Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.3 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹49.9 L+₹45,364 (0.92%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest Bidder | |
| 3 | L3₹50.3 L+₹81,195 (1.64%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest Bidder | |
| 4 | L4₹53.7 L+₹4.3 L (8.64%)Rejected-AOC | L4 | Rejected-AOC Other than Lowest Bidder |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
4 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (South) Jaipur
Garrison Engineer (South) Jaipur Military Engineer Services Kalyan Marg, Jaipur302006
SPL REPAIR TO 11 NOS MD ACCN IN KV 4 AT JAIPUR MIL STN UNDER GE (S) JAIPUR
2022_MES_524744_2
GE (S)/J-09P /2022-23 8723/E8
Open Tender
Civil Works
Item Rate
180 days
Jaipur
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Yes
₹94,000
Yes
10 Aug 2022
16 Jul 2022
6 Aug 2022
16 Jul 2022
4 Aug 2022
22 Jul 2022
Amount
Taking down cement plaster including raking out joints, hacking for key scrubbing down with water etc built in CM complete all as specified and as directed by Engr-in-Charge.
M&L rendering 15 mm thick in CM(1:4) on brick walls or concrete surface, surface finished even and fair, by using WPC @ 3% by weight of cement complete all as specified and as directed by Engr-in-Charge. Note: WPC shall be paid as supply only at Srl item No. 86 of BOQ
M&L for rendering 15mm thick in cement mortar 1:6 on surface other than fair face of brick work of walls, finished fair & even complete all as specified and as directed by Engr-in-Charge.
M&L for rendering 10mm thick in cement mortar 1:4 on concrete surfaces including finished even & smooth without using extra cement on ceiling complete all as specified and as directed by Engr-in-Charge.
M&L applying Two coats of 100% Premium acrylic emulsion paint newly plastered surfaces of wall, having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance interior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of interior primer applied @ 0.90 litre/10 sqm over new surfaces over 1mm thick wall care putty on ceiling complete all as specified and as directed by Engr-in-Charge.
M&L for preperation of new plastered or unplastered surfaces of ceiling and applying Two coats of Oil Bound Distemper over a coat of 1mm thick wall care putty complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of new plastered surfaces and applying two coats of Weather base paint of approved shade over a coat of 1mm thick birla wall care putty on walls complete all as specified and as directed by Engr-in-Charge.
Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-Charge.
S&F Coloured Glazed ceramic tiles size 300x450mm x 7mm thick edge cut/ joint free , on walls etc set & jointed in neat cement slurry & pointed in white/coloured cement to match over 15mm thick plaster in cement mortar (1:6), complete all as specified and as directed by Engr-in-Charge.
S&F Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick cement rendering in CM (1:4) finished fair and even, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs CP Bib taps fancy type 15 mm dia bore fixed to iron ferrule pipe, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs PVC connection 15mm bore with 2 Nos PTMT nuts, 45cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs CP fancy Type Pillar taps 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs 15 mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs Towel rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms), complete all as specified and as directed by Engr-in-Charge.
S&F in repairs brass chromium plated shower rose 125mm size with swivel joint type including fixing to steel pipe of 15mm bore or union, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs Chromium plated angle stop cock with wall flange fancy type cast copper alloy 15 mm bore any colour, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs Chromium plated stop cock with wall flange fancy type cast copper alloy 20 mm bore (Conceled type) any colour, complete all as specified and as directed by Engr-in-Charge.
Dismantling of old existing unserviceable WHB glazed and S&F vitreous china wash hand basin white of size 550x400mm flat back excluding taps, waste, chain and plug but including brackets including cutting for and pinning in ends of brackets or erecting stand, complete all as specified and as directed by Engr-in-Charge.
Demolition of old existing unserviceable EWC seat and S&F vitreous china wash down water closet pan ( Pedestal pattern ),white including connection to drain (or outgoing pipe) and to flushing pipe,anti-sypohonage pipe etc. & with plastic WC seat cover white in colour closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engr-in-Charge.
S&F in repair PVC valve less syphonic action type low level flushing cistern coloured with inlet ball valve float and handle incl bracket 10 Lit capacity, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and as directed by Engr-in-Charge.
