Constt of CSC near Eidgah at Sarman Panla

Amount

Earth work in excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m in all kinds of soils

Providing and laying in position cement concrete (1:5:10)mix in foundation &plinth using 40mm Nallah stone aggregate excluding shuterring including all leads and lifts complete

Random rubble masonary in 1:6 cement:sand mortar in foundation and plinth with hard stones but without bond stones including cost of stones and levelling of top with 1:6:12 cement:sand :stone aggregates with all carriages complete.

Dry Random rubble masonary with hard stones but without bond stones including cost of stones with all carriages complete.

Random rubble masonary in 1:6 cement:sand mortar in Superstructure with hard stones but without bond stones including cost of stones and levelling of top with 1:6:12 cement:sand :stone aggregates with all carriages complete.

Providing and laying in Reinforced position cement concrete of specified grade excluding the cost of centring and shuttering .All work in Upto plinth etc. . 1:1.5:3 mix

Providing and laying in Reinforced position cement concrete of specified grade excluding the cost of centring and shuttering .All work in beams, slabs, suspended floors etc. . 1:1.5:3 mix

Reinforcement for RCC work including straightening,cutting bending, placing in position and binding all complete upto plinth level Thermo Mechanical Treated bars

50mm thick cement concrete flooring of specified grade excluding the cost of centring and shuttering .All work up to plinth level . 1:2:4 mix

Filling of available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers ic all leads and lifts complete.

P/F of 1mm thick MS sheet door with frame of 40x40x6mm angle iron and 3mm MS gusset plates at the junctions and corners with all fittings and welding complete with a priming coat.

Painting with readymixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade on new work.

Providing/fixing on wall face un-plasticide Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring leaving 10mm gap for tthermal expansion 75mm diameter pipes.

Providing/fixing strips in joints of terrazzo cement concrete floors, glass strips 40mm wide and 4mm thick.

P/F of angle iron frames for doors, windows, ventilators of size 35x35x5mm with all fittings and welding complete with a priming coat.

Structurall steel work in built up sections made of angles, channels, flats etc. welded and jointed in position all along with a priming coat complete work.

P/F of 15mm nominal bore C.P. brass Bib cock of approved quality.

P/F of 20mm PVC pipes of approved quality with all fittings complete.

P/F of 15mm nominal bore C.P. brass Angle Valve of approved quality.

P/F of ball Valve of approved quality.

P/F of PVC connections of approved quality.

Construction of Masonary chamber of 30x30x50CM inside in brick work in cement mortar 1:4 mix.

P/F on terrace polyethylene water storage tank with cover and suitable locking arrangment of standard make all fittings complete.

P/F of 100mm PVC pipes of approved quality with all fittings complete.

P/F of Indian type water closet squatting pan (580x440mm) with 100mm sand cast iron P or S trap and cistern of approved quality.

P/F of wash basin of approved quality with all fittings complete.

Centring and shuttering including strutting propping etc. and removal of form for :-Suspended floors, roofs etc.

Edges of Slabs etc.

Provision for Citizen Information Board

YASAR ARFAT

SHAFIQ AHMED RUNYAL