Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹39.8 LAccepted-AOC | 1 | Accepted-AOC Being lowest and reasonable | |
| 2 | 2₹42.9 L+₹2.6 L (6.55%)Rejected-Finance H NO 8 7 66 PLOT NO 76 VENTURE 2 HASTINAPURAM CENTRAL HYDERABAD 500 079 | HYDERABAD | HYDERABAD | TELANGANA | 500079 | 2 | Rejected-Finance Not being the lowest bidder | |
| 3 | 3₹43.1 L+₹2.8 L (6.89%)Rejected-Finance | 3 | Rejected-Finance Not being the lowest bidder | |
| 4 | 4₹46.4 L+₹6.1 L (15.1%)Rejected-Finance | 4 | Rejected-Finance Not being the lowest bidder |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
13 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(I) R AND D RCI, HYDERABAD
GE(I) RND RCI, MILITARY ENGINEER SERVICES, VIGNYANAKANCHA, RCI, HYDERABAD
ADDITION ALTERATION TO BUILDING No. 3025 AT RCI HYDERABAD
2022_MES_552118_1
8750
Open Tender
Civil Works
Item Rate
150 days
GE(I) R AND D RCI
MES enlisted Class D category a i Un enlisted Meeting enlistment criteria of D class in MES and having no recovery pending. For further details ref NIT
8 documents required · 8 mandatory
₹500
Yes
GE(I) R AND D RCI, HYDERABAD
₹88,000
Yes
7 Dec 2022
15 Sept 2022
15 Oct 2022
15 Sept 2022
13 Oct 2022
29 Sept 2022
Amount
Taking up or down steel tubing 15mm bore alongwith connections and fittings, including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down steel tubing 20mm bore alongwith connections and fittings, including cleaning for refixing or removal to store complete all as specified and directed.
M&L for galvanised steel water tubing, 15mm bore, medium grade with and including necessary fittings, fixed to walls/ laid in floors complete all as specified and directed.
M&L for galvanised steel water tubing, 20mm bore, medium grade with and including necessary fittings, fixed to walls/ laid in floors complete all as specified and directed.
M&L for cutting chases in brick walls for concealed water tubing, cutting exceeding 20cm girth and making good in CM (1:3) after inserting pipes to match with existing surroundings complete all as specified and directed.
Dismantling water tanks, capacity exceeding 1000 litres and not exceeding 2000 litres and removing to store complete all as specified and directed.
M&L for rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) 1000 litres capacity, hoisted and fixed in position complete all as specified in SSR Part I and as directed.
M&L for rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) 2000 litres capacity, hoisted and fixed in position complete all as specified in SSR Part I and as directed.
M&L for 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball (Minimum weight 210 grams) screwed for iron pipe including taking down old unserviceable one complete all as specified and directed.
M&L for gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe including taking down old unserviceable one complete all as specified and directed.
M&L for PVC (SWR) pipes 110mm bore, single socketed in any length, with rubber ring joints fixed to walls including taking down old unserviceable one complete all as specified and directed.
M&L for PVC (SWR) pipes 75mm bore, single socketed in any length, with rubber ring joints fixed to walls including taking down old unserviceable one complete all as specified and directed.
M&L for PVC (SWR) bends 110mm bore, any radius including taking down old unserviceable one complete all as specified and directed.
M&L for PVC (SWR) bends 75mm bore, any radius including taking down old unserviceable one complete all as specified and directed.
M&L for stack clamps made out of 50x5mm flat iron including bolts and nuts for securing pipes of any dia to wall or roof complete all as specified and directed.
M&L for wash hand basin, white, vitreous china, 550x400mm size, flat back, including CP waste coupling 32mm dia, waste pipe 32mm dia, necessary PVC connections 15mm dia of suitable length including taking down old unserviceable one complete all as specified and directed.
M&L for vitreous China squatting pan ‘ORISSA’ pattern of size 580X440mm, white, with P or S Trap, integral foot rests, Indian rubber cones (nozzle of WC pan) joints between flush pipe and socket of WC Pan (excluding flushing cistern and flush pipe), fixing with and including provision of 150 mm thick Lime concrete bedding including taking down unserviceable WC and connected Items of any description complete all as specified and as directed.
