Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.2 LAccepted-AOC P 45 JOGENDRA GARDEN KOLKATA 700078 | KOLKATA | WEST BENGAL | 700078 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹36.2 L+₹1.4 L (3.93%)Rejected-Finance B4 60 1 NEW SANTOSHPUR THANDER PARA STATION ROAD 24 PARGANAS SOUTH PIN 700142 WB | 24 PARAGANAS SOUTH | WEST BENGAL | 700142 | L2 | Rejected-Finance Being higher bid value | |
| 3 | L3₹36.3 L+₹1.5 L (4.33%)Rejected-Finance 38 BAGUIATI ROAD KOLKATA 700059 | 24 PARAGANAS NORTH | WEST BENGAL | 700059 | L3 | Rejected-Finance Being higher bid value | |
| 4 | L4₹36.4 L+₹1.6 L (4.70%)Rejected-Finance ROOM NO B 111 PART III GANESH MURTINAGAR CAPT PRAKASH PETHE MARG CUFFEPRADE CALABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L4 | Rejected-Finance Being higher bid value | |
| 5 | L5₹36.6 L+₹1.8 L (5.12%)Rejected-Finance SHIVSHAI PUNARVASAN PRAKALP BLDG NO 10 ROOM NO 115 MAHARASHTRA NAGAR MANKHURD E MUMBAI 400088 | MUMBAI SUBURBAN | MAHARASHTRA | 400088 | L5 | Rejected-Finance Being higher bid value |
Tender Value
₹34.1 L
EMD Value
₹68,300
Closing Date
10 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ALIPORE KOLKATA
NO 1 NATIONAL LIBRARY AVENUE, ALIPORE, KOLKATA 700027
ADDN/ALTN IN GUARD ROOM NEAR GATE NO 1 AND 2 AT BSA UNDER GE ALIPORE KOLKATA
2023_MES_602863_1
GE/ALP (8197B) KOLKATA OF 2023-24
Open Tender
Civil Works
Item Rate
120 days
GE ALIPORE KOLKATA
Class D and category a (i)
9 documents required · 9 mandatory
₹500
GARRISON ENGINEER ALIPORE
₹68,300
Yes
GE ALIPORE KOLKATA
10 Oct 2023
12 Jun 2023
18 Jul 2023
12 Jun 2023
10 Jul 2023
26 Jun 2023
12 Jun 2023 - 19 Jun 2023
20 Jun 2023
Amount
Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc complete (upto four storiey bldg) all as specified and as directed.
Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.
Taking down of steel window with guard bar complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each and removing from site complete all as specified and directed.
Demolition of cement concrete in ground floor and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of brick work built in cement mortar including all quions, arches, pillers etc complete all as specified and directed.
Dismantiling of floor hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises (out side of MOD land), complete all as specified and directed .
Demolition of reinforced Cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (upto four stories bldg) complete all as specified and directed.
Dismantiling of asbestos cement ( corrugated,semicorrugated, etc ) sheet in roof coverings and rubbish off the premises (out side of MOD land), complete all as specified and directed.
Dismantling of timber scantling 40 sq.cm and over in section, in any postion framed work completed all as specified and directed.
Dismantling of timber scantling in fillet, rails, posts, rafters, purlins, etc under 40 sq.cm in section,framed work in any position completed all as specified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) of insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.
Dismantling wrought iron or mild steel works of any description not otherwise provided for complete all as specified and directed.
Excavation in trenches not exc 1.5 mtr wide and not exc. 1.5 mtr deep for foundation in soft/loose soil & getting out complete all as specified and directed.
M&L for anti-termite treatment to treating the bottom and sides of excavation at the rate of 5 ltrs/sqm of emulsion of surface area complete all as specified and directed.
M&L for cement concret(1:4:8), type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.
Material and labour for brick work with sub class 'B' bricks straight or curved on plan or any radius in half brick work built in CM (1:4) complete all as specified and as directed.
M&L for hardcore of broken stone gauge n. exc 63mm, deposited, spread and leveled in layers n. exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
Material and labour for rendering 15mm thick in CM (1:4) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement (upto four storie bldg) complete all as specified and directed.
Material and labour for 15 mm thick cement plaster (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement (upto four storey high bldg) complete all as specified and directed.
M&L for 25mm thick damp proof coarse in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregrate to horizontal or vertical surfaces including necessary form work complete all as specified and directed.
M&L for 75 mm thick PCC (1:4:8), type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.
Material and labour for glazed ceramic tiles of size 450x300x7-8mm thick in verticle surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed.
Material and labour for non-skid ceramic coloured floor tiles as in floor 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and as directed.
M&L for 25mm thick PCC (1:2:4), type B-1 (using 20mm graded stone aggregate) as in bedding of tiles/kota complete all as specified and directed.
M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles n. exceeding 0.36 sqm over including 15 mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
All as per item no 27 above but in skirting ,dado etc over and including 10 mm thick cement plaster in CM (1:4) complete all as specified and directed.
Material and labour for framed work for ornamental and intricate design such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-16.
Supply and fixing for powder coated aluminium sliding windows sliding on 3 tire frame of section 92mmX30mm X1.55mm and shutters of section 20mm X40mm X1.55mm fixed with 5mm thick coloured sheet glass/wiremesh with rubber gasket , handel lock, 'U' channel with including with all fittings etc complete all as specified and directed.
Supply and fixing for stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel staples in steel/wooden /aluminium frames (upto four storied bldg) complete all as specified and directed.
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15mm bore of pipes all as specified and directed.
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 20 mm bore of pipes all as specified and directed.
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 25 mm bore of pipes all as specified and directed.
Supply and fixing in repairs unplasticised PVC 15mm bore pipe of pressure rating 6 kgf/cm2 with all fittings fixed complete to wall and ceiling or laid in floors in short length complete all as specified and directed.
All as per item No 35 here-in-before but 20 mm bore.
All as per item No 35 here-in-before but 25 mm bore.
M&L for cutting chases, pinning, in making good to facing where required of of brick wall and pointing in cement motrar (1:3) to ends and cutting chases for concealed water tubing and concealed conduit wiring ete and making good surfaces complete all as specified and directed.
Supply and fixing in repair 15mm bore bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.
S&F in repair 15mm bore bass CP angular stop cock concealed type with crutch or butterfly handle complete all as specified and directed .
Supply and fixing in repair for 15mm bore stop valve, concealed type brass chromium plated, screwed down high pressure with crutch or butter fly handle screwed both ends fixed to GI pipe complete all as specified and directed.
Supply and fixing in repair for 15mm bore chromium Plated pillar tap fancy type cast copper alloy, with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.
S & F in repair brass chromium plated shower rose 125 mm size including fixing to steel pipe or union complete all as specified and directed.
M&L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L for anodised aluminium snap grid frame work for false ceiling Tee section (15mm x 30mm), cross tee section (15mm x 23mm), wall angle (20mm x 20mm) with grid size (60 x 60cm) all as specified and directed .
M&L for hanger 6mm dia GI (upto 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flate 40x3 mm size, 60 mm long and expansion hold fasteners 12.5 mm dia. 40 mm long complete all as specified and directed.
M&L for 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.
S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping srews complete all as specified and directed.
S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall for rain water pipe ,fixed with self tapping srews complete all as specified and directed.
S&F for MS Plates (plaines or chequered) square cut or notched (forming holes with riveted,bolted attechment) 300x300x8mm at bottom & 200x200x8mm at top GDE Fe 410-S complete all as specified and directed.
S&F for steel work in tabular truss and tubelar post including special shaped washer etc .complete using ERW or induction butt welded tubes conforming IS:1161-1979 grade St-240 complete all as specified and directed.
S&F for MS rolled section as in roof purlins, rafters and truss etc of MS pipe fixed with iron cleats along with nuts & bolts of required size or section or welded conforming to Fe-290 Gde E-165.
S & F for MS screw bolts (machine made) exc 5cm but n exc 10 cm with hexagonal or square heads at one end and screwed the other,or screwed both ends,each screwed end to be fitted with washers and one hexagonal or square nut,complete all as specified and directed.
supply and fixing in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and directed.
S&F in repair vitreous china squatting pan of orissa pattern long pan of size 580 mm x 440mm with integral foot rest white with cast iron P to S trap with back inlet including flush pipe of suitable length to connection with existing cistern & make good complete all as specified and directed.
supply and fixing in repairs vitreous china wash basin ( white), flat back, size 580 x 450 mm including CP waste coupling 32mm dia excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and directed.
S&F for 1000 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed including taking down old uncervicible tanks and removing to store complete all as specified and directed. .
S&F for PVC water tank lid for 500/1000 ltrs capacity complete all as specified and as directed.
S&F for 20 mm dia gun- metal, globe or gate valves pipe with iron wheel head,screwd both ends for iron pipe and fixed complete all as specified and directed.
S&F for stainless steel kitchen sink 1mm thick with plug, waste pipe. Washers including cantilever cast iron brackets, connecting union etc over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete with fixing accessories and fixed in position complete all as specified and directed.
S&F in repair of brass CP mixer valve cock for mixing hot & cold water screwed down for iron pipe 15 mm dia including telephonic shower complete all as specified and directed.
S&F in repair for vitreous china urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass scews, ponting around urinal back in cement; including connection to flushing pipe and outgoing pipes all complete as specified and directed.
S&F for 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified and directed.
Supply and fixing in repair 32mm dia flexible PVC waste pipe for basin etc complete all as specified and directed
Material & labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
Material & labour for preparation on new plastered surfaces of wall and applying two coats of anti-algae and anti-fungal exterior grade weather coat paint over a coat of primer (upto four storey bldg) complete all as specified and directed.
Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer (upto four storey bldg) complete all as specified and directed.
Material and labour for preparation of old decorated surfaces of wall and applying one coat of oil bound distemper (upto four storey bldg) complete all as specified and directed.
Material and labour for preparation of old decorated surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds,etc and applying one coat of anti-algae and anti-fungal exterior grade weather coat paint (upto four storey bldg) complete all as specified and directed.
S&F for 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and directed.
S&F for 75mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and directed.
S&F for 110mm bore PVC(SWR) pipe bend single socket complete all as specified and directed.
S&F for 110mm bore PVC(SWR) pipe bend single socket complete all as specified and directed.
S&F for in repair CI Nahani trap of 100mm dia, including jointing to waste pipe fixed in cement concrete, (1:2:4) type B1 ( using 20 mm graded crushed stone aggregate) complete all as specified and directed.
S&F for in repairs CP grating of 100mm dia, fixed with cement mortar (1:3). complete all as specified and directed.
M&L for machine cut cuddapa stone slab 20 mm thick over and including cement screed (1:6) base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete as specified and directed.
M&L for granite slab 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, walls, window- cills, cooking platforms over and including screed bed/plaster 15 mm thick in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
Supply and Fix for curtain rods decorative aluminium alloy with fixing brackets including taking down old pelmet box making good on wall complete all as specified and directed. (upto 4 storey of building)
Supply and Fix for bracket decorative type for curtain rods aluminium alloy complete all as specified and directed. (upto 4 storey of building)
Supply & fix for 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamferred put together with Glue, pinned at joints complete all as specified and directed.
Supply & fix for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F for 35mm thick 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc (wihout sash bars), edge of framing plain, chamferred or rounded, fitted with cut and mitred beads for securing glass etc sizes of memebers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.
Material & labour for PCC 1:3:6 ,type C1 (using 20mm graded stone aggregate) as in bed blocks for hold fasts including making good or disturbed portion with plaster to match with existing surface complete all as specified and directed.
S&F for solid PVC moulded door frame of size 50mm x 47mm made out of 5mm moulded/printed PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & drawing complete all as specified and directed. (upto 04 storey of building)
S&F for factory made solid panel PVC Moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face complete all as specified and directed.
Supply & fix for 100mm long butt hinges medium weight, cold rolled mild steel complete all as specified and directed.
Supply & fix for 150 mm long aluminium anodised , barrel tower bolts of extruded section complete all as specified and directed.
Supply & fix 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F for 300mm by aluminium alloy anodised sliding door bolts and hasp and staple (Bolt type) and fixing clips of sheets cast or extruded sections and fixing bolts and sliding bolts or extruded section of cast aluminium alloy
M&L for preparation of new or previous untreated wood and wood based surfaces of any description over 10 cm girth or width not otherwise described and applying two coats of synthetic enamal paint over a coat of pink primer complete all as specified and directed.
Returning, filling in trenches including spreading leveling and well ramming with water complete n.exc 25 cm thick in each layer in soft/loose soil complete all as specified and directed.
Removing exavated soild n.exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point.
M&L for precast cement concrete (1:2:4), type B-1 (using 20mm graded stone aggregate) as in cover slab, shelves, and similar work set in CM (1:4).complete all as specified and directed.
M&L for mild steel TMT bars 8 to 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
M&L for 80mm thick machine preesed precast concrete glazed interlocking paver block any shape and size over sand/stone dust cushion conforming to IS 15658-2006 of M-40 Grade with grey cement and pigment complete all as specified and directed .
M&L for 60mm thick machine preesed precast concrete glazed interlocking paver block any shape and size over sand/stone dust cushion conforming to IS 15658-2006 of M-35 Grade with grey cement and pigment complete all as specified and as directed .
M&L for sand for cushion below paver block for levelling complete all as specified and directed.
M&L for coloured rubber polished chequered tiles with grey cement and no pigment 30cm x 30 cm x 25mm thick , over and including15mm thick screed bed in CM 1:6, set jointed and pointed in neat cement slurry in floors complete all as specified and directed.
S&F for 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and as directed .
Taking down carefully copper/aluminium point wiring (light,fan,socket etc.) complete including fittings such as switch, ceiling rose, light fittings, regulators etc. and making good to the disturbed surface of walls, floors etc. complete all as specified and directed.
M&L for point wiring for one light/ bell/ fan controlled by one number one way switch complete with 1100 V grade FRLSH PVC insulated multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through and including PVC concealed conduit pipe of suitable size minimum 20mm dia medium grade ISI Marked complete with one run of 1100 V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly including provn of MS sheet pressed sunken box not less than 1.12 mm thick concealed on wall, with 3 mm thick laminated sheet top cover ISI marked (Make: Hylum/Anchor/Orient) for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed. Note : Proper colour code of wiring to be maintained.
All as per item No. 102 here in before for 5 Amps socket on same board complete all as specified and directed.
All as per item No. 102 here in before but for 5 Amps socket point on independent board complete all as specified and directed.
All as per item No. 102 here-in-before but for 15 Amps socket point independent with 2.5 sqmm 1100V grade FRLSH PVC insulated copper conductor complete all as specified and directed.
S & F for piano switch flush type single pole one way 5 Amps, 230 V.
S & F for socket flush type, 2 in 1 multipurpose, 6 Pin, 5 Amps and 15 Amps
S & F for socket flush type 2 in 1, 5 Pin, 5 Amp. .
S & F for switch piano flush type, single pole one way 15 Amps, 230 V.
S & F for call bell musical door chrome AC 230 volts single pole (Ding dong Type)
S & F for electronic Ceiling fan regulator (2 Module stepped type) flush type suitable for 230 V AC.
S & F for ceiling rose, 3 terminal, PVC/ polycarbonate isolated body, 230 V.
Taking down and refixing of LED tube light after repair/replacement of point wiring complete all as specified and directed.
S & F for in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with inbuilt driver, suitable for roof ceiling including connecting up with driver three core flexible copper conductor wire of suitable size complete all as specified and directed . Make : Crompton , Cat No. : LCTLRNE-36-FO-CDL Havells (CAT No- VENUSNEOHE4x1PLR36WLED8576)/ Philips(CAT No- RC38BBLED36S-6500PSUOD WHPIR)/MAGIK (CAT NO-PCAC036N2016)
S & F for LED mirror light fitting wit high out put diffuser 2 feet, 10 watt 220 V AC decorative type with inbuilt driver and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed . Make- Magik (Cat No- BWMP010C)/ Crompton (Cat No- CCS-103-10-65-SL-DP-NWH)/Havells(Cat No- LUMILINE BS10WLED865SPCWH)
S & F for LED light fitting 1x9W/1X10W spare bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F for LED tube light fitting 4 ft 20 watt, 230 volt energy efficient comprises of extruded PVC housing, with inbuilt driver and PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.all as specified and directed.
Supply and fix as in repair SPN MCB DB 12 way with Amps rated copper bus bar, neutral link, suitable for mounting MCB's 240 volts double door type and making good the disturbed surface complete all as specified and directed.
Supply and fix as in repair MCB 06 Amps to 32 Amps, single pole, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed .
Supply and fixing in repair MCB 06 Amps to 32 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and directed
M & L for making hole on wall for exhaust fan of size 300mm and making good distrubed surface complete all as specified and directed.
Supply and fix for light duty exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers Make- Crompton( DRIFT AIR PLUS METAL)/ USHA( AEROCLEAN LD GBD)/HAVELLS(VENTIL AIR-DB NEO/DB)
S& F for 32 W ceiling fans complete with blades, down rods, without remote and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) including taking down old one. Make- Crompton(ENERGION)/USHA(TECHNO AIR)/HAVELLS (HAVELLS Efficiencia Neo)
S & F for electric water heater,storage type PVC body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.Make- Crompton ( ASWH1 3525)/HAVELLS (GHWAHPSWH025)/PRAYAG(BROMO-25)
Supply and laying for under ground heavy duty XLPE insulated, armoured aluminium conductor cable 1100 volts grade, cross-sectional area 10 sq. mm 4 core in trenches /clamped on wall through pipe in road crossing / plinth/ drain/ duct/ floor along pole / wall /ceillings etc complete all as specified and directed. Note:- Earth work, bricks protection, sand cushioning shall be measured and paid seperately.
S&F for 40mm bore GI, galvanised "light grade" with all fitting and fixed complete to walls and ceilings or laid in floors or laid in trenches complete all as specified and directed
Cutting existing metal/bituminus road/PCC walk way/any type of tile works n.exc 0.45m width and n.exc 0.90 m in depth including all connected earth work and making good disturbed surfaces matching with the existing specification and finish including disposal of surplus material to a distance n.exc 50m complete all as specified and directed.
Materials and labour for earthing as in repair complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of size 32 x 6mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded stone aggregate ), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion complete all as specified and as directed.
DGR CONSTRUCTION
MODERN AGENCY
M/S SRINIVASA CONSTRUCTION
AZIM ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .