ELECTRICAL WORKSHOP ITEMS

Amount

A. Design, engineering, manufacture, procurement of materials and bought out components, assembly at shop, inspection, testing at manufacturer's works, painting (primer+ finish coat),packing and supply of WORKSHOP EQUIPMENT(Electrical items) including supply of all commissioning spares, special tools & tackles (if applicable), first fill of consumables (such as oil &lubricants, coolents if applicable etc.),erection material and drawings and documents as per attached Annexure-I for all supplies and services covered as per the enclosed Scope of work, technical specification (Doc. No. PC161/PC164/PC171-TS-0813), data sheets, instructions to vendors etc. and other codes and standards attached or referred. (GORAKHPUR + SINDRI+ BARAUNI )

Precise Multi-meter

Leakage Clamp Meter (AC/DC mA current measurement)

Digital Clamp Meter AC/DC

Digital Micro ohm meter

LCRQ Meter

Primary Current Injection Test Kit

Secondary Current Injection Test Set

Universal Protection Relay Test System ((2 Current + 2 Voltage channel)

Oil Filtration Machine along with Separate BDV Test Kit

Auto Transformer (VARIAC)

Single Phase Auto Transformer

Three Phase Auto Transformer

Non- Contact High Voltage Detector

Non-Contact High Voltage Detector for 33KV

Non-Contact High Voltage Detector for 132KV

Circuit Breaker Analyzer System

Vacuum Interrupter Tester

Partial Discharge Test Set

70 KV AC/DC Hipot Test Set

Three Phase Power Analyser (for motor Upto 180 KW)

Battery Charge Discharge Set

Battery Analyser

Sound Level Meter

HT Megger (Regular ) - up to 10 KV

LT Megger (Regular ) - 50 to 1000V

Earth Megger (Regular )

Oscilloscope ( 4 Channel)

Non-Contact Tachometer

Regulated DC Power Supply (upto 220V DC)

Phase sequence meter

Stroboscope

Temperature Gun (non contact type)

ELCB tester

Scope Meter

Vibration Pen

Thermography Camera

DC Earth Fault Locator

Discharge Rod

Milli Amps Tong Tester

Contact Resistance Kit

Motor Checker

Oven For Motor Heating

Tong Tester

Null Deflection Meter/ Galvanometer

DC Voltmeter range 0-.3-1-3-10 V Substandard meter

DC Volt meter 0-30-100-300-1000 V Substandard meter

DC Ampere meter YEW make range 0-30-100 A Substandard meter

Lux Meter

Crimping Tool

Hand Operated(2.5 to 400Sq mm)

Hydraulic (120-1000Sqmm)

Hand Drill Machine (230VAc)

Torque Wrench (12-68 Nm make: Reputed)

Digital Vernier Calipers (Battery Operated hand tool)

B. ALL RELATED SERVICES

Unloading at site, handling, transportation to store and from store to respective workshop building, storage at site, assembly at site, installation, testing, pre-commissioning, hook-up, touch up painting, commissioning, performance test run, handing over to client and other field works including all civil-structural work for the abocve listed items, as per the enclosed technical specification (Doc. No. PC161/PC164/PC171-TS-0813), instructions to vendors, data sheets etc. (FOR GORAKHPUR)

Unloading at site, handling, transportation to store and from store to respective workshop building, storage at site, assembly at site, installation, testing, pre-commissioning, hook-up, touch up painting, commissioning, performance test run, handing over to client and other field works including all civil-structural work for the abocve listed items, as per the enclosed technical specification (Doc. No. PC161/PC164/PC171-TS-0813), instructions to vendors, data sheets etc.(FOR SINDRI)

Unloading at site, handling, transportation to store and from store to respective workshop building, storage at site, assembly at site, installation, testing, pre-commissioning, hook-up, touch up painting, commissioning, performance test run, handing over to client and other field works including all civil-structural work for the abocve listed items, as per the enclosed technical specification (Doc. No. PC161/PC164/PC171-TS-0813), instructions to vendors, data sheets etc.(FOR BARAUNI)

C. Training of Owner's personnel:

Training of client Personnel at each site for 2(TWO) days for Electrical engineer/operating staff for electrical workshop items as listed above at A. (FOR GORAKHPUR)

Training of client Personnel at each site for 2(TWO) days for Electrical engineer/operating staff for electrical workshop items as listed above at A. (FOR SINDRI)

Training of client Personnel at each site for 2(TWO) days for Electrical engineer/operating staff for electrical workshop items as listed above at A. (FOR BARAUNI)

Rate of GST (Applicable on the Total Package Price)

WTC Enterprises Pvt Ltd