S&F in repair Stop valves 20 mm bore, . copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs CP pressure JET for EWC including flexible pipe for 15 mmdia bore, complete all as specified and as directed by Engr-in-Charge.
Dismantling of old U/S gratingand M&L of PVC Nahani / floor trap and square in size of 100X100 mm including MS chromium plated grating 125mm dia of weight not less than 50gm for floor trap / Nahani trap, complete all as specified and as directed by Engr-in-Charge.
Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including cutting chasis of wall for imbending the GI pipe in walls, complete all as specified and as directed by Engr-in-Charge. of following sizes :-
15 mm bore
20 mm bore
S&F in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 1000 Ltrs Capacity, complete all as specified and as directed by Engr-in-Charge.
S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule, complete all as specified and as directed by Engr-in-Charge.
M&L for providing circular, raised platform of height 20 cm below the tank and base 15cm more than the external dia of thank of PVC cylindrical water tank of capacity 1000 liters using PCC 1:3:6 type c1 using 20mm graded stone aggregate with smooth finish, complete all as specified and as directed by Engr-in-Charge.
S&F 3 mm thick sheet glass in squares not exc 0.50 sqm in each pane fixed with wooden beads or putty or clips etc/ in metal frame, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs vitreous china water closet Indian type 580 mm X 440 mm long pan white with 'P' or 'S' trap front or back inlet footrest including provn of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs soap dish, vitreous china, white, approximate size 160x160x90mm fixed to plugs with chromium plated (CP) brass screws, complete all as specified and as directed by Engr-in-Charge.
S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors including dismantling of old pipe, complete all as specified and as directed by Engr-in-Charge.
S&F cast iron soil, waste and vent pipe spun centrifugally cast iron of 75mm bore as per IS :3989, ISI marked, in any length, without ears, with cement joints, fixed to walls, including dismantling of old pipe, complete all as specified and as directed by Engr-in-Charge.
S&F cast iron soil, waste and vent pipe spun centrifugally cast iron of 100mm bore as per IS :3989, ISI marked, in any length, without ears, with cement joints, fixed to walls, including dismantling of old pipe, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs PVC (SWR) bends any radius 75mm dia, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs cast iron bend (any radius) of 75mm bore, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs cast iron bend (any radius) of 100mm bore, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs 100mm dia cast iron cowls, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs 75mm dia cast iron branch piece, double (equal or unequal), ordinary or inverted (spigot or socket type) with oval access door, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs 100mm dia cast iron branch piece, double (equal or unequal), ordinary or inverted (spigot or socket type) with oval access door, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs toilet paper holder, vitreous china, box type, coloured, fixed to walls with chromium plated (CP) brass screws, complete all as specified and as directed by Engr-in-Charge.
S&F S&F in repairs bathroom Glass corner of best quality (as per sample), complete all as specified and as directed by Engr-in-Charge.
M&L in repairs Fancy type MS bracket suitable for curtain rod, complete all as specified and as directed by Engr-in-Charge.
M&L in repairs 20 mm dia Drapery Fancy type CP made up on MS tube of thickness 1 mm curtain rod, complete all as specified and as directed by Engr-in-Charge.
M&L in repairs Fancy type Finial CP made of MS suitable for above curtain rod, complete all as specified and as directed by Engr-in-Charge.
S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and as directed by Engr-in-Charge.
S&F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed by Engr-in-Charge.
S&F Size of frame 125x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed by Engr-in-Charge.
S&F Size of frame 105x60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed by Engr-in-Charge.
S&F MS holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Fe-290 Gde E-165 including necessary welding etc. and fixed in position, complete all as specified and as directed by Engr-in-Charge.
Cutting holes in stone / brick walls built in CM for inserting hold fast & making good dismantled portion in CM (1:3) depth of embaded portion of holdfast n. exc half brick, complete all as specified and as directed by Engr-in-Charge.
S&F 30 mm thick Fiber glass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and complete all as specified and as directed by Engr-in-Charge.
S&F 35mm thick 2nd class hard wood factory made Glazed and skelton shutters open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain chamfered / rounded fitted with cut & mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I, section 8, Section 8, Clause 8.24 (a), supplied and fitted to chowkhats, complete all as specified and as directed by Engr-in-Charge.
S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete all as specified and as directed by Engr-in-Charge.
S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section, complete all as specified and as directed by Engr-in-Charge.
S&F Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) & fixing clips of sheet, . or extruded sections & fixing bolts & sliding bolts of extruded sections or . aluminium alloy, complete all as specified and as directed by Engr-in-Charge.
S&F Aluminium handles 125 mm size, cast type, anodised, complete all as specified and as directed by Engr-in-Charge.
S&F aluminium anodised floor door stopper overall length 140 mm double legged with rubber shoe, fixed to bottom rail of door, complete all as specified and as directed by Engr-in-Charge.
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed by Engr-in-Charge.
S&Fin repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed by Engr-in-Charge.
M & L preperation of new wood surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed by Engr-in-Charge.
M & L preperation of new Steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide, zinc chrome primer complete all as specified and as directed by Engr-in-Charge.
Water Proof Treatment to RCC Roof comprises the following, complete all as specified and as directed by Engr-in-Charge:- (a) Complete removal of existing roof treatement and disposed off the rubbish outside the defence land (b) All visible cracks to be opened up in V shape cleaned properly with wire brush washed and filled with cracks filling compound using cracks upto 15mm width of cracks (c) cracks of 15mm width are filled with URP cement grouting by injecting nozzles by authorised applicator of manufacturer carefully by following manufacturer's instructions (b) after drying one coat of roof coat paint shall be applied with roller in both directions with a gap of 12 hrs @ 1 Ltr per Sqm (each direction) of roof coat over a roof priming coat of 0.5 Ltr of water mixed to 1 ltr of roof coat (e) necessary gurantee for 5 years shall be submitted by the contractor Make: Sika/ Asian Paints/ IWL/ Berger Paints
M&L for preparing of old painted surfaces of wood or wood based materials of any description over 10 cm width or girth and applying one coat of synthetic enamel paint on wooden surfaces complete all as specified and as directed by Engr-in-Charge.
M&L for preparing of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint on steel surfaces complete all as specified and as directed by Engr-in-Charge.
M&L Granite 16 to 18 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed by Engr-in-Charge.
M&L for screed bed or bedding layer of CM (1:4), 10mm thick for laying floor finishes, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed by Engr-in-Charge.
S&F Plat rack of size 24" x 36" x 10" complete all as specified and as directed by Engr-in-Charge. Make Prayag P-336 or equivalent
Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames), complete all as specified and as directed by Engr-in-Charge.
All as per item No 74 above but area n exc 1.50 Sqm each
Taking down shutters of any description exc 1.00 sqm but n exc 2.50 sqm each
M&L in repairs 19 mm thick WPC Membrane board for kitchen cabinate shutter Almirah/ Cup board in wood grain colour, half round edge, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs Auto close hinges,stainless steel, bright finish or electrogalvanised, complete all as specified and as directed by Engr-in-Charge.
M&L in repairs 19mm thick WPC board in cabinate almirah cup board and partiation of cabinate, complete all as specified and as directed by Engr-in-Charge.
M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290, Gde-E-165, complete all as specified and as directed by Engr-in-Charge.
S&F TMT MS bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia complete all as specified and as directed by Engr-in-Charge.
Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by Engr-in-Charge.
M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar (1:4), complete all as specified and as directed by Engr-in-Charge.
M & L Chequered cement concrete tiles 20cmx20cmx25mm thick with grey cement and pigment, set,jointed and pointed in neat cement slurry in floors set over 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed by Engr-in-Charge.
Area not exceeding 1.00 sqm each
Area exceeding 1.00 sqm but not exceeding 2.00 sqm each
Supply only Integral water proofing compound complete all as specified and as directed by Engr-in-Charge.
Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, chajjas, fascias, fins and similar works.
M&L for reinforced cement concrete (nominal mix) 1:2 :4 type B1 using 20mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, shelves and the like. Note :- Reinforcement & formwork shall be measured and paid for separately.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete, complete all as specified and as directed by Engr-in-Charge.
M&L for 50 mm thick cement concrete 1:3:6 type C2 as in plinth protection complete all as specified and as directed by Engr-in-Charge.
Taking down shutters of any description N exc 1.00 sqm each, complete all as specified and as directed by Engr-in-Charge.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar, complete all as specified and as directed by Engr-in-Charge.
M&L for complete removal of existing treatement of wall and applying two coats of oil bound distemper of approved tint over a coat of 1mm thick wall care putty, complete all as specified and as directed by Engr-in-Charge.
M&L for complete removal of existing treatement of ceiling and applying Two coats of Oil Bound Distemper over a coat of 1mm thick Birla wall care putty complete all as specified and as directed by Engr-in-Charge.
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and as directed by Engr-in-Charge.
M & L 75mm thick cement concrete (1:4:8) type D2 using 40mm graded stone aggregates as in sub-base to floor, approns etc, complete all as specified and as directed by Engr-in-Charge.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and as directed by Engr-in-Charge.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and as directed by Engr-in-Charge.
S&F Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM (1:6), complete all as specified and as directed by Engr-in-Charge.
M & L complete removal of existing treatement and applying Two coats of 100% Premium acrylic emulsion paint old plastered surfaces of wall, having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance interior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of interior primer applied @ 0.90 litre/10 sqm over 1mm thick wall care putty on ceiling complete all as specified and as directed by Engr-in-Charge.
M&L for complete removal of existing treatement and applying two coat of oil bound distemper over a coat of 1mm thick wall care putty on ceiling complete all as specified and as directed by Engr-in-Charge.
E/M Portion Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell/buzzer,bracket light fittings etc(excluding fans and fan regulators) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed by directed Engr-In-Charge to match with existing surface.
M&L for point wiring using approved colour coding as per IS, with 1.5 Sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLS cable of 1100 V grade (ISI marked) in and including concealed PVC conduit with accessories fixed on surface/ceiling by means of PVC sleeve/dash fasteners with cadmium plated screw and teakwood blocks closed recessed for mounting switch ,sockets, regulators etc. including, Mild steel Sunken box, earth dolly with zinc coated and 3 mm thick phenolic laminated sheet top cover including 1.5 sqmm single core PVC insulated and sheathed copper conductor FRLS cable 1100 V grade (ISI marked) earth continuty conductor to common earth and connected as continuous earth wire to earth dolly complete all as specified and as directed by Engr-in-Charge for followings:- (Note: Cost of hole cutting in wall for bell point, bulk head, building security light and any other site requirement during work execution shall be inclusive in above quoted price. Wiring on stone wall is included in above quoted price.)
One light/fan/ bell point controlled by one switch
One 3 pin 5 Amp socket outlet on the same board with other switches
One 3 pin 5 Amp socket outlet on independent board with other switches
One light point controlled by two, two way switches
All as per item No 103 above but Point wiring with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm copper cable continuous earth wire and connecting to common earth dolly complete all as specified and as directed by Engr-in-Charge.
All as per item No 103 above but Point wiring with 4 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 4 Sqmm copper cable continuous earth wire and connecting to common earth dolly complete all as specified and as directed by Engr-in-Charge.
S&F in repairs of switch, piano type flush/ Bell push button type 230/250 volts ISI marked complete all as specified and as directed by Engr-in-Charge of following:-
Switch piano, flush type, Single pole , one way 5 Amp
All as above but 15 Amp
Two Pole, two way 6 amp rating
Bell Push, flush type 5 Amp
S & F Socket Outlet 2 in 1 Piano type 230/250 Volts, 2 in 1,3 pin 5 Amp, complete all as specified and as directed by Engr-in-Charge.
S & F Socket Outlet type 230/250 Volts, 2 in 1,3 pin, 5 & 15 Amp, flush type, complete all as specified and as directed by Engr-in-Charge.
S & F in repair stepped type electronics fan regulator flush type AC 230 volts single pole (ISI marked) for AC 230V, 50 Hz on laminated sheet complete all as specified and as directed by Engr-in-Charge.
S&F in repair Ceiling rose surface bakelite, 3 Phase/ PVC/ Polycarbonate isolated body (ISI marked) complete all as specified and as directed by Engr-in-Charge.
S & F in repair lamp holder angle type PVC/Polycarbonate type with cord grip cap insulated body with back plate for pendant fitting including 10 Watt LED Lamp complete all as specified and as directed by Engr-in-Charge.
S & F in repair electric bell multi music type AC 230 volts single pole (ISI marked) for AC 230V, 50 Hz complete all as specified and as directed by Engr-in-Charge.
Supply & Fix surface mounted LED downlight in power coated white finish with integrated electric driver, LED fittings 1X 20 Watt complete with all accessories pre wired twin core twisted copper wire with suitable size complete all as specified and as directed by Engr-in-Charge. Make: Crompton Cat Part No. LCRP-20 NW or Equivalent
Supply & fixing in repairs Energy saving environmental friendly, Trim Line LED Batten Tube Light fittings 18/20/22 Watt ,1200mm(4 feet) TL, long life, impact proof,surface/wall mounting IP20,100 Lm per Watt, extruded Thermoplastic body with PC diffuser greater than 120 degree wide distribution available in 6500K CCT with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size complete including dismantling of old existing unserviceable fluorescent/LED TL complete all as specified and as directed by Engr-in-Charge. Make - Crompton cat Part No. LDL-20-CDL or equivalent
Supply & fixing in repairs Energy saving environmental friendly, LED Batten Tube Light fittings 10/12 Watt ,600mm(2 feet) TL, long life, impact proof,surface/wall mounting IP20,100 luminaire per Watt, extruded Thermoplastic body with PC diffuser greater than 120 degree wide distribution available in 6500K CCT with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size complete including dismantling of old existing unserviceable fluorescent/LED TL complete all as specified and as directed by Engr-in-Charge. Make - Crompton cat Part No. LDL-10-CDL or equivalent
Supply and Fix asthetically designed wall mounted synthetic non rechargeable comet wall mounted light (white) with B-22 base type lamp holder complete including 10 Watt LED Lamp and with all accessories pre wired twin core twisted copper flexible copper conductor cable with suitable size complete all as specified and as directed by Engr-in-Charge.. Make: Philips cat part No. 30575 or Equivalent
Supply and Fix 10 Watt LED IP-65 Bulkhead environfriendly ultra modern energy saving surface mounted decorative hexagon bulkhead back lit LED luminaire comprising of high brightness LEDs wall mounted complete with all accessories pre wired twin core flexible copper conductor of suitable size complete all as specified and as directed by Engr-in-Charge. Make: Crompton cat PartNo. LBHP-10-CDL or Equivalent
S&F in repairs Energy efficient LED security lights of 40 Wattage of IP 66 with PDC Aluminium body and clear glass, LED lens for wide beam distribution with efficacy greater than 100 Lm/watt , 5700K CCT, pf more than .90, complete all as specified and as directed by Engr-in-Charge.. (Note:- Bracket along with screw to fix on wall/surface duly painted by silver colour paint will be included in above quoted rate.) Make - Crompton Cat Part No. LSTS-40-CDL M or Equivalent
Supply, laying & testing cable XLPE insulated, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade, of X-Section area 4 core 25 sq mm. Complete, including taking out old U/s cable from Over head all as specified and as directed by Engr-in-Charge.
Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5metre in depth for wall foundation etc or for manhole/ cable laying/poles/struts not exceeding 10 sqm on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil, complete all as specified and as directed by Engr-in-Charge.
Returning filling in including spreading leveling watering and well ramming in layers each not exceeding 25cm thick in loose/soft soil, complete all as specified and as directed by Engr-in-Charge.
Removing excavated surplus soil to a distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5metre from starting point.
M&L dry tibba sand for cushioning to PVC under ground cable with screened and washed sand punning to provide a required cover complete all as specified and as directed by Engr-in-Charge. Note :- For the purpose of payment only punned thickness shall be measured
M&L for brick for protection of PVC under ground cable with common burnt clay building bricks sub class B with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent bricks not exceeding 10mm complete all as specified and as directed by Engr-in-Charge.
S&F steel tubing galvanised light grade of 40 mm bore dia for passing cable under road floors for mechanical protection of under ground cable complete all as specified and as directed by Engr-in-Charge
S&F steel tubing galvanised light grade of 40 mm bore dia for fixing to poles for mechanical protection of under ground cable complete with flat iron clamps made of shape as required with 12 mm dia bolts nuts and washers for fixing where required complete all as specified and as directed by Engr-in-Charge of size 40 mm bore dia.
S&F TPN sheet steel power coated double door vertical distribution board 08 way fitted with two cover one screwed cover for incoming and outgoing MCBs and second for protection of MCBs fitted with colour coated Bus bar neutral link earth bar Din rail suitable for use of 240/415 Volts 50 Hz supply including on incomming MCCB 100 Amps Ratings 4 pole, MCB DP 63 Amps ratings 08 Nos. and RCCB 01 Nos. complete all as specified and as directed by Engr-in-Charge. Make: HPL cat Part No. DBVDD08163 or equivalent. (Note: Cost of wall cutting for suitable mounting of DBs in recess alongwith proper connection with suitable lugs and making good disturbed surfaces with PCC work will be inclusive in above this item's quoted price.)
M&L for sub main wiring with 6 sqmm two single core multi stranded copper conductor PVC insulated but unsheathed cable 1100 Volts grade drawn through casing and capping including 4.00 sqmm PVC insulated multistranded copper earth contuinity conductor including taking down old unserviceable sub main wiring complete all as specified and as directed by Engr-in-Charge. ( Note: Cost of hole in wall for any purpose to provide connection in Panel/DBs as per site requirement will be inclusive in unit quoted Rate.
S&F factory made sheet distribution board double door protection class IP-42 double door type suitable for mounting MCB/MCCB conforming to IS 13032 IS- 8623 and BS 5484 with minimum 200 Amps bus bar of under mentioned ratings complete all as specified and as directed by Engr-in-Charge. (Note: Cost of wall cutting for suitable mounting of DBs in recess alongwith proper connection with suitable lugs and making good disturbed surfaces with PCC work will be inclusive in above item quoted price.)
SP & N 12 ways
SP & N 8 ways
Supply and fix MCB 10 KA conforming to IS-8828 : 1996 : IEC-898 : 1995 rupturing capacity of the under mentioned type and rating, 240 V complete all as specified and as directed by Engr-in-Charge.:
SP 32 Amps rating
SPN 63 Amps rating
M&L for earthing complete as per electrical plate No. 3 of MES SSR Part-I with galvanised steel earth plate electrode 60cmx60cmx6.0 mm thick, buried directly vertically in ground in a pit depth not less than 2.5 metres below ground level with top edge of earth plate at a depth not less then 1.8 metre below normal ground level connected to and including galvanised iron or steel earth wire 4 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel. Earthing wire shall be protected by galvanised iron or steel pipe 15 mm bore medium grade and connected to continuous earth wire on pole / test point to main board. Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of soil, charcoal, salt, funnel PCC pit and RCC cover complete all as specified & directed as well as testing included. Note-: Following items deemed to be included in quoted rate (a) Earth Electrode (b) Main earthing lead from earth electrode to test point and further to equipment to be earthed upto 7.5 metre (c) M&L for connecting earth electrode and earthing lead as specified (d) Adequate quantity of charcol dust and common salt as directed (e) All labour involved including testing of earth net work (f) Excavation and earth work or drilling hole for electrode (g) P.C.C pit and C.I cover (h) Funnel and watering pipe, wire mesh and copper lugs etc. as specified (j) G.I protection pipe of size ordered specified for protection of earthing lead from mechanical injury or tempering. (k) connected lead from test point to main switch or switch board or equipment to be earthed rest complete all as specified and as directed by Engr-in-Charge.
M & L for boring under road/drainage to pass GI pipe to protect under ground cable by automatic machine/manual complete all as specified and as directed by Engr-in-Charge.
J.J.ENGINEERING
M/S JALANDRA CONSTRUCTIONS
SAI MAX INFRAPROJECTS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .