Karnataka

Active

Works

Water supply/sewage lines

Providing FHTCs to 77 Households in Otoli habitation of Otoli village, Khanapur Taluka in Belagavi District through SVS to Otoli village in Belagavi District (55 LPCD)BALANCE WORK

Rural Drinking Water and Sanitation Department

RWSSD Division Office Belagavi | Belagavi, Karnataka

Amount: ₹9.2 LCloses: 9 Jul 2026Due tomorrow

Tender Value

₹9.2 L

EMD Value

₹23,000

Closing Date

9 Jul 2026, 10:30 pmDue tomorrow

Tender Inviting Organisation

Name

Rural Drinking Water and Sanitation Department

Work Description

Providing FHTCs to 77 Households in Otoli habitation of Otoli village, Khanapur Taluka in Belagavi District through SVS to Otoli village in Belagavi District (55 LPCD)BALANCE WORK

Tender Information

Tender ID

RWSSD/2026-27/WS/WORK_INDENT10153

Reference Number

RWSSD/2026-27/WS/WORK_INDENT10153

Tender Type

Open

Product Category

Water supply/sewage lines

Location

RWSSD Division Office Belagavi

Source Website

Subscribe to view

Documents Required

10 documents required · 10 mandatory

Technical Bid

RequiredPWD Department The Tenderer should possess valid registration Certificate as mentioned in KW docu

RequiredPAN CARD COPY

RequiredGST REGISTRATION COPY

RequiredWork done certificate details as mentioned in KW docu certified by an officer not below the rank of Executive Engineer

RequiredUnconditional line of credit from Banker of a nationalized Bank Scheduled Bank liquid assets as mentioned in KW docu

RequiredAnnual Turnover Certificate with UDIN NO

Requiredongoing work The Tenderer must submit ongoing work commitments certified by an officer not below the rank of Executive Engineer to compute available tender capacity

Requiredtender capacity Tenderer must have assessed available tender capacity as per formula in KW documents

RequiredAccurate Postal address and Phone /Mobile Number

RequiredThe Contract of party shall visit the balance work site along with the Aee Khanapur and Submit the Joint Inspection report along with other required documents for the agreement

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

Corrigendums modifications correction if any will be published in the website only.

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Acceptence / Cancellation of the works are reserved by under signed without any reasons for the same..

All the scanned documents pertaining to bidder to be uploaded shall be in original and same originals should be produced to the Executive Engineer (at the time of Technical Bid Opening) who reserves right to verify the orginal documents before approval.

To qualify for award of this contract, each tenderer should give all details and documents as per Technical and Financial bid attached to this tender.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

All the materials to be utilized for the work must be tested in authorised labs and quality control test reports must be enclosed to the bills. All types of pipes and pumping machineries with Accessories and other materials must be tested by third party agencys. Cost of all QU tests must born by contractor

If any date in the tender time table is government holiday, next working date will be considered

Incomplete / conditional tenders will not be accepted.

Tenderer must submit his present accurate postal address and phone / cell phone number

The tender may be cancelled at any stage without assigning any reason

The rates of items are inclusive of cost of materials, labour charges, HOM of machinery, all lead and lifts and all other charges to complete the work successfully as per specifications and as directed by engineer in charge of work

The tenderers must submit the scanned documents in pdf / jpeg form, not in other form.

Any objection regarding the tender must be submitted directly to Executive Engineer , not in inward.

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer, RDW&S, Belgaum is final. and Binding

Bidder should Submit only unconditional Line of Credit in the prescribed format only from the Bank

Third party consults may be engaged for checking quality and quantity of work and to prevent any misuse. proper reporting methods trough these agencies and their comments to be reviewed addressed immediately at district level. quality of work is of most importance.

As per Karnatka State Government order LD/300/LET/2006 Blore dated 01.01.07 and Government letter No.PW/134/BMS/2007 dated 27.07.07, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare Fund. & Royalty on construction materials and other taxes will be deducted as per prevailing Govt Orders

Materials like pipe, CI pipe, cement aggregate sand etc., required for the work shall be procured by the tenderer themselves and shall be of standered quality as per IS specifications and should get tested by the quality control authority before used to the work at his own cost.

The work should be carried out in accordance with the standard specifications specified by the department.

The work should be executed strictly as per the tender specification mentioned. Contractor should arrange for quality check at different stage of work for quality assurance as per direction of Engineer-in-charge during the work in progress and after completion. If any failures found the cost will be recovered from the contractor and will be recommended for black listing immediately.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent

Royalty on construction materials and other taxes will be deducted as per prevailing Govt Orders.

Tenderers must have valid PWD registration and must submit PWD registration copy Class III & above

Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.9.15 Lakhs(The Consolidated Annual Financial turnover certificate for the relevant financial years certified by an ICAI registered Chartered Accountant along with UDIN number (also the audited financial statements for each of the financial years to be submitted). The certificate should be affixed with the seal of the office of the Chartered Accountant with the registration number and duly notarized by Notary Public.).

Satisfactorily completed(at least 90% of the contract value)as Prime Contractor ,atleast one similar nature work(Drinking Water Supply Work)ofvalue not less than Rs.4.58 Lakhs certified by an officer not below the rank of Executive Engineer

The Tenderer should submit the Unconditional line of credit from Banker of a nationalized Bank / Scheduled Bank / liquid assets i.e. of Rs.2.75Lakhs

The Contract of party shall visit the Balance work site along with the AEE Khanapur and Submit the Joint Inspection Report

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹23,000

Important Dates

Last Activity

30 Jun 2026

Published

30 Jun 2026

Download Ends

9 Jul 2026

BOQ Preview

•

RCC Hume pipes Circular pump House Manufacturing and Supplying precast RCC Circular Hume pipe pump House with M.S Door and RCC Conical roof as per specification and drawings - Internal dia Mtr. 1200mm...

