REPAIR TO ROOF FLOORING AND CEILING WORK AND REPAIR OF PLASTERING, JOINERY, SANITARY FITTING, WALL PENALLING AND MISC WORKS INCL PERIODICAL SERVICES TO CERTAIN OTM ACCN AT PEDONG, AP ALGARAH, ALGARAH DALAPCHAND AND TEESTA TCP UNDER GE 867 EWS

Amount

Demolition for ashlar facings, dressed stonework, precast concrete articles and precast concrete block wallingbuilt in cement mortar or cement lime mortar, complete all as specified and as directed.

M & L precast cement concrete (1:3:6) type C-1 , (using 20mm graded crushed stone aggregate) block masonry with solid blocks exc 10cm in width and setting in CM (1:6), complete all as specified and as directed.

M&L 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:6), complete all as specified and as directed.

M & L 15 mm thick rendering on other than fair faces of brick work concrete surface in CM (1:4) with water proofing compound, complete all as specified and as directed. Note : WPC will be measured and paid separately.

M & L 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:6) including taking down cement plaster of any description from stone/ PCC blocks taking down cement plaster of any description from stone/PCC block/brick walls incl raking out joints hacking for key, scrubing down with water etc, complete all as specified and as directed.

M & L 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:4) including taking down cement plaster of any description from stone/ PCC blocksTaking down cement plaster of any description from stone/PCC block/brick walls incl raking out joints hacking for key, scrubing down with water etc, complete all as specified and as directed. Note - WPC will be measured and paid separately.

Preparing newly plastered surfaces of wall and applying two coat of oil bound distemper over chalk whitining primer over 3mm thick layer of putty, complete all as specified and as directed.

M&L for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat or alkali resistan primer, complete all as specified and as directed.

Supply only integral water proofing compound, complete all as specified and as directed.

M&L three coats of white wash on newly plastered surfaces including preparation of surfaces, complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections incl cleaning for re fixing or removal to store, complete all as specified and as directed.

Refixing old steel tubing of 15 mm dia and connections in new or old position (Walls, ceiling, floors, etc), complete all as specified and as directed.

S&F 15mm bore tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

S & F in repair bib taps 15mm bore cast copper alloy chromonium plated with crutch or butterfly, handle, screwed down, screwed for iron pipe, complete all as specified and as directed.

S & F in repairs pillar taps cast copper alloy chrominium plated with capstan heads, chromium plated, screwed down high pressure with or without lettered "Hot or Cold" with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and as directed.

S & F in repair 15mm dia two way angle valve cast copper alloy chromonium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, complete all as specified and as directed.

S & F in repair PVC connection pipe 15mm size with PTMT nuts of 600 length, complete all as specified and as directed.

S & F in repair vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), complete all as specified and as directed.

S & F in repair vitreous china, wash down water closet pedestal pattern, complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement morter bedding (but not backing) removing serviceable tiles to store & rubbish of the premises, complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6), complete all as specified and as directed.

M & L glazed ceramic coloured tiles (300 x 200mm) x 7mm thick on vertical surfaces such as skirting , dados & risers to steps set & Jointed in neat cement slurry & pointed in colored cement to match over and including 10 mm thick rendering in CM (1:4), complete all as specified and as directed.

M&L for non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in cement mortar (1:6), complete all as specified and as directed.

M&L for non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces such as dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 10 mm thick backing coat in cement mortar (1:4), complete all as specified and as directed.

M&L for vitrified ceramic tiles 10 mm thick (square/ rectangular) non skid ceramic coloured tiles light shade 7 to 8 mm thick (square/rectangular) polished, area of each tile exceeding 0.36 sqm, set in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6), complete all as specified and as directed.

All as per item No. 25 here in before but on vertical surfaces over and including 10 mm thick screed bed in CM (1:4), complete all as specified and as directed.

S & F in repair PVC valveless syphonic action type flushing cistern,10 ltr capacity, low level, white with inlet, ball valve float and handle including brackets and connection to pipes, complete all as specified and as directed.

S & F in repair Vitreous china WHB 550 x 400 mm white flat back including bracked, complete all as specified and as directed.

S & F in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in CM (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe, complete all as specified and as directed. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe

M&L for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

M&L for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

M&L 75mm PVC (SWR) bends, complete all as specified and as directed.

M&L 110mm PVC (SWR) bends, complete all as specified and as directed.

S&F in repair cromium plated health faucet, fancy type, Abs SS braided hose 1.25m with IV hook, fixed, complete all as specified and as directed.

Taking down chowkats frames but with shutters (with out taking off shutter from the frames) exc 1.5 sqm but not exc 4.00 sqm each, complete all as specified and as directed.

Taking down chowkats frames but with shutters (with out taking off shutter from the frames) n.exc 1.5 sqm each, complete all as specified and as directed.

Taking down shutters of any description area exc 01 Sqm but not exc 2 Sqm each leaf, complete all as specified and as directed.

Taking down shutters of any description area n.exc 1 sqm of each leaf, complete all as specified and as directed.

S & F 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S & F Pressed steel frame of size 105 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock strike plate, etc, complete all as specified and as directed.

S&F 30 mm thick flush shutters solid core construction with block board core and ply wood face panel commercial type on both sides, complete all as specified and as directed.

S&F anodised aluminium frame for door windows ventilators with one or more revets including joining clea for fixing etc, complete all as specified and as directed.

S&F anodised aluminium door shutters aluminium section weighing 0.55 kg/mtr including necessary joining cleats glazing clips rubber neoprene packing handles 3 Nos in each doors hinges anodised aluminium snapbeading screws etc, complete all as specified and as directed.

S & F mild steel work as in hold fast & similars articles confirming to Fe 310-0 or Fe 410 - 0, complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47 mm, made out of 5mm plain colour PVC sheet, reinforced with MS square tube supplying and fixing in openings, complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification, complete all as specified and as directed.

S & F 2nd class hard wood plain framed paneled shutter 30mm thick (any numbers of panel) with panel of timbers flat on both sides & fitted to chowkats, complete all as specified and as directed.

S & F 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a), complete all as specified and as directed.

S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed.

S & F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed.

S & F steel window with side hung shutter, including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and as directed.

M&L for Mild steel work as in guard bards for window frames confirming to Fe-290 Gde E-165, complete all as specified and as directed.

S & F butt hinges medium weight cold rolled mild steel and fixed to chowkats 100 mm size, complete all as specified and as directed.

S & F in repair butt hinges medium weight cold rolled mild steel and fixed to chowkats 100 mm size, complete all as specified and as directed.

S & F 150mm size aluminium handle cast type anodised, complete all as specified and as directed.

S & F in repair 150mm size aluminium handle cast type anodised, complete all as specified and as directed.

S & F 250 mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type ) and fixing clip of sheet cost or extruded section or cost aluminium alloy & fixed, complete all as specified and as directed.

S & F in repair 250 mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type ) and fixing clip of sheet cost or extruded section or cost aluminium alloy & fixed, complete all as specified and as directed.

S & F 150mm long aluminium anodised barrel tower bolts of extruded sections, complete all as specified and as directed.

Hacking out old brocken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beeds, complete all as specified and as directed.

S & F 3.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane, complete all as specified and as directed.

S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, complete all as specified and as directed.

S & F 4.0 mm thick sheet glass ordinary quality and glazing with oil putty/ pvc bedding in square exc 0.50 Sqm in each pane, complete all as specified and as directed.

S&F in repairs Drapery curtain rod dia 18-19 mm dia powder coated in colour with fixing brackets, stops rollers etc, complete all as specified and as directed.

M&L preparation of newly wooden surfaces of any description exc 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over one coat of pink primer, complete all as specified and as directed.

M&L for preparation of new or previously untreated steel and iron surfaces of any description and in any position over 10 cm width or girth as in roof/ wall not other wise specially described and applying two coat of synthetic enamel paint (Corrugal) over a coat of red oxide zinc chromcomplete all as specified and as directed, complete all as specified and as directed.

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets, complete all as specified and as directed.

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame, complete all as specified and as directed.

Dismantling of plain or corrugated sheeting, complete all as specified and as directed.

S & F 0.63mm thick galvanished corrugated mild steel sheeting class -V with two corrugation side lap fixed with with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 in roof, walls etc, complete all as specified and as directed.

S & F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with seif tapping screws, complete all as specified and as directed.

S & F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.45mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with seif tapping screws, complete all as specified and as directed.

S & F Plain, galvanized, mild steel sheeting 0.63 mm thick is ridges, hips valley gutters drips and straight flashing (length & girth as fixed) in class V, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

S&F Roof trusses (framed) trssed, purlin, crane gantries, rail and fastenings and heavey brackets framing (Beam, tee, angle, channels of flat sections) including distance pieces, cleates etc confirming to Fe 410W(Gde E-250 quality A), complete all as specified and as directed.

S & F framed work such as grills framed guard bars etc confirming to Ge 290 , 10 mm sq bar for guard bars, complete all as specified and as directed.

S&F in repair 1mm thick Mild steel sheet/ PVC eaves gutters, 125mm dia, galvanised class 3, half round with rounded edges, complete all as specified and as directed.

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets, complete all as specified and as directed.

S&F 4mm thick ply wood 3 nos of ply grade BWR, type BB fixed with nails to timber frame, complete all as specified and as directed.

S&F 6mm thick ply wood 5 nos of ply grade BWR, type BB fixed with nails to timber frame, complete all as specified and as directed.

S&F 605 X605 mm GI frame work for for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sorrounding wall using nylon sleeves and screws at 450 mm centre to centre /intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from suffit at approx 900 mm centre to centre with GI cleats and steel expansion fastner with and including ceiling section (not exc 1.2 m length)of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10 .5 mm fixed to the intermediate channel with connecting clieats across the intermediate channel at 457 mm centre to centre, complete all as specified and as directed.

S&F PVC 10 mm thick insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling/wall grid made of aluminium /G.I/M.S as per specification and drawing, complete all as specified and as directed.

S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5mm dia 40mm long, complete all as specified and as directed.

M&L 4mm thick asbestos cement plain building boards, fixed or laid /inserted to GI snap grid framework with screw in ceilings, complete all as specified and as directed.

M&L three coats of white wash on ceiling on AC boards, complete all as specified and as directed.

S&F 2nd class hard wood plain fillets sectional area exc 6 but n.exc 13 sqcm square , rectangular or triangular in section screwed with nails or bards, complete all as specified and as directed.

M&L preparation of newly wooden surfaces of any description exc 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over one coat of pink primer, complete all as specified and as directed.

M&L preparation of newly wooden surfaces of any description n.exc 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over one coat of pink primer, complete all as specified and as directed.

Dismantling of timber in scantling 40 sqcm and over in section in any position in unframed work, complete all as specified and as directed.

M & L 2nd class hard wood in scantling fixed in clean sawn, complete all as specified and as directed.

All as per item no 91 here in before but except timber, complete all as specified and as directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/Rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc, set and jointed in neat cement slurry and pointed with coloured cement to match over and incl 15mm thick screed bed in CM (1:6) in flooring, complete all as specified and as directed.

M&L Granite (of any type) work 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in including and over 20mm thick screed bed CM (1:6) and pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite, complete all as specified and as directed.

M & L machine cut kota stone slab flooring 20-25 mm thich over cement screed base includind 15 mm thick sreed bed or bedding layer of CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match tis shade of the slab including rubbing and polishing, complete all as specified and as directed.

M & L machine cut kota stone slab flooring 20-25 mm thich in riser of steps, skirting, dado and pillar over cement screed base includind 10 mm thick sreed bed or bedding layer of CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match tis shade of the slab including rubbing and polishing, complete all as specified and as directed.

Demolition of cement concrete(Unreinforced) in ground floors and pavings n.exc15cm thickness (below or above ground level), complete all as specified and as directed.

M&L for PCC (1:4:8) type D-2 (using 40mm garded crushed stone aggregate) 75 mm thick as in sub base to floors, complete all as specified and as directed.

M&L40mm thick Plain cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in floors finished even and smooth using extra cement, complete all as specified and as directed.

M&L 38mm wide glass dividing strips 3mm thick as in floors, complete all as specified and as directed.

M & L 75mm thick PCC (1:3:6) type C-2 (40mm graded crushed stone aggregate) in plinth protection , path/steps etc, complete all as specified and as directed.

M&L for preparation of old painted steel and iron surfaces of any description and in any position over 10 cm width or girth as in roof not other wise specially described and applying one coat of synthetic enamel paint (Corrugal) complete all as specified and as directed.

M&L for preparation of old painted steel and iron surfaces of any description and in any position over 10 cm width or girth (Other than roof) not other wise specially described and applying two coat of synthetic enamel paint (Corrugal) complete all as specified and as directed.

M&L for preparation of old painted steel and iron surfaces of any description and in any position over 10 cm width or girth (Other than roof) not other wise specially described and applying one coat of synthetic enamel paint, complete all as specified and as directed.

M&L for preparation of old wood and wood based material surfaces, of any description and girth, not other wise described and treated with one coats of creosote oil complete all as specified and as directed.

M&L for preparation of old wooden surfaces of any description and applying one coats of synthetic enamel paint over 10cm width or girth complete all as specified and as directed.

M&L for complete removal of exisiting treatment on old plastered surfaces of walls and applying two coats of cement base paint over a coat alkali-resistant priming paint complete all as specified and as directed.

M&L for preparation of old surfaces of walls and applying one coat of coat of cement base paint complete all as specified and as directed.

M&L for preparation of old surfaces of walls and applying two coat of oil bond distemper complete all as specified and as directed.

M&L for preparation of old surfaces of ceiling and applying one coat of oil bond distemper complete all as specified and as directed.

M&L for preparation of old surfaces of walls and applying one coat of white wash complete all as specified and as directed.

M&L preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.

DEEP CHANDRA JOSHI (BID ID -3139598)

ANTHONY PRADHAN (BID ID -3139585)

RAMESH GURUNG (BID ID -3139590)

MS BRAHMA CONSTRUCTION (BID ID -3139636)

G K SUTHAR (BID ID -3139628)

HEM RAJ GURUNG (BID ID -3139620)

M/S JAYSHREE CONCERN (BID ID -3139618)