REPAIR REPLACEMENT OF CERTAIN MAINTANCE WORKS IN OFFRS OFFICE ACCN AND CENTRAL AMINITIES OF HQ MG G AREA UNDER AGE BR CENTRAL AT GE WEST COLABA MUMBAI

Amount

PART- I (B/R PORTION) Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MD land complete all as specified and directed.

M & L for Brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean raddius built in CM 1:6 complete all as specified and directed.

Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land complete all as specified and directed. Note : Height of Bldg Up to fourth floor.

M & L for chiseling old loose spalled concrete from roof ceiling with the help of scrapers, chisel & hammer after that cleaning of rust from mild steel rod and applying cement slurry 3.00 Kg per sqm by paint brush over cleaned surfaces and M & L for 20-50 mm thick ready mix plaster in Multi layer for ceiling on fair faces of brick wall or concrete surfaces, finished even and fair Including three coats of white wash all as specified and directed by Engr-in-charge

M & L for 15 mm thick ready mix plaster in single layer with & including liquid water proofing compound, as per manufacturer's instructions, on fair faces of brick wall or concrete surfaces, finished even and fair, including use of scaffolding, for height of bldgs upto Four stories, complete all as specified and directed.by Engr-in-Charge.

M & L for 12 mm thick Ready Mix Plaster in single layer on other than fair faces of concrete surfaces in wall ( internal surface ) and finished even and smooth without using extra cement, complete all as specified and directed. by Engr-in-Charge. Name of Manufacturer for Item No. 4 to 6: M/s Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd

M & L for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper over a coat alkali resistant primer coat through authorised applicators of paint manufacturers only of approved shade complete all as specified and directed . Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as ap+B29proved by GE complete all as specifeid .

M & L for preparing newly plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings from Ground floor upto 04 storeys height of bldgs bldgs complete all as specified and directed. Make: "Apex Ulitima" of Asian Paints "trucare" Primer / "Weather coat all Guard"of Berger Paints / Dulux weather shield Max of Dulux Paints/Excel top Guard of Nerolac paints as approved by GE complete all as specifeid .

S & F in repairs vitreous china white wash basin flat back size 550 x 400mm excluding taps, waste, chain, and plug and porcelain stopper but including brackets & cutting for and pinning in end of brackets or erecting stand complete all as Specified and directed. Make : Cera/ Parryware/ Hindware, sample as approved by GE

S & F in repairs pillar taps cost copper alloy fancy type with capstan head, chromium plated screwed down high pressure with or fly nuts screwed for 15 mm bore iron pipe and fixed all as Specified and directed. Make : Cera/ Prayag/ Jaquar, sample as approved by GE

S & F in repair Chromium plated brass angle valve for 15mm bore pipe, fixed in repairs complete all as Specified and directed. Make : Cera/ Prayag/ Jaquar , sample as approved by GE

S & F in repair, two way angle valve cock chromium plated brass fancy type bore 15mm complete all as Specified and directed. Make : Cera/ Prayag/ Jaquar sample as approved by GE

S & F in repairs plastic seat cover black/white of pattern W.C including fixing divice and Chromium plated nuts, complete all as Specified and directed. Make : Cera/ Prayag/ Hindware sample as approved by GE. Make : Cera/ Prayag/ Jaquar , sample as approved by GE

S & F in repair vitreous china wash down water closet of Pedestal pattern white including making connection to trap and to flushing pipe etc complete and making good to floor complete all as Specified and directed. Make : Cera/ Parryware/ Hindware sample as approved by GE

S & F in repair CP brass toilet paper holder, superior quality complete all as specified and directed. Make : Cera/ Prayag/ Jaquar sample as approved by GE

S & F in repair CP brass, soap dispenser, superior quality complete all as specified and directed. Make : Cera/ Prayag Cat part N0 BEA-20/ Jaquar sample as approved by GE

S & F in repairs Health foucet including PVC pipe 1.50m long with brass nuts for EWC, fixed in repairs complete all as specified and directed. Make : Cera/ Prayag/ Jaquar sample as approved by GE

S & F in repair PVC flushing cistern 10 ltr capacity with inlet ball valve float and handle and 32mm bore flush pipe including bracket complete all as specified and directed. Make : Cera/ Prayag/ Hindware sample as approved by GE

S & F in repairs PVC connection 15mm dia and 45cm long with 2 Nos PTMT nuts, complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store for 15 mm bore complete all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removal to store for 20 mm bore complete all as specified and directed

S & F UPVC pipes out side dia 16 mm of pressure rating 10 Kgf/Sqcm, fixed to walls, ceilings or in floors etc complete. complete all as specified and directed

S & F UPVC pipes out side dia 20 mm of pressure rating 10 Kgf/Sqcm, fixed to walls, ceilings or in floors etc complete. complete all as specified and directed. Make for Item No. 23 & 24 : Prince/Finolex/Supreme/HIL Limited (Birla Aircon)/Astral

S & F tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floor for 15 mm bore

S & F tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floor for 20 mm bore. Make for Item No. 25 & 26- (a) Tata (b) Swastik (c) Jindal (d) Surya (e) Prakash (f) Indian Tube Company (g) Zenith (h) BST (j) GST (Gujrat Steel Tube)

Refixing old steel tubing and connection in new or old portion (walls ceiling, floors etc) for 15 mm bore complete all as specified and directed

Refixing old steel tubing and connection in new or old portion (walls ceiling, floors etc) for 20 mm borecomplete all as specified and directed

Dismantling, floor hearth or wall tiling inclduing cement mortar bedding and removing rubbish complete all as specified and directed.

M & L for first and premium quality of non skid, ceramic digital “coloured” matt finish joint less tiles of size 300 x 300 x 6-7mm or thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specifed and directed.

M & L for first and premium quality of Glazed ceramic coloured digital polished tiles 600 mm x 300 mm or 405 mm x 250 mm x 6 mm to 7 mm thick, in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.

M & L for Vitrified Ceramic tiles dark or light shade /double charge /ultra charged 600 x 600 x 10-12 mm thick (square/ rectangular) polished, size of each tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M & L for Vitrified Ceramic tiles dark or light shade /double charge /ultra charged 10-12 mm thick cut to size (square/ rectangular) polished, on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles, over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.

M & L for glazed ceramic exterior wall tiles 6 to 8 mm thick etc set & jointed in cement and pointed in coloured cement to match the shade of tile over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified & directed.

M & L for heavy duty outdoor vitrified tiles dark or light shade 14-16 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.16 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. Make for Item No. 30 to 35 : H & R Johnson / Kajaria / Orient Bell, Sample as approved By GE., sample as approved by GE

M&L for 8 mm thick laminate wooden flooring, water resistant, termite resistant,polished flooring is a flating glue less click locked & sealed flooring similar ta a jigsaw puzzle.In this method, the idividule planks are locked on the each other by means of the clicking together but do not attach to the sub floor on which it is being installed, all as specified

S & F in repair Aluminium composite panel sheet 3mm thick PVCF wooden finished of brand name 'Euro bond'/"Alstrong"./ "Viva" fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required cilicon & screw as in ceiling/coloumns and in vertical surface complete all as specified and directed.approved sample as kept in GE Office.

M & L for Granite stone best quality (of any type) tiles 15 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 including dismentling of stone slab complete all as specified and directed

Molding(Sandwitch moulding) of granite slab edges as directed by Engr-in-charge including polishing etc complete

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed.

S & F for Solid PVC wall Lining consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed Make : M/S Rajshri Plastiwood, Indore/M/S Sintex Industries Ltd/M/S Accucell/M/S Dura Plast Extrusion, sample as approved by GE

S & F for 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and directed Make : M/S Rajshri Plastiwood, Indore/M/S Sintex Industries Ltd/M/S Accucell/M/S Dura Plast Extrusion, sample as approved by GE

M & L 4mm thick for E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0 / Cement mortar 1:3 complete all as specified and directed with following:- (a) M & L for Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong) of size 25 x 25 mm. (b) Supply and fixing 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fasteners. (c) Supply and fixing GI powder coated tee as in main & cross members at 595 mm centre to centre supported suspenders along with adjustable camp to maintain level. (d) Supply and fixing E-board ceiling tiles of size 595 mm x 595 mm x 4 mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE Make- 1 Anchor Ceiling Tiles 2 Armstrong 3 Anutone 4 Bison Panel 5 Lagyp 6 Gypboard

M & L 12mm thick for POP ceiling including cornice of POP fixed on anodised snap grid frame work for false ceiling with size of grid 605x605mm consisting of main and cross tee of size 36.5 x 25 x 1.4 mm (wt 0.24kg/RM) and 23.5 x 26.4 x1.4mm (wt 0.191kg/ RM)respectively including aluminum angle 25x25 x4 mm & provn of hangers of GI wire of 2mm dia and providing painting with two coast of synthetic enamel paint over a coat of primer on wooden surface complete all as specified and directed by Engineer-in-Charge.

S & F of 12 mm thick plain toughened glass in doors/ windows framing doors handle, suitable hinges, rubber beading, floor spiring and all necessary fittings complete Including dismantling of old glass any type all as specified and directed. Make- 1 Saint Gobin 2 Asahi 3 Atul Glass Industries 4 Golden Fish 5 Modi Guard 6 Hindustan Pilkington Glass

S & F for powder coated aluminium sections for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame complete all as specified. Note : (i) Glass panes will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading however it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. (iv) Windows all around will be sealed with silicon sealant. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India

M & L for french polishing on new wooden surfaces of any description,width or girth including cleaning and preparing the surfaces and a coat of wood filler with two or more coats complete all as specified and directed..

M & L for french polishing on old wooden surfaces of any description,width or girth including cleaning and preparing the surfaces, with two or more coats complete all as specified and directed..

Taking down wall panelling and similar work, any thickness, any description, including cover fillets complete all as specified and directed.

S & F for 12 mm thick plywood, grade BWP type BB fixed with brass screws and cups to timber frame work complete all as specified and directed : sample as approved by GE. Make- 1 Kitply 2 Century Plywood 3 Archidply 4 Green Ply 5 Anchor

S & F for 2 mm thick veneered designer natural wood grain sheet fixed with adhesive as per manufactrue instruction to plywood work complete all as specified and directed : sample as approved by GE. Make- 1 Novapan 2 Eco Board Industries, Pune 3 Kitply 4 Anchorlam 5 Century Plywood

S & F for Plain fillets of first class hard wood, square or rectangular in section, clean sawn, wrought, secured with nails or brads; sectional area exceeding 6 Sqcm but not exceeding 13 Sqcm complete all as specified and directed. sample as approved by GE

S & F for decorative fillets of Ist class hard wood, secured with nails or brads; sectional area exceeding 3 Sqcm but not exceeding 6 Sqcm complete all as specified and directed. sample as approved by GE

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete.

Dismantling timber scantlings 40 Sqcm and over in section, in unframed work in any position complete.

S & F for Rolled mild steel sections conforming to Gde Fe-290(Gde-165-E) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified.

M& L for multi-rib TM profile high tensile 550 MPA yield strength colour coated galvalume corrugated steel sheet having maximum pitch of 250mm, c/c and minimum 30mm crest depth in length as per site requirement. The feed material is to be manufacture out of 0.50mm (TCT). Total coated thickness with 18-20 microns top coat over 5 microns primer and 8-10mm alkyd backer, zinc aluminium alloy of AZ-150. The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%)and silicon (1.5%) with ttoal mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self capping screws with EDPM seal or fixed with 'L' or 'J' type or cranked hook bolts in roof,complete all as specified and directed by Engr-in-charge.

M&L for multi-rib TM profile high tensile 550 MPA yield strength colour coated galvalume plain steel sheet having maximum pitch of 250mm, c/c and minimum 30mm crest depth in length as per site requirement. The feed material is to be manufacture out of 0.50mm (TCT). Total coated thickness with 18-20 microns top coat over 5 microns primer and 8-10mm alkyd backer, zinc aluminium alloy of AZ-150. The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%)and silicon (1.5%) with ttoal mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self capping screws with EDPM seal or fixed with 'L' or 'J' type or cranked hook bolts in roof,complete all as specified and directed by Engr-in-charge. Make for Item No. 57 & 58- (i) TATA (ii) JSW (iii) ESSAR (iv) HINDALCO (v) INDALCO (vi) ASSOCIATED PROFILES AND ALUMINIUM LT

Taking down existing wall finishes any type by vigorously wire brushing, brooming dusting & finally washing with water to clear the surface absolutely free from any kind of existing finishes & foreign mtrls making good minor cracks etc in cement mortar 1:3 and applying putty 2 kg per sqm (Birla putty) on the surface with uniform thickness making surface absolutely smooth & applying two coat of distemper oil emulsion paint white or tinted over priming the surface with al-kali resistance priming paint complete all as specified and directed. Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as ap+B29proved by GE complete all as specifeid .

Taking down existing wall finishes any type by vigorously wire brushing, brooming dusting & finally washing with water to clear the surface absolutely free from any kind of existing finishes & foreign mtrls making good minor cracks etc in cement mortar 1:3 and applying putty 2 kg per sqm (Birla putty) on the surface with uniform thickness making surface absolutely smooth & applying two coats of exterior emulsion paint white or tinted over priming the surface with al-kali resistance priming paint complete all as specified and directed. Make -1. Berger Paints- Weather coat All guard 2. Asian Paints Ultima Protek

Taking down existing wall finishes any type by vigorously wire brushing, brooming dusting & finally washing with water to clear the surface absolutely free from any kind of existing finishes & foreign mtrls making good minor cracks etc in cement mortar 1:3 and applying putty 2 kg per sqm (Birla putty) on the surface with uniform thickness making surface absolutely smooth & applying two or more coat of texture finish paint as per design approved or tinted over priming the surface with al-kali resistance priming paint complete all as specified and directed. Make - 1 Nerolac 2 Berger Paints 3 ICI India 4 Asian Paints

Supplying and fixing factory made single extruded UPVC Frames/Chowkhat comprising of 60 MM X 58 MM size applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Make : M/S Rajshri Plastiwood, Indore/M/S Sintex Industries Ltd/M/S Accucell/M/S Dura Plast Extrusion, sample as approved by GE

M&L for 3 mm thick acrylic solid surface corian table top sheet fixed with admixure and as per manufacture instruction all other similar works complete including dismantling of any type table top all as specified and directed shape and design approved by GE.

S & F 60 micron designer wall adhesive as per manufacturer's instructions complete all as specified and directed by GE.

PART II (E/M PORTION) S & F Sub main wiring in repair, with two run of 16 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 16 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduite of adequate size (not less than 32 mm dia) for housing the wires for from Pannel / Main DB to house SPN DB, along with takingdown old unsv submain wiring complete all as specified & as directed by engr-in-charge. Make : Finecab / Havells / Finolex as approved by GE Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 16 sqmm cable and one run of 16 sqmm cable with PVC conduite shall be measured as one length along with taking down old unsv submain.

S & F Sub main wiring in repair, with two run of 10 sqmm stranded copper conductor FRLS wire with one run of 10 sqmm stranded copper conductor as earth continuty conductor connected to common earth dolly including PVC FR heavy duty conduite of adequate size (not less than 25 mm dia) for housing the wires from TPN DB to TPN's along with takingdown old unsv submain wiring complete all as specified. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 10 sqmm cable and one run of 10 sqmm cable with PVC conduite shall be measured as one length.

S & F sub main wiring (Concealed type) in repair, for AC Point with two run of 4 sqmm stranded copper conductor wire (FRLSH) with one run of 4 sqmm stranded copper conductor as earth continuty conductor connected to common earth dolly including adequate size and including rigid non-metallic PVC heavy duty conduit (ISI mark), 19/ 20 mm dia suitable size including cutting chases for conduits complete all as specified, including taking out of old U/s sub main wiring of any size Note: Mode of measurement two runs of 4 sqmm cable and one run of 4 sqmm cable shall be measured as one length. Make of Cable for Item No. 64 to 66 : Anchor / Havells / Polycab/ finolex

Taking down U/S point wiring including fixtures complete all as specified and directed.

M & L for Point wiring with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing caping (ISI mark) of adequate size with all fittings and accessories including with and fix conecaled 1.2 mm thick pressed steel sunken box and with including moduler cover plate and frame, suitable for fixing moduler switch/socket of different modules and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I complete for one light point / bell/ Ex Fan / wall fan controlled by one modular switch, 1 way 6/10 amps, 1 module along with taking down old unsv point wiring complete all as specified and directed. Make of Cable : Anchor / Havells / Finolex / Polycab Make of PVC Casing Caping- Precision/ Modi/Presto Plast/ Supreme/ Polycab/ Plaza/Pressfit

Ditto all as per item No.69 above but One bell point controlled by one bell push.

Ditto all as per item No.69 but One ceiling fan controlled by one switch & regulator

Ditto all as per item No.69 but One Exhaust fan / Wall fan controlled by one switch.

Ditto all as per item No.69 but One 3 pin socket point 5 Amps on independent board

Ditto all as per item No 69 but One 3 pin socket point 5 Amps on same board

Ditto all as per srl item No 69 here-in-before but for one socket point 15 Amp with 2.5 sq mm PVC unseathed FRLSH wire along with 2.5 sq mm green colour wire as earth contuinity conductor connected to common earth dolly complete all as specified and as directed.

S & F modular switch, one way 6/10 amps, one module complete all as specified and as directed.

S & F modular socket outlet, in repair, 2/3 pin combined, 2 module, 6/10 amps complete all as specified and as directed

S & Fmodular switch, one way 16/20 Amp, one module, in repair, complete all as specified and as directed

S & F modular socket outlet, 2/3 pin combined, 2 module, 16/ 20 Amp, in repair, complete all as directed.

S & F modular type fan step regulator, 120/ 280 volts, 2 modulein repair, complete all as directed.

S & F modular bell push, in repair, 6 Amp complete all as specified and as directed.

S & F Bell ding dong, in repair, AC, 230 volts, single pole complete all as specified and as directed.

Supply & Fix ceiling rose in repair, surface bakelite 65 x 50 mm two to three terminals complete all as specified and as directed. Makes for item No. 76 to 83 : Anchor Penta / Fine / SSK as approved by GE

S & F surface mounted 10 watt, 6500K, LED tube light fitting in repair, mirror light fitting with lamp fixed including on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed Make: Wipro model no Wipro Garnet 10 W aluminium LED Batten light 6500K, D531065 / Havells LED Pride Plus 10W 6500K / Philips model No - BN150W LED10S-6500 PSE OD GR

S & F 20 watt LED, 6500 K, in repair, 4 feet long fixed including on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed Make: Wipro model no Wipro Garnet 20 W aluminium LED Batten light 6500K, D560565 / Havells LED Pride Plus 22W 6500K / Philips model No - BN150W LED20S-6500 PSE OD GR

S & FLED 36 Watt fitting in repair, minimum 110 Lumin per Watt, recessed mounted, full glow, slim type, of size 60 cm x 60 cm square type, with electronic driver of same make connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0 20mm and necessary fixing arrangement complete all as directed. Make - Havells (Cat part No - ENDURASLIMPROPLUS2X2 PLR36WLED840MOD) or equivalent model of Wipro Model No LM25-361-XXX-65-G1** / Philips Model No - RC380BLED 34S-6500 L60W60PSDOD-51

S & F LED 12 Watt recessed mounted circular downlighter fitting in repair, 110 Lumin per Watt, decorative type, with electronic driver of same make connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0 20mm and necessary fixing arrangement complete all as directed. Make : Havells, Cat Part No : EDGEPRORDDLR12WLED840S or equivalent model of Wipro Model No LD90-141-XXX-65-XX* / Philips Model No -DN393B LED12S-6500 PSUWH

S & F LED 16 Watt round slim panel type recessed mounted fitting, 110 Lumin per Watt, 6500K/3000K, with electronic driver of same make connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0 20mm and necessary fixing arrangement complete all as specified and directed by Engineer-in- Charge. Make : Wipro Model No D821665 or equivalent model of Havells, Philips.

S & F LED 5 Watt recess mounted circular moveable type with 180 degree angle downlighter fitting, in repair (3000 K, Warm White colour ), slim type, 110 Lumin per Watt, decorative type, with electronic driver of same make connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0 20mm and necessary fixing arrangement complete all as specified and directed by Engineer-in- Charge Make: Havells Cat Pat No- SPARKLEPROADJDLR8W830MOD40D / Wipro/ Philips-Cat Pat No DN311BLED6S-4000PSUMBWH

S & F LED 24 Watt square slim panel type recessed mounted fitting, 110 Lumin per Watt, 6500K/3000K, with electronic driver of same make connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0 20mm and necessary fixing arrangement complete all as specified and directed by Engineer-in- Charge. Make : Wipro Model No D821685 or equivalent model of Havells, Philips.

S & F/ lay cable in repair PVC insulated screened PVC bedded, unarmoured, sheathed, electric power cables 1100 volts grade with stranded copper conductor of size 2.5 Sqmm 3 core with non metalic PVC FR, heavy duty conduit of suitable size (20mm dia or more), with shaddle complete all specified and directed Note: Mode of measurement 3 core cable with PVC conduite shall be measured as one length for connecting all building street lights around the building. Make-:(i) Havells (ii) Finolex (iii) Nicco (iv) Plaza (v) Anchor (vi) Polycab (vii) RPG (viii) GLOSTER (ix) RR Kabel (x) KEI

S &F Modular type AC Box, 4 Module with Socket and 25 Amp SP mini MCB in plastic box enclosure along with cover plate and top complete all as specified and directed. Make : Anchor Model No : 98498 or equivalent model in Havells/ Legrand.

S & F 4/6 Module Plexo Distribution Board having provision to fix FP MCB/ Isolator /RCCB /RCBO as incomer, IP 65 rating fixed on wall duly grouted in solid block wall in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed.

S & Fsheet metal enclosures in repair, double door, for DBs when MCBs to be used 240 volts 8 way with 200 Amps rated bus bar single pole and neutral fixed on wall by cutting chasing and making good to the disturbed surfaced board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed.

S & Fsheet metal enclosures in repair, double door, for DBs when MCBs to be used 240 volts 12 way with 200 Amps rated bus bar single pole and neutral fixed on wall by cutting chasing and making good to the disturbed surfaced board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed.

S & F MCB SP in repair, 240 volt, 6 to 32 Amps, C series, complete all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB

S & F MCB SPN in repair, 240 volt, 40 to 63 Amps, C series, complete all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB.

S & F MCB TPN/FP in repair, 415 volt, 32 amps, C series, complete all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Makes for item No. 93 to 98 : Havells / Legrand / Schneider / Indo Asian sample as approved by GE.

Supply & Fix non-metallic PVC casing capping of size 25X12mm dia (for fixing the telephone cable and lan cable, etc)

Supply & Fix non-metallic PVC casing capping of size 25X12mm dia (for fixing the telephone cable and lan cable, etc)

S & F Modular PVC Box 6" X 8" along with fixing 02 X circular red and 02 X green panel type indicators, and connecting to supply by 3 core wire complete all as specified and directed. Makes for item No. 99 to 101 : Precision/ Modi/Presto Plast/ Supreme/ Polycab/ Plaza/Pressfit

RAJENDRA CONSTRUCTION

SN CONSTRUCTION

Shetty Construction Co

ROHIT CONSTRUCTION

SHREE JAGDISH FURNITURE CO.