Up-Gradation of CTP Office Rooms including Civil Electrical and Air Conditioning Works at Helicopter Division HAL HC

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Year of Estblishment of Company/Business

If Other, please specify

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,

Address for correspondence:

TIN number

PAN no and Name of Holder

PF number (If any)

ESI number

Service Tax Registration No

Goods and Service Tax ID No.

SAC Code

Contact details

Registered Contractor

Pls Enter

Need to Fill Column 19

Maximum value of works excuted during the followinf 5 years. . (In Lakhs)

Pls enter Finiancial Turnover in Rupees for all the years

DETAIL OF WORK ON HAND UPTO N-Months (N-contract period) [For Bid capacity calculation] NOTE : PROVISION for 10 works are given. If more, a separate similar sheet to be made showing all the works with all details as per this FORMAT and same to Uploaded. However, 9 works details to be provided and balance work value of other works to be added and to be provided in 10th row as OTHER works.

Name of Organization with address

Balance Work On Hand

Work Schedule for completion of works with in stipulated time [Please enclose action plan / bar chart as to indicate the completion of work, within the scheduled time (contract period)]

Quantity of work Excuted during the last three years

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No.

Bank Statement for past three month

Latest Over draft Facilties with Bank enter Name of Bank, Date of Issue and Value of Over Draft

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender Notice.

#VALUE!

Experience of having successfully completed similar works during last 7 years ending on the previous day of submission of tender. [Work experience certificates / Completion certificates should be uploaded for verification]. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of the estimated cost. [Amount put to the Tender]

You are Not Eligible

Type of Work [ Incase of private works the same shall be supported with TDS certificate]

Type of Work [ Incase of private works the same shall be supported with TDS certificate]

work done

Type of Work and Organisation name [ Incase of private works the same shall be supported with TDS certificate]

#VALUE!

Related Document to be Uploaded to eProcurement Portal

DEAILS OF TECHNICAL PERSONNEL AVAILABLE( if space provided is insufficant separate sheet to be uploaded with the same format as below)

Name of members or technical personllel avalable in the organization

DETAILS OF MACHINERY AVAILABLE

Name of Mechinery

Concrete Mixers - Type etc

Vibrators - Diesel - Electrical

Weiding equipment's

a) Rectifiers

b) Welding Generators

Erection equipment's

Cranes-

Hoists-

Lifts-

Water Lifting motor pumps

a) Diesel

b) electric

Drilling Equipment's

Compressors

Trucks

Stone crushers

Bitumen hot mixture plant

Bitume boiler

Rollers

Batching plants

Vibratory rollers

Generators

Cranes-Details

Concrete pumps

Road Pavers

Rock breakers

Transit mixers

Excavators

Weight batches

Others

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

DECLARATION

Pls enter

Tender Document Cost and EMD details

Enclosed / Not enclosed

Enclosed

Enclosed

Average annual financial turn over during the last 3 years, ending 31st March 2025 [ should not be less than 30% of amount put to tender] and details for last 5 years to be provided to assess the bid capacity. The values provided to be supported by uploading Balance Sheet along with Profit & loss account statement. . (In Lakhs)

Specification

Dismantling wooden boardings / gyspumboards, silicate boards in lining of walls and partitions of thickness up to 40mm, but including stacking within 50 metres lead and disposal of unwanted materials outside HAL upto a distance of 10km, etc., all complete as directed by Engineer-in-Charge.

Demolishing RCC work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 10 kilometre outside HAL, stacking serviceable and unserviceable material separately including cutting reinforcement bars, after making temporary proetction for existing service lines, etc., all complete as directed by Engineer-in-Charge. Note: Necessary temporary supports for existing structure to be provisioned during demolision activities.

Demolishing brick work with cement mortar manually / by mechanical means, after disconnecting the electrical service and AC lines if any, including stacking of serviceable material and disposal of dismantled materials up to a lead of 10 kilometre outside HAL, etc., all complete as directed by Engineer-in-Charge. Note: Necessary temporary supports for existing structure to be provisioned during demolision activities.

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of EIC Nominal concrete 1:4:8 or richer mix (i/c equivalent design mix) and including stacking material and disposal of dismantled materials up to a lead of 10 kilometre outside HAL, after making temporary proetction for existing service lines, etc., all complete as directed by Engineer-in-Charge.

Dismantling or Removal of doors, windows / ventilators and clerestory windows (steel or wood or glass) shutter including chowkhats, glass, architrave, holdfasts and other fixtures, etc., complete and stacking within 50 metres lead, of area measuring upto 3.0Sq m, including stacking material and handing over the useful materials to HAL maintenance department and disconnecting the service lines, etc., all complete as directed by Engineer-in-Charge. Note: Necessary temporary supports for existing structure to be provisioned during demolision activities.

Dismantling or Removal of doors, windows / ventilators and clerestory windows (steel or wood or glass) shutter including chowkhats, glass, architrave, holdfasts andother fixtures, etc., complete and stacking within 50 metres lead, of area measuring more than 3.0Sq m, including stacking material and handing over the useful materials to HAL maintenance department and disconnecting the service lines if any, etc., all complete as directed by Engineer-in-Charge. Note: Necessary temporary supports for existing structure to be provisioned during demolision activities.

Dismantling / Removal of Aluminium partition, Gypsum partitions, wall boards, ceiling boards, including glazings and existing False ceiling with grids & tiles with all related fixtures and accessories including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead or handing over to user department, etc., all complete as directed by Engineer-in-Charge.

Dismantling / removing vitrifed / mosaic Tiles, granite, PVC sheets (upto 25mm tile thickness) in floors and walls laid on cement mortar ,after disconnecting the electrical service and AC lines if any, including stacking material and disposal of dismantled materials up to a lead of 10 kilometre outside HAL, etc., all complete as directed by Engineer-in-Charge.

Dismantling of flushing cistern of all types (CI / PVC / Vitrious China) including all accessories and stacking of useful materials near the site, making temporary arrangemnst to avoid water leakage and disposal of unserviceable materials within 50 metres lead, etc., all complete as directed by Engineer-in-Charge.

Dismantling of road gully chamber / trap of various sizes including CI grating with frame and making temporary arrangements to protect ongoing service lines, including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap, etc., all complete as directed by Engineer-in-Charge.

Dismantling CI / asbestos / PVC water pipes with fittings and clamps including stacking the material within 50 metres lead and handing over the useful materails to user department, etc., all complete as directed by Engineer-in-Charge.

100mm dia pipe metre

150 m dia pipe

Dismantling EWC / IWC Pans / urinals / Basin sinks with associated fixtures and accessories of all sizes including disposal of dismantled materials i/c malba, making temporaray arrangements for blocking service lines to avoid water leakages, etc., all complete as directed by Engineer-in-Charge.

Dismantling 15 to 40mm dia GI / CPVC pipe including stacking of dismantled pipes (within 50 metres lead) including making temporary arrangements for continuing ongoing services to toilets, etc., all complete as directed by Engineer-in-Charge.

Disposal of surplus excavated earth / moorum / building concrete / granite / wood / rubbish / malba / similar unserviceable, dismantled or waste material of partitions, ceiling boards, tiles, frames, etc., by mechanical transport including loading, transporting, unloading in all lifts / loads upt 10km distance from HAL, etc., all complete as directed by Engineer-in-Charge.

Supplying, mixing and placing plain cement concrete (1:2:4) of required thickness using 20mm nominal size down graded hard stone / granite aggregate in accordance with IS 456 in Floor leveling / lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, plinth, etc., including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions, etc., but excluding the cost of centering, shuttering and finishing, etc., all complete as directed by Engineer-in-Charge.

Supplying, mixing, laying (average) 40mm thick plain cement concrete flooring (1:2:4) using 20mm nominal size graded aggregates in sub bases, floors and pavings, etc., finished with a floating coat of neat cement, including cement slurry, including consolidation, necessary formwork, curing, materials, labours, tools and tackels, plants, etc., but excluding the cost of nosing of steps, etc., all complete as directed by Engineer-in-Charge.

Providing and laying in position ready mixed or site batched design mix Cement Concrete of M25 grade with minimum cement content of 330 kg / Cu m for reinforced cement concrete work like, footing, pedestal, columns, beams, lintles, chajjas / canopies, staircases, sills, fins, shelves, flooring, stage, etc., using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength including pumping of concrete to site of laying, curing, carriage for all leads, etc., all complete as directed by Engineer-in-Charge. Note 1. Form work and reinforcement steel will be paid separately.

All works upto plinth level like footing, pedetsal, piles, plinth beam, drains including necessary openings and packing if any for laying pipes, cables, etc.,

All works above plinth level like column, beams, slabs, canopy, chajja, stairscase, etc., level including necessary openings and packing if any for laying pipes, cables, etc.,

Formwork for Lintel Beams, Window sills, etc., by providing timber, wooden planks, runners / MS sheets with all supports, struts, braces, wedges, scaffolds, bracings, ladders, gangways, dressing with oil including MS bolts nuts and washers, temporary openings, filleting for a stop, chamfered edges, internal / external splayed, rounded angles or grooves for forming throating including making temporary openings in the forms for pouring concrete, etc., as per drawing, etc., all complete as directed by Engineer-in-Charge. Note: Formwork material is contractor's own property and shall be removed after completion of work.

Foundations, footings, bases of columns, for mass concrete, etc.,

For Columns, Pillars, Piers, Abutments, Posts and Struts

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Suspended floors, roofs, landings, balconies and access platform

Supplying, straightening, fabricating and fixing Steel reinforcement of HYSD TMT bars of not less than Fe 500 conforming to IS 1786 for all concrete reinforcment members / works including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.90mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it, etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge. Note :1. For measurement, the weight of steel sections, plates, reinforcement steel bars, wire fabrics, etc., shall be calculated from the tables given in relevant Indian standards or actual whichever is less. Where the weight is not given in Indian standards, it shall be calculated at 7850 kg/m³. No tolerance on account of rolling margin shall be allowed on the nominal weight of steel sections.

Providing and fixing MS grills of required pattern in frames of windows, etc., with MS flats, square or round bars, etc., including priming coat with approved steel primer, etc., all complete as directed by Engineer-in-Charge.

Supplying, fabricating, hoisting and fixing in position MS structual steel work E 250 (Fe 410W) in roof trusses, purlins, girders, stanchions, crane gantries, rails, edging angles, frames, fastenings, machine foundations, Deck sheets as per site requirement, etc., using standard steel rolled sections, including MS plates, foundation bolts, cutting to dead length where required, notching, drilling, riveting and / or welding, connecting with bolts and nuts, wedging, plumbing, truing up and painting the members with two coats of synthetic enamel paint over a coat of approved zinc chromate primer, preparation of surface, etc., all complete as directed by the Engineer-in-Charge.

Supplying and laying Brick work with common burnt clay machine moulded modular bricks of class designation 7.5 with CM (1:6) for walls, chambers, ducts, drains, etc., at all levels & heights including hoisting and setting in position and along with necessary formwork, curing, finishing, making or leaving holes & chases and making making horizontal and vertical grooves 10mm wide 12mm deep before plastering, etc., all complete as directed by Engineer-in-Charge.

Supplying and laying Half Brick work with common burnt clay machine moulded modular bricks of class designation 7.5 with CM (1:4) for walls, chambers at all levels & heights including hoisting and setting in position and along with necessary formwork, curing, finishing, making or leaving holes & chases and making making horizontal and vertical grooves 10mm wide 12mm deep before plastering, etc., all complete as directed by Engineer-in-Charge.

Plastering to internal brick/block wall with 15mm thick on the rough side of single or half brick wall of cemnet mortor (1:6) including leveling,curing and making the level smooth and at all heights, plaster drip course / groove in plastered surface or moulding to RCC projections and execute the work, etc., all complete as directed by Engineer-in-Charge.

Providing and applying internal wall and ceiling painting with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50grams / litre after applying white cement based putty of average thickness 1mm over the plastered wall / existing surface including preparation of the surfces by scrapping existing paint / stains, with a coat of low VOC primer with emery paper to bring to smooth and even including applying additional coats wherever required to achieve even shade and colour of approved brand, etc., all complete as directed by Engineer-in-Charge.

Providing, applying and Finishing walls with Acrylic Smooth exterior paint of required shade with Two or more coat applied @ 1.67 ltr/10 Sq m over and including priming coat of exterior primer applied @ 0.90litre/10 Sq m) over the plastered wall / existing surface including preparation of the surfces by scrapping existing paint / stains, to achieve even shade and colour of approved brand, etc., all complete as directed by Engineer-in-Charge.

Providing and applying synthetic enamel paint of approved brand and manufacture of required colour to give an even shade in One or more coats on old work by cleaning and srcapping to make the surface smooth before appling paint, etc., all complete as directed by Engineer-in-Charge.

Providing and painting interior surfaces with two coats of Royal / Silk luxury emulsion or equivalent paint with textured finish of approved make, colour, shade,tint & pattern at all levels, over a coat of approved alkali, resistant primer including preparing the surface by removing loose dirt and any organic growth, smoothening the surface by using suitable emery paper, filling crevices and finishing even by applying putty, necessary scaffolding, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing factory made Three track three panels uPVC sliding glazed window upto 2.10m (Partly fixed if required for site condition) in height dimension comprising of lead free uPVC multi-chambered frame, sash and mullion / coupler (where ever required) extruded profiles having minimum wall thickness of 2.10mm with minimum frame [115 x 45]mm & both glazed and fly screen sash [44 X 55]mm with zinc alloy powder coated handle on every glazed panel along with suitable locking system confirming to EN:12608 in any shape,colour (Excluding white) and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD specification, uPVC extruded glazing beads,interlocks and inline sash adaptor (where ever required) of approriate dimension, EPDM gasket, hadrwares, SS304 fastners of minimum 8mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS1367:Part I to 14, Plastic packers, plastic caps and necessary stainless steel screws, etc., Profile of frame, sas & mullion shall be mitred cut and fusion welded / mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware's and drainage of water, etc., After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, make it operational with all accessories, etc., all complete as per approved drawing & direction of Engineer-in-Charge. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. (Glass to be paid separately)

Providing and fixing factory made uPVC glazed / white Ventilator casement window single panel with or without fixed panel with SS 304 friction hinges as per size and weight of sash, single point locking zinc alloy (zamak) powder coated handle, with using minimum frame of [39 X 39]mm & sash / mullion of [39 x 60]mm (height of the ventilator upto 1.20m) made of required shape & size as per CPWD specification, including uPVC extruded glazing beads, interlocks and inline sash adopte r(where ever required) of appropriate dimension, EPDM, gasket, hardware, stainless steel (SS 304 grade) fasteners of minimum 8mm dia with counter sink head, comprising of matching polymide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 :Part 1 to 14 size for plastic packers, plastic caps and necessary stainless steel screws, etc., Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded / mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware's and drainage of water, etc., After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, etc., all complete as per approved drawing & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by EIC.

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partitions / panes, etc., with 6mm thick clear float glass both side, having 12mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant), etc., as per specifications, drawings and direction of Engineer-in-Charge.

Supplying and fixing / erection of minimum 6mm thick toughened glass in UPVC / Alluminum partitions, doors, windows, etc., as per the architectural drawings including gasket & necessary beedings as per IS standards, etc., all complete as directed by Engineer-in-Charge.

Filling the gap (Upto 10mm depth and 10mm width ) in between aluminium / stone / wood frame and adjacent RCC / Brick / Stone / wood / Ceramic / Gypsum work by providing weather / structural non sag elastomeric PU sealant over backer rod of approved quality complying to ASTM C920, DIN 18540-F & ISO 11600 as per architectural drawings, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing Granite stone slab of with (18mm to 25mm thick), area of slab not less than 0.50Sq m, like Ruby Red / Black / Cherry with gang saw cut, mirror polished, premoulded and prepolished, machine cut for platforms, vanity counters, and similar types of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4, joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish, etc., all complete as directed by Engineer-in-Charge.

Providing and laying Double Charged vitrified floor tiles of size of [600 X 600]mm or nearest availabe sizes, in floors over a screed of cement mortar (1:4) 20mm thick for Paper Joint (Thickness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 course sand), including grouting the joints with grey cement slurry @ 3.3 Kg/Sq m including grouting the joints with white cement and matching pigments, etc., all complete as directed by Engineer-in-Charge.

Providing and laying Glazed Vitrified tiles Matt / Antiskid finish of size approximate size [600 X 600]mm or site required size, finish with Paper Joint in different sizes (Thickness to be sepcified by the manufacturer) with water absorption less than 0.08% and confirming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 course sand), including grouting the joints with grey cement slurry @ 3.3 Kg/Sq m including grouting the joints with white cement and matching pigments, etc., all complete as directed by Engineer-in-Charge.

Providing and laying Glazed Vitrified tiles in Skirting / Wall cladding inside pantry / wash area / toilets over a screed of cement mortar (1:3) -Size of Tile [600 x 600]mm or nearest size available (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.30Kgs/Sq m including grouting the joint with white cement & matching pigments, etc., all complete as directed by Engineer-in-Charge.

Providing and Installing tetsing and commissioning white colour vitreous china battery based infrared sensor operated urinal of approximate size [610 x 390 x 370]mm having pre & post flushing with water (250 ml & 500 ml consumption approximate), having water inlet from back side, including fixing to wall with brackets embedded in cement mortar (1:3), connecting the waste pipe / waste coupling to floor trap with all necessary fittings and accessories like 32mm dia semi-rigid PVC waste pipe (concealed in the wall) including PVC waste fittings, clamps, etc., all complete as per manufacturer's specification and direction of Engineer-in-Charge.

Providing and fixing 15mm nominal bore dia CP brass Taps / bib cock of approved quality conforming to IS as suitable to site conditions, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing 15mm nominal bore dia CP brass long nose bib cock of approved quality conforming to IS standards and as suitable to site conditions, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing 15mm nominal bore dia CP brass long body bib cock of approved quality conforming to IS standards and as suitable to site conditions, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing PTMT shelf / Towel rails 440mm long of approved quality and colour, weighing not less than 300 gms or nearest available size complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing bright finished brass hard drawn hooks (coat hooks) and eyes of 300mm size, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing Toughened glass shelf of approved make with approximate size [600 x 120 x 5]mm with edges round off, supported on anodised aluminium angle frame with CP brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing CP brass toilet paper holder of approved brand and fixing with screws, raw plugs, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing beveled edge mirror of minimum size [600 x 450]mm of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers, etc., all complete as directed by the Engineer-in-Charge.

Constructing masonry Chamber [60 x 60 x 75]cm inside or outside (or approximate size as per site condition), in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with CI surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5, etc., all complete as directed by the Engineer-in-Charge.

Constructing Manhole with Inside size [120 x 90]cm and 90cm deep including CI cover with frame of 116Kg, using sewer brick (confirming to IS 4885) in cement mortar 1:4 with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design, etc., all complete as directed by the Engineer-in-Charge.

Providing, fixing, testing and commissioning trap (floor trap) of approved make with 100mm inlet and 75mm outlet of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors, connection with PVC soil / waste pipe, necessary 150mm thick cement concrete (1:2:4) for embedding the trap, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing Single socketed pipes of 110mm diameter unplasticised Rigid PVC water pipes conforming to IS : 13592 Type A of approved brand, on wall / floor face including bends, collars, elbows, shoe, etc., jointing with / without seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes in concealed work, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints, etc., all complete as directed by the Engineer-in-Charge. Note1. Dual line to be executed (Hot & Cold).

15mm nominal dia Pipes

20mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes on external surfaces exposed, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints, etc., all complete as directed by the Engineer-in-Charge. Note1. Dual line to be executed (Hot & Cold).

25mm nominal dia Pipes

32mm nominal dia Pipes

40mm nominal dia Pipes

Disconnecting damaged overhead / terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting to ground level or handing over to user department office, etc., all complete as directed by the Engineer-in-Charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes and making it operational, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing Single socketed pipes of 110mm diameter SWR pipes of Type B confirming to IS 13592 of approved brand for Urinal, Basin & EWC out lets including bends, collars, elbows, shoe, etc., jointing with / without seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing Single socketed pipes of 75mm diameter SWR pipes of Type B confirming to IS 13592 of approved brand, on wall / floor face including bends, collars, elbows, etc., jointing with/without seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing Second Class Teak wood for frames of doors, windows, hand rails, frame work for partitions, paneling, table stands, etc., cut to shape and required curvature with polishing fixed in position with hold fast lugs / with dash fasteners of required dia & length / SS Screws at all heights, with necessary moisture content test, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing 35mm thick flush door shutters conforming to IS :2202 (Part I) non-decorative type of approved brand / make, core of block board construction with frame of 1st class hard wood & lipping with 2nd class teak wood battens 25mm minimum depth on all edges and well matched commercial 3ply veneering with vertical grains or cross bands including ISI marked Stainless Steel butt hinges / 180 degree type with necessary screws and polish veneers on both faces of shutters and making rectangular vision panel of 0.50Sq m with 6mm thick clear heat strengthened glass, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing bright finished brass handles of 125mm size with screws, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing bright finished brass tower bolts of [250 x 10]mm (barrel type) with necessary screws, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing bright finished brass 100mm mortice latch and lock with minimum 4 levers and a pair of lever handles of approved quality with necessary screws, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35Kgs and door width upto 700mm), with necessary accessories and screws, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing aluminium sliding door bolts (aldrop) of [250 x 16]mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section [90 x 45]mm having single rebate of [32 x 15]mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. MS stay shall be provided at the bottom to steady the frame, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing 30mm thick Fiberglass Reinforced Plastic (FRP) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of FRP laminate conforming to table - 3 of IS: 14856 of approved brand / type, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing 12mm thick frameless toughened glass door shutter with all accessories like railer, handle, stopper, locks of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes, etc., for fixing required door fittings, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing 12mm thick commercial ply conforming to IS : 1328 BWR type plain lining / with pattern / grooves with necessary screws / nuts & bolts / nails / fastners for wall panelling, shelves, etc., including a coat of approved primer on one face, and fixed on wooden / steel frame work / Plastered surfaces, etc., all complete as directed by the Engineer-in-Charge. (If Frame work is carried out, shall be paid separately under wooden frames item)

Providing & Fixing decorative high pressure 1.0mm thick laminated sheet of plain / wood grain in gloss / matt / suede finish to required pattern and combination as per the drawings, etc., for wall panelling, shelves, etc., on plywood with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality / brand, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing 19mm thick both side balancing lamination of suitbale selcted colour factory pressed BWP grade marine ply as per IS : 710 of approved brand boxes, shelves, racks, almirah, cupboard and drawer, etc., including necessary nails, screws, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing stainless steel fancy handle (upto 200mm long) of approved make fixed with SS screws, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make / brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing factory made uPVC Fixed partitioncomprising of lead free uPVC multi-chambered frame, sash and mullion / coupler (where ever required) extruded profiles having minimum wall thickness of 2.10mm for using R4 series frame (64mm & above) x (50mm & above) & mullion (55mm & above) x (65mm & above) for the heights above 2.50 metre, conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws, etc., Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded / mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water, etc., After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, etc., all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Glazing as per site requirements and conforming to IS: 3548 shall be paid separately.

Providing and fixing FALSE CEILING with 12.50mm thick tapered edge gypsum plain board with conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks of approved brand) at all height including providing and fixing of frame work made of special sections, power pressed from MS sheets and galvanized with zinc coating of 120 gms / Sq m (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.60mm thick with flanges of 27mm and 37mm, at 1200mm centre to centre, one flange fixed to the ceiling with dash fastener 12.50mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of [25 x 10 x 0.50]mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate GI channels [45 x 15 x 0.90]mm running at the spacing of 1200mm centre to centre, to which the ceiling section 0.50mm thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.50mm, at 450mm centre to centre, shall be fixed in a direction perpendicular to GI intermediate channel with connecting clips made out of 2.64mm dia x 230mm long GI wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size [3.50 x 25]mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended

Providing and laying water proofing treatment in sunken portion of WCs, bathroom, etc., by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) First layer of slurry of cement @ 0.488 Kgs/Sq m mixed with water proofing cement compound @ 0.253 Kgs/Sq m. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 Kgs/Sq m mixed with water proofing cement compound @ 0.126 Kgs/Sq m. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry, etc., all complete as directed by Engineer-in-Charge.

Providing and Installing tetsing and commissioning Wall hung type European water closet of KOHLER (modern edge series of colour peacock / white / thunder grey or any other equivalent high end version of approved brand like Jaquar / ROA / CERA, etc., with seat and lid high end with quite close, UF seat, Pnuematic water tank of 6 Litres capacity with full frame, Pneumatic soft touch face plate, flush valves, faucet, P & S trap, dual support chair bracket, drain connectors and with all connecting fittings including health faucet and fixtures to make it operational completely, including labour, cutting and making good to the walls and floors wherever required, etc., all complete as directed by Engineer-in-Charge.

Providing and Installing tetsing and commissioning of 600mm edge modern life series of KOHLER (peacock / thunder grey / white) or any other equivalent high end version of Vanity counter wash basin of approved brands like Jaquar / ROCA / CERA, etc., vessel basin without faucet hole in including CP bottle trap, grid drain and all other accessories like 15mm CP brass pillar taps to suit the basin (Hot & old water mixer), 32mm CP waste coupling ofstandard pattern, including necessary cutting and making good to the walls / floors where ever required, Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling and all othe accessories to make it operational of wash basin, etc., all complete as directed by Engineer-in-Charge.

Providing and Fixing stainless steel railing with glass-side mounted, supply and Installation of mobel make, saintgobain or equivalent SS304 grade minimum 900mm high railing made of SS304 grade handrail pipe of 50mm OD and 1.60mm thickness, polish with automatic round polishing machine to get uniform hairline finish K240 mounted with help of adjustable solid neck support on balustrade of approved design at 900mmm centre to centre (or actual division as per the site conditions), fitted with four Nos, solid glass connectors for holding the infill glass of 12mm thick toughened galss and laminated, glass connectors to be fitted with balustrade with the help of SS screws overall mounted on SS 304grade solid plate [100 x 8]mm with the help of dash fastners (HILTI, FISCHERS make or any other equivalent standard makes, etc., all complete as directed by Engineer-in-Charge.

Supply & fixing wall to wall shower enclosure of size around / approximate [1.75 x 2.10]m consisting of fixed and sliding portion using minimum 10mm thick toughned glass including SS polished fittings of approved make like stopper, end wall clip, bottom guide, roller, handles, gasket, top rack, wall to glass or floor to glass connector, wall to glass connector 90 degree, weather seal, etc., all complete as directed by the Engineer-in-Charge.

Supply and fixing shower panel of approved make with inbuilt ABS top shower, hand shower with flexible hose, brass spout, thermostatic mixer with diverter including screws, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing internal surface drywall partition of 100mm thick, using 12.50mm thick Gypsum board on both side with suitable GI sections and frames including joint tapes, compound filling and painting with one coat of primer & two coats of enamel paint after applyiong 1mm thick patti for obtaining uniform surface, etc., all complete as directed by Engineer-in-Charge.

Supply and Fixing WPC panellingon wall and ceiling with WPC (Wood polymer composite)fluted panels of approximate size [2950 x 195 x 27]mm of Leben, Alutuff / Murrato or any other equivalent make of approved shad,pattern and colours, including all required hardware fittings and fixtures as required to fix the same on wall and ceiling including corner beading and fastners, etc., all complete as directed by Engineer-in-Charge.

Supply and Fixing of Aluminum Hollow Cube Section [50 x 25]mm with necessary clit and screws of 12mm BWP plywood fixed with 12.50mm gypsum Designer board and Finishing the same as per required asthetic, etc., all complete as directed by Engineer-in-Charge.

Supply and fixing 10mm thick toughened glass over the steel purlins and frames with necessary pivots, bushes, vaccum rubbers, other required fixtures, grouting materials for external exposed areas and making water tight, etc., all complete as directed by Engineer-in-Charge.

Creation of 3D walkthough inluding 3D rendering images as per the inputs provided by HAL (Division requirement) and playing the video for minimum one minutes (60 seconds) Scope: Visualizing the structure along with its external surroundings and illustrating the internal layout, staff rooms, conference rooms, Toilets, Balcony and Wall paneling, Ceilings, display items, etc., using box representations for complex elements, etc., all complete as directed by Engineer-in-Charge.

Supply, erection, testing & commissioning of Indoor type LT Panel with MS stand.

Incomer

1No - 400A, 415V gr. 4P 50KA MCCB.

Lot - 500A , 415V, short circuit rated 50KA for 1sec, Aluminium bus bars with busbar insulators, heat shrinkable PVC sleeves etc.

1No- Multi function meter (MFM/MDM) suitable for 3ph, 4 wire, 240V(L-N), 5A, CL-1, RS 485 Port Digital MFM/MDM of EM6400NG of Schneider or any equivalent make meeting technical specification of above MFM complete in all respect.

1Set of - 400/5A current transformers of class I and suitable VA burden for metering.

1Set - RYB indicating lamps of LED module with 6A SP MCB.

1Set- 6A, MCB for the protection of measuring instruments.

Outgoings:

1No - 125A 415V gr. FP 36KA MCCB.

4Nos - 100A 415V gr. FP 36KA MCCB.

1 No - 63A 415V gr. FP 36KA MCCB.

1 No - 32A 415V gr. FP 36KA MCCB.

12 Nos - 32A 240V gr. DP 10KA MCB.

Supplying, Installation, Testing & Commissioning of 36W Panel light 2x2 ft., of Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) <19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). (As per CPWD Specification).

Supplying, installation, Testing & Commissioning of following wattage LED Recessed/surface Down lighter (Round/square/ Rectangular) SMD type of Powder coated die cast /Extruded aluminium Body including trim material with PMMA and prismatic diffuser and construction as per IS : 10322 with river as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10%, P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) <19, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sqmm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). (As per CPWD Specification).

Linear Profile / Wall Washer luminaires

Supplying, Installation, Testing & Commissioning of LED Flexible Strip light(5mtr Roll each) with IP67 rating sealed with anti-UV resistance, silicone material without color shifting, wattage of 9Watt/Mtr. Universal PCB width for perfect installation with aluminum profile. SMD LED's, CRI > 80, CCT: 3000K/4000K, 8mm white PCB, overall width 10mm after IP rated, Supply voltage 24VDC, Long life span 50K hrs. L70B50@25°C , High density of LED array for dot-free linear lighting performance, better color consistency for visual comfort, Lead cable (300mm) with including necessary interconnections between driver and lighting fixtures complete in all respect and as directed by EIC. The LED strip may be of model no:K-LITE Niva 15 or Equivalent make in other approved makes.

Supplying, Installation, Testing & Commissioning of 24V Series Waterproof IP67 Power Supply [Dimension : 199 x 43 x 34mm] 24Vdc 2.5 Amps 60W including necessary interconnections complete in all respect and as directed by EIC. The Driver may be of model no:K-lite-KL 68197 or Equivalent make in other approved makes.(For LED strip light fixtures)

Supply, fixing to ceiling using suitable mounting arrangements, testing & commissioning of decorative type pendent LED light fixture of minimum wattage of 24W including driver, the driver shall have PF >0.9 operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections between driver and lighting fixtures complete in all respect. The lighting fixture may be Philips model no 41055 pendant or equivalent in other HAL approved makes and as directed by Engineer-in-charge.

Supply, fixing to false ceiling using suitable mounting arrangements, testing & commissioning of 10W pop up LED downlighter with 3550 rotation and 900 tilt for directional adjustment, lumen efiiciency ≥ 95lm/w, CCT(0K): 3000/4000/5700 along with suitable driver, the driver shall have PF >0.9, THD<10% operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections between driver and lighting fixtures complete in all respect. The lighting fixture may be Havells model no: UNECOPOPUPR10WLED or equivalent in other HAL approved makes and as directed by Engineer-in-charge.

Supply, fixing , testing & commissioning of surfcae mounted 8W LED downlighter lumen efiiciency ≥ 95lm/w, CCT(0K): 3000/4000/5700 along with suitable driver, the driver shall have PF >0.9, THD<10% operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections between driver and lighting fixtures complete in all respect. The lighting fixture may be Havells model no: UNECOSURFDLS8WLED or equivalent in other HAL approved makes and as directed by Engineer-in-charge.

Supply, Installation, Testing and Commissioning of 1200mm Sweep ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(Aluminium alloy) blades, suitable length down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body. Power Factor not less than 0.9, Service Value (CM/Min/Watt) > 6.0, minimum air delivery 210CM/Min, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. As per CPWD Specification.

Supply, installation, testing & commissioning of 400mm dia wall mounted swing type fan with minimum air delivery 95CM/Min, connecting cord with 6A, 3 pin plug top and with all necessary accessories complete in all respects and as directed by Engineer-in-charge.The wall fan may be Havells model no: Swing HS wall or equivalent in other HAL approved makes and as directed by Engineer-in-charge.

Supply, installation, testing & commissioning of Industrial type heavy duty Exhaust Fan (1 phase) of 300mm dia of any approved make with louvers, connecting cord with 6A, 3 pin plug top and with all necessary accessories, including making wall openings and replastering to smooth finish with matching paint etc., complete in all respects and as directed by Engineer-in-charge.

Supply, installation, testing & commissioning of 200mm dia PVC type Exhaust Fan with louvers, minimum air delivery of 850CMH, connecting cord with 6A, 3 pin plug top and with all necessary accessories, complete in all respects and as directed by Engineer-in-charge. The exhaust fan may be Havells model no: Ventil air DX HS or equivalent in other HAL approved makes and as directed by Engineer-in-charge.

Supplying, Installation, Testing and commissioning of Passive Infrared (PIR) technology based occupancy sensor having high performance, non regulating programmable type, suitable for connected load upto 10Amp, for mounting height up to 3 meter and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.

Supplying, Installation, Testing and commissioning of Microwave technology based occupancy sensor having high performance, non regulating programmable type, suitable for connected load upto 10Amp, for mounting height up to 3 meter and for 5m X 20m coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.

Distribution Boards

8way VTPN MCCB DB.

4 way HTPN MCB DB

MCCBs, MCBs & RCBO

125A 25kA FP 415V, MCCB

63-100A 25kA FP 415V, MCCB

40-63 amps. ratings, FP MCB, "C" curve, 10 KA breaking capacity.

25-32 amps. ratings, FP MCB, "C" curve, 10 KA breaking capacity.

40-63 amps. ratings, TP MCB, "C" curve, 10 KA breaking capacity.

5A to 32A TP MCB 10kA , C Curve

5A to 32A SP MCB 10kA , C Curve

Supply, installation(surface/recess), testing and commissioning of 2/3/4 Way Powder coated Enclosure with provision to mount MCB/RCCB/RCBO and other modular devices.

Supply, laying, testing & commissioning of following size Aluminium LT armoured power cables.

3.5CX 50 Sqmm Aluminium armoured conductor

3.5CX 185 Sqmm Aluminium armoured conductor

Supply, laying, testing & commissioning of following size Copper LT Unarmoured power cables.

4C X 35 Sqmm Copper Unarmoured conductor LT Cable

4C X 16 Sqmm Copper Unarmoured conductor LT Cable

4C X 10 Sqmm Copper Unarmoured conductor LT Cable

4C X 6 Sqmm Copper Unarmoured conductor LT Cable

4C X 4 Sqmm Copper Unarmoured conductor LT Cable

Supplying, laying, testing & commissioning of following size and LT Control Cables - unarmoured Copper Conductor of 1.1 KV grade confirming to IS: 7098 ( part-I)/1998 with upto date amendment including stacking at site, proper storage complete etc. as required

2C X 1.5 Sqmm Copper unarmoured conductor LT control Cable(for AC units communication cable)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE armoured aluminium conductor cable of 1.1 KV grade as required

3.5C X 185 sq. mm Al arm cable

3.5C X 50 sq. mm Al arm cable

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required

3.5C X 185 sq. mm Al arm cable

3.5C X 50 sq. mm Al arm cable

Supplying and making end termination with brass compression gland and Copper lugs for following size of PVC insulated and PVC sheathed / XLPE armoured copper conductor cable of 1.1 KV grade as required.

4Cx35Sqmm Unarmoured Copper cable

4Cx16Sqmm Unarmoured Copper cable

4Cx10Sqmm Unarmoured Copper cable

4Cx6Sqmm Unarmoured Copper cable

4Cx4Sqmm Unarmoured Copper cable

Wiring for light point / fan point / exhaust fan point/call bell point from nearest switch box with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, fan regulator, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (as per detailed CPWD specifications for Group C wiring)

Wiring to single light point/Fan point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.

Wiring to two light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.

Wiring to exhaust fan point using 6A, 250V gr. flush type modular SP switch housed along with other lighting switches/separate switch box if required and 3pin 6A, 250V gr. modular type socket housed near the exhaust fan complete in all respects.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2sets of 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required

Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

3 x 2.5 sq. mm

3 x 4 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

20MM PVC Conduit

25MM PVC Conduit

32MM PVC Conduit

Supply and fixing on wall/ partition wall using necessary mounting arrangements for 105x50mm size DLP-PVC adaptable trunking system with separation partition for laying power and Data/Telephone cables/wires with full top cover, necessary accessoires such as end caps, flat angle, T joints, external/internal angle, flat junction, Body joint, cover joint, required cabling accessories etc., complete in all respects as directed by Engineer-in-charge.

Supply, fabricating and installing of Following size perforated GI cable trays with cover including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling/fixing to the wall/RCC beam/iron structures as per site requirement complete in all respects and as directed by Engineer in charge. (Note:-M.S. angle supports will be measured separately).

100 x 50 x 2mm thick cable tray with 1.6mm thick cover.

200 x 50 x 2mm thick cable tray with 1.6mm thick cover.

Earthing

Supply, providing and Fixing Cast Iron Pipe earth station confirming to IS 3043 complete with 2750mm long, 100 mm Inner Dia(ID),13mm thickness CI Pipe, with 2 part clamp made out of G I flat 50 x 6 mm continuously welded around the pipe using cast iron welding electrodes as per drawing. The cost also incudes excavation for earth pit, providing & laying homogenous mixture of charcoal lumps, salt & sand all around the pipe as per specification, supplying and fixing of RCC Collar of size 450 mm dia, 450 mm height and 50 mm thick over Cement concrete base of minimum size 150mm width & 100mm thick all around below collar shall be provided using 1:2:6 CC after necessary excavation, refilling of soil, consolidating, ramming, leveling of soil etc., supplying & fixing the label board(MS Plate of size 300mmx200mmX2mm) welding to the electrode complete as per specification, std drawing, instructions of EIC.

Supply, fixing & connecting the 50X6mm size G.I strip on wall / clamping to the existing duct wall / fixing on steel structures/ laying 2 ft. below the ground level with necessary excavation, concrete cutting & re-concreting, refilling, consolidation & levelling .of soil after laying for interconnection between the earth pits and the LT & HT panels earthing & Transformer body earthing as directed by Engineer-in-charge. Note:- Excavation, concrete cutting & re concreting will be measured separately

Supplying & laying 25 mm X 5 mm GI strip at 0.50 metre below ground/on tray as strip earth electrode, including connection/ terminating with G.I nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50mm)

Design, Fabrication, Supply and fixing/grouting/welding on wall/ceiling/ truss of suitable size MS angle iron supports/ flat/ brackets for cable tray supports, as per site requirement and painting the same with two coats of synthetic enamel paint over a coat of zinc chromite primer complete in all respects and as directed by EIC/OIC.

Data Items (Approved Makes: COMMSCOPE TYCO/ PANDUIT/ MOLEX)

Supplying Installation Testing and Commissioning of 24 port Cat6 Patch Panel loaded. Must be of 1U height with clear label holders and white label with the panel.24 Ports Cat-6 Patch Panel should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required.

Supplying, drawing, Installation, Testing and commissioning of 2Runs of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating Temperature Range : -5° to +60°C, Bending Radius :< 4 X Cable Diameter at –5°C ± 1°C and Pulling Force : 11.5Kg etc. complete as required.

Supply, Fixing in flush with wall/on Aluminium partition as per site condition, testing & Commissioning of 2 nos of RJ-45 modular type sockets for Data points including supply of suitable size modular MS/PVC surface mounting box with base plates, glossy finish front covers, labelling etc., with necessary interconnections and chipping the wall, replastering to smooth finish etc., wherever required complete as directed by Engineer-in-charge. As per CPWD Specification. Approved Make: COMMSCOPE TYCO/ PANDUIT/ MOLEX/Legrand/ Schneider/ HAL approved makes

Supplying, Installation, Testing and commissioning of 1 mtr length CAT6 Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required. As per CPWD Specification.

Supplying, Installation, Testing and commissioning of 3mtr length CAT6 Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required. As per CPWD Specification.

Voice Items

Supply & fixing on wall/grouted to floor upto 1200mm above ground level as per site requirement using suitable size MS angle iron frame work finished with two coats of enamel spray paint over a good primer & providing 10 pair krone type telephone connector junction box including krone connector/s with necessary mounting frame housed in suitable size FRP box with hinged lockable cover complete in all respects.

Supply, laying in the already excavated cable trench/existing duct/fixing on wall/cable tray/iron structure using suitable clamps etc./ encasing in pipe, testing and commissioning of 10 pair jelly filled armoured copper conductor of 0.5mm dia polyethylene insulated cover, twisted into pairs, colour coded, pairs laid up, fully filled with petroleum jelly as a moisture barrier, core wrapped with non-hygroscopic polyester tape to contain the jelly, covered with aluminium poly-laminates screen, polyethylene sheath extruded over aluminium screen, polyethylene tape over the above sheath, armoured with galvanised steel tape and outer polyethylene sheath underground telecommunication cable including both end terminations on the existing krone type junction box complete in all respects.

Supplying and drawing 4pair 0.5 mm dia FRLS/HFFR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supply, Fixing, in flush with wall/on Aluminium partition as per site condition, suitable size modular MS box with base plate, glossy front cover for supply and housing of 1 No. of RJ-11 telephone socket outlets with necessary interconnections, chipping the wall and replastering to smooth finish complete in all respects and as directed by Engineer-in-charge. As per CPWD Specification.

Displays

Supply, installation, testing and commissioning of 65" display with Brightness(Typ.) : 400 nits;Resolution : ULTRA HD (3,840 x 2,160);Improved Design with Slim Depth;webOS-based High Performance including suitable length HDMI cables as required. Make & Model may be LG -65UR640S or equivalent in other approved makes(LG/ Samsung / sony)

Supply, installation, testing and commissioning of 75" display with Brightness(Typ.) : 330 nits;Resolution : ULTRA HD (3,840 x 2,160);Improved Design with Slim Depth;webOS-based High Performance including suitable length HDMI cables as required. Make & Model may be LG -75UR640S or equivalent in other approved makes(LG/ Samsung / sony)

Dismantling, Removal of existing items Dismantling/Disconnecting/removal/re-laying/ rerouting/shifting/ re-erection of the following items as-is-basis not withstanding to below details without any damages shifting and handing over the same to the place as shown by Engineer-in-charge/Plant Maintenance department within Helicopter Division/NFTC area (not exceeding 2Km) complete as in all respects as per site conditions and as directed by the engineer-in-charge.

INTELLIGENT FIRE ALARM SYSTEM

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.

Supply and installation of PVC type response indicators with LED indications for above false ceiling detectors and shall comply to BS-5839/EN54/IS2189 standards for installation and product shall be UL / FM / Vds approved.

Supplying, installation, testing & commissioning of fault isolator complete with base as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as required

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Supply, installation, testing and commissioining of 16HP Modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling/heating having 100%Hermetically sealed inverter type twin Rotary/Scroll Compressor(s), microprocessor based Controller, top discharge type condensing Unit, with R-410-A Refrigerant or equivalent, vibration Isolators with Suitable foundation etc. complete as required. To have better efficiency Condenser fan shall be capable to operate at different speed with respect to Load. The unit shall deliver the rated capacity and in confirmation as per IS18728:2024 and CPWD Specifications and work even at 50°C ambientTemperature without tripping. The system shall be able to deliver 100% ofThe rated capacity up to 39 Degree Celsius. The unit shall be suitable to workon 400V +/- 10%, 3 Phase, 50Hz AC power supply and BMS compatible. The unit shall be filled with first charge of the refrigerant and ready for use asrequired. The condenser should be coated with a hydrophilic film to prevent water accumulation on the surface of the heat exchanger, enhance water dispersion, and reduce the risk of degradation, thereby improving overallperformance and durability. The Indian Seasonal Energy Efficiency Ratio(ISEER) of the unit shall be as per Energy Conservation and Sustainable Building Code (ECSBC) 2024 as below and complete as per CPWDspecification, connections, inter connections etc. as required.For capacity<40 kwr ISEER 7.4, Capacity > 40 and <70 ISEER 7.5, Capacity > 70 ISEER 7.6 for super ECSBC Building). Make: Diakin/Any other HAL make which meets to BOQ.

Supplying, Installation, Testing and Commissioning of following minimum capacity 4 way Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet,drain pump, grill, necessary supports, vibration Isolation, Corded remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The Indoor units must shut down upon receiving a singal from the BMS System/Fire Singnals. The system shall be capable to adjust air flow as per room requirement in auto mode. The cooling capacity of indoor unit will be at air inlet conditions of 27 0C DB and 19 0C WB temperature. (Make will be same as of Outdoor)

Design, Supply, installation, testing and commissioning of suitable size hard/soft refrigerant copper pipe as required with required pipe fittings, accesories, filter drier and couplings by good quality pipe joints which laid between ODU and IDU The Minimum copper pipe gauge shall be as per the gauges indicated by manufacturer. The Pipe sizes to be used as per OEM design recommendation. The Refrigerant pipe shall be insulated with Class O nitirle rubber of 19 mm thick for Gas line and 19 mm thick for liquid line. The piping shall be laid on walls / roof / ceiling well supported at specific intervals with metallic support, Cable tray with cover and required hardwares etc., for fixing copper pipes. All the necessary accessories, jointing / brazing etc shall be carried out as required. The pressure testing of refrigerant piping has to be done as per manufacturer design recommendation. All the copper fittings shall be suitable for R 410 A/R 407R 134a//R-32 refrigerant. Make: Mandev/Piyush/Totaline (Note: 1. Irrespective of diameter both gas and liquid piping shall be measured as a single item. The single item measurement comprising of gas line, liquid line, insulation and its accessories. Contractor make a note of it and quote accordingly. 2. Before commencement of work, shop drawing to be submitted to OIC/EIC for approval.)

Design,supply,Installation testing & commissioning of suitable sizes as per OEM recommonadation not less than 2mm thick CPVC drain water ,reducer, bends, collars & elbow etc, all complete and duly insulated with 9 mm thick tubular insulation of closed cell elastomeric nitrile rubber as required.The PVC drain water pipe shall be complete with fittings, accessories and duly insulated using bends, elbows, tees, wall sleeves, hangers, supports, anchors etc.(Note:. Necessary wall openings and closing the same using cement mortar and matching paint finish after taking out pipes is included in the scope of work.)