•

Earth work excavation by manuval means for drains ,canals,waste weier ,draft,approach channels, key trenches, foundation of Buildings & bridges and such

•

simillar works in all kinds of soils, as per dr...

•

Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregates @ 0.465cum, ...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement motar 1:6(1 cement:6 :coarse sand) complete with all lead, lifts, loading & unloading charges including cost and conveya...

•

Providing and constructing granite / trap / basalt size stone masonry in basement with cement mortar 1:6, edges of stones chistle dressed in courses not less than 15 cms high, bond stones at 2m. apart...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing flush pointing to square rubble, course or uncoursed stone masonry with cement mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost of materials, labour,...

•

Providing and applying painting in 2 coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after throughly brushing the surface, free from mortar drops and...

•

Erection and positioning of RCC hume pipe pump house/cistern on size stone masonry platform ,including transportation charge and handling, finishing with all necessary tools, plants and materials etc....

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5 Sgmm (Phase and Neutral) and 1x1.0 sqmm (Earth wire) wire) FRLS multi strand PVC insulated copper wire (co...

•

Supplying 6A flush type socket and 6 amps flush type SP switch either surface/tlush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring us...

•

Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete. -do- 8"x6"x3" (2...

•

Supplying heayy gauge PVC conduit pipe 19/20mm dia 2mm thick confirnming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc, and running before concreting the slab. The ...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...

•

Supplying and fixing regular MCB distribution boards on wall / wood board/ flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C Type curve, indicator ON/OFF, enerBy cross-3 with Short circuit breaking cap...

•

Suppiying and fixing of 15 S FIuorescent Tube with 14W power consumption with low 3mg Mercury content and below 40% glass content than T8 lamp and 206 less phosphor coating than T8 with initial lumen'...

•

Fixing all types and all capacities of fluorescent/ fase ceiling/spot light/ CFL CFL/ LED fittings indoor on the wall / ceiling/tafters / 8irders using 23/0.0076" twin twisted PVC insulated wires, req...

•

Supplying, fixing, wiring, earth electrode for grounding conduits cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit.. The pit should be ...

•

Pumping machinery with accessories 7.5hp

•

Providing, Supplying and fixing LT cast iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, ...

•

Laying of rising main

•

Cutting Asphalt /Concrete road surface using machine cutter for leakage pit with earth work excavation in all classifications of soil including all lead and lifts bailing out water with pumps includin...

•

Earthwork excavation for pipeline trenches including depositing on bank upto a lead of 50 mtrs and depth up to 2.00 mtrs. Including shoring and strutting, danger lighting and using sight rails and bon...

•

Earth work excavatoin for water Supply & Sanitary lines, Electrical conduits either in pits or pipe line trenches (upto 600mm Trench width) as per drawing and technical specification, including settin...

•

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...

•

Providing and fixing kinetic AIR VALVE of PN 16.0 for automatic discharge of accumulate air during working condition, conforming to IS 14845/ EN 1074-4. Body and bonnet of DI conforming to IS-1865 of ...

•

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

•

Refilling available earth around trenches/pipelines,

•

cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 ...

•

Providing and laying Reinforced Cement Concrete pipe light duty NP2 for culverts, roadway utilities& crossingsas per IS 458:2003 in Single row including pointing ends and fixing collars with cement m...

•

Providing and constructing un-reinforced plain cement

•

concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such

•

simillar works in all kinds of soils, as per dr...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

laying of distribution network

•

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

•

Providing and laying Reinforced Cement Concrete pipe light dutyNP2 for culverts, roadway utilities& crossingsas per IS 458:2003in Single row including pointing ends and fixing collars with cement mort...

•

Refilling available earth around trenches/pipelines,

•

cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after

•

watering with a lead upto 50 m , and lift upto 1.5

•

Providing and constructing un-reinforced plain cement

•

concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...

•

Providing Functional house tap connections

•

Providing & fixing electro fusion saddle comply with BS EN12201-3:2011, PN-12.5 rating and food grade raw material as per BS 6920 with material of construction PE 80 or PE 100 and colour of fitting - ...

•

Flow control Valve 5LPM/10LPM/15LPM : Providing, & fixing Flow control valve using food grade materials SS 316 ball /1/2" [15mm] including cost of all materials, labour charges, HOM and testing comple...

•

KSRB13-8 : Providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgs/sq.cm working pressure of outside diameter with special flange, compression type fittings,...

•

Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Female Threaded Elbow 16X1/2m complete with all lead, lifts, loading & unloading charges including cost...

•

Providing and fixing of HDPE water meter box with locking arrangement to protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200...

•

Supply and delivery at site wrought middle steel (galvanized) GI union confirming to IS 1239-II, 1991 with latest amendments if any. complete with all lead, lifts, loading & unloading charges includin...

•

Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for complete with all lead, lifts, loading & unloading charges inclu...

•

Providing and fixing brass bib cock of approved quality : including cost of all materials, labour and HOM with all leads complete as per specifications.15 mm brass bib cock complete with all lead, ...

•

Refilling available earth around trenches/pipelines,

•

cables in layers not exceeding 20 cm in depth,

•

compacting each deposited layer by ramming after

•

watering with a lead upto 50 m , and lift upto 1.5

•

Providing and Filling in foundation with granite / trap broken metal 100mm. And down size & with approved sand including hand packing, ramming, watering,

•

including cost of all materials and labour wit...

•

Providing and constructing un-reinforced plain cement

•

concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

•

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Otolli 10153 KW1 GEN.docx

Tender Document • 0.21 MB

Noti3.pdf

Others - notification • 1.69 MB

Ready to Participate?

Download all tender documents and submit your bid