hole covers of size 600mm x 600mm x 80mm with plain faces, including MS frame and RCC frame, set in position including demoliton of old unserviceable RCC cover complete and removal of debris complete all as specified.

Supply and fixing stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm including fixed with tinned tacks / stainless steel wire staples, fixed in repair, complete all as specified & directed.

Hacking out old broken glasses (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified & directed by Engineer-in-charge.

Supply and fix 3mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

Supply and fix 4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

Supply and fix 2000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, PTMT 20mm dia ball valve, including dismantling of existing water tank and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.

Supply and fix 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, PTMT 20mm dia ball valve, including dismantling of existing water tank and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.

Supply and fix 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, PTMT 20mm dia ball valve, including dismantling of existing water tank and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.

Supply and fix bib taps brass, fancy type, short body with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.

Supply and fix bib taps brass, fancy type, short body with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, complete all as specified and directed.

Supply and fix for 15mm bore pillar tap, long body with quarter turn, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repair, complete all as specified and directed.

Supply and fix for 15mm bore pillar tap, long body with quarter turn, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

Supply and fixing grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and directed.

Supply and fixing in repair chromium plated, fancy type shower rose with swivel joints 125mm dia with shower arm brass CP 195mm long with bend of 45 degree and fixing to steel pipe 15mm bore and fixed complete all as specified and directed.

Supply and fix swivel shower of PTMT any colour (minimum weght 40 gms), fixed as in repair complete all as specified & directed.

Supply and fix PTMT shelf 450 mm x 124 mm any colour with brass chromium plated screws & PVC rawl plugs (Minimum weight 300 gm) complete all as specified and directed.

Supply and fix towel ring of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90gms), complete all as specified and directed.

Supply and fixing towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190gms), complete all as specified and directed.

Supply and fix stop valve (concealed type), chromium plated, fancy type, screwed down, high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.

Supply and fix angular stop cock, brass, cast copper alloy, chromium plated fancy type, screwed both ends for iron pipe or for union, suitable for 15mm bore pipe, fixed in repair complete all as specified and directed.

Supply and fix 15mm bore angular stop valve of PTMT any colour high presseure screwed for iron pipe and fixed (minimum weight 90gms), complete all as specified and directed.

Supply and fix 15mm bore stop valve of PTMT any colour high presseure screwed for iron pipe and fixed (minimum weight 90gms) , complete all as specified and directed.

Supply and fixing stop valve, cast copper alloy, chromium plated, fancy type screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for union, complete all as specified & directed by Engineer-in-charge.

Supply and fixing stop valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for union, fixed as in repair complete all as specified & directed by Engineer-in-charge.

Supply and fixing stop valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for union, complete all as specified & directed by Engineer-in-charge.

Supply and fixing stop valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 20mm bore iron pipe or for union, fixed as in repair complete all as specified & directed by Engineer-in-charge.

Supply and fixing stop valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 20mm bore iron pipe or for union, complete all as specified & directed by Engineer-in-charge.

Supply and fixing stop valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 25mm bore iron pipe or for union, complete all as specified & directed by Engineer-in-charge.

Supply and fix Aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified.

Supply and fix Aluminium, anodized barrel tower bolts of extruded section and fixed, 150 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified.

Supply and fix Aluminium, anodized barrel tower bolts of extruded section and fixed, 150mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified.

Supply and fix Aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified.

Supply and fixing Mild steel sliding door bolts (ISI Marked), 250mm long plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, all as specified & directed by Engineer-in-charge.

Material and labour for floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring, fixed in floor (140mm size), fixed as in repair complete all as specified and directed.

Supply and fixing for tubular towel rail Brass CP, 20mm dia, D type, 60cm long between flanges fixed with chromium plated brass screws fixed as in repair complete all as specified & directed by Engineer-in-charge.

Supply and fix PVC (SWR) floor trap, plain with grating including jointing with solvent cement 100mm bore, including jointing to waste pipe set in cement concrete type , fixed as in repair complete all as specified.

Supply and fix PVC (SWR) floor trap, plain with grating including jointing with solvent cement 100mm bore, including jointing to waste pipe set in cement concrete type , complete all as specified.

Supply and fixing vitreous china bowl urinal flat back, half stall type, white with grating and union for discharge pipe including all fixing accessories and waste pipe, fixed as in repair complete all as specified and directed.

Supply and fix viterous china bowl urinal flat back, size of 465 x 355 x 265mm white (Minimum) with grating and union for discharge pipe (excluding providing & fixing plugs, waste pipe , flushing cistern, waste pipe) including 60mm long brass screws, complete all as specified & directed by Engineer-in-charge.

Supply and fixing for CP pressure jet for western type water closet with PVC connections 600 to 900mm long including brass head screw and suitable washer, fixed as in repair, complete all as specified & directed by Engineer-in-charge.

Supply and fix PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend, set with concrete and making good to floor, fixed in repair complete all as specified & directed.

Supply and fix PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend, set with concrete and making good to floor, complete all as specified & directed.

Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 mm fixed in repair, complete all as specified and directed.

Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 mm , complete all as specified and directed.

Supply and fix Butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified.

Supply and fixing butt hinges (ISI marked) 100mm size, of extruded aluminum alloy with galvanised mild steel hinge pin, anodised, type C-21, complete all as specified and directed.

Supply and fix Butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 75mm size, ISI marked, complete all as specified.

Supply and fix in repair 600mm long stainless steel peg stay complete all as specified and directed.

Supply and fix 32mm dia waste coupling / waste fitting of PTMT any colour high-pressure screwed for iron pipe and fixed (minimum weight 45 gms), fixed as in repair complete all as specified and directed.

Supply and fix 32mm dia waste coupling / waste fitting of PTMT any colour high-pressure screwed for iron pipe and fixed (minimum weight 45 gms), complete all as specified and directed.

Supply and fix in repair stainless steel soap dish any type fixed to plugs with screws complete all as specified and directed.

Supply and fix pre-painted galvalume aluminium zinc (AZ-70) coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.

Surface excavation to required camber and gradient not exceeding 30 cms deep and averaging 15cms deep and getting out in any type of soil, complete all as specified.

Material and labour providing cement concrete 1:2:4, type B-1 using 20mm graded stone aggregage as in roof kerb or mud stops, rounded and chamfered on edge complete all as specified and directed.

Material and labour for machine coloured pressed precast concrete interlocking paver block, with grey cement and no pigment, any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade, set and jointed in neat cement slurry over 25mm thick sand cushion complete all as specified and directed

Material and labour for machine coloured pressed precast concrete interlocking paver block, with grey cement and no pigment, any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade, set and jointed in neat cement slurry over 25mm thick sand cushion complete all as specified and directed

Material and labour damp proof coarse to horizontal or vertical surface in plain cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate), 40mm thick, including necessary form work, mixed with water proofing compound over complete all as specified & directed.

Material and labour Bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5kg. per sq. m per coat complete all as specified and directed

Material and labour Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Material and labour for Hard core of broken stone or boulders of gauge of guage n.exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm including applying bituminous primer @ 0.40 ltrs per square meter over clean RCC/plastered roof surfaces and adjoining vertical surfaces complete all as specified.

Material and labour 3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions and finished with applying one coat of bituminous aluminium paint @100gm/sqm on top of membrane, complete all as specified & directed.

Material and labour for plain cement concrete type C-2, 1:3:6 using 40mm graded crushed stone aggregate as in bed to drain pipes including packing under & haunching against the sides of pipes (150mm bore pipe) after the pipe are laid and tested complete all as specified and directed.

Material and labour for salt- glazed stoneware drain pipe grade ‘A’ 150mm bore, ISI marked, jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed.

Material and labour for Precast cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in cover slabs (for manholes etc) set in cement mortar (1:4) complete all as specified and directed.

Material and labour cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in plain cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required, internal dia of pipe 150mm all as specified and directed.

Material and labour for PCC (1:3:6) type C-2 using 20 mm graded stone aggregate as in surface channels, benching and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds , mitred /stopped ends etc complete all as specified & directed.

Supply and fix, powder coated aluminum frame/ chowkhat for doors, windows, partition etc with one or more rebates including joinging cleats for fixing etc standard anodized aluminum section, powder coating not less than 50 micron, complete all as specified and directed Note : Hinges, shutters and lugs shall be measured and paid separately "as supply and fix" under respective items.

Supply and fix, powder coated (thickness or powder coating of any colour coating not less than 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/metre including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, powder coated aluminum snap beading screws etc. complete all as required and directed by Engineer-in-Charge.

Supply and fix 18/19mm thick pre laminated particle board (ISI Marked), interior grade, pre laminated both side with decorative choice lamination as in aluminum door complete all as specified and directed .

Supply and fix 5.5mm thick tinted sheet glass fixed to aluminum frame work with standard anodized aluminum snap beading, rubber packing, aluminum screws etc in panels exc 0.5 Square metre in each pane, complete all as specified & directed. NOTE:- Aluminum beading rubber packing and screws etc are not included in this item and the same paid separately under respective items.

Material and labour 5mm thick printed PVC sheet in strips & channel feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining, and solid PVC partitions inclusive of solvent cement and fixing at site, fixed in repair complete all as specified and directed.

Material and labour PVC sheet fillet 35mm wide, 5mm thick for wall paneling, fixed in repair complete all as specified and directed.

Taking down carefully aluminum/copper point wiring on & including hard wood battens, surface conduit and board/blocks etc or through conduits for light , socket or power point ,fan point complete incl fitting such as switches ,sockets, ceiling rose , holder socket, light fitting, regulators and making good disturbed surfaces of wall, floor , ceiling etc and removing materials (other than those for which credit has been given by the contractor) to the MES stores yard for keeping in safe custody complete all as specified and directed.

Material and labour point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit terminated on and including new steel sunken boxes 1.2mm thickness covered with provision of 3mm thick plastic laminated sheet, comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original finishes surface and nothing extra shall be paid on this account.

All as per serial item 167 herein before but for socket outlet 3 pin 5 Amps on same board complete all as specified and directed

All as per serial item 167 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed

All as per serial item 167 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSH cable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor

Supply & Fixing for switch piano, flush type, 6 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge

Supply & Fixing for switch piano, flush type, 16 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge

Supply & Fixing for sockets outlet multipurpose 5 pin, 6 Amps flush type all as specified and directed by Engineer-in-charge

Supply & Fixing for sockets outlet multipurpose 2 in 1 pin, 5 and 16 Amps flush type ISI marked all as specified and directed by Engineer-in-charge

Supply & Fixing for ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge.

Supply and fixing for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.

Supply and fixing for 9W LED BULB B22 WHITE all as specified and directed.

Disconnecting the power supply and taking down carefully by unscrewing from boards fittings and fixtures such as DBs, Junction Box, Panels of any size complete with all MCCB's ,MCB's etc and remving from site, all as specified and directed by Engr-in charge.

Supply and fixing, MCB distribution board sheet steel for DBs phosphatised powder coated, double door, neutral link and earth bar, SPN, 8 way with 200 Amp rated bus bar, 230 volt complete all as specified & directed.

Supply & Fixing for MCB ,SPN, 240 volt, 40Amps, 10 KA , 'C' series characterstic including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engineer-in-charge.

Supply & Fix MCB ,SP , 240 volt, 6Amps to 32Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed

Taking down carefully old copper or aluminium sub main wiring of any Nos of wiring and size with earth wire on wooden batten/ surface conduit/ casing- capping complete with its all accessories and making good disturbed surfaces of wall , floors etc complete all as specified & directed by Engineer-in-charge.

Supply and fixing sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 6 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 6 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through and including PVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfaces after taking out old unserviceable sub main wiring complete by provding by wall putty/POP after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed. Note : (i) For the purpose of measurement, 2 single core of 6 sqmm and one single core of 06 sqmm cable along with PVC conduit shall be considered as 1 running metre.

Supply and fix LED light fittings 1 x 20 watt, 220 V, AC decortative box type with driver, holder incluidng LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fix LED light fitting mirror type with outpput diffuser2 feet 10 Watt, 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply & fixing of 20 to 25 mm dia, rigid non metallic PVC concealed conduit medium grade heavy duty, 'ISI marked', inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddless, pipe hooks etc for wiring, complete all as specified

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth complete all as specified & directed by Engineer-in-charge.

PARVEEN KUMAR AND SONS

sham enterprises

M/S Dhanpati Construction

Premier Constructions

Satyadev Builders