CERTAIN B/R REPAIR IN SINGLE AND MD JCOs ACCN AT 223 ABOD MIL STN SURANUSSI UNDER AGE (I) SURANUSSI

Amount

Demolition of brick work built in cement mortar including all quoins arches, pillars etc but including ashalr facing dressed stone work and precast concrete articles complete all as specified and as directed

Demolition of cement conc (un reinf) in ground floor and pavings not exceeding 15 cm thick above or below ground level complete all as specified and as directed

Taking down cement or cement lime plaster of any description on brick or stone walls, etc incl raking out joints hacking for keys srubbing down with water etc complete all as specified and as directed

Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area n.exc 1.50 Sqm each and removing from site complete all as specified and as directed

Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area exc 1.50 Sqm but n.exc 4.00 Sqm & removing from site complete all as specified and as directed

Taking down shutters of any description exc 1sqm each and not exc 2.00 sqm each complete all as specified and as directed

Refixing of shutters of any description size exc 1 sqm and n.exc 2 sqm in the same opening complete all as specified and as directed

M&L brick work , with sub class 'B' bricks built in cement mortar 1:6 straight or curved on plan exc 6mtr mean radius, using old size bricks complete all as specified

M&L 15mm thick cement plastering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified.

M&L 15 mm thick cement plastering in cement mortar (1:4) of brick work or concrete surfaces with using water proofing compound finished even & smooth without using extra cement complete all as specified.

M&l for 5 mm th rendering in cement mortar in 1:3 on ceiling finished even and smooth without using extra cement complete all as specified and as directed

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering to Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165) complete all as specified and as directed

M&L for 35mm th IInd class Hard Wood glazed /gauged shutters open rebated and prepared to receive glass /gauge etc without sash bars edges of framing plain or chamfered rounded fitted with cut and mitred beads for securing glass/gauge etc all as specified in SSR Part I section 8 clause 8.2(a) including helical Door spring complete all as specified and as directed

S&F 30mm thick flush shutter solid core construction with block board core and decorative face panels veneer with lipping/frame to match on both faces complete all as specified and as directed

S&F solid PVC door frame of size 50mmX 47mm made out of 5mm th plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed

S&F 30mm th factory made PVC door shutter solid panel consisting of frame made out of MS tubes for top & bottom rails .Ms frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail , lock rail &bottom rail on either side & as gap insert for top rail & bottom rail . Panelling of plain of plain colur PVC sheet to be fitted in the MS frame welded/sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement ,etc all as specified and shown on drawings complete all as specified and as directed

(a) Supply & Fixing steel windows 1.25 mm thick box type (primer coated) ERW hollow 'P' section of size 60mm x 25mm single rebate comprises of skeleton shutter ERW sec 50 x 20 mm & 1mm thick and openable leaf consisting two nos sash bar of T section 20x3mm complete welded to frame including cutting holes and making good dismanteled portion in cement concrete (1:2:4) type B-I four nos for each window including plastering around following fitting welded to shutter complete all as specified and as directed by Engineer-in-Charge :- (i) Hold fast 150mm long 12 mm x 3mm made to shape - 04 Nos each window. (ii) Handle of Z Section 20 x 25 mm, 100mm long 01 Nos each leaf. (iii) MS tower bolt 150 mm long-02 Nos each leaf. (iv) Z Section 20 x 25mm, 100 mm stopper - 01 Nos per leaf (v) Cleat 55 mm long of hollow square 15x20x63mm welded to hinges - 01 Nos per leaf. (vi) MS Box type hinges of size 75 X 12 mm - 02 Nos per leaf. (vii) MS Guard bars square 12mm dia @10 cm c/c with GI frame fixed to window frame. (viii) Fabrication & fixing shall be as per drg No CEJZ/TD-06/07 (b) Same window as of above (a) except grill for recieving gauged shutter.

S&F mild steel barrel tower bolt 200mm size stove enamelled black with bright bolt etc all as specified

S&F 125 mm size mild steel pressed handle stove enamelled black and fixed complete all as specified and as directed by engineer-in-charge.

S&F 100 mm size mild steel butt hinges medium weight cold rolled complete all as specified and as directed by engineer-in-charge.

S&F floor door stopper aluminium alloy body and tounge 140mm anodised with hard drawn steel spring etc complete all as specified and as directed by engineer-in-charge.

M & L 19 mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination,including magnetic catcher and all kitchen cabinet accessories and fixed with screws including timber frame work complete all as specified and as directed by engineer-in-charge.

S&F galvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staple complete all as specified and as directed by engineer-in-charge.

S&F in repair galvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staple complete all as specified and as directed by engineer-in-charge.

S&F in 3mm th sheet glass ordinary quality glazing with oil putty in square n.exc 0.5 sqm in each pane

S&F in repair Vitreous china ware water closet Orissa pattern including connecting to trap and to flushing pipe anti Syphonage pipe etc complete , fixed as in repairs of size 580mm X 440mm complete all as specified. Make: Hindware / Cera / Parryware. complete all as specified and as directed.

S&F in repairs PVC flushing cistern, 10 ltr capacity, valve less symphonic action type, low level, with intel, ball valve, float valve abd handle including brackets fixed in position, 32 mm dia PVC flush pipe and connection to water mains complete all as specified and directed by Engineer-in-Charge.

Dismantling water tanks of any description exc 250 and n.exc 500 ltr capacity and removing to store complete all as specified and as directed by engineer-in-charge.

S&F Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 Make : Sintex / Frontier / Polycon complete all as specified and as directed

S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete fixed as in repairs.

S&F in repair 15mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete fixed as in repairs.

Taking down GI tubing and connections with all fittings 15 mm bore complete all as specified and as directed by engineer-in-charge.

Ditto all as per item No above but 20mm bore

S&F 15 mm dia GI tubing , medium grade, and connections fixed to wall or ceiling, laid in floor etc complete all as specified and as directed by engineer-in-charge.

S&F 20 mmdia GI tubing and connections fixed to wall or ceiling, laid in floor etc

S&F in repair pvc connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by engineer-in-charge.

S&F in repair bib taps , 15mm dia cast copper alloy chromium plated , with crutch or butterfly handle , screwed down , screwed for iron pipe or for brass ferrule and all as specified and directed.

S&F in repair stop valves15 mm , cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed.(Make- Jaguar, parko , Marc)

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, waste pipe and waste coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.

All as per item No above but without drainage board and over all size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified.

S &F in repairs 15 mm PVC waste pipe of standard pattern not less than 75cm long 32 mm/40mm dia for WHB/steel sink waste coupling or suitable size complet all as directed.

S&F in repair PVC shower rose PTMT 15mm size fixed to iron pipe complete all as specified and as directed by engineer-in-charge.

M&L preparing surfaces of new walls and applying two coats of oil bound distemper over a coat of primer complete all as specified

M&L preparing surfaces new of walls and applying two caots of cement base paint over a coat of primer complete all as specified incl preparation of surfaces.

M&L for three coats of white wash on newly plastered surface of ceiling incl preparation of surface complete all as specified.

M & L perparation of old decorated plastered surfaces of wall and cornics by complete removal of existing treatment by applying water and scrapping of entire thickness of existing treatment with using steel scraper and thereafter applying applying two coat of oil bound distemper over wall care putty to achieve smooth finish with colour scheme change complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted steel surfaces of any description over 10 cms width or girth and applying one coat of synthetic enamel paint on steel surfaces in simple complete all as directed

M&L for preparation of old painted wooden surfaces of any description over 10 cms width or girth and applying one coat of synthetic enamel paint on wooden surfaces complete.

M&L for two coats of synthetic enamel paint on new steel surface over 10cm width or girth over a coat red oxide primer incl preparation of surfaces.

M&L for two coats synthetic enamel paint new wooden surface over 10 cm width or girth over a coat pink primer incl preparation of surfaces.

S&F in repair 75mm size PVC (SWR) floor trap plain with grating incl to jointing with waste pipe with adhessive etc all as specified

S&F in repair 3mm th sheet glass ordinary quality glazing with oil putty in square n.exc 0.5 sqm in each pane

S&F in repair PVC SWR pipe 110 mm dia single socketed in any length with rubber ring joints fixed to walls etc all as specified

S&F in repair PVC SWR pipe 75 mm dia single socketed in any length with rubber ring joints fixed to walls etc all as specified

S&F 110 mm dia PVC SWR type bends any radius complete all as specified

Ditto all as per item No 80 above but 75mm dia etc all as specified

Demolition of stone slabs,floor, hearth or wall tilling incl cement mortar bedding (but not backing), remvoving serviceable tiles to store and rubbis off the premises complete all as specified and directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , over15 mm th screed or bedding layer in CM 1:6 complete all as specified and directed by Engineer-in Charge (Make- Kajaria, somany, orientbell)

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , over15 mm th screed or bedding layer in CM 1:6 complete all as specified and directed

M&L for glazed ceramic tiles coloured of size 450 mm x 350 mm x 7mm th on vertical surfaces such as in skirting, dado etc over 10 mm th backing coat in cm 1:4 complete all as specified and directed.

M&L Granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed or bedding layer in CM 1:4, incl round edges all as specified and directed by Engineer-in Charge

M&L for 300X300X 25 mm th chequered cement concrete tiles coloured with grey cement and pigment as in floor etc over 20mm th screed bed in CM 1:6 complete all as specified and directed by Engineer-in Charge.

M & L Machine pressed precast conc. interlocking paver block cosmic paver vlock (rectangulat/star etc.) of any colour any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and with pigment complete all as specified and directed by Engr - in - Charge.

Sand filling under floors or in foundations including watering and consolidation

M&L PCC 1:4:8 type D-2 using 40 mm graded stone agg as in mass filling and sub base.

AAY KAY Constructions (BID ID -3336180)

M/s Dinesh Kumar (BID ID -3344520)

DUGGAL CONSTRUCTION CO (BID ID -3345193)

JAI DURGA CONSTRUCTION COMPANY (BID ID -3344653)