Development of Koti Kuteshwar Tirath in village Keorak at Distt. Kaithal (Pdg. Post top lantern on Prikarma Path and E.I. in shade of ladies ghat and toilet block only)

Amount

31.9 (i) d Supply and erection of PVC copper insulated and sheathed 2-core circular flexible wire. Size 1.50 sqmm ( 48 / 0.20mm).

31.17a) (ii) Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. SP MCB of 9 KA breaking capacity 6 amp. to 32 amp.

31.17(a) (ii) SPN MCB of 9 KA breaking capacity 6 amp. To 32 amp.

31.18 (xi) Bakelite angle / straight button holder large size.

31.18 (xii) Switch 5 amp. On existing sheet.

31.18 (xiii) Wall socket 5 amp. On existing sheet.

31.18 (xiv) 15 amp. Switch on existing sheet .

31.18 (xv) 3 pin 15 amp. Multi socket on existing sheet.

31.18 (xviii) Bakelite sheet including fixing with brass screws and washers. 5 mm thick .

Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. 31.21 (xiii) Galvanised iron pipe 50 mm dia on flushed.

31.22(i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

31.22(ii) Extra for using salt and charcoal / coke for pipe earth electrode as required.

31.22(xix) Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. stapples of same size.

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 10 Sq. mm 2 Core Cable . 31.26 (iv) Ard.

10 Sq. mm 4 Core Cable . 31.26 (xxxix) Ard.

Supply and erection of suitable compression type brass cable glands for underground Cable. 31.28 (ii) 10 Sqmm to 16 Sqmm Cable 2 to 4 Core .

31.40 Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe . Size 1.5 sqmm

Size 2.5 sqmm

Size 4 sqmm

31.41 Supply and erection of Double door sheet steel enclosure distribution boards suitable for MCB's & ELCB's recessed in wall including bonding to earth complete with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4-way , TP&N ( Horizontal) (8+12)

31.44 Supply and erection of PVC pipe ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work. 25 mm dia.

31.48 Supply and erection of MS Saddle and clamps duly galvanised , on wall / RCC parapit for fixing underground cable at a distance of 0.60 metre center to center fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect and upto entire satisfaction of the Engineer-in-charge of work.

31.67 S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 mtr. below ground level including diging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-incharge of the work HDPE pipe 63 / 50mm outer dia / inner dia.

NS items S/E/T/C of 90 watt LED Flood Light Luminiaries with pressure fie cast aluminium housing with lens and accessories required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer-in-charge of the work. Make as per approved list attached

S/E/T/C of 40 watt LED Projector light make Twinkle Model No. LuxMax-PRJ-J-40 or equivalent model of Mayfair, Vak, Glowmac complete the job in all respect upto the entire satisfaction of Engineer-in-charge of the work.(N.S)

Supply and erection of Post Top Lantern fitting similar to Glowmac (GL-PT-Astor40W LED), VAK (Floret 40W) or equivalent Twinkle Lite, Mayfair, Twinkle Lux made with Corrosion resistant die cast aluminum. Rubber gaskets at appropriate location for dust and water protection, Aluminum hat for reflection of light. Suitable for 3-5 Mtr. height with Diffuser of unbreakable PC material. Complete fitting should be pure polyester based powder coated with high corrosion resistance and chemical chromatised protection with multiple coats of weather resistant Polyurethane pain in various colors complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work.

Supply and erection of 3Mtr. Steel Pole made out of GI section with die cast aluminium embelishment complete with RCC foundation 1:1.5::3 of size 400mm x 400mm x 1000mm with minimum four longitudenal iron bars of size 12mm tied with the suitable ring with spacing 200mm center to center also including suitable foundation bolts. The pole will have diameter 60mm at top and 114mm at bottom & base made of die cast MS with holes suitable for 16mm foundation. Pole should be pure polyester based powder coated with High Corrision resistance and chemical chromatised protection, with multiple coats of weather resistant polyurethane paint with the service window at the lower part of the pole contains connector, cut-outs, MCB complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work Make Glowmac (GL-PL-Flox) or equivalent Twinkle Lite, VAK , Mayfair, Twinkle Lux

Som Nath Contractor