Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹4.0 Cr
EMD Value
₹4.0 L
Closing Date
23 Feb 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Construction of Central Sterile Services Department (CSSD) under National Health Mission in the Dhenkanal district of Odisha (Scope of work in addition to above is uploaded separately along with this NIT)
NBCC/ODISHA/ZO/NHM/NIT/22-23/014
NBCC/ODISHA/ZO/NHM/NIT/22-23/014
Open Tender-Domestic
Civil Works General
Dhenkanal, Odisha
₹11,800
₹4.0 L
23 Feb 2023
8 Feb 2023
23 Feb 2023
23 Feb 2023
9 Mar 2023
Head Description of Item Unit Qnty. Rate Amount
Cleaning & grubbing road land including uprooting
rankvegetation,grass ,bushes, shurbes,sapling and trees girth
upto 300mm ,removal of stumps of trees cut earier and disposal
of unsevicable materials and stacking of servicable materials to
be used or auctioned up to lead of 1000 meters including
removal and disposal of top organic soil not exceeding 150mm
Earth work in all kind of soil within 50m. Initial lead and 1.5m
initial lift including rough dressing and breaking clods to
2 (i) maximum 5cm to 7cm and laying in layers not exceeding 0.3m in cum 285.12 246.50 70,282.65
depth and as per the direction of the Engineer-in-charge.
Extra lift of 1.5m or part there of over the initial lift of 1.5m in all
3 (ii) kinds of embankments and road works and ordinary earth work cum 95.04 268.92 25,558.35
Filling in foundation, trenches and plinth with river sand, well
watered and compacted in layers of 0.3 mtr, with top surface
dressed and leveled to proper gradient including cost of all
4 0 materials, conveyance, all taxes and royalties, loading and cum 501.58 475.19 2,38,343.32
unloading, including cost of all labour, sundries ,T & P etc. All
complete as per directions of the Engineer -in-charge.
Providing and laying of Cement Concrete of grade 1: 3 :6
(1cement : 3 sand : 6 graded stone aggregate 20 mm nominal
size ) of approved quality from quarry mixing in concrete mixer
,lowering and compacting in proper thickness , watering & curing
5 0 for the required period .including all cost of labour cum 68.58 5653.97 3,87,749.26
,material,conveyance,royalties and taxes ,sundries ,T & P etc. &
including the cost of centering and shuttering all complete as per
the directions of Engineer-in-charge.
Providing anti-termite treatment using approved quality of
chemical emulsion, spraying the mixture uniformly by sprayer as
preconstructional anti termite treatment and creating a chemical
barrier under and around the column pits, wall trenches, top
surface of plinth filling, junction of walls & floors along with
external perimeter of the building, expansion joints, surrounding
the pipes and conduits etc. complete at the rate as directed by
the manufacturer confirming to IS:6313 (Part-II) and as per
direction of Engineer-in-charge including cost of all materials,
6 0 labour, taxes, sundries, T&P etc. complete. (The payments shall sqm 495.72 118.00 58,494.96
be made on the basis of actual plinth area of the building at
Ground Floor & vertical faces will not be measured for payment.)
Note:- The Contractor shall have to furnish 10years Guarantee to
maintain the anti-termite treated area / structures free from
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
RCC work M-25 grade as per approved designs and drawings
having a minimum compressive strength (in work test) 25 N. /
Square mm. in 15 cm. cubes at 28 days after mixing and test
conducted in accordance with I.S. 456 and I.S. 516 using 12
mm. to 20 mm. size black hard crusher broken granite stone
chips and screened and washed sharp sand for mortar of
approved quality from approved quarry, washed and cleaned (20
mm. size chips not to exceed 25 % ) to be mixed in concrete
mixture with approved grade cement including hoisting, lowering,
laying and compacting concrete by using vibrators, watering and
7 0 curing for 28 days and finishing the exposed surface smooth 0 0.00 0.00 0.00
providing grooves or beads wherever necessary including cost,
conveyance, loading, unloading, royalties and taxes of all
materials and cost of all labours, sundries, T&P, required for the
work etc. complete including cost of centering & shuttering as
per direction of the Engineer in charge.
8 0 Foundation and plinth 0 0.00 0.00 0.00
Providing, fixing in position TMT Fe-500 reinforcement bars for
RCC work of required diameter of approved quality including
straightening, cutting, bending, binding, welding and joining (if
necessary) and tying the grills and placing in position as required
for R.C.C. work and providing hoisting, lowering and laying
including cost, conveyance and taxes of tor steel and binding
wires of 18 gauge and labour required for the work for bending,
35 0 binding and tying the grills in all heights as per the specification & 0 0.00 0.00 0.00
direction of Engineer -in-charge. (Linear measurements will be
taken & quantity will be calculated on standard weight. Weight of
binding wire will not be considered for measurement.)
36 0 Foundation and plinth qntl 184.66 10318.98 19,05,503.22
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing Fly ash bricks masonry work using
(250mmx120mmx80mm size) having crushing strength not
less than 75Kg/Sqcm in cement mortar (1:6). Immersing the
bricks in water before use in all necessary projection splays
cutting, circular moulding, corbelling etc. Including cost of
41 0 conveyance ,taxes & royalties, loading and unloading of all 0 0.00 0.00 0.00
materials & cost of all labour, scaffolding ,watering & curing
,sundries, T & P etc. complete as per the direction of Engineer-in-
Providing Fly ash bricks masonry work using
(250mmx120mmx80mm size) having crushing strength not
less than 75Kg/Sqcm in cement mortar (1:4). Immersing the
bricks in water before use in all necessary projection splays
cutting, circular moulding, corbelling etc. Including cost of
46 0 conveyance ,taxes & royalties, loading and unloading of all 0 0.00 0.00 0.00
materials & cost of all labour, scaffolding ,watering & curing
,sundries, T & P etc. complete as per the direction of Engineer-in-
Providing 16mm thick cement plaster to the surface of brick
masonry wall with cement mortar (1:6) including racking out
joints, scraping and cleaning the surface and finishing the plaster
surface smooth using wooden floats only to proper plumbs and
level and making grooves and beads to give required ornamental
50 0 finish as per drawings including cost of all materials, 0 0.00 0.00 0.00
conveyance, loading and unloading, all taxes and royalties, all
labour, scaffolding, watering and curing, sundries and T&P etc all
complete as per direction of the Engineer -in-charge.
Providing 12mm thick cement plaster to the surface of brick
masonry wall with cement mortar (1:6) including racking out
joints, scraping and cleaning the surface and finishing the plaster
surface smooth using wooden floats only to proper plumbs and
level and making grooves and beads to give required ornamental
55 0 finish as per drawings including cost of all materials, 0 0.00 0.00 0.00
conveyance, loading and unloading, all taxes and royalties, all
labour, scaffolding, watering and curing, sundries and T&P etc all
complete as per direction of the Engineer -in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing 6mm thick cement plaster with cement mortar of (1:4)
to ceilings of roof slabs, stairs, landings, chajja, shelves,
columns, beams and lofts etc. including roughening, scraping
and cleaning and finishing the plastered surface smooth using
wooden floats only to proper plumbs and level, making grooves
and beads to give required ornamental finish as per drawings
60 0 including cost of all materials, conveyance, loading and 0 0.00 0.00 0.00
unloading, all taxes and royalties, all labour, scaffolding, watering
and curing , sundries and T&P etc all complete as per direction
of the Engineer -in-charge.
64 0 Terrace Floor sqm 43.04 205.91 8,862.37
Providing average 25mm thick grading Concrete with (1:2:2)
using 6mm black hard granite chips using 2% water proofing
cement compound of approved quality over top of Roof, Terrace,
including cost of scaffolding, scraping and cleaning the roof
65 0 surface, plastering and finishing smooth to proper slope and 0 0.00 0.00 0.00
gradient including cost of all materials, conveyance and sundries,
T&P etc. complete as per direction of the Engineer -in-charge.
Providing and laying water proofing treatment in sunken portion
of WCs,bathroom etc., by applying cement slurry mixed with
water proofing cementcompound consisting of applying :(a) First
layer of slurry of cement @ 0.488 kg/sqm mixed with water
proofing cement compound @ 0.253 kg/ sqm. This layer will be
allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with
67 0 water proofing cement compound @ 0.126 kg/sqm. This layer 0 0.00 0.00 0.00
will be allowed to air cure for 4 hours followed with water curing
for 48 hours. The rate includes preparation of surface, treatment
and sealing of all joints, corners, junctions of pipes and masonry
with polymer mixed slurry.
Supplying, Fitting, Fixing Double charged Vetrified Tile (600 x
600) of approved make confirming to IS 13755 in floors treads or
steps and landing laid on 25mm thickbed of cement
mortar1:4(1cement : 4sand) filling joints with white cement of
approved quality including cost of all materials labour T & P etc
required for the work all complete as per direction of Engineer in
Supplying, Fixing Double charged Vetrified Tiles (600 x 600)in
Dados Skirting & Risers of Steps of 12mm thick cement plaster
(1:3) jointed with neat cement slurry mixed with pigments to
75 0 match the shade of the tiles including cost of all materials labour 0 0.00 0.00 0.00
T & P etc required for the work all complete as per direction of
Engineer in Charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying & Fixing Granite tiles 20mm thick in floors/ platform
trades or steps and landing on 25 mm thick bed of Cement motar
1:1 Jointed with neat cement slury moxed with pigment to match
79 0 the shades of the tiles including rubbing and polishing including 0 0.00 0.00 0.00
cost of all meterials etc. complete.
Providing & Fixing Floor tiles in floors, treads or steps and
landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1
83 0 sand) jointed with neat cement slurry mixed with pigment to 0 0.00 0.00 0.00
match the shades on the tiles etc. complete.
Providing & Fixing Glazed Tiles in Dados Skirting &Risers of
Steps of 12mm thick cement plaster (1:3) jointed with neat
87 0 cement slurry mixed with pigments to match the shade of the 0 0.00 0.00 0.00
tiles including rubbing and polishing complete.
Supplying, fitting & fixing of Kota Tiles of minimum 16mm thick
and above 0.10 sqm of approved make in floors laid on 20 mm
thick cement mortar (1:4) (1 cement : 4 course sand) and filling
91 0 joints with slurry including cost of all materials, labour T&P etc. 0 0.00 0.00 0.00
required for the work all complete incl. rubbing as per direction of
the Engineer-in-charge.
Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride
(UPVC) (FENESTA/NCL VEKA LTD.) Casenent Door-60-Series
duly manufactured using UPVC reinforced profiles of 60mm x
55mm x 2.5mm for outer frames 102mm x 60mm x 2.5mm
casement Door Sash profile and 74mm x 60mm x 2.5mm
mullion peofile capable of mounting single glazing system,
structurally reinforced with hot dip galvanised up to 50 microns of
minimum thickness of 2.0 mm prefabricated & welded through
fusion welding the door sash shall be fitted with 12mm thick
WPC Board of Greenply make duly fixed with EPDM weathering
seal resistant accessories like clipping locking system made of
93 0 aluminium 1 No. per set of sashes and th esystem isto be 0 0.00 0.00 0.00
installed at the site using anchor fasteners, silicon rubber
sealant,easy glazing/deglazing at site etc. including cost and
conveyance of all material, accessories, labour charges,
materials and product conforming to ASTM D 638-14,EN-447-95
and other applicable codes and standards. (Ref.-Office of the
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Factory made Solid WPC door frame of size 95mmx55mm
fabricated .The door frame consist of four segments which are
provided with plug-in-socket arrangement in-situ in the mould.
The segments are plugged in and are joined together by means
of screw. The WPC frame shall be provided with The material
and process for manufacturing the door frames shall conform to
Relavent I.S.specification. The finish of door frame will be plain
98 0 colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ 0 0.00 0.00 0.00
Teak wood/sand stone/Champagne/Pastel blue or any other
colour using high quality pigments complete in all respect as per
specification and direction of the Engineer in charge.
Factory made single leaf Solid WPC (Wood polymer) composite
door shutter of 25mm thickcompacted with wood grain finish
structural foam panel of 29mm thickness and a density of
20kg/cu.mtr shall be used as core material for fitting the metal
fittings such as tower bolts, aldrops, handles etc shall be
provided. A structural adhesive compatible with (EPS) foam shall
be used for bending the core material, The material and process
for manufacturing the door shutters shall conform to RV-TIFAC
composites Design Centre's standards and specifications and
102 0 the door shutters Conforming to relevant I.S.specification. The 0 0.00 0.00 0.00
finish of door shutter will be plain colour white/ Ivory/ Beige/ Light
grey/ Mahogany/ Teak wood or any other colour using high
quality pigments. Three heavy whight mild steel butt hinges type-
I(ISI marked) size 100mm are to be fitted on one side of shutter.
Providing and fixing 1mm thick M.S. sheet door with frame of
40x40x6 mm angle iron and 3 mm M.S. gusset plates at the
junctions and corners, all necessary fittings complete, including
applying a priming coat of approved steel primer.Using M.S.
angels 40x40x6 mm for diagonal braces
Two track two panels sliding window made of (big series) frame
67 x 50 mm & sash 46 x 62 mm both having wall thickness of
2.3 ± 0.2 mm and single glazing bead / double glazing bead of
appropriate dimension. (Ref.-DSR-Page-549, Item-
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride
(UPVC) (FENESTA/NCL VEKA LTD.) Ventilators Top Hung-60-
Series duly manufactured using UPVC reinforced profiles of
60mm x 50mm x 2.5mm for outer frames, 75mm for outer
frames. 75mm x 60mm x 2.5mm for casement window sash
profile capable of mounting single glazing system, structurally
reinforced with hhot dip galvanised up to 50 microns of minimum
thickness of 1.5 mm prefabricated & welded through fusion
welding the window sash shall be fitted with EPDM weathering
seal resistant accessories like clipping locking system made of
113 0 aluminium 1 No. per set of sashes and th esystem isto be 0 0.00 0.00 0.00
installed at the site using anchor fasteners, silicon rubber
sealant,easy glazing/deglazing at site etc. including cost and
conveyance of all material, accessories, labour charges,
materials and product conforming to ASTM D 638-14,EN-447-95
and other applicable codes and standards.(Ref.-Office of the
Engineer-In-Chife (CIVIL), Odisha Nirman
Soudha,Bhubaneswar. Lt. No-
Supplying, fitting, fixing of M.S grills of approved design and
specification by using M.S. flat, angle, square bar confirming to
I.S. No. 1977/95 in wooden choukath / brick wall with necessary
nos of screws as may be required including cutting holes for
clamps & fixing the grills with C.C. (1:2:4) by using 12mm size
118 0 H.G. chips wherever necessary in all floors and all heights 0 0.00 0.00 0.00
including watering, curing ,scafolding with cost, conveyance,
taxes of all materials, cost of all labour, labour cess, T&P etc
required for the work complete in all respect as directed by
Engineer-In-Charge.
