GEAFU-12/2025-26

Amount

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as spfd.

M&L rendering 15mm thick CM 1:4 on fair faces of brickwork or concrete surfaces finished even & smooth w/o using extra cement using WPC (WPC will be paid and measured separately).

M&L for preparation of newly plastered surface and applying two coats of white wash on ceiling complete all as specified and as directed.

Supply only Liquid water proofing compound complete all as directed.

M&L for preparation of concrete surfaces and applying one coat of concrete floor paints on new/old surfaces complete all as specified and directed by Engr-in-Charge.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground post embedded in cement concrete complete all as specified and as directed.

Excavation in post holes( or similar holes) each n exc 0.5 cum , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in any type of soil,complete all as specified and as directed.

M&L for PCC 1:3:6 Type C-2 (using 40mm graded Agg) as in foundations, filling and mass concrete, complete all as specified and as directed.

Mild steel work for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L for Mild steel round bars 10mm dia and over , cut to length, bent to shape reqd, including cranking, bending for tieing of chain link fencing of Gd.I, IS-432 (Part-I), complete all as specified and as directed.

M&L for Preparation of new steel iron surfaces of any descripotion over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and as directed.

S&F in repairs galvanised. 2 strand, steel Barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails , including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

S&F Welded steel wire fabric (weight n exc 4.00 Kg per sqm metre) fixed to wood or steel members with coach screw or welding work, complete all as specified and as directed.

Dismantling Wrought Iron or Mild Steel works of any description not otherwise provided for, complete all as specified and as directed.

S&F rolled mild steel in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410W (Gde E 250 quality A) complete all as specified and as directed.

S&F Mild steel screw bolts 5 to 10 mm dia of neck (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm and n exc 45cm long complete all as specified and as directed.

Material and Labour for small articles such as clamp, hold fast, wall ties /wind ties , support of valley gutters , support or stays fo rain water , ventilating pipes , including bolts if required etc made of MS flat iron conforming to Fe-290 W ( Gde E-165 ) all as specified and as directed .

Welding in repairs exc 6cm but n exc 10cm in length including necessary arrangements thickness of metal to be welded n.exc 6mm complete all as directed (material required to weld except welding rod like as door spring, door closer, hinges will be supplied by MES) complete all as directed.

Demolition of cement concrete (unreinforced) as in ground floor & paving n exc 15cm thick below or above ground level complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 50mm thick (using 20mm graded aggregate) as in plinth protection finished the concrete surface even and smooth without using extra cement complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and ponted complete all as specified and as directed by Engineer-in-Charge.

M&L for PCC 1:4:8 type D-2 100 mm thick (using 40mm graded aggregate) as in sub base layer, complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed

M&L for except Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade withgrey cement and pigment complete all as specified and as directed

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 Grade with topping of cement mixed with grey cement and pigment complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. complete all as specified and as directed.

M&L for sand cushioning 50mm thick under floor or in foundation including watering and consolidation, complete all as specified and as directed.

M&L for Cement concrete type B-1, 1:2:4 (20 mm graded aggregate) 25mm thickness as in floor for laying tiles, complete all as specified and as directed.

M&L for Outdoor Floor tiles of size 300mmx300mm / 400mmx400mm thickness not less than 10mm set, jointed and pointed in neat cement slurry in floor,laid over and incl 15mm thick cement screed base in CM 1:4, complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 75 mm thick (using 40mm graded aggregate) as in sub base layer, complete all as specified and as directed.

M&L for coloured Chequered cement concrete tiles of size 30cm x 30cm x 25 mm/ 40mmx40mmx25mm thick (with grey cement and colour pigments) set, jointed and pointed in neat cement slurry in floor, laid over and incl 15mm thick cement screed base in CM 1:4, complete all as specified and as directed.

Dismantling plain or corrugated steel sheets, asbestos cement (corrugated, semi corrugated) etc sheets and any type or any description of roof covering, complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel 0.50mm thick of any colour having tensile strength of 550mm as in roof covering/cladding to wall, fixed with self tapping screws / coach screws / J hooks complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel 0.50mm thick of any colour having tensile strength of 550mm as in Ridge / vally gutter / roof covering / cladding to wall, fixed with self tapping screws / coach screws / J hooks complete all as specified and as directed.

Demolition of concrete reinforced (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided complete all as specified and as directed.

Providing precast cement concrete in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain with plain fair faces, including chamfers weatherings throating etc. and setting in mortar complete with joints to match, type B-1 1:2:4(20mm graded aggregate) Set in CM1: 4 complete all as specified and directed.

Formwork for rough finished surfaces of concrete (flat) to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as directed.

S/F mild steel bars TMT 10 mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for coh, .nns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as directed.

S/F mild steel bars TMT 08 mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for coh, .nns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as directed..

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite in single piece complete all as directed.

S&F in repairs 2mm thick Linoleum, plain coloured, laid sealed down with an approved adhesive as in floors including stretching, cutting and fitting complete all as directed.

M&L for cleaning of roofs (metal/concrete) of high rise building such as hangers and gymnasium including removal of all dirt, debris, vegegation and bird droppings using industrial safety harnesses and scaffolding ensuring proper disposal outside the premises as directed by Engr-in-Charge. (Note : Height of non-accessible bldg where work to be executed is upto 25Mtr)

M&L for cleaning of glass panes / glazing wiremesh / skylights of MAP buildings, hangers and gymnasium using approved cleaning solutions, lint free cloths and soft brushes including removal of dirt, stains, cobwebs and bird droppings. Cleaning to be carried out using scaffolding, boom lifts or safety harnesses where required complete all as specified and directed by Engr-in-Charge. (Note : Height of work upto 25Mtr)

S&F in repairs 2/3mm thick fibre glass reinforced translucent plain / corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as directed.

S&F Providing precast cement concrete (Type B0 1:2:4, 12.5mm graded aggregate) louvres and jallies, 25mm thick (measured solid) set in cement mortar 1:4, including all mouldings but excluding frame) complete all as specified and directed.

M&L for providing, cement concrete 1:2:4 type B-1 (using 20mm graded agg) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as directed.

Cutting or uprooting grass, bushes or small trees in interlocking tiles / drains / bldgs / old mud phuska, removing rubbish off the premises, cleaning surface and filling with PCC, filling compound or rendering complete all as directed.

RAJ MOHD (BID ID -3346716)

SHIVAE CONSTRUCTION (BID ID -3346558)

DAVINDER SINGH (BID ID -3344335)

RANBIR ENTERPRISES (BID ID -3347312)

kerni electricals (BID ID -3347045)

TARUN BUILDERS (BID ID -3345748)

APARANA ENTERPRISES (BID ID -3346991)

rajkumar sharma (BID ID -3347326)

ASIA BUILDER (BID ID -3347183)

PARAS RAM ASGOTRA AND SONS (BID ID -3346925)