Repair/Maint of electrical wiring and replacement of unserviceable conventional fittings/fixtures with LED fitting fixture at Married Accn at Site C area, MES domestic and Office area, 3 AFSR, 11 ASC and NKP area under GE (AF) Borjhar

Amount

Taking down carefully aluminum/copper point wiring (light, fan socket or power) complete including fittings & fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of walls, floors etc complete all as required and keeping serviceable light fittings in safe custody for reuse in the work as directed.

Taking down existing sub main wiring of any type/size complete from wall and making good the disturbed surface complete.

M & L for point wiring with two single core 1.5 Sqmm FRLS PVC insulated unsheathed 1100 Volts grade multi stranded copper conductor with one single core 1.50 Sqmm FRLS PVC insulated unsheathed solid copper conductor as earth continuity conductor drawn through in and including PVC casing caping (ISI Marked) of required size along with all fitting/ fixtures such as Tee, Bend, Elbow socket, Saddles etc. and making good the disturbed surface and connecting to common earth dolly complete with 1.6mm thick sunk in pressed steel terminal box of suitable size / shape for accommodating switches sockets, regulators with brass screws,washers with hylem sheet of 3mm thick in white / smoke gray/ off white colour for One light/fan point controlled by one No. one way 5 Amp switch complete. Note:- Colour of cables as Phase-Red, Neutral-Black and Earth-Green.

All as per item No 3.00 above but one call bell point controlled by one push button switch.

All as per item No 3.00 above but one 5 Amps 5 pin switch socket combination on independent board.

All as per item No 3.00 above but one light point controlled by two Nos two way switch.

All as per item No 3.00 above butone 5 Amps 5 pin switch socket point on same board controlled by one piano switch.

All as per item No 3.00 here-in-before but point wiring for one 3 pin 15 Amps socket point on independent board with 2.5 Sqmm size FRLS PVC insulated, unsheathed, multi stranded, copper conductor cables 1100 volt grade and with 2.5 Sqmm FRLS PVC insulated unsheathed, single core, multistranded copper conductor cable 1100 volt grade as earth wire complete.

S&F for Sub main wiring two single core PVC insulated unsheathed FRLS multistranded copper conductor cable of size 6.0 Sqmm (Nominal area), 1100 V grade and one run of 6.0 Sqmm 1100 V grade FRLS PVC insulated unsheathed muti stranded copper conductor cable as in earth continuity conductor drwan through in and including PVC Casing-in-Caping of required size (ISI marked) with all accessories on roof/wall/ceiling and making good the disturbed surace with cement sand plaster (1:6) and white washing/distempering to match the existing surface complete . Note:- Two runs of 6.0 Sqmm cable and one run of 6.0 Sqmm earth wire and one run of PVC casing-in-caping shall be measured as one unit length.

All as per Item No 9.00 here in before but sub main wiring with two run multi standard FRLS PVC insulated unsheathed copper stranded conductor of size 4 Sqmm and one run of size 4 Sqmm for continuous earthing.

S&F switch piano flush type 5 Amp single pole, one way, complete.

All as per item No. 11 above but fixed in repairs.

S&F switch piano flush type, 5 Amps, Single pole, two way, complete.

S&F for ceiling rose surface bakelite 65 x 50 mm three terminal, complete.

S&F lamp holder insulated body with back plate for batten fittings including necessary connection, complete.

S&F switch socket combination, two in one, 5 pin 5 Amp flush type, complete.

All as per item No. 16 above but fixed in repairs.

S&F switch socket combination multipurpose 5 pin 15 Amp flush type, universal, complete.

All as per item No. 18 above but fixed in repairs.

S&F socket outlet 5 pin 5 Amps, flush type, complete.

All as per item No. 20 above but fixed in repairs.

S&F Bell/buzzer AC 230 volts, single pole complete.

S&F Bell multi music type complete.

S&F switch push button flush type, 5 Amps, single pole, one way, complete.

S&F stepped type electronic fan regulator, resistance type, complete.

M&L for replaced to unserviceable capacitor 2.5/3.15 mfd in lieu of provided with new capacitor oil type 2.5/3.15 mfd suitable for 240 volt AC complete.

Supply only Insulation Tape roll Complete.

S&F Modular switch 1 way 6 Amps 1 module complete

S&F Modular switch 16 A 240 Volts 1 way 1 module complete.

S&F Module socket 6 Amps 2/3 combined 240 Volts 2 module complete.

S&F Modular socket 6A/16 Amps 2/3 combined 240 Volts 2 moudle complete.

S&F fan regulator, step type,120 W 2 module complete. Note for Item No.12 to 19 :- Modular sunken boxes with cover plate shall be measured and paid separately under respetive items.

S&F Modular metal flush box 1 or 2 module complete.

S&F Modular metal flush box 3 module complete.

S&F Modular metal flush box 6 module complete.

S&F Modular metal flush box 8 module complete.

S&F white cover frame with frame 1 or 2 module complete.

S&F white cover frame with frame 3 module complete.

S&F white cover frame with frame 6 moudle complete.

S&F white cover frame with frame 8 moudle complete.

Taking down unserviceable rusted/damaged sheet metal enclosure DBs of any size/type/ways from wall carefully and making good to disturbed surface of wall complete.

S&F powder coated sheet metal enclosures MCB DB SPN 2 way 240 Volt complete.

S&F powder coated sheet metal enclosures MCB DB TPN 4 way double door, made out of CRCA mild steel surface with insulated material like polyster with epoxy surface stove enameled dust and vermin proof 4 way 415 Volt fitted with bus bar, DIN channel, neutral link suitable for incorporation of MCB's and isolator etc, complete .

All as per item No.43 above but DB SPN 8 Way.

All as per item No.43 above but DB SPN 4 Way.

All as per item No.43 above but DB SPN 12 Way.

All as per item No.43 above but DB SPN 16 Way.

S&F MCB SP 6 to 32 Amps breaking capacity 10 KA 240 volts, 'C' series, complete.

S&F MCB SPN 6 to 32 Amps breaking capacity 10 kA 240 volts, 'C' series, complete.

S&F MCB SPN 40 to 63 Amps breaking capacity 10 KA 240 volts, 'C' series, complete.

S&F MCB TPN 6 to 32 Amps breaking capacity 10 KA 240 volts, 'C' series, complete.

Taking down unserviceable tube light fitting / CFL light fitting 1x40/36/20/ 18/11watt and bulkhead fitting/building security light complete all as directed.

S&F surface mounting batten tube light fitting, integrated polycarbonate LED channel with white acrylic cover complete suitable for and including lamp LED 1x18 Watt, fixed properly on wall surface and connecting complete from ceilling rose to fitting by three core copper conductor cable of overall sheathed size 2.5 Sqmm which shall be passed through PVC flexible conduit complete. Make:- Surya Cat Part No.SLE BT 18W ARROW or equivallent approved make as mentioned in PS

All as per item No.53 above but fixed in repairs.

S&F surface mounting batten tube light fitting, integrated polycarbonate LED channel with white acrylic cover complete suitable for and including lamp LED 1x9 Watt, fixed properly on wall surface and connecting complete from ceilling rose to fitting by three core copper conductor cable of overall sheathed size 2.5 Sqmm which shall be passed through PVC flexible conduit complete. Make:- Surya Cat Part No.SLE BT 9W ARROW or equivallent approved make as mentioned in PS

All as per item No.55 above but fixed in repairs.

S&F Reccess mounting LED 8W downlighter,240 V, 50 HZ , with all accessories complete. Makee:- Bajaj Cat Part No. BGSLO Sleek 8W WH SQ LED or its equivalent.

S&F LED bulkhead light fitting suitable for and including lamp LED 1x10 watt, fixed / connect properly at directed location complete. Make-Surya Cat Part No.SLE BLH 10W /or equivallent approved make as mentioned in PS

S&F building security light LED fitting with pressure die cast housing, epoxy powder coated dark graphite grey colour finish and prismatic polycarbonate cover with individual LED lences suitable for including lamp LED 20 watt, fixed / connect properly at directed location on building complete all as specified and directed. Make-Surya Cat Part No.SLE UL 20W IP65 LXN or equivallent approved make as mentioned in PS

S&F bracket for bldg security light fittings of any size made out of GI pipe medium grade 32 mm dia 1.25 mtr length bend to required size and shape including provision of MS clamps, nuts, bolts etc fixed properly at directed location and two coat of aluminum paint over a coat of red oxide primer including taking down old u/s bracket complete.

M&L for PVC rectangular block with 3mm thick plastic laminated sheet cover of size 350x300 x50mm depth fixed properly and to fix/connect the old serviceable switches, sockets, fan regulators etc complete.

All as per item No.62 above but size 175x100x50mm

Taking down unserviceable service wire of any size any type all as directed.

Supply only 1100 volts grade heavy duty cable PVC insulated Stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire, one twin core cable flat or circular of 10 Sqmm, complete.

All as per item No.64 above but 16 Sqmm.

Supply only PVC Casing-in-Caping of size 20/25mm, ISI marked including all fittings and fixing accessories fixed to wall/ceiling for sub main wiring complete all as specified and directed.

M&L for sub main wiring with 2 x 2.5 Sqmm PVC insulated single core unsheathed stranded copper conductor drawn in and including PVC casing capping including continuous running earth wire by 2.5 Sqmm PVC insulated unsheathed single core stranded copper conductor 1100 volts grade connected to common earth dolly including plastic terminal boxes complete all as specified and directed. Note:- Two runs of 2.5 Sqmm cable and one run of 2.5 Sqmm earth wire and one run of PVC casing-in-caping shall be measured as one unit length.

All as per item No 67.00 above but main wire 2 x 1.5 Sqmm & earth wire 1 x 1.5sqmm. Note:- Two runs of 1.5Sqmm cable and one run of 1.5 Sqmm earth wire and one run of PVC casing-in-caping shall be measured as one unit length.

M&L for building earthing complete with galvanised steel earth plate electrode 60 x 60x 6mm burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edged of the plate not less than 1.5 mtr below normal ground level, connected to galavanised iron earth lead by means of bolt, nut, check nut and washer of galavanised iron steel wire 4mm dia as earthing lead as shown in Electrical Plate No 3 of SSR Part I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/ loose soil, earth pit in PCC 1:3:6 type C1 using 20mm stone aggreate, funnel, 20mm dia GI medium grade water pipe, 15mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs, wire mesh, charcoal or coke and common salt in alterative layer all around the earth electrode compacted thickness 15 cm including excavation and earth work pit cover including disposal of surplus soil to a distance not excessding 50m, complete testing on completion all complete as shown in electrical plate No 3 of SSR Part I 2009 all as directed.

M/s Beekey Seekey Traders

M/s Rawat Enterprises

M/S DIL SINGH BISWA AND CO

M/S RUPDEEP ENTERPRISES

Arpara Trade Agency