M&L for vitreous China wash down water closet pan (pedestal pattern), white, excluding flushing cistern and flush pipe but including plastic seat cover black/white, closed pattern with flat bottom and cover and mild steel chromium plated hinging device including taking down unserviceable WC and connected Items of any description complete all as specified and as directed.
M&L for vitreous China Urinal, half stall type, white, including CP waste fitting, waste pipe, CP spreader, necessary PVC connection pipe etc., including taking down unserviceable one with connected Items of any description complete all as specified and as directed.
M&L for PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle with brackets and 32 mm dia PVC flush pipe including taking down unserviceable one with connected Items of any description complete all as specified and as directed.
M&L for PVC connection 15 mm bore with PTMT nuts, 900 mm long including taking down old unserviceable one complete all as specified and as directed.
M&L for 32mm dia PVC flexible waste pipe of length 90cm with connector suitable to connect with waste fitting/ coupling of WHB/ sink/ urinal etc., including taking down old unserviceable one complete all as specified and as directed.
M&L for bib taps, 15mm bore, long body, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule including taking down old unserviceable one complete all as specified and as directed.
M&L for pillar taps, 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule including taking down old unserviceable one complete all as specified and as directed.
M&L for angular stop valve, 15mm bore, long body, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule including taking down old unserviceable one complete all as specified and as directed.
M&L for concussive push button taps, 15mm bore, cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule including taking down old unserviceable one complete all as specified and as directed.
M&L for tubular towel rail, 20mm dia, D type, 60cm long between flanges including taking down old unserviceable one complete all as specified and as directed.
M&L for towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) including taking down old unserviceable one complete all as specified and as directed.
M&L for brass chromium plated shower rose, 125mm size, with or without swivel joints fixed to steel pipe or union including taking down old unserviceable one complete all as specified and as directed.
M&L for health faucet, cast copper alloy, chromium plated including flexible pipe of 1.5m length and fixing bracket including taking down old unserviceable one complete all as specified and as directed.
M&L for grating doom 125mm dia with waste hole of PTMT fixed on floor/nahani trap with cement mortar, weighing not less than 40 gms including taking down old unserviceable one complete all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar complete all as specified and as directed.
M&L for 100mm thick cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base of floors complete all as specified and as directed.
M&L for 30mm thick cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in floors, surface finished even and smooth without using extra cement complete all as specified and as directed.
M&L for non-skid coloured ceramic tiles (first quality) 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc., set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match, laid over screed bed 15 mm thick in CM (1:6) complete all as specified and as directed.
M&L for glazed ceramic, joint free tiles of size 350 x250 x7mm / 450x350x7mm thick of approved colour, print & design, as in vertical surfaces, set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the surfaces, fixed on a backing coat of 10mm thick CM (1:4) complete all as specified and as directed.
M&L for Vitrified ceramic tiles, dark shade, double/ultra charged, 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 Sqm as in floors etc., set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match, laid over screed bed 15 mm thick in CM (1:6) complete all as specified and as directed.
M&L for Vitrified ceramic tiles, dark shade, double/ultra charged, 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 Sqm as in vertical surfaces, set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match, fixed on a backing coat of 10mm thick CM (1:4) complete all as specified and as directed.
M&L for granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as in vertical surfaces, fixed on a backing coat of 10mm thick CM (1:4) complete all as specified and as directed.
M&L for PVC homogenous tiles/ sheets, 3mm thick, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors complete all as specified and as directed.
M&L for chequered cement concrete tiles 200 x 200 x 20mm thick, made with grey cement and pigments, m a c h i n e pressed, lacquer coated, as in floors etc., set, jointed and pointed in neat cement slurry, laid over screed bed 15 mm thick in CM (1:6) complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.
M&L for second class hardwood in scantlings, timber framed and fixed, clean sawn as in frames for wall panelling complete all as specified and as directed.
M&L for pre-laminated particle board, 18/19mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.
M&L for external teak wood lipping, 6mm thick suitable for 18/19mm boarding, fixed with nails complete all as specified and as directed.
M&L for seamless false ceiling with 12mm thick gypsum board with grid size 605x605mm, made up of Gl frame work comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames), area not exceeding 1.5 Sqm each complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames), area exceeding 1.5 Sqm but not exceeding 4.0 Sqm each complete all as specified and as directed.
M&L for pressed steel door frames of size 125 mm x 60mm with one or more rebates, made up of 1.25mm thick plain black mild steel sheet including necessary fixing lugs, hinges, lock strike plate complete all as specified and as directed.
M&L for 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, both faces covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.
M&L for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube complete all as specified and as directed.
M&L for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement including fixing in the frame at site as per specification & drawing complete all as specified and as directed.
M&L for plain, framed, panelled shutters 30 mm thick made up of first class hard wood (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers including fixing to chowkats complete all as specified and as directed.
M&L for butt hinges 100mm size, medium weight, cold rolled mild steel complete all as specified and directed.
M&L for butt hinges 75mm size, medium weight, cold rolled mild steel complete all as specified and directed.
M&L for 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
M&L for 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
M&L for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
M&L for powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified and directed.
M&L for powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete all as specified and as directed.
M&L for powder coated (minimum thickness of powder coating 50 micron) aluminium sliding window shutters made out of aluminium hollow sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, hinges, anodised aluminum snap beading screws etc., complete all as specified and as directed.
M&L for powder coated (minimum thickness of powder coating 50 micron) aluminium deco grill of design DG-202 complete all as specified and as directed.
M&L for 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
M&L for 4.8mm thick sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm in each pane, fixed with EPDM washers complete all as specified and as directed.
M&L for 4.8mm thick sheet glass, ordinary quality, frosted on one side, in squares not exceeding 0.5 Sqm in each pane, fixed with EPDM washers complete all as specified and as directed.
M&L for mild steel rolling shutters (sloth type) with 1.0mm thickness of lathe, with out ball bearing, gear operated type with bevel gear box and crank handle, including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete all as specified and as directed.
M&L for ball bearing for rolling shutters complete all as specified and directed.
M&L for safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in CM(1:6) complete all as specified and as directed.
Taking down cement plaster of any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.
M&L for rendering 15mm thick in CM(1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 10mm thick in CM(1:4) on fair faces of brick work or concrete surfaces, finished fair and even complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of Birla wall care putty (minimum thickness 3mm) and rubbing with emery paper to form smooth surface and applying two coats of oil emulson distemper (first quality) over a coat of alkali resistant primer complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior weather proof paint over a coat of alkali resistant primer as per manufacturer's instructions complete all as specified and as directed. MAKE: ASIAN PAINTS (APEX ULTIMA)/ BERGER PAINTS (WEATHER COAT SMOOTH)/ ICICI DULUX (WEATHER MAX EXTERIOR ACRYLIC)
M&L for complete removal of existing treatment on surfaces of ceiling by scrapping with wire brushes and washing down with water and applying two coats of distemper oil emulsion (first quality) over a coat of alkali resistant primer complete all as specified and as directed.
M&L for complete removal of existing treatment on surfaces of external walls/ceiling by scrapping with wire brushes and washing down with water and applying two coats of exterior weather proof paint over a coat of alkali resistant primer as per manufacturer's instructions complete all as specified and as directed. MAKE: ASIAN PAINTS (APEX ULTIMA)/ BERGER PAINTS (WEATHER COAT SMOOTH)/ ICICI DULUX (WEATHER MAX EXTERIOR ACRYLIC)
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint (first quality) over a coat of pink primer complete all as specified and as directed.
M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and as directed.
M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and as directed.
Taking down copper/aluminium point wiring (light, fan, socket or Power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc., and making good disturbed surfaces of walls, floors, etc., complete all as specified and as directed.
Taking down old unserviceable sheet metal enclosures/ DBs of any type including MCCB/MCBs and making good disturbed surfaces of walls etc., complete all as specified and as directed.
M&L for point wiring complete with 1.5 Sqmm ISI marked PVC insulated FRLS unsheathed multistranded copper conductor cable 1100 Volts grade drawn through and including PVC conduit (ISI) marked (not less than 20mm dia) medium grade and conduit accessories fixed on surface/ concealed in walls, ceilings, roof etc., including steel modular boxes made out of 1.6 mm CRCA sheet covered with modular plates for fixing modular switches, sockets, regulators etc., including provision of 1.5 Sqmm ISI marked PVC insulated FRLS unsheathed multistranded copper conductor cable 1100 Volts grade as earth continuity conductor (green in colour) along with wiring and connected to common earth dolly for One light/fan point controlled by one switch on independent board including cutting/casing/making holes and making good the disturbed surfaces to match with existing surfaces complete all as specified and as directed.
M&L for point wiring complete with 1.5 Sqmm ISI marked PVC insulated FRLS unsheathed multistranded copper conductor cable 1100 Volts grade drawn through and including PVC conduit (ISI) marked (not less than 20mm dia) medium grade and conduit accessories fixed on surface/ concealed in walls, ceilings, roof etc., including steel modular boxes made out of 1.6 mm CRCA sheet covered with modular plates for fixing modular switches, sockets, regulators etc., including provision of 1.5 Sqmm ISI marked PVC insulated FRLS unsheathed multistranded copper conductor cable 1100 Volts grade as earth continuity conductor (green in colour) along with wiring and connected to common earth dolly for One 3 pin socket outlet, 6 Amps point controlled by one switch on independent board including cutting/casing/making holes and making good the disturbed surfaces to match with existing surfaces complete all as specified and as directed.
M&L for point wiring complete with 1.5 Sqmm ISI marked PVC insulated FRLS unsheathed multistranded copper conductor cable 1100 Volts grade drawn through and including PVC conduit (ISI) marked (not less than 20mm dia) medium grade and conduit accessories fixed on surface/ concealed in walls, ceilings, roof etc., including steel modular boxes made out of 1.6 mm CRCA sheet covered with modular plates for fixing modular switches, sockets, regulators etc., including provision of 1.5 Sqmm ISI marked PVC insulated FRLS unsheathed multistranded copper conductor cable 1100 Volts grade as earth continuity conductor (green in colour) along with wiring and connected to common earth dolly for One 3 pin socket outlet, 6 Amps point controlled by one switch on same board including cutting/casing/making holes and making good the disturbed surfaces to match with existing surfaces complete all as specified and as directed.
M&L for point wiring complete with 2.5 Sqmm ISI marked PVC insulated FRLS unsheathed multistranded copper conductor cable 1100 Volts grade drawn through and including PVC conduit (ISI) marked (not less than 20mm dia) medium grade and conduit accessories fixed on surface/ concealed in walls, ceilings, roof etc., including steel modular boxes made out of 1.6 mm CRCA sheet covered with modular plates for fixing modular switches, sockets, regulators etc., including provision of 2.5 Sqmm ISI marked PVC insulated FRLS unsheathed multistranded copper conductor cable 1100 Volts grade as earth continuity conductor (green in colour) along with wiring and connected to common earth dolly for One 3 pin socket outlet, 16 Amps point controlled by one switch on independent board including cutting/casing/making holes and making good the disturbed surfaces to match with existing surfaces complete all as specified and as directed.
M&L for modular switch 1 way 6A, 240 Volts, single pole, 1 module complete all as specified and directed.
M&L for modular switch 1 way 16A, 240 Volts, single pole, 1 module complete all as specified and directed.
M&L for modular socket, multi purpose, 3 pin, 6A, 240 Volts, single pole, 1 module complete all as specified and directed.
M&L for modular socket, multi purpose, 5 pin, 6/16A, 240 Volts, single pole, 1 module complete all as specified and directed.
M&L for submain wiring with 2 runs of 2.5 Sqmm ISI marked PVC insulated FRLS unsheathed multistranded copper conductor cable 1100 Volts grade drawn through and including PVC conduit (ISI) marked (not less than 25mm dia) medium grade and conduit accessories fixed on surface/ concealed in walls, ceilings, roof etc., including provision of 1 run of 2.5 Sqmm ISI marked PVC insulated FRLS unsheathed multistranded copper conductor cable 1100 Volts grade as earth continuity conductor (green in colour) along with wiring and connected to common earth dolly including cutting/casing/making holes and making good the disturbed surfaces to match with existing surfaces including taking down old unserviceable wiring at any height complete all as specified and as directed. NOTE: 2 runs of 2.5 Sqmm, 1 run of 2.5 Sqmm as earth wire and 1.0 metre of PVC conduit is measured as one unit length.
M&L for submain wiring with 2 runs of 6.0 Sqmm ISI marked PVC insulated FRLS unsheathed multistranded copper conductor cable 1100 Volts grade drawn through and including PVC conduit (ISI) marked (not less than 25mm dia) medium grade and conduit accessories fixed on surface/ concealed in walls, ceilings, roof etc., including provision of 1 run of 6.0 Sqmm ISI marked PVC insulated FRLS unsheathed multistranded copper conductor cable 1100 Volts grade as earth continuity conductor (green in colour) along with wiring and connected to common earth dolly including cutting/casing/making holes and making good the disturbed surfaces to match with existing surfaces including taking down old unserviceable wiring at any height complete all as specified and as directed. NOTE: 2 runs of 6.0 Sqmm, 1 run of 6.0 Sqmm as earth wire and 1.0 metre of PVC conduit is measured as one unit length.
M&L for submain wiring with 4 runs of 10.0 Sqmm ISI marked PVC insulated FRLS unsheathed multistranded copper conductor cable 1100 Volts grade drawn through and including PVC conduit (ISI) marked (not less than 25mm dia) medium grade and conduit accessories fixed on surface/ concealed in walls, ceilings, roof etc., including provision of 1 run of 10.0 Sqmm ISI marked PVC insulated FRLS unsheathed multistranded copper conductor cable 1100 Volts grade as earth continuity conductor (green in colour) along with wiring and connected to common earth dolly including cutting/casing/making holes and making good the disturbed surfaces to match with existing surfaces including taking down old unserviceable wiring at any height complete all as specified and as directed. NOTE: 4 runs of 10.0 Sqmm, 1 run of 10.0 Sqmm as earth wire and 1.0 metre of PVC conduit is measured as one unit length.
M&L for sheet metal enclosure for pre-wired MCCB distribution board, double door, vertical, powder coated, TPN, 12 way, 415 volts, three phase with 250 Amps rated tinned electrolytic copper bus bar with neutral link complete all as specified and directed. NOTE: MCCBs and MCBs measured and paid separately under relevant items of this BOQ.
M&L for sheet metal enclosure for pre-wired MCCB distribution board, double door, vertical, powder coated, TPN, 4 way, 415 volts, three phase with 250 Amps rated tinned electrolytic copper bus bar with neutral link complete all as specified and directed. NOTE: MCCBs and MCBs measured and paid separately under relevant items of this BOQ.
M&L for sheet metal enclosure for pre-wired MCB distribution board, double door, vertical, powder coated, SPN, 12 way, 240 volts, single phase with 200 Amps rated tinned electrolytic copper bus bar with neutral link complete all as specified and directed. NOTE: MCBs measured and paid separately under relevant items of this BOQ.
M&L for sheet metal enclosure for pre-wired MCB distribution board, double door, vertical, powder coated, SPN, 8 way, 240 volts, single phase with 200 Amps rated tinned electrolytic copper bus bar with neutral link complete all as specified and directed. NOTE: MCBs measured and paid separately under relevant items of this BOQ.
M&L for sheet metal enclosure for pre-wired MCB distribution board, double door, vertical, powder coated, SPN, 4 way, 240 volts, single phase with 200 Amps rated tinned electrolytic copper bus bar with neutral link including taking down old unserviceable one complete all as specified and directed. NOTE: MCBs measured and paid separately under relevant items of this BOQ.
M&L for MCCB, TP, 415 Volts, 100 Amps, 16 KA rupturing capacity conforming to IEC -60947-II/ IS-13947-II complete all as specified and directed.
M&L for MCCB, TP, 415 Volts, 200 Amps, 36 KA rupturing capacity conforming to IEC -60947-II/ IS-13947-II complete all as specified and directed.
M&L for MCCB, TP, 415 Volts, 250 Amps, 36 KA rupturing capacity conforming to IEC -60947-II/ IS-13947-II complete all as specified and directed.
M&L for MCB, SPN, 240 Volts, 40 to 63 Amps, 10 KA rupturing capacity complete all as specified and directed.
M&L for MCB, TP, 415 Volts, 63 Amps, 10 KA rupturing capacity complete all as specified and directed.
M&L for MCB, SP, 240 Volts, 6 to 32 Amps, 10 KA rupturing capacity complete all as specified and directed.
M&L for ceiling rose, two to three terminals, surface bakelite type, AC, 50Hz, 240 Volts complete all as specified and directed.
M&L for recess mounting 2' x 2' (60 cm x 60 cm) 42W LED luminaire, pre-wired, suitable for Armstrong/Grid ceiling with high performance LEDs complete with all accessories and driver including taking down old unserviceable one complete all as specified and directed. MAKE: Philips Cat RC 380 B LED 42 S-6500 G6 L60 W60 PSU OD or Techno commercially equivalent in Wipro/Bajaj
M&L for wall mounting 2' (60 cm)10W LED batten fitting, pre-wired with polycarbonate diffuser & integrated electronic driver, THD < 10% with high performance LEDs and with all accessories including taking down old unserviceable one complete all as specified and directed. MAKE: Philips Cat BN 021 LED 12 S-6500 PSU GR or Techno Commercially equivalent in Wipro/Bajaj
M&L for wall mounting 4' (120 cm) 20W LED batten fitting, pre-wired with polycarbonate diffuser & integrated electronic driver, THD < 10% with high performance LEDs and with all accessories pre-wired including taking down old unserviceable one complete all as specified and directed. MAKE: Philips Cat BN021 LED 40 S-6500 PSU GR (4FT) or Techno commercially eqivalent in Wipro/Bajaj
M&L for recess mounted 20W LED down lighter suitable for Armstrong/Grid ceiling with pressure die-cast aluminium heat sink, PC diffuser in white powder coated finish with integrated driver and high performance LEDs complete with all accessories including taking down old unserviceable one complete all as specified and directed. MAKE: Philips Cat DN590 BM LED 20 S-6500 WHMV or Technco Commercially equivalent in Wipro/Bajaj
M&L for 1' x 1' (30 cm x 30 cm )15W LED recess mounted luminaire suitable for Armstrong/POP ceiling with CRCA powder coated housing with high transmittance polystyrene opal diffuser, IP20 IK03 and high efficiency long life LEDs as light source, powdered by electronic driver complete with all accessories including taking down old unserviceable one complete all as specified and directed. MAKE: Philips Cat SM 251 C LED 20 S-6500 PSU WH or Techno Commercially equivalent in Wipro/Bajaj
Taking down old wall mounting fan of any make upto 400mm sweep from its position, spray painting with synthetic enamel paint (first quality) of existing tint and marking MES No. with black paint and refixing back to its existing position including provision of new cable of suitable length for connecting fan with ceiling rose/socket complete all as specified and directed. MAKE OF PAINT: ASIAN PAINTS (APCOLITE)/ BERGER (LUXOL)/ NEROLAC(HI GLOSS)
Taking down old ceiling fan of any make/sweep from its position including down rod and canopies, spray painting with synthetic enamel paint (first quality) of existing tint and marking MES No. with black paint and refixing back to its existing position using new down rod of heavy quality of 1.2 metres length (approx), new canopies, new clamp with rubber bush, bolt & nut including provision of new flexible cable of suitable length for connecting fan with ceiling rose complete all as specified and directed. MAKE OF PAINT: ASIAN PAINTS (APCOLITE)/ BERGER (LUXOL)/ NEROLAC(HI GLOSS)
M&L for modular step type fan regulator, 120W, 2 module including taking down old unserviceable one complete all as specified and directed.
Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 m deep below level with the top edge of earth plate at a depth not less than 1.5 m below normal ground level, connected to GI earth wire 4mm dia by means of bolts, nuts, check nuts & washers of galvanised iron or steel, GI earth wire protected by 15mm bore GI pipe medium grade, watering pipe 20mm bore GI pipe light grade, GI wire meshed funnel, alternate layers of char coal and salt on all sides of the earth plate upto a thickness of 150mm, filling of black cotton soil in earth pit upto GL and connecting to earth plate including necessary excavation and work, PCC ( 1:3:6) type C-1 earth chamber, 50mm thick cover slab in RCC(1:2:4) type B1 with 8mm dia nominal reinforcement (TMT) @ 100mm c/c both ways etc., complete all as shown in Electrical Plate No. 3 of MES Schedule Part-I, connecting to earthing test point, including testing on completion, complete all as specified and driected. NOTE: Unit rate quoted shall be deemed to include for the cost of necessary excavation and earth work in any type of soil strata, RFR and removal of surplus spoil upto a distance of 50m, PCC earth chamber, funnel and RCC cover, GI earth wire beyond 7.5 m if required, shall be measured paid for separately under relevant items of BOQ.
Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation, for laying of pipes/cables/poles etc., forming bottom surfaces to required slope/gradient where pipes are laid and getting out in any type of soil complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers each not exceeding 25 cms as in soil complete all as specified and as directed.
Removal of excavated soil to a distance not exceeding 50 mtrs and deposited where directed at a level not exceeding 1.5mtrs above the starting point complete all as specified and as directed.
Supply and spreading natural river sand of approved quality for cushioning of cable laid in trenches including compacting and leveling complete all as specified and as directed. NOTE: Only punned thickness will be measured for the purpose of payment.
M&L for un reinforced precast concrete cable cover, Class LV, Type-I, flat, size 250mm x 150mm x 40mm as in cable protection, laid adjacent to each other with width laid along the length of cable in trenches complete all as specified and as directed.
M&L for cutting of existing bituminous/PCC road or flooring/plinth protection/hardstanding, for laying of GI pipe in road intersection for passing of LT XLPE cable including excavation in any type of soil, returning, filling in and ramming excavated soil upto 30cm depth of trench, providing PCC (1:2:4) type B1 (using 20mm graded stone aggregate) for top 30 cm depth of trench to flush with existing road surface complete all as specified and directed.
M&L for 50mm dia GI pipe, light grade, fixed to walls/poles or laid in trenches, road crossing etc., for protection of underground cable/earth strip including sealing ends with hessian cloth impregnated with bituminous compound in ground and with teak wood bushes for ends fixed on walls/poles complete all as specified and directed.
Supplying, laying, jointing, testing and commissioning 3.5 core 150 Sqmm, 1100 volts grade, LT XLPE insulated, PVC sheathed as per IS-7098 (Part-I), 1988 galvanized steel strip or wire armoured, heavy duty, electric cables, with multistranded aluminium conductor laid in trenches/ passing through pipe/duct/ road crossing or fixed on poles, walls with suitable size of clamps made out of mild steel flat iron including jointing material such as crimping type lugs, brass cable glands, heavy duty double compression type etc., including disconnecting and taking down old unserviceable cable complete all as specified and directed. NOTE: Earthwork Excavation, sand cushioning, GI pipe and cable protection covers will be measured and paid separately under relevant items of this BOQ.
Supplying, laying, jointing, testing and commissioning 3.5 core 95 Sqmm, 1100 volts grade, LT XLPE insulated, PVC sheathed as per IS-7098 (Part-I), 1988 galvanized steel strip or wire armoured, heavy duty, electric cables, with multistranded aluminium conductor laid in trenches/ passing through pipe/duct/ road crossing or fixed on poles, walls with suitable size of clamps made out of mild steel flat iron including jointing material such as crimping type lugs, brass cable glands, heavy duty double compression type etc., including disconnecting and taking down old unserviceable cable complete all as specified and directed. NOTE: Earthwork Excavation, sand cushioning, GI pipe and cable protection covers will be measured and paid separately under relevant items of this BOQ.
Supplying, laying, jointing, testing and commissioning 4 core 16 Sqmm, 1100 volts grade, LT XLPE insulated, PVC sheathed as per IS-7098 (Part-I), 1988 galvanized steel strip or wire armoured, heavy duty, electric cables, with multistranded aluminium conductor laid in trenches/ passing through pipe/duct/ road crossing or fixed on poles, walls with suitable size of clamps made out of mild steel flat iron including jointing material such as crimping type lugs, brass cable glands, heavy duty double compression type etc., including disconnecting and taking down old unserviceable cable complete all as specified and directed. NOTE: Earthwork Excavation, sand cushioning, GI pipe and cable protection covers will be measured and paid separately under relevant items of this BOQ.
M&L for LED post top fixture not less than 25W high efficiency, single piece aluminium pressure die-cast housing & polycarbonate diffuser with luminaire system efficiency not less than 75 lumens/W and system lumens output>2600 lumens, CRI>70, surge protection upto 10 KV, TDH<10% at full load and high efficiency long life LEDs as light source, powered by electronic driver complete with all accessories including taking down old unserviceable one complete all as specified and directed. MAKE: PHILIPS cat part No. BGP 300 LED 28 757 PSU PC IN S1 (or) HAVELLS cat part No. CORALPT 35W LED 757 PSYM TOPC or techno commercially equivalent of WIPRO
M&L for LED flood light fixture, aluminium pressure die-cast housing (LM24) alongwith mounting bracket for aiming, system lumens output>8000 lumens, & polycarbonate diffuser with luminaire system efficiency not less than 115 lumens/W and CRI>70, surge protection upto 10 KV, TDH<10% at full load and high efficiency long life LEDs as light source, powered by electronic driver complete with all accessories including taking down old unserviceable one complete all as specified and directed. MAKE: Philips Cat VBP 181 LED 62 CW FG WB 70W 120-270 PSU or Techno commercially eqivalent in Wipro/Bajaj
M&L for street light control junction box 150mm x 210mm x 92mm made out of FRP sheet moulded and arrangement for incoming and outgoing 3 phase, 4 wire system with RYB & N studs and control for incoming and outgoing cables with MCB SP 10 Amps 230 volts with neutral link including 25x3mm FI 'D' clamps-2 Nos suitable to pole of any size fixed with bolts, nuts and washers etc., including taking down old unserviceable one complete all as specified and directed. MAKE: HENSEL cat part No. kf 1600 B or techno commercially equivalent of SINTEX
Supplying & laying or fixing or passing through pipe weather proof twin core 4 Sqmm, 1100 volts grade, heavy duty, electric cable with multistranded aluminium conductor, PVC insulated served with an inner sheathing of PVC tape and over all PVC sheathed armoured with galvanized steel strip or wire as in service connections including disconnecting and taking down old unserviceable cable complete all as specified and directed.
FIXING ONLY water cooler having storage capacity of 40 litres and cooling capacity of 40 litres, electric driven, single phase and 2 KVA voltage stabiliser, M&L for electrical connection viz., point wiring with 2.5 Sqmm and earth wire for 16 A multi purpose modular switch socket outlet and water supply connections viz., inlet, outlet and drain with suitable dia of CPVC pipe and fittings as necessary at site and testing complete all as specified and directed. NOTE: Water cooler (1 No.) and 2 KVA voltage stabiliser (1 No.) will be issued at AGE E/M store yard of GE (I) R&D, RCI, Hyderabad and the unit rate quoted is deemed to include for loading/unloading and transportation from store yard to site. Any damage caused to the equipment while transporting and fixing shall be the sole responsibility of the contractor.
M/s ANUSHA ENTERPRISES
Indu Electricals
SHAH ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .