Transportation, installation, necessary fabrication, commissioning trial run of one no. 1000mm width, 2X150KW, 6.6KV, dual drive belt conveyor along 72L from 8D to 28D in R-VII seam at 3n4 Incline, J.P.Colly

Amount

Part A:Transportation of the 1000mm width, 2X150kW, 6.6kV, double Drive Head unit Complete with Drive Drum, Driven Drum, Gear Box, Motor, Couplings, Bearing Blocks, baseplate, fencing etc. from surface and installation at 72L/9D (R-VII) with necessary fabrication job.

Transportation of the 1000mm width, 2X150kW, 6.6kV, double Drive Head unit Complete with Drive Drum, Driven Drum, Gear Box, Motor, Couplings, Bearing Blocks, baseplate, fencing etc. from surface and installation at 72L/9D (R-VII) with necessary fabrication job.

Transportation of Discharge Unit complete with girders, strike plate, chute plates,scrappers etc from surface and installation at 72L/8D (R-VII) with necessary fabrication job.

Transportation and Installation of Loop Take-up Unit Complete, with Fencingfrom surfce and install at 72L/9D

Transportation of Tail End Unit complete with fencing from surface and installation at 72L/28D (R-VII) with necessary fabrication job.

Loading, transportation and unloading of two VCB(6.6KV/30A), starter(6.6KV/2X150kW), LS unit to 73L/8D with help of haulages & 100 mtr manually.

Laying-hanging of 250mtr 6.6kV grade 70 sq.mm. PVCDWA cable from 66L/9R to 73L/9R manually.

Transportation of 1400 mtr. 1000mm width PVC belting to 72L Tandem belt installation site with help of haulages & 100mtr manually.

Laying, lapping, jointing & tensioning of this 1400 mtr. 1000mm width PVC belting in proposed 72L Tandem belt.

Transportation of 690 mtr. 1000mm belt structures to 72L Tandem belt installation site with help of haulages & 30mtr manually.

Installation of this 690 mtr. 1000mm belt structures in proposed 72L Tandem belt conveyor.

Transportation of pull cords with its cable, communication devices with its cable, signalling system (8-SWG GI wire, bobbin insulators & 3/8" X 3" MS Bolt-nut) from suarfce to 72L Tandem belt installation site with help of haulages and laying-placing them from 72L/8D to 72L/28D in R-VII seam.

Transportation & fitting of 10nos. decking plates at different locations like drive head, discharge, tail end etc.

Testing, trial run, alignment & commissioning of this belt conveyor from 72L/8D to 72L/28D in R-VII seam.

Supply of DA Cylinder

Supply of Oxygen Cylinder

Supply of MS Welding Electrode (4mmX450mm)

Supply of MS Nut Bolt (M16X50)

Part B. Civil foundation works for installation of 1000mm wide belt conveyer drive head, discharge unit, loop take-up unit and platform for VCB, Starter for proposed 72L Tandem belt conveyor of 3&4 incline, JPC.

Recess cutting in stone

Cleaning of muck/debris

Sand filling for starter,breaker

Brickwork with flyash bricks of class design 75 in foundation & plinth in: C:M-1:6

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources).

12mm cement plaster of mix 1:6

Loading materials into tubs and unloading at site(tubs)

Part C. Roof heightening by drilling blasting in stone, cleaning, roof bolting including cost of drill rod, drill bit for installation of proposed 72L Tandem belt conveyor in R-VII seam of 3&4 incline under JPC.

Roof heightening by drilling, blasting in stone including dressing, Cleaning & cost of drill rod and drill bit. (Excluding cost of explosive & detonator).

Roof bolting including carrying of materials, drilling, grouting & cost of drill rod and drill bit

Total impact of GST for the purpose of CTC

N.K. ENTERPRISE (BID ID -1098999)

F.R. ENTERPRISE (BID ID -1099512)