Providing additional facilities to the Municipal ground at Valpoi. SH - Design , supply and Installation of High mast sports lighting at Valpoi.

Amount

Design, Supply, erection, testing and commissioning of 20mtrs High Mast Lighting System totally hot dip galvanised as per BS EN ISO 1461/ASTM A 123 and suitable for wind speed as per IS : 875 (Part - 3). The Mast shaft shall have cross section of 20 sided polygon and shall be in 2 sections with Base and top diameter 460mm and 150mm with plate thickness 4/3mm respectively and base plate thickness of 25mm. The Mast shall include 8 Nos of foundation bolts of special steel type TS 600 having a diameter 30mm and 850mm long i/c nuts, washers, anchor plates and templates. The Mast shall have terminal box at the base with the door of approx. size 1200mm X 300mm and a Lighting protection finial G.I single spike of approx. length 1200mm. The Mast shall have an integral power tool of 1.5 HP motor capacity and Double Drum Winch installed inside the base compartment for its motorized operation and also a manual handle. It shall also include accessories for High Mast including galvanised Head Frame Assembly/ Lantern Carriage and a 2 point suspension system.The lantern carriage shall be constructed of material 60 OD/50NB ERW Class B - M.S pipe having carriage ring diameter of approx. 711mm. The Lantern Carriage shall be welded, 2 sections having load carrying capacity of 12 luminaires asymmetrical . It shall also have a Trailing Cable EPR insulated PCP sheathed copper cable of size 5 core 4 sq.mm,3 core PVC insulated PVC sheathed unarmoured copper conductor cable for connecting fittings incl.installation of fittings, Stainless Steel Wire Rope of grade AISI 316, 6mm diameter (7/19 construction), having a breaking load capacity of 2350Kgx2. The High Mast shall be mounted on concrete foundation (Foundation cost to be paid seperately). The High Mast shall be of make Bajaj/Philips/Wipro/Transrail). or equivalant. The contractor shall submit design analysis of foundation along with structural liability certificate before execution of foundation work. The contractor shall also submit structural stability certificate after execution of foundation & after execution of High Mast.

Design, Supply of 500W,IP 66 LED flood light luminaire having housing and trim made of pressure die cast corrosion resistant alluminium alloy with heat dissipating fins design for excellent thermal management, Cover Glass- heat resistant toughened clear glass, Light Source - High power LED SMD type Color temp. White light 5700ºK ±300ºK and CRI > 70 , MCPCB Construction, LPW > 100 /120, Optical Lens- Polycarbonate high performance type narrow, medium, wide (other options as per project needs) , Ingress protection - Flood light IP66, Driver enclosure IP65 . incl. connections etc. as required of make Transrail/Wipro/Philips/Bajaj/GE) or equivalant. Contractor shll submit autocad drawing with design and after installing avg. lux level shall be 200. ( horizontal & Vertical)

Supply of single dome LED Aviation Obstruction incl. all the other accesssories complete as required and approved by Engineer in charge.

Supply of 4 core armoured PVC insulated PVC sheathed aluminum conductor cable of 1.1 kv grade with ISI mark conforming to IS:1554(Part I), IS:7098(Part II) with latest amendments of following size. (1) 4core 25 sq.mm

Supply and making cable end terminations with brass compression gland and aluminium lugs for following sizes of 4 core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade, complete as required. (1) Size 4 core 25 sq.mm.

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed lenghtwise on top of cable all over the run and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.

Providing & fixing G.I. pipes complete with G.I. fittings including trenching and re-filling etc. as reqd. ( external work) f) 50 mm nominal bore.

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing special protective masonry chamber as per enclosed drawing ( to be paid extra) (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20mm, Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement(plumbing will be paid seperately).(b) In rocky strata

Extra for using salt & charcoal for pipe earth electrode as required.

Providing and laying 25 mm x 5 mm G.I.strip on surface or in recess for connections etc. as required

Supply, Installation, Testing & Commissioning of outdoor type feeder pillar with double door and locking facility fabricated with 16swg CRCA M.S. sheet duly degreased,derusted,powder coated with interconnections with copper wiring,glanding,lugging,earthing stud etc. suitable for 440 volts, 3phase, 4wire, 50Hz AC supply ,mounted on stand fabricated with M.S. angles of size 35mmx35mmx6mm comprising of following: 1) 32 Amps TP MCB as incomer of approved make - 1 No. 2) Indicating lamp set RYB with control fuses - 1 set 3) 25 Amps 3 pole contactor L&T/siemens make - 2 No. 4) Single dial timer of make:GIC with MCB - 2 No. 5) Power tool control with 2 Nos 9A contactors and raise lower push button 6) Neutral link, 20A, - 1No.

SITC of outdoor type cubical double door panel board with canopy mounted on MS stand. panel board made up of 16 SWG CRCA sheet duly powder coated and consisting of incomer a) 3 phase energy meter with mcb - 1 no b) 120A main switch - 1 no c) 120A main switch for DG incomer - 1no outgoing a) 125A manual change over switch - 1 Nos b) 63A mccb - 6 nos

Earthwork in excavation by mechanical means(hydraulic excavator/manual in foundation pipeline trenches drain not exceeding 1.5m in width 10 sq.m on plan including dressing of sides, ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus soil as directed within a lead of 50 m. a) All types of ordinary rock including all types of laterite rock,blasting prohibited

Rubble packing with hard laterite stone under floors including watering ramming and consoldating etc in pipeline trenches and other foundations complete

Providing and laying cement concrete 1:3:6 (1 cement:3 coarse sand: 6 graded granitic or basaltic stone aggrt. 40 mm nominal size) excluding cost of centering ,shuttering and finishing: a) All work upto plinth level

Providing and laying in position ready mixed concrete (RMC) with usage of Fly Ash as per IS 3812 and IS 456-2000 manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continious agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer- in-charge. All works upto floor V level M-30grade of concrete

Centering and shuttering i/c strutting, proping etc. and removal of form for . b) Vertical surfaces such as retaining walls,return walls,walls (any thickness) including attached pilasters, buttresses,plinth and string courses,fillets etc

Providing Mild steel reinforcement conforming to IS- 1786 of 1986 for RCC work incl. bending, binding and placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose comprehensive strengh is not less than that of surrounding concrete in the structural member

Supply installtaion testing and commissioning of 62.5kva 3phase Diesel Generating Set with 4or6 inline cyclinder coupled to 3phase Alternator. Having advance digital controller and outgoing mcb of sutibale rating. Make of engine:- Volvo eicher/ Escorts/ Perkins Make of alternator:Stamford/LS/ Trident.

Two years maintaince package inclduing minor breakdown and oil change servicing for entire 2 years

M/S NANU ENGINEERS PVT LTD