Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.0 LAccepted-AOC B 56 LANE NO 4A SECTOR 7 VASHNAVI ENCLAVE CHANNI HIMAT JAMMU 180015 | JAMMU | JAMMU AND KASHMIR | 180015 | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | L2₹36.8 L+₹4.2 L (12.9%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹38.0 L+₹5.4 L (16.6%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹38.6 L+₹6.0 L (18.4%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹45.8 L+₹13.2 L (40.4%)Rejected-Finance 401 SHASTRI NAGAR JAMMU 180004 | JAMMU | JAMMU | JAMMU AND KASHMIR | 180004 | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
8 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Jammu
Air Force Station Jammu
CA NO GE/AFJ-01/2023-24 ADDN/ALTN/IMPROVEMENT TO CERTAIN BUILDINGS AT AF STN JAMMU UNDER GE (AF) JAMMU
2023_MES_588306_1
CA NO GE/AFJ-01/2023-24
Open Tender
Civil Works
Item Rate
270 days
Jammu
As per tender documents
8 documents required · 8 mandatory
₹500
GE (AF) Jammu
₹99,000
Yes
4 Jul 2023
5 Apr 2023
10 May 2023
5 Apr 2023
8 May 2023
24 Apr 2023
Amount
SCHEDULE 'A' PART-I (BUILDING WORK)
Taking down cement plaster to any thickness including over lapping & dado and raking out joints, hacking for key,scrubbing down with water built in cement mortar complete all as specified.
Demolition of PCC in ground floors & pavings exc 15 cm thickness but above ground floors (unreinforced) complete all as specified.
Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. laid, bedded & pointed in any mortar complete all as specified.
Taking down & removing to store chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified.
Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified.
Dismantling existing aluminium partition /door/windows etc including glazing prelaminated particle boards etc and making good all as specified and as directed
Dismantling Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.
Dismantling of AC/ PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings 100 mm dia complete all as specified.
M&L for post anti-termite treatment by injecting at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 50mm centre to centre and sealing the same complete all as specified and directed.
M&L for post anti-termitetreatment of soil under existing floors using emulsion at the rate of one litre per hole 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match with the existing floors all as specified and directed by Engr in Charge.
M&L for post anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres / m including drilling & plugging holes etc. in apron complete all as specified and directed.
M&L for cutting openings, through brick walls built in CM or cement lime mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing & removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc., to store and rubbish not exc. 50m complete all as specified and directed.
Forming jambs, in cement mortar 1:4 etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed.
S & F solid PVC Wall Lining consisting of 5mm thick wood grain PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.
S & F for 5 mm thick PVC sheet fillet of width 35mm for wall panneling inclusive of fixing of wall to make pvc frame etc complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed
M&L Machine cut kota stone slab flooring 20-25mm thick over 20mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and as directed
M&L for preparation of existing kota stone Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed
M&L Vitrified double charge colour Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors incl 5mm wide joint filled with epoxy filling etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed layer of 15 mm thick in CM 1:6 complete all as specified and as directed.
M&L for coloured vitrified tiles of size 600x600x10mm thick in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed layer of 15 mm thick in CM 1:6 complete all as specified and as directed.
Ditto as per srl item no.1.20 but for skiring/dado etc complete all as specified and as directed.
M&L 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate for sub base for laying of tiles complete all as specified and as directed.
M&L for vitrified double charged colour (match with floor tiles) tiles of size 600x150x10mm thick as in dado/skirting set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over and including 10 mm thick cement mortar dubbing coat in CM 1 : 4 all as specified and as directed..
M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed layer of 15 mm thick in CM 1:6 complete all as specified and as directed.
M & L for coloured glazed ceramic tiles of size 450mm x 300mm x 7 mm/300mmx600mmx7mm thick as in dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over and including 10 mm thick cement mortar dubbing coat in CM 1 : 4 all as specified and as directed.
S&F Pressed steel frames (Factory made) made out of 1.25mm thick mm black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame size 105x60mm incl one shop coat of red oxide zinc chrome primer,incl bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side and back fill to chowkahts with PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate after applying and including one coat of black paint to prevent from corrosion complete all as specified and directed by Engr-in-Charge.
S & F 35mm Flush shutters, solid core construction, with solid core construction with pre-laminated particle board exterior grade, prelaminated both sides with decorative choice lamination complete all as specified and as directed.
S&F Anodised Aluminium frame work of for door, windows and ventilators and partition wall with one or more rebates fixed in position as per manufacturer's instruction including necessary joining cleat, glazing clips, rubber packing, beading etc complete all as specified and directed.
S&F 5mm thick sheet glass ordinary quality along with EPDM rubber all around the glass edges n exc 0.50 Sqm in each pane and fixed to Aluminium framed work complete all as specified and as directed.
M&L 12mm thick prelaminated baords, grade 1 quality, exterior grade, decorative type with decorative face veneer on both faces, fixed with beading to aluminium frame-work complete all as 'specified and as directed.
S&F 4 mm thick sheet glass ordinary quality alongwith EPDM rubber all around the glass edges n.exc 0.5 sqm in each pane and fixed into aluminium frame work complete all as 'specified and as directed.
S&F Solar control film 50-micron thick reflective type, sticked to glass panel as per manufacturer’s instruction all as specified and directed.
S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones complete all as 'specified and as directed.
M & L for Stainless steel drapery rod in repair, with dia not less than 25mm with brackets on both end of rod and two nos stainless steelglobe on both ends for each door/windows . Brackets shall be at stainless steel 1.6mm thick complete all as specified and directed.
S&F in repairs of door closer aluminum (die cast) body, hydraulically regulated designation No 3 universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed
S & F exposed metal frame ceiling with 8mm thick PVC Laminated Gypsum board/ tiles 59.5x59.5 CM in size ,Gi frame powder coated of size 600 mm x 600mm grid with fasteners, supports, Hangers 4mm dia G.I (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I flat 40X3mm size 60mm longplugs to ceiling complete as per manufacturer instructions and as directed by Engr-in-Charge.
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as 'specified and as directed.
M & L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as 'specified and as directed.
M&L PCC in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed type B1 (1:2:4) using 20 mm graded crushed stone aggregate complete all as 'specified and as directed.
Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete all as specified by the manufacturer and as per directions of Engineer-in-charge.
Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge
S & F stainless steel barrel tower bolt of extruded section and fixed complete of Size 200 mm long complete all as specified.
S & F stainless steel handle cast type anodized of size 150mm complete all as specified.
S&F Butt hinges 100mm size, medium weight, cold rolled mild steel complete all as 'specified and as directed.
S&F Mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with & including a minimum of 6 bolts & nuts, four on bolt plate & two on staple plate complete all as 'specified and as directed.
S&F stainlessd steel barrel tower blots 200mm long, stove enamelled black, with bright bolt complete all as 'specified and as directed.
Taking up or down steel tubing & connections, including cleaning & S&F new steel tubing & connections in new or old position (Walls, ceiling, floors, etc.) of 15mm bore complete all as 'specified and as directed.
M&L for pre- polished granite slab machine cut of any shade and in sigle piece as approved by GE of 18-20 mm thick inc over 15mm thick in CM 1:4 cement screed bed including Cutting and nosing with suitable hole for cylender gas pipe, grinding and mirror polishing(Granite finish) with suitable moulding/grinding stones for cooking platform complete all as 'specified and as directed.
S&F Vitreous china wash hand basin, white , flat back, size 580 x 450 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), size 670x390x760mm snow white including P or S trap seat cover and flushing cistern white Make :Cera Clair cat part no.51031102,51060102,1510108,1810105,Hindware cat part no.20107 P-18/S-22
S&F in repair Vitreous china table top wash hand basin, snow white , flat back, size 550 x 450x110 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.Make;-Cera corus cat part no. F-52020161,Hindware cat part no.91066
S&F PVC flushing cistern low level 10 ltr capacity with inlet ball valve, float valve and handle including brackets and pipe connecting to WC etc including all fittings and all as specified, including dismantling old flushing cistern any type.
S&F heath faucet(ABS Body) mils steel CP sutabile for 15mm dia pipe with 1.25mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed.Make:- Cera cat part no.F-8020109AB,Hindware cat part no.F-160068
S&F in repair chromium plated stop cock/angle valve with crutch or butterfly handle, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete, all as specified.Make:- Cera cat part no.F-1099351,Hindware cat part no.F-740039
S&F chromium plated stop cock/angle valve with crutch or butterfly handle, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete, all as specified.
S&F bib tap 15mm chromium plated fancy type cast copper alloy with crutch or butter fly handle, screwed down for iron pipe and fixed completeMake:- Cera cat part no.F-1016151,Hindware cat part no.F-740011
S&F in repair 15mm chromium plated bib tap long nose with wall flange and aerator fancy type cast cooper alloy with crutch or butter fly handle, screwed down for iron pipe and fixed complete all as specified and as directed.Make:- Cera cat part no.F-1005152,Hindware cat part no.F-740011
S&F PVC connection 45 cm long fitted with PTMT nut and washer on both ends, fixed to 15 mm bore iron pipes complete all as specified and as directed.
S&F in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as 'specified and as directed.
S & F in repair pillar tap with cartridge and arearator fancy type CP screwed downhigh pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipes 15 mm dia. Complete all as specified and as directed. Make:- Cera cat part no.F-10130101,Hindware cat part no.F-280011
S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) complete all as 'specified and as directed.
S & F waste coupling of PTMT (half or full threaded) 32 mm dia complete all as 'specified and as directed.
M & L for PVC waste pipe 32 mm dia flexible with cup to fit wash hand basin waste coupling complete all as specified and directed.
Supply and fixing of soap-dish chromium plated all as specified.
Supply and fixing of corner type glass shelf (three peice) incl stainless steel rail all as specified
Supply and fixing of stainless steel towel ring all as specified
Dismantling water tanks & removing to store exc 250 & n exc 500 litres complete all as specified and as directed.
Supply & fixing rotational moulded polyethylene water storage tank - 500 liters (Two layer)capacity (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I incl PTMT float valve 20mm dia complete all as specified and as directed.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as 'specified and as directed.
S&F 75mm bore PVC (SWR) bends any radius complete all as 'specified and as directed.
M&L 75mm bore PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement complete all as 'specified and as directed.
PVC (SWR) vent cowl 75mm complete all as 'specified and as directed.
M & L for rendering 15 mm thick in cement mortar 1: 4 on fair faces of brick work or concrete surfaces, finished even and smooth with out using extra cement, complete all as specified.
M & L for rendering 15 mm thick in cement mortar 1: 6 on fair faces of brick work or concrete surfaces, finished even and smooth with out using extra cement, complete all as specified.
Material & Labour for complete removal of existing treatment incl vegetation, after preparation of existing plaster surface applying Finishing walls with Acrylic Smooth exterior paint two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm etc complete all as specified and directed.
Material & Labour for preparation of new plaster surfaces and applying Finishing walls with Acrylic Smooth exterior paint Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as 'specified and as directed.
M&L for complete removal of existing surface and applying two coats of distemper oil emulsion, white or tinted over 3mm thick wall putty on old wall surface including preparation of surface complete all as 'specified and as directed.
Material & Labour for applying two coats of distemper oil emulsion, white or tinted on new wall surface including preparation of surface over 3mm thick wall putty on complete all as 'specified and as directed.
Material & Labour for applying two coats of distemper oil emulsion, white or tinted on old ceiling surface over a coat of putty including preparation of surface complete all as 'specified and as directed.
Material & Labour for applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as 'specified and as directed.
Material & Labour for applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as 'specified and as directed.
Material & Labour for 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection/ path finished even and smooth with out using extra cement including forming and filling of joints 12mm wide with bituminous filler all as directed at site.
S & F PVC (SWR) bends of any radius with access door bore of pipe 110 mm complete all as 'specified and as directed.
S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 110 mm with PVC clamps and saddles complete all as 'specified and as directed.
Preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water all loose dirt/dust and applying the following Roof Treatment complete all as directed :- (a) Applying 1st course of bituminous primer conforming to IS-3384 @ 0.4 Kg/Sqm over the screed bed. (b) Applying 2nd coarse of a coat of blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm. (c) Applying 3rd course of APP (Atactic Polypropylene) modified prefabricated five layer polymeric membrane 3mm thick weight not less than 3.6 Kg/Sqm with 160 Grams/Sqm non woven polyester made at centre core reinforced laid with 75 mm side overlap and 100 mm end overlap. (d) Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm and blended with fine sand in dry condition @ 0.50Kg/Sqm dusted over the bitumen coat.
(e) Applying a 5th course of Solar Reflective Bituminous Aluminium Paint @ 100 grams/Sqm all as specified and as directed. The membrane shall be laid using butane torch. The membrane shall be first laid upto the parapet wall junction and then shall be overlapped with another membrane (flashing) with an overlap covering upto a distance of 300mm. In case the parapet height is less than 500mm, the membrane shall be terminated at the top of parapet. All rain water pipe openings shall be suitably sealed with APP membrane including disconnection and refixing in same position the existing Water Storage Tanks and all GI Pipes and fittings complete all as specified and directed. Notes : 1. Contractor shall be write "Name of Contractor and Date of Laying of Membrane" with paint on the wall after laying of membrane in all respect. 2. The rate includes for filling of cracks in existing roof with cement putty using suitable bonding agent (Shalocrate-42) before laying cement plaster all as directed.
Removing building materals etc., (other than spoil payable under items 99 to 102 in Section 3-Earthwork) to a distance of 1KM or under, beyond the lead included in the rates, including loading, unloading & stacking at the destination complete all as 'specified and as directed.
SCHEDULE 'A' PART-II (COMPOUND WALL WORK)
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil complete all as 'specified and as directed.
M&L PCC in foundations, filling and mass-concrete type B2 (1:2:4) using 40 mm graded crushed stone aggregate as in post holes complete all as 'specified and as directed.
S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 complete all as 'specified and as directed.
S&F portions framed & hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as 'specified and as directed.
S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap with coach screw & washer in roof, wall etc. of 2mm thick complete all as 'specified and as directed.
Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar complete all as 'specified and as directed.
M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as 'specified and as directed.
M&L rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) complete all as 'specified and as directed.
Material & Labour for painting two coats of Synthetic enamel paint over a coat of primer on steel surface exc 10cm of any description including preparation of new surfaces complete all as 'specified and as directed.
Material & Labour for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth over a coat of red oxide primer when unconnected with other painting or when painted in different tint, including preparation of new surface complete all as 'specified and as directed.
M&L for preparing new plastered surfaces and applying two coats of cement based l paint over a coat of primer complete all as 'specified and as directed.
SCHEDULE 'A' PART-III (INTERNAL ELECTRIFICATION WORK)
Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type all as specified and as directed.
Point wiring for one light point/ fan point controlled by one switch with 1.5 sqmm FRLS PVC insulated unsheathed copper condector single core multi strand flexible cable and 1.5 Sqmm flrs PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including concealed non metallic rigid PVC conduit medium grade with all fittings ( ISI marked ) controlled by one switch including CI/MS sunk box mounting modular switches/sockets & as directed by Engr-in-Charge including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified and directed.
One light point controlled by one switch.
One wall fan/Exhaust fan/ceiling fan point controlled by one switch.
Point wiring for one light point/ fan point controlled by one switch with 2.5 sqmm FRLS PVC insulated unsheathed copper condector single core multi strand flexible cable and 2.5 Sqmm FRLS PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including concealed non metallic rigid PVC conduit medium grade with all fittings ( ISI marked ) controlled by one switch including CI/MS sunk box of 3mm thick plastic laminated sheet required size & as directed by Engr-in-Charge , including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified and directed.
One 3 pin socket outlet point 5 Amps on independent, with cables 2.5 sq. mm size .
One 3 Pin socket outlet point 5 Amps on the same board with cables 2.5 sqmm size.
One 3 pin socket outlet point 15 Amps on independent, with cables 2.5 sq. mm size .
Supply and fix Wall mounted fan complete with blades, hanging accessories, Pull chain control and accessories,1350rpm, 230V, 400mm size sweep Min Air delivery 72CMM air delivery complete all as specified and directed. Make :- Bajaj/Havells/Crompton.
Supply and fixing for energy saving environmental friendly, LED tubelight fittings 20 watts 1200 mm (Aluminium body) long life, impact proof, surface/wall mounting IP 20, 95 luminaries per watt, extruded aluminium housing with frosted PMPA diffuser high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size with ceiling rose complete all as specified and directed.
Supply and fixing for energy saving environmental friendly, LED bulkhead lights fittings 10 watts long life, impact proof, surface/wall mounting IP 65, extruded aluminium housing with frosted PMPA diffuser high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable complete all as specified and directed.
S & F Socket outlet flush universal modular (piano) type 6 pin 6/16 Amps with suitable plate and cover complete all as specified and directed.
S & F Socket outlet flush modular (piano) type 5 pin 6 Amps with suitable plate and cover complete all as specified and directed.
S & F Switch Modular (piano) flush button single pole one way 16 amps with suitable plate and cover complete all as specified and directed.
S & F Switch Modular (piano) flush button single pole one way 6 amps 1 module with suitable plate and cover complete all as specified and directed.
S & F Ceiling Fan step regulator, 120W modular complete all as specified and directed.
S & F ceiling rose surface bakelite 2 to 3 terminals 65 x 50mm complete all as specified and as directed by Engineer-in-Charge.
M & L for sub main wiring with two single core FRLS, PVC insulated, stranded, unsheathed cable copper conductor with size 2X4 Sqmm and drawing through & including Non metallic PVC conduit concealed in wall including earth continuity conductor of size 04 Sqmm PVC insulated unsheathed stranded copper conductor cable and connected to earth dolly to be drawn in 20mm dia rigid non metallic PVC conduit including all tees,bends,elbows,reducers etc & fixing assembly including connecting to main board complete all as specified and directed by Engineer-in-Charge. Note:-Three runs of 4sqmm & one run of PVC conduit shall be considered one unit length.
S & F MCB Distribution board, Single pole & neutral 240 Volt, 2 way, type complete all as specified and directed.
S & F MCB Distribution board, Single pole & neutral 240 Volt, 8 way, type With 200 Amps bus bar complete all as specified and directed.
Supply and fixing LED glass cabinet lights IP 65 display cabinet LED light, 7/10 watt complete all as specified and directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m complete all as specified and directed.
Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm nominal cross section in service connections complete all as specified and directed.
Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 mtr in depth for laying cable etc and getting out in average of soft soil and hard dense soil complete all as specified and directed.
M & L sand cushioning with river washed and screened dry fine sand to under ground cable 23 cm thick, 8 cm below the cable and 15 cm after laying the cable, duly punned complete.
Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete with hard dense soil complete all as specified and directed.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete all as specified and directed.
SP 1 To 25 Amp
SPN 32 to 40 Amp
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor complete all as specified and directed.
Supply and fixing 36 watts recess /pendant mounting ultraslim LED flat panel 2' X 2' made of extruded aluminium frame with high LEDs & glare free opal diffuser IP20 incl taking down old UNSV complete all as specified and directed.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.
Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp complete all as specified and directed.
M & L for wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed as required 2X6 Sqmm copper conductor with 4 Sqmm earth wire lead PVC insulated unsheathed stranded copper conductor cable and connected to earth dolly to be drawn in concealed 20mm dia rigid non metallic PVC conduit including all tees,bends,elbows,reducers etc & fixing assembly including connecting to main board complete all as specified and directed by Engineer-in-Charge. Note:-Two runs of 6sqmm & one run of 2sqmm and one run of PVC conduit shall be considered one unit length.
Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0mm thick buried directly in ground, (Earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 mtr below normal ground level, connected to and including 4 mm dia galvanised earth lead wire by means of bolts, nuts, check nuts and washers of galvanised standard iron or steel all as specified or indicated in electrical plate no 3 of MES Part-I, including testing on completion including the material and labour of the following :- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1 .c) Precast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm. (d) Funnel with watering pipe of GI 20 mm nominal bore medium grade and copper lugs etc all as specified. (e) 15 mm nominal bore light grade GI protection pipe 5 mtr long for protection of earthing lead from mechanical injury or tempering. (f) Requisite quantity of common salt and charcoal. (g) Testing of earthing. Note : (a) On testing after completion of earthing, if the desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk and cost to the entire satisfaction of the Engineer-in-Charge. (b) The contractor shall quote his rate considering taking down cost of existing unserviceable earthing.
Supply, installation, testing and commissioning out door type cubical feeder pillar box outer shell made out of 3.15 mm thick MS sheet inner shell made out of 2 mm thich MS sheet and MS angle section 50x50x6 mm on PCC 1:2:4 type B-1 platform 45cm above the ground level and 30 cm below the ground level, frame factory fabricated with front and back open able double door system complete suitable for 3 phase 4 wire 415 Volt, 50 Hz, Size of panel board- 1.0X0.9X0.5 Mtr, a) TPN, Aluminium bus bar 300 Amps insulated with colour coded heat shrinkable sleeve. b) Incoming MCCB 4 pole 125 Amp 25 KA -01 No Make - Schneider/Legrand/Siemens/ABB c) Out going MCCB TP 63 Amps 16 KA -4 Nos d) Indicator lamps RYB –01 Set .
SCHEDULE 'A' PART-IV (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.
Note: (1) The addn/altn work has to carried out as and when required basis and accordingly site will be available in piecemeal wise and as directed by Enginer-in-Charge of Air Force station Jammu
Rakesh Kumar Malia
M/S MOHAN LAL SHARMA
M/s Sunny Gupta
DES RAJ NAGPAL CONTRACTORS PVT.LTD
INDERJIT SINGH
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .