WORK TENDER

Amount

Supply (Part-A)

Fabrication , galvanizing, inspection and supply of 220/132 KV DC tower including stubs , box type cross arm if required as per drawing & BOM

Hot dip galvanized, hexagon round hexagon head transmission tower bolts, nuts and washers for above structures as per BOM.

TOWER ACCESSORIES:-

Number Plates

Danger Plates

Phase Plates in set of Red, Yellow,& Blue for Tension Towers

220/132 KV Pipe type earthing material for towers

Composite silicon rubber insulator String 120 KN

Composite silicon rubber insulator String 70 KN

132 KV Bus Post Insulator

Hardware suitable for ACSR Panther

Single suspension fitting

Single tension fitting

Double Tension fitting

Double suspension fitting

Vibration Dampers

Mid Span Compression joint

Repair Sleeves

Bird Guard

PA Rod

Earth wire accessories suitable for 7/10 SWG earthwire.

Tension Clamp

Mid Span Compression joint

Vibration Dampers

Copper Bond

Suspension Clamp

Erection (Part-B)

Survey including preparation of schedule of materials, making of location (route length)

Check survey & final peg making (Route length)

Cost of Excavation of 220/132 KV DC tower transmission pits including all earth work, backfilling and leveling.

Setting of stubs including all foundation work but excluding the cost of concreting and excavation (Rate per location) for following 220/132 KV DC towers :

DA Towers

DB Towers

DC Towers / Gantry

Cost of Concreting for 220/132 KV DC tower/gantry foundation including cost of cement, dewatering , shoring and shuttering, forming, curing but excluding cost of reinforcement bars with 1:2:4 mix concrete (RCC)

Erection of Superstructure of 220/132 KV DC towers/Gantries and including all work above ground level excluding hoisting of insulators, hardware & accessories but including fitting of danger number phase plate, bird guard and fixing & punching

Tack welding of all the bolts up to the height of first section of DC towers or 5 mtrs from ground level whichever is higher with three tacks of 10mm/12mm electrode & application of zinc rich paint on the affected surface including cost of materials..

Grounding work including earth wire etc. for pipe grounding including cost of cake & salt

Installation of steel reinforcement bars in R.C.C foundation including cost of steel reinforcement bars with cutting, bending , placing, binding etc.

Laying stringing, tensioning, clamping, jointing etc. of ACSR Panther conductor including hoisting of insulators, fitting of all necessary hardware and accessories i.e. fittings Armour rods, vibration dumpers etc. on three phases on 220/132 KV DC towers.

Laying, Stringing, tensioning, clamping, jointing etc. of 7/10 SWG ground ware including fitting of all necessary hardware and accessories on 220/132 KV DC tower (per route KM)

JAGAT ELECTRICAL & FABRICATORS

KUMAR TRADING COMPANY