Coloured toungened glass 6mm thick substrate with reflective
soft coating on face # 2, + 12mm Airgap + 6mm Heat
Strengthened clear Glass of approved make having properties as
visible Light transmittance (VLT) of 25 to 35 %, Light reflection
123 0 internal 10 to 15%, light reflection external 10 to 20 %, shading SQM 113.40 4443.88 5,03,935.99
coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K
etc. The properties of performance glass shall be decided by
technical sanctioning authority as per the site requirement.
Supplying ,Fitting and fixing of stainless Steel of 304 grade in
hand railing using 50mm dia of 2mm thick circular pipe with
Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr C/C and
stainless square pipe bracing of size 32mm x 32mm x 2mm in 3
124 0 rows in stair case as per approved design and specification, 0 0.00 0.00 0.00
buffing, pollishing etc. with cost, conveyance, taxes of all
materials, labour, T&P etc. required for the complete in all
Painting synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade with two or
more coats on new work over a coat of suitable shade with
primer of approved brand as per manufacturer's specification
128 0 including cost of all materials with taxes and transportation, all 0 0.00 0.00 0.00
labour, scaffolding, sundries, T&P etc. All complete as per the
direction of the Engineer -in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
132 0 Terrace Floor sqm 3.60 257.71 927.76
Painting two coats with Water soluble weather coat paints of
approved shade of approved make or equivalent over out side
brick wall over a coat of primer, by means of brush to outside
surface of new walls after scraping, cleaning the surface
including all cost of materials, scaffolding, labour, watering &
curing T&P etc complete as per direction of Engineer -in-
Distempering two coats to walls with two coats of putty and one
coat of primer on the plastered surface by means of rollers to
give an even shade including cost of all materials, labour,
138 0 conveyance, taxes, royalties, scaffolding, sundries, T&P etc, All 0 0.00 0.00 0.00
complete as per the direction of the Engineer-in-charge
Making plinth protection 50mm thick cement concrete 1:3:6 over
75mm bed of dry brick ballast 40mm nominal size well rammed
143 0 and consolidated and grouted with fine sand including finishing 0 0.00 0.00 0.00
the top smooth.
145 0 Sub-Total of Civil Works 0 0.00 0.00 2,87,15,969.77
146 0 Plumbing Works 0 0.00 0.00 0.00
Supplying all materials, labour, T&P and providing and fixing to
wall or ceiling and floor C-PVC pipes conforming to pipe fittings
of the following nominal bore with clamps including making good
the wall, ceiling and floor all complete as per specification and
direction of the Engineer in charge
149 (i) 20mm dia C-PVC pipe (Ashirbad/Supreme/Truflow) Mtr. 315.00 286.74 90,323.10
150 (ii) 25mm dia C-PVC pipe (Ashirbad/Supreme/Truflow) Mtr 236.00 390.93 92,260.42
40mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)
152 (iv) 50mm dia C-PVC pipe (Ashirbad/Supreme/Truflow) Mtr 115.00 1233.81 1,41,887.92
154 (i) 40mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)(For Ring) Mtr 98.00 855.50 83,839.00
50mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)(For Ring)
Providing all materials, labour, T&P for fitting and fixing of UPVC
SWR pipes (Type-B) confirming to IS-13592/1992 with latest
revision & ISI mark both below & above ground level or fixing on
wall surface upto 3rd floor roof including scaffolding wherever
necessary with requisite testing. The cost inclusive of all taxes,
transportation, loading & unloading etc. all complete as per
specification & direction of the Engineer-in-charge. Make :
(Ashirbad/Supreme/Truflow)
158 (i) 110mm dia U-PVC pipe (Ashirbad/Supreme/Truflow) Mtr 238.00 539.14 1,28,315.80
160 (i) 110mm dia U-PVC pipe (Ashirbad/Supreme/Truflow) Mtr 217.98 539.14 1,17,522.17
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and cutting holes through
existing brick work including making good the damages in
161 3 cement mortar (1:4) for taking PVC pipes and fittings etc all 0 0.00 0.00 0.00
complete as per PH specification and direction of the Engineer in
Supplying all materials, labour, T&P and cutting hole in R.C.C
floors, roofs, etc upto 19 cm thick for passing P.V.C pipes and
fittings etc and repairing the holes after insertion of pipes etc
with cement concrete (1:2:4) including finishing complete so as
to make it leak proof as per direction of the Engineer in charge.
164 (i) Ground Floor Each 8.00 186.32 1,490.58
Supplying all materials, labour, T&P and cutting grooves in
pucca floors and walls for taking PVC pipes and making good the
damages as per the direction of the Engineer in charge.
Supplying all materials, labour, T&P and fitting and fixing
brass/CP fittings of the following nominal bore with supply of all
jointing materials complete as per specification and direction of
the Engineer in charge
168 (a) 15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) Each 32.00 1016.33 32,522.69
169 (b) 15mm dia CP Bib cock (Con-CHR-047KN Jaquar make) Each 10.00 1306.73 13,067.32
15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar
171 (d) 15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make) Each 8.00 1364.79 10,918.30
172 (e) Elbow action Bib cock(Jaquar)FLR-5033B Each 1.00 4956.00 4,956.00
173 (f) 15mm dia CP Health faucet (Con-ALD-CHR-573 Jaquar make) Each 8.00 1945.47 15,563.73
15mm dia CP extension piece
177 (j) Double Coat Hook (ACN-1161N) Each 8.00 708.00 5,664.00
PVC Waste Discharge Pipe
179 (l) PVC Supply Connection Pipe Each 16.00 173.46 2,775.36
180 (m) 125mm dia CP gratings Each 26.00 98.53 2,561.78
181 (n) 50mm dia G.M or Brass F.W valve (Sakti make) Each 10.00 3012.78 30,127.76
25mm dia G.M or Brass F.W valve (Sakti make)
Supplying all materials, labour, T&P and fitting and fixing 10 litres
capacity low level flushing cistern with a pair of cast iron or M.S
brackets complete with fittings such as siphonic arrangements
15mm nominal size brass/pvc ball valve with polythene float CP
brass handle, unions and couplings for connection with inlet,
outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc
183 7 inlet connection pipe including cutting holes and making good the 0 0.00 0.00 0.00
same and connecting the flush bend with cistern and closet and
connecting the inlet pipe with supply main etc all complete as per
specification and direction of the Engineer in charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
10 litres PVC L.L. Cistern (Slimline-white)
Supplying all materials, labour, T&P and fixing vitreous china
water closet, squatting pan (Indian type W.C pan/Orissa pattern
squatting pan conforming to IS:2556-part-3-2004) duly
embedded in cement concrete (1:5:10) using 4cm size hard
granite metal including fixing a pair of vitreous china 250mm x
130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap
185 8 (with/without 50mm dia horn) for water closet squatting pan 0 0.00 0.00 0.00
including jointing the trap with pan in cement mortar (1:1),
cutting the floor and mending good the damages etc all complete
as per specification and direction of the Engineer in
charge(Nycer,parryware make)
580mm size Orissa pan(Hindware/Parryware/Jauar)
Supplying all materials, labour, T&P and fixing bowl pattern urinal
including connecting the urinal with waste pipe by means of
white lead mixed with chopped hemp etc all complete as per
specification and direction of the Engineer in charge.
Halfstall Urinal(Parryware/Hindware/Jauar)
Supplying all materials, labour, T&P and fixing Wash Down
Water Closet (European type W.C pan) with integral ‘S’ or ‘P’
trap to the floor with wooden plug and chromium plated screws
189 10 including jointing the trap with soil pipe in cement mortar (1:1) 0 0.00 0.00 0.00
etc all complete as per specification and direction of the Engineer
E.W.C. with seat cover (plain)(Parryware/Hindware/Essco)
Supplying all materials, labour, T&P and fixing wash basins with
hole for pillar taps conforming to IS:2556-part-4-2004 with cast
iron or M S brackets painted white including cutting holes in walls
and making good the damages with supply of wooden plugs,
screws and cement etc, fixing pedestal for wash basin recessed
at the back for the reception of pipes and fittings, fixing PVC
waste pipe of 32mm nominal diameter for wash basin including
brass check nut complete, fixing pillar taps capstan head screw
down high pressure lettered ‘Hot’ and ‘Cold’ with long screws,
191 11 shanks and back nuts of 15mm dia nominal bore(Plaza make), 0 0.00 0.00 0.00
fixing 15mm dia PVC inlet connection pipe and making
connection with pillar cocks and supply mains for wash basin,
fixing 32mm dia CP brass waste(Plaza make), etc all complete
as per specification and direction of the Engineer in charge
Halfpedestal basin(560x450)Hindware /Jaquar CNS-801+CNS
Supplying all materials, labour, T&P and fixing mirror of superior
glass conforming to IS:3438-1996 mounted on 6mm thick A.C
sheet or plywood sheet and fixed to wooden plugs with CP
screws and washers complete as per specification an direction of
the Engineer in charge.
450mm x 750mm size B.E mirror
195 (ii) Large size mirror with frame Sqm 0.00 2088.95 0.00
Supplying all materials, labour, T&P and fixing standard sized CP
towel rail complete with CP brass brackets fixed to wooden plugs
196 13 with CP screws as per specification and direction of the Engineer 0 0.00 2439.18 0.00
25mm x 600mm long CP towel rail(Jaquar)ACN-ACR-1111SM
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
CP towel Ring(Jaquar)ACN-ACR-1121N
Supplying all materials, labour, T&P and fixing CP soap holder
complete with CP brass brackets fixed to wooden plugs with CP
199 14 screws as per specification and direction of the Engineer in 0 0.00 0.00 0.00
CP soap holder (Jaquar)ACN-ACR-1131N
SOAP DISPENSER WITH GLASS BOTTLE (Jaquar)ALD-BCH-
Supplying all materials labour T&P and filling in foundation and
plinth with sandwell watered and rammed including conveyance
of all materials to work sitepayment of royalty taxes etc all
complete as per direction of Engineer in charge In ground floor
Supplying all materials, labour, T&P and providing cement
concrete (1:4:8) with 4cm size hard granite metal including
watering, curing, conveyance of all materials to worksite,
203 16 payment of royalty, taxes etc all complete as per specification cum 7.80 4811.69 37,531.15
and direction of the Engineer in charge In ground floor
Supplying all materials, labour, T&P and constructing Gully Trap
Chamber of the following inside size with 8cm thick R.C.C
precast cover slab in cement concrete (1:2:4) mix using 12mm
size h.g chips, foundation concrete (1:4:8) using 40mm size hard
granite metal on bed and around trap, Fly ash brickwork in c.m
(1:6) in F&P and inside 12mm thick cement plastering (1:3)
204 17 finished with a floating coat of neat cement including fixing 0 0.00 0.00 0.00
100mmx100mm size HCI gully trap,150mmx150mm size C.I
grating etc all complete as per approved drawing, specification
and direction of the Engineer in charge.
Supplying all materials, labour, T&P and constructing Inspection
Chamber of the following size with cement concrete(1:3:6) using
40mm size hard granite metal on bed, 1st class Fly ash
brickwork in cement mortar(1:6),moulding and shaping the
channel inside and benching with cement concrete (1:2:4) using
12mm size h.g chips,12mmthick cement plaster (1:3) with
punning to inside, cement flush pointing (1:3) to outside, R.C.C
cover slab in (1:2:4) using 12mm size h.g chips with RCC man
206 18 hole cover, earthwork in excavation in all kinds of soil and refilling 0 0.00 0.00 0.00
the cavity around the chamber including watering, curing,
conveyance of all materials to worksite, payment of royalty, taxes
etc all complete as per approved specification and direction of the
Engineer in charge.
Inside size 760mm x 760mm x 460mm
Fitting and fixing RCPC cover slab (0.45m dia)
Triple layer Sintex tank 5000 liter.
210 0 EXTERNAL PH WORK 0 0.00 0.00 0.00
Supply all materials, labour, T&P and providing, fitting and fixing
of centrifugal pump set to run on 3phase/1phase line voltage
ranging from 320 volt to 450 volt with suitable control pannel,
jointing with GI/ PVC/ HDPE pipes electrification,
211 20 testing,commissioning,trial running, conveyance of all materials 0 0.00 0.00 0.00
to worksite, payment of taxes etc all complete as per
specification and direction of the Engineer in charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
3 HP single phase Vetrical submerssible pump set.
Labour charges for lowering, testing, commissioning &
transportation to site etc.
Supplying all materials, labour, T&P and providing and laying in
trenches PVC ASTM pipe of the following nominal bore, tube
215 21 fittings, testing all complete as per specification and direction of 0 0.00 0.00 0.00
the Engineer in charge.
Supplying all materials, labour, T&P and providing and fixing to
wall or ceiling and floor CPVC pipes of the following nominal
bore and pipe fittings with clamps including making good the wall
and testing as per specification and direction of the Engineer in
Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr
initial lift including rough dressing and breaking clods to
220 23 maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr 0 0.00 0.00 0.00
in depth and as per direction of the Engineer in charge.
Supplying all materials, labour T&P and fitting and fixing
brass/CP/PVC fittings of the following nominal bore with supply
222 24 of all joiniting materials complete as per specification and 0 0.00 0.00 0.00
direction of the Engineer in charge.
50mm dia Brass N. R. Valve
50mm dia Brass Check Valve
50mm dia Brass F. W. Valve
Supplying all materials, labour, T&P and laying in trenches (to
level or slope) unplasticized PVC pipes conforming to IS:
4985/2000 of the following outside dia for class–3(0.60mpa)
including jointing with supply of approved solvent cement by non-
heat application method/as per manufacturer’s specification,
providing and laying in trench cement concrete (1:4:8) with
226 25 40mm size hard granite metal in the Type C-1 standard bedding 0 0.00 0.00 0.00
surrounding or encasing including concrete for bedding and
curing etc all complete as per PH specification and direction of
the Engineer in charge.
227 (i) 200mm dia u-pvc pipe alround concrete Mtr 180.00 2063.70 3,71,466.36
Supplying all materials, labour, T&P and providing fitting and
fixing (Aqua guard) Pure Chill 120 PSS UV of size
750x570x1350mm height with water storage capacity 120 liters
228 26 along with 3 nos of faucets 2 for cold water and 1 for normal 0 0.00 0.00 0.00
water including a flow of 1.5 ltr per minute etc all complete as
per approved drawing,specification and direction of the Engineer
Aquagurd Pure Chill 120 PSS UV
Supply,Providing, fixing, testing and commissioning in position
UV stabilised 75 mm dia UPVC Rain water pipe with Fittings (IS:
13592 Type - B). In case of ceiling hanging, the supply of Pipe
Clamps (Chilly/MS angle) is in the scope of Contractor.
Supply,Providing and fixing 150 mm x 150 mm.dia CI Grating
for Rain water pipes 110 mm dia.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing & fixing rain water `Khurras' size 200x200 mm required
depth with lead flashing around the pipe with one piece lead
sheet of 3 mm thick set on a layer of cold bitumen.
234 0 Sub-Total of Plumbing Works 0 0.00 0.00 28,49,476.79
235 0 Electrical Works 0 0.00 0.00 0.00
236 A. Circuit Cum Wiring 0 0.00 0.00 0.00
Supplying & Wiring for light point/ fan/ exhaust fan point/ call bell
point with 1.5 sqmm FR PVC insulated copper conductor single
core cable in surface / recessed 1.6 mm thick PVC conduit with
modular switch and earthing the point with 1.5 sqmm FRLS PVC
237 1 insulated copper conductor single core cable including providing 0 0.00 0.00 0.00
modular box with cover of requisite number of modules including
providing cover plates as required.
Single light point controlled by one 6A switch or first light point of
239 b) Subsequent point of group control Each 108.00 529.82 57,220.56
Supplying & Wiring for twin control light point with 1.5 Sqm.m
FRLS PVC insulated copper condutor single core cable in
surface / recessed PVC conduit 2 way modular switch,modular
240 2 plate,suitable GI box and earthing the point with 1.5 Sqm.m Each 8.00 823.64 6,589.12
.FRLS PVC insulated copper conductor single core cable etc as
Supplying and fixing two module steeped type electronic fan
241 3 regulator with proper modular plate switch box including Nos 40.00 593.54 23,741.60
connections etc. as required.
Supplying and fixing 6 Amp plug with 6 Amp switch (Modular
Type) on existing board.
Supplying & fixing suitable size GI Box with modular plate and
cover in front on surface or in recess, including providing and
243 5 fixing 5pin 5/6 amps modular socket outlet and 5/6 amps Nos 9.00 518.02 4,662.18
modular switch etc. as required.
Supplying & fixing suitable size GI Box with 6 modular plate and
cover in front on surface or in recess, including providing and
244 6 fixing 2 nos 5pin 5/6 amps modular socket outlet and 2nos 5/6 Nos 17.00 797.68 13,560.56
amps modular switch etc. as required.
Supply, installation, testing & commissioning of 6 / 16 Amp Plug
Boards consisting of a 16 Amp clip-in type modular switch with
indicator and a 6/16 Amp clip-in type modular shuttered plug
socket fixed on metallic concealed box including interconnections
and making good the damages caused complete as required and
as per direction of Engineer-in-charge.
Supplying, installation, testing & commissioning of 20 Amp AC
starter switch with 25 Amp modular socket outlet with 25 Amp
Plug on surface or in recess, on 2 Nos two module GI box with
246 8 plate etc. complete with direction of Engineer-in-charge. Starter- Each 15.00 1373.52 20,602.80
Crabtree(cat no-ACT0202504) or equivalent.
Wiring for circuit/ submain wiring along with earth wire of
following size of FRLS heavy gauge PVC insulated copper
247 9 conductor single core cable in heavy duty PVC conduit laid in 0 0.00 0.00 0.00
surface/ recess as required.
251 B. Fan & indoor Fixtures 0 0.00 0.00 0.00
Supply, delivery and fixing of Ceiling fan hook box made out of
18 swg GI sheet and containing 10 mm dia round ms bar
projecting atleast 150mm on either side & duly bent to
accommodate ceiling fan down rod bolt & having earthing
arrangement as per direction of Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, installation, testing and commissioning following type
of light fixtures with dummy box for surface mounted fixtures
only, fans and exhaust fans with all accessories, as
253 11 required.(The colour temprature for fixtures shall be between 0 0.00 0.00 0.00
3500 deg K & white in colour as per application) ( Use
antibacterial UV Light for blood bank rooms.)
Surface mounted 2'X2' LED fitting (3000 Lumen/ 36W) similar
to PHILIPS (CAT No:SM402C LED36S/840 SRD
W62L62 IA4) / Equivalent of Bajaj/ Wipro.
Surface mounted 1'X1' LED fitting (1500 Lumen/ 18W) similar
255 b) to Halonix (CAT No:HLDLS-S06-18-CW) / Equivalent of Bajaj/ Each 88.00 2773.00 2,44,024.00
Round Surface mounted LED fitting (1450 Lumen/ 18W)
similar to Philips (CAT No: Star surface 8718699607845 ) /
Equivalent of Phillips/ Wipro.
Commercial Batten type wall mounted 4' LED fitting (2200
Lumen/ 20W) similar to PHILIPS (CAT No:BN021C LED20S
PSU CW GR S2) / Equivalent of Bajaj/ Wipro.
Retail Down type LED Light surface fitting (900 Lumen/ 9 W)
similar to PHILIPS (CAT No:Edge Glow GenNEXT Surface
Downlighter 9W) / Equivalent of Bajaj/ Wipro.
Endura type 700 Lumen/10W LED Bulkhead wall fitting PHILIPS
259 f) (CAT No:WT140W LED7S CW PSU S1 PC)/ Equivalent of Each 15.00 1486.80 22,302.00
SITC of Sleek LED 10 watt Mirror light fitting with extruded
polycarbonate housing,High optically efficient diffuser,above
wash basin complete with all accessories etc. ( Make : WIPRO
Model No:LL20-111-XXX-60-NE or similar model of
PHILIPS/Bajaj/Havells or equievalant reputed make & model A
catagory ISI marked as approved. )
Supplying, installation, testing and commissioning of ceiling fan
(5 star rating) including wiring the down rod, earthing etc as
required (Make : Bajaj/Usha/ Crompton/ Orient/ Khaitan/
Supplying, installation, testing and commissioning of Heavy Duty
Exhaust fan (5 star rating) including louvres, Ceiling Rose &
263 13 Electric Connection as required. (Make -Bajaj/Usha/ Crompton/ 0 0.00 0.00 0.00
Orient/ Khaitan/ Havells)
266 C. Panels, MDBs, DBs. MCBs 0 0.00 0.00 0.00
Supply, installation, testing and commissioning of cubicle type
sectionalised, front operated top entry dust and vermin proof
M.V.Panel Boards suitable for operation at 415V, 3 phase, 4
wire, 50Hz distribution system fabricated out of 2.0 mm thick
CRCA sheet, insulated busbar with heat shrienkable PVC sleeve,
base channel, wiring with space heater, thermostat and control
MCBs shall be provided for all vertical sections of main LT Panel,
all hinged door shall be earthed through 2.5 sq mm tinned
braided, the incoming and outgoing feeders shall be
accommodated in a modular arrangement, detachable gland
267 0 plates, adequate size cable alley, Sign writing, Painting, Earthing, 0 0.00 0.00 0.00
Numbering, Danger plate, including PVC insulated copper FRLS
wires of minimum 1.5 sq.mm & 2.5 sq.mm for CT's etc. with all
accessories including interconnections, earth bus, Surge
protection Device(SPD) etc. as required.(All the incomers of the
panel must be mounting with RS 485 communication port for
BMS Compartibility)
269 14 Main Distribution PANEL 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
One (1) Incomer From Transformer - 800 Amp, 50 KA, FP
MCCB , One(1) set of – 1000/5A , 15VA , CL 1.0, CT with 3
Nos Phase indicating lamps with control fuse/ MCB Digital
Voltmeter and Ammeter with selector switch .(with required other
Busbar - 1000 Amp Al busbar suitable for operation at 415 Volt,
50 Hz, 3 Phase Supply.
Four(4) - Outgoing Feeders for (Kitchen ventilation, AutoClave &
272 0 Two spares) each Comprising of 0 0.00 0.00 0.00
One (1) -160A TPN 25KA MCCB with required other accesories.
Twelve (12) - Outgoing Feeders for (4 No PDBs, 1Nos Lift, STP,
274 0 Water Supply, Kitchen DB & 4 spare) each Comprising of 0 0.00 0.00 0.00
One (1) -63A TPN 25KA MCCB with required other accesories.
Eight(8) - Outgoing Feeders for (3LDB,External Lighting & 4
spares) each Comprising of
One (1) -32A TPN 25KA MCB with required other accesories.
Supplying and fixing following way, horizontal type three pole and
neutral, sheet steel, MCB distribution board, 415 V, on surface/
recess, complete with tinned copper bus bar, neutral bus bar,
earth bar, din bar, interconnections, powder painted including
earthing etc. as required. (But without MCB/RCCB/Isolator). (For
all Floors LDBs, PDBs, ACDBs & UDBs)
Supplying and fixing following rating MCBs/ Isolator in the
existing MCB DB complete with connections,testing and
commissioning etc. as required
285 a) 63 Amps, FP 10 KA MCB (C-Curve) Each 5.00 3543.54 17,717.70
286 b) 32 Amps, FP 10 KA MCB (C-Curve) Each 3.00 2508.68 7,526.04
287 c) 6 Amp to 32 Amp, 10 KA SP MCB (C-Curve) Each 126.00 468.46 59,025.96
288 D. Cables, Cable Laying & Termination 0 0.00 0.00 0.00
Supplying & Testing of 1.1 KV grade Aluminium XLPE power
289 17 cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. 0 0.00 0.00 0.00
Laying of one number PVC insulated and PVC sheathed/XLPE
power cable of 1.1KV grade of following size direct in ground
295 18 including excavation (75 cm),sand cushioning,protective covering 0 0.00 0.00 0.00
and refilling the trench etc as required.
297 b) Above 35 sq. mm and upto 95 sq. Mm Mtr 150.00 398.84 59,826.00
298 c) Above 95 sq. mm and upto 185 sq. mm Mtr 100.00 415.36 41,536.00
299 0 TERMINATION OF CABLES 0 0.00 0.00 0.00
Supply & Making end Termination with brass compression gland
and Cu/aluminium lugs for PVC insulated and PVC sheathed
cable of 1.1 kv grade (without cost of Cable)
Supply & Fixing of Copper plate Earthing (600x600x3mm thick)
including accessories, and providing masnory enclosure with
cover plate having locking arrangement and
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia GI
pipe from earth electrode including connection with brass nut,
bolt, spring, washer excavation and refilling etc. as required.
Providing and fixing 25 mm X 5 mm dia copper strip on
308 22 wall/surface or in recess for connection etc. as required. Mtr 90.00 1006.54 90,588.60
Providing and fixing 4.0 mm dia cu wire on surface or in recess
for loop earthing as required.
310 J External Light Fittings 0 0.00 0.00 0.00
Supplying, installation testing and commissioning following type
311 24 of external light fixtures with all accessories as required. 0 0.00 0.00 0.00
60 Watt Outdoor LED Luminaires Street Light (6500 lumen)
PHILIPS (CAT No:Make: Philips BRP062 LED 65 CW SLA S1
PSU) / Equivalent of Bajaj/ Wipro connected to 32 MM Dia 800
mm GI bend pipe fixed on Wall or column with GI Clamps & hard
ware etc. as required.
Gate Light (Make: Bajaj Spigot for BJMPTI 125 MV LPF CAT
No: HPMV 125 W or equivalent of Philips/ Wipro)along with
313 b) loose wire box, connectors with one 10A MCB as required Nos 2.00 5551.90 11,103.80
suitable for operation on 240 Volt AC supply as required.
314 K Feeder Pillar for External Lights 0 0.00 0.00 0.00
Supplying installation testing commissioning of double door
feeder pillar fabricated out of 2 mm thick CRCA sheet duly
painted, 200 Amp Al busbar with neutral bus rincluding cc/ brick
foundation as required including following internal fixtures.
316 0 1 No - 32 Amp TPN MCB Incomer (C-Curve) 0 0.00 0.00 0.00
317 0 4 Nos - 16 Amp SP MCB Outgoing (C-Curve) 0 0.00 0.00 0.00
1 No - 16 Amp SP MCB with 6/16 Amp socket outlet with 10
318 0 Amp modular switch and 1 No- Bracket Holder with 6 Amp Set 1.00 25960.00 25,960.00
Modular switch.
319 L Lightning Protection System (Arrestor) 0 0.00 0.00 0.00
Providing and fixing of lightning conductor finial, made of 25 mm
dia 1000 mm long, Solid Copper , having multiple prong at top,
320 26 with 85 mm dia 6 mm thick copper base plate including holes Each 4.00 8732.00 34,928.00
etc. Along with Test junction complete as required.
321 0 Sub-Total of Electrical Works 0 0.00 0.00 30,68,455.48
322 0 Firefighting Works 0 0.00 0.00 0.00
323 V. Fire Extinguishers 0 0.00 0.00 0.00
Supplying installation testing and commissioning of ABC type fire
extinguishers of 6 kg capacity confirming to IS:14609 including
cost of all material & labour for all floors & service building etc. all
MINIMAX/CEASEFIRE/SAFEX/SAFEFIRE/SAIEX or equivalent
Supplying, installation, testing and commissioning of CO2 type
Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made
from ISI marked seamless cylinder confirming to IS: 7285, fitted
with ISI marked controlled valve confirming to IS: 3224, high
pressure 1mtr discharge hose & horn complete with initial gas
325 2 charged with carrying handle & wall mounting bracket for all Nos 24.00 7091.80 170203.2
floors & service building etc. as per direction of Engineer-in-
charge.Make-MINIMAX/CEASEFIRE/SAFEX/SAFEFIRE/OMEX
Supplying, installation, testing and commissioning of Mechanical
Foam type 9 litre capacity Fire Extinguisher, ISI marked, IS:
10204, containing 540 ml AFFF liquid ISI marked, IS: 4989 Part
II and a polyurethane coated CO2 Gas Cartridge, ISI marked, IS:
326 3 4947 complete with gunmetal union cap, nylon hose with plastic Each 4.00 4681.06 18724.24
foam making branch and wall mounting bracket as per direction
of Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
AUTOMATIC FIRE ALARMING AND DETECTION SYSTEM:
Supplying installation testing and commissioning of
Microprocessor based Addressable Fire Alarm Control Panel (2
loop ) with each loop capacity of 126 detectors and devices in
any flexible combination suitable for serving the followingg
detectors & Devices in maximum with LCD display, complete
withb) 2 Nos 12 Volt 18 Ah SMF battery, Battery backup and
328 4 also provision for 2 Nos potential free Normally open contact per No 1.00 119652.00 119652
loop to be used for interlocking with provision for interface along
PA Controller including call station in built suitable for 240 watt
amplifier as per direction of Engineer-incharge.(Make:-
Supplying installation testing and commissioning of Addressable
Photoelectric type Smoke-Cum-Heat Detector, complete with
329 5 base, isolator and accessories for above false ceiling as per Nos 140.00 3253.07 455429.968
direction of Engineer-in-charge.
Supplying installation testing and commissioning of Addressable
Manual Pull Station(MPC), complete with addressable mini input
330 6 module, back box and accessories as per direction of Engineer-in- Nos 4.00 4443.53 17774.104
Supplying, installing ,testing and commissioning of Hooter Cum
Strobe at 85 dBA @ 3m for Audible annunciation and 75cd
flashing at 1 Hz for visual indication. With Control Module. The
Hooter cum Strobe with Control Module shall be flush or surface 47440.1536
mountable type with all accessories etc., complete and as per
technical specification. The devices shall be of EN and LPCP
Supplying installation testing and commissioning of Supplying &
laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V
rated with annealed copper conductor having XLPE insulation,
332 8 steel wire armouring & FRLS outer sheath complete with all Mtr. 750.00 153.40 115050
accessories as per direction of Engineer-in-charge.
334 C MISCELLANEOUS WORK : 0 0.00 0.00 0
Single sided EXIT LED Light fitting signage(both side visible) with
built in battery back-up for 2 hrs with proper wiring with PVC
conduiting from the existing power sources for all floors etc. 69376.92
Make:- BAJAJ (CAT No : BESL O3 LED SSD WBB Green) /
Equivalent of Crompton/ Wipro/ Philips
336 0 Sub-Total of Firefighting Works 0 0.00 0.00 10,86,857.79
338 F Data Net Working 0 0.00 0.00 0.00
Supply,Installation,Testing & Commissioning of 4 pair Cat6
U/UTP Cable in the existing surface/ recessed steel/ PVC
conduit as required: The 4 pair Unshielded Twisted Pair cable
shall be UL Listed,exceeds the requirements of ANSI/TIA-568-
C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by
internal PE Cross Separator. Full separator. Half shall not be
accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at
250 MHz ,Cable should support operating temperature from -20°
339 1 to +70°C Cable support Conductor Resistance ≤ 9.38 Ω/100m Mtrs. 1200.00 84.96 1,01,952.00
Max., Cable support Delay Skew: < 45 ns/100m, Operating
Voltage: 72V , Impedance: 100 ± 15 Ω @100 MHz. and
Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4
connector channel performance up to 700 MHz , RoHS
Compliant. Make: Tyco / Legrand / Panduit
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply,Installation,Testing & Commissioning of Cat6 I/O with
Face plate: The Outlet shall meet or exceed requirement as per
ANSI/TIA 568C.2,ISO/IEC 11801, & EN50173. The information
outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return
loss should be verified for CAT6 @ 250Mhz & CAT6A @
500Mhz. The information outlet connector shall be of gold/nickel,
340 2 thickness of gold > 0.8 μm. The connectors shall be compatible 0 0.00 0.00 -
as per IEEE 802.3af standard for POE application. The PVC
material of Face plate should complie ABS /UL94-V-O certified.
Make: Tyco / Legrand / Panduit
Supply and installation of Cat6 UTP 24 AWG Patch Cord Patch
cord: 6 UTP Patch Cords are Factory Tested for Better Quality
and Suitable for the High Speed Data Transmission. Complies to
the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data
Networks Speeds Up to 10/100-Base-T and 1000-Base-T.
342 3 Available In LSZH Jacket- Reduced Toxic Gasses Emitted 0 0.00 0.00 -
During Combustion , RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated
Contacts , 100% Factory Tested , Transparent Boot Cable
Assemblies. Make: Tyco / Legrand / Panduit
Supply,Installation,Testing & Commissioning of Cat 6, 24-port
loaded, 1U Modular Jack Panel Should accommodate Cat6 with
Rear Cable Management and Front removable Tooless
Information outlet. Should have easy clip management with
345 4 labels and clear label covers, Made with of Dicast Aluminium Nos 2.00 16486.96 32,973.92
Alloy Material and Non Corrosive with Cat6 toolless RJ45 x 24
ports with color code front panel with patch cord locking. Make:
Tyco / Legrand / Panduit
Supply,Installation,Testing & Commissioning of L-2 Managed
Switch with minimum 24 X 10/100 Base-T ports and additional
4 nos. SFP upl ink ports , Switch should have mia 56 Gbps
Switching Fabric and I6K MAC Address, Support 1Pv6
Management , support LEEE 802.17/equivalent for sub 50ms
346 5 ring protection, lGMP and MLD snooping, Operating temperature Nos 1.00 36137.50 36,137.50
0 to 50 degree C, Shou ld support CLl, GUl, USB or equivalent
interface for talcing backu p, UDLD and single LP management
of min 24 switches. Make: Cisco/HP/Netgear/Digisol
Supply of 24 Port Unmanaged POE Switch 8x10/100/1000 Mbps
PoE ports, each port support 802.3af/802.3 at self adaption,
347 6 1x10/100 Mbps uplink port,123watts PoE, 250 mtr. transmission, Nos 1.00 30680.00 30,680.00
4 kV surge protection, plug and play installation.
Supply,Installation,Testing & Commissioning of 12U/500D Wall
Mount Rack with Accessories: The rack size should be 600W x
500D, Front frame integrated with top, bottom, front and two side
panels for better rigidity and strength, Front Glass Door with
Lock loaded, Compliance with standards shall be UL 2416., DIN
ISO 9001:2008 including Power Distribution Unit (06/16 Amp
348 7 Indian-Standard - 06 Socket - Single Pole / Screw Mountable / Nos 1.00 12491.48 12,491.48
16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with
Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC -
90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic
cable loops and H/W screw. Make: Valrack/Rittal/ APW
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply, Installation, Testing & Commissioning of Server based
IPPBX along with operarator .
Main Unit Power Supply
Auto Attendant/IVRs
350 8 Voice Mail for all users with email faciliy Music on Hold, Speed Set 1.00 159300.00 1,59,300.00
Dial Hunt Group, Call Routing And many more…
1 PRI port with recording facility 50 Analog Extensions through
SIP Based Media.
Supply Installation and Commissioning of centralized Operator
Console with all dignostic Software of IP EPABX System
Approved Make- NEC/Avaya/Alacatel
Supply Installation, Testing and Commissioning of Analog
Speaker Phone with backlight.
Supply,Installation,Testing & Commissioning of 4MP Dome IR
Network Camera (1/3" CMOS sensor, Mini. Pixel of 2688*1520
or higher video quality, frame rate of Up to 25fps, Ultra 265,
H.265, H.264 & MJPEg video compression, 2.8mm Fixed lens,
physical ICR filter of both day and night, 30mtr IR
Distance,120dB WDR ,3Streams Supported, WDR , 3D-DNR for
354 11 noise reduction, BLC, ICR, EXIR, Audio In and Out, Alam in and Nos 19.00 12080.84 2,29,535.96
Out. IPv4/IPv6 network supported, IP67, IK10 rated for
weatherproofing, ONVIF ver 2.2 or higher, PoE IEEE 802. 3af
(UL, FCC, CE, BIS certified.) with accessories as require. Make-
Honeywell/UNV/Milesight/SIT/Hikvision
Supply,Installation,Testing & Commissioning of 4MP Bullet IR
Network Camera (1/3" CMOS sensor, Mini. Pixel of 2688*1520
or higher video quality, frame rate of Up to 25fps, Ultra 265,
H.265, H.264 & MJPEg video compression, 2.8mm Fixed lens,
physical ICR filter of both day and night, 30mtr IR
Distance,120dB WDR ,3Streams Supported, WDR , 3D-DNR for
355 12 noise reduction, BLC, ICR, EXIR, Audio In and Out, Alam in and Nos 4.00 12260.20 49,040.80
Out. IPv4/IPv6 network supported, IP67, IK10 rated for
weatherproofing, ONVIF ver 2.2 or higher, PoE IEEE 802. 3af
(UL, FCC, CE, BIS certified.) with accessories as require. Make-
Honeywell/UNV/Milesight/SIT
Supply,Installation,Testing & Commissioning of 32Ch Network
Video Recorder, Support Ultra H.265/H.265/H.264 video formats
Supports mainstream cameras of ONVIF conformance(Profile S,
Profile G, Profile T and RTSP protocols. Support 2-ch HDMI, 1-
ch VGA. HDMI1 and HDMI2 up to 4K (3840x2160) resolution Up
356 13 to 12 Megapixels resolution recording. Support RAID 0, 1, 5, 6, Nos 1.00 47200.00 47,200.00
10, 4 SATA HDDs, Up to 10TB for each HDD. Make-
Honeywell/UNV/Milesight/SIT/Hikvision
Supply,Installation,Testing & Commissioning of 6TB
357 14 Surveillence Hardisk. Make: Segate/ WD/ Toshiba Nos 1.00 17700.00 17,700.00
Supply, Installation of 32" TFT Colour Monitor as per
specifications.
Supply, Installation, testing and commissioning of Single phase
230V 10KVA sine wave online Ups with 30min power back up.
Make:-APC, Microteck, Luminus, Emersion etc.
Supply, delivery and laying of following sizes of 2mm thick PVC
Conduit concealed in wall/ column/ roof slab of the building
alongwith other accessories and 18 swg GI wire complete for
361 17 Electrical Wiring/Telephone / TV & Data cable wiring as required 0 0.00 0.00 -
and as per direction of Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Elevator Type Bed passenger elevator BWU10/10-19 Product
KONE U MonoSpace No of Units 1 Load & Capacity 1020 kg or
persons Speed 1 m/s Stops & Openings 2 stops & 2 openings,
Single entrance car Travel height 4.17 m Elevator Grouping
Simplex Full Collective Control Well Dimension 2000 mm width
and 3050 mm depth (required) Head Room height 4200 mm
(required) Pit Height 1750 mm (required) MAP Floor Position
Topmost floor (TOP) Car dimensions 1000 mm wide x 2400 mm
deep x 2200 mm high Door dimensions 900 mm wide x 2000
mm internal height Door type Two-panel centre opening Panel 4
365 18 Car design Midrange Basic SL10 Car Panel Finish Stainless Nos 1.00 2191428.57 21,91,428.57
steel Hairline AISI441 Ceiling & Lighting Square spot, LED
Stainless Steel Square Spot Light LED Flooring 3 mm Rubber
flooring - Denver gray Coin Patterned Grey Car skirting material:
Stainless steel Hairline AISI441 Car Door Finish Stainless steel
Hairline AISI441.
SHAFT SIZE - 900 x 1750 mm; NO OF LIFT - 02 No ;LIFT
TRAVELLING SPEED - 0.7 mt/sec ; NO OF STOPAGE /
FLOOR – 03 nos. (Ground, first floor,2nd floor,) ;LIFT/CAR
TRAVELS – 13 mt; approx POWER REQUIREMENT – 3 phase
,440 volt,50 H;OVER SPEED GOVERNER – Yes we provide
(For Safety) ; “ I ” CHANEL FOR MOTOR BASE – 200 X 1800 X
10 (Jindal/sail steel) ; ROPE – 13 mm thickness, USHA Martine
Make We provide certificate for rope materials. ; LIFT
CONTROLER – Microprocessor card with all safety (
ADCO/REGID make) ; RESCUE SYSTEM- Automatic Rescue
Device with battery Operation 12 volt/07 AMP HR = 6 no battery
(EXIDE MAKE) ; LANDING DOORS – manual Collapsible door ;
CABIN /CAR DOOR OPARATOR – manul collapsible door ;
DOOR FRAME – Stain Less Steel, (JSL MAKE ) ; CABIN / CAR
ENCLUSER – Stain Less Steel, Mat finish cabin (JSL MAK) ;
CAR FLOORING – PVC tile mat Finish 2 mm thickness. ;
CABIN /CAR DIMENTION – 1200 X 700 mm approx. ; LOP –
Car operate push button & Landing operate Push bottom Wall
mountain Digital type Display. S
368 0 Sub-Total of Other Works 0 0.00 0.00 47,72,867.37
369 Grand Total 4,04,93,627.20
369 Grand Total 4,04,93,627.20
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
5 NIT.pdf
Tender Document
3a GCC PMC Contracting Works.pdf
Tender Document
3b SCC.pdf
Tender Document
8 Milestone.pdf
Tender Document
11 BOQ DHE 007 NHM.pdf
Tender Document
13 List of Approved Makes NHM Project Odisha.pdf
Tender Document
14 Scope of Work.pdf
Tender Document
Drawings Dhenkanal CSSD.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .