Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.1 LAccepted-AOC VILL RANIA GT ROAD DHARIWAL DISTT GURDASPUR PB PIN 143519 | GURDASPUR | PUNJAB | 143519 | L1 | Accepted-AOC Lowest and reasonable bid | |
| 2 | L2₹23.9 L+₹2.5 L (11.9%)Rejected-Finance | L2 | Rejected-Finance Other than the lowest bid |
| Sl No | Description | Qty | Unit | M/S NEW SUBBERWAL FURNISHERS L1 | BALWINDER SINGH AND SONS L2 |
|---|---|---|---|---|---|
| 1.00TEAPOY ( Drg No. FD-382 & FD-278) M & L for carrying out repair/replacement of following parts of Teapoy as per drawing after dismantling the old unserviceable part complete all as specified :- | |||||
| 1.01 | Leg using Teak wood (MP Teak) . | 300 | Each | 30 ₹9,000 Lowest | 50 ₹15,000 |
| 1.02 | Long rail using Teak wood (MP Teak) . | 160 | Each | 20 ₹3,200 Lowest | 40 ₹6,400 |
| 1.03 | Short rail using Teak wood (MP Teak) . | 160 | Each | 20 ₹3,200 Lowest | 30 ₹4,800 |
| 1.04 | Top using 18/19mm thick pre-laminated particle board ISI Marked Make (Action tesa/Archid/Novapan) exterior grade and 6mm thick Teak wood edging all around. | 280 | Each | 100 ₹28,000 Lowest | 150 ₹42,000 |
| 1.05 | Stiffener using Teak wood (MP Teak) . | 120 | Each | 40 ₹4,800 | 30 ₹3,600 Lowest |
| 1.06 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . | 300 | Each | 30 ₹9,000 Lowest | 30 ₹9,000 Lowest |
| 2.00PEG TABLE (Drg No. FD-384 & FD277) M & L for carrying out repair/replacement of following parts of Peg Table as per drawing after dismantling the old parts complete all as specified :- | |||||
| 2.01 | Leg using Teak wood (MP Teak) . | 490 | Each | 30 ₹14,700 Lowest | 30 ₹14,700 Lowest |
| 2.02 | Long rail using Teak wood (MP Teak) . | 320 | Each | 30 ₹9,600 Lowest | 30 ₹9,600 Lowest |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
13 Oct 2025, 6:00 pmClosed
GE (WEST) JALANDHAR CANTT
KABIR ROAD JALANDHAR CANTT
CERTAIN REPAIR WORKS TO WOODEN FURNITURE INCLUDING PAINTING AND POLISHING FOR MD ACCN OF JCOs/OR, OFFRS AND OTM ACCN UNDER GE (W) JRC
2025_MES_731155_1
GE/JAL(W)-74/2025-26
Open Tender
Civil Works
Item Rate
270 days
JALANDHAR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE WEST
₹50,000
Yes
23 Jan 2026
16 Sept 2025
20 Oct 2025
16 Sept 2025
13 Oct 2025
30 Sept 2025
Amount
TEAPOY ( Drg No. FD-382 & FD-278) M & L for carrying out repair/replacement of following parts of Teapoy as per drawing after dismantling the old unserviceable part complete all as specified :-
Leg using Teak wood (MP Teak) .
Long rail using Teak wood (MP Teak) .
Short rail using Teak wood (MP Teak) .
Top using 18/19mm thick pre-laminated particle board ISI Marked Make (Action tesa/Archid/Novapan) exterior grade and 6mm thick Teak wood edging all around.
Stiffener using Teak wood (MP Teak) .
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .
PEG TABLE (Drg No. FD-384 & FD277) M & L for carrying out repair/replacement of following parts of Peg Table as per drawing after dismantling the old parts complete all as specified :-
Leg using Teak wood (MP Teak) .
Long rail using Teak wood (MP Teak) .
Short rail using Teak wood (MP Teak) .
Top using 18/19mm thick pre-laminated particle board ISI Marked Make (Action tesa/Archid/Novapan) exterior grade and 6mm thick Teak wood edging all around.
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .
TABLE BED SIDE (Drg No. FD-276) M & L for carrying out repair/replacement of following parts of Table bed side as per drawing after dismantling the old parts complete all as specified :-
Front using 12 mm thick ply wood with one side teak finish. Make (National/Duro/Green ply).
Back using 6 mm thick ply wood commercial Make (National/Duro/Green ply).
Bottom using 12 mm thick ply wood commercial Make (National/Duro/Green ply).
Shelve using 12 mm thick ply wood commercial Make (National/Duro/Green ply).
Top using 18/19mm thick pre-laminated particle board ISI Marked Make (Action tesa/Archid/Novapan) exterior grade and 6mm thick Teak wood edging all around.
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .
TABLE 900 x 600 x 760 mm WITH DRAWER (Drg No FD-41/224/283/1008 M & L for carrying out repair/replacement of following parts of Table 900 x 600 x 760 mm with drawer as per drawing after dismantling the old parts complete all as specified :-
Leg using Teak wood (MP Teak) .
Long rail using Teak wood (MP Teak) .
Short rail using Teak wood (MP Teak) .
Drawer using 6 mm thick ply wood commercial Make (National/Duro/Green ply).
Top using 18/19mm thick pre-laminated particle board ISI Marked Make (Action tesa/Archid/Novapan) exterior grade and 6mm thick Teak wood edging all around.
Stiffener using Teak wood (MP Teak) .
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .
TABLE DINING FOR 6 PERS (Drg No FD -273) M & L for carrying out repair/replacement of following parts of Table dining for 6 pers as per drawing after dismantling the old parts complete all as specified :-
Top using 18/19mm thick pre-laminated particle board ISI Marked Make (Action tesa/Archid/Novapan) exterior grade and 6mm thick Teak wood edging all around.
Leg using Teak wood (MP Teak) .
Long rail using Teak wood (MP Teak) .
Short rail using Teak wood (MP Teak) .
Long Stiffener using Teak wood (MP Teak) .
Short Stiffener using Teak wood (MP Teak) .
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .
TABLE WRITING (Drg No FD-275/33/27/1116) M & L for carrying out repair/replacement of following parts of Table writing as per drawing after dismantling the old parts complete all as specified :-
Top using 18/19mm thick pre-laminated particle board ISI Marked Make (Action tesa/Archid/Novapan) exterior grade and 6mm thick Teak wood edging all around.
Leg using Teak wood (MP Teak) .
Long rail using Teak wood (MP Teak) .
Drawer using 6 mm thick ply wood commercial Make (National/Duro/Green ply).
Shutter using 18/19mm pre-laminated particle board exterior grade, fixed with 2 Nos Hinges medium weight 75 mm all as shown in Drg.
Stiffener using Teak wood (MP Teak) .
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .
TABLE 900mmx600mmx760mm WITHOUT DRAWER (Drg No FD -284) M & L for carrying out repair/replacement of following parts of Table 900mmx600mm as per drawing after dismantling the old parts complete all as specified :-
Top using 18/19mm thick pre-laminated particle board ISI Marked Make (Action tesa/Archid/Novapan) exterior grade and 6mm thick Teak wood edging all around.
Leg using Teak wood (MP Teak) .
Long rail using Teak wood (MP Teak) .
Side rail using Teak wood (MP Teak) .
Stiffener using Teak wood (MP Teak) .
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .
TABLE DRESSING GENTS WITH MIRROR (Drg N0. FD -230/379 M & L for carrying out repair/replacement of following parts of Table Dressing Gents With Mirror as per drawing after dismantling the old parts complete all as specified :-
Top and side complete using 18/19mm thick pre-laminated particle board ISI Marked Make (Action tesa/Archid/Novapan) exterior grade and 6mm thick Teak wood edging all around.
Bottom partition using 18/19mm thick block board ISI Marked Make (Action tesa/Archid/Novapan) commercial including 4mm thick teak wood beading.
Drawer using 6 mm thick ply wood commercial Make (National/Duro/Green ply).
Mirror 5mm thick of make Atul/Saint-Govin with alluminum sliding channel
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .
CHAIR DINNING LONG BACK (Drg No FD No. 357/222) M & L for carrying out repair/replacement of following parts of Chair dining long back as per drawing after dismantling the old parts complete all as specified
Triangular Teak stiffener 8 Nos. of size 60x60x25 mm at corners
Back using 6 mm thick ply wood commercial Make (National/Duro/Green ply).
Stiffener using Teak wood (MP Teak) .
Supply & fixing seat and back using 50mm thick synthetic foam of 32/40 density fixed over wooden frame covered with leatherite rexine of approved quality.
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .
HAT STAND WITH MIRROR (Drg No .FD-233/206/23) M & L for carrying out repair/replacement of following parts of Hat Stand with mirror as per drawing after dismantling the old parts complete all as specified
Mirror 5 mm thick of Make Atul/Saint-Govin
Hat stand back using teak wood frame and 6mm thick commercial ply as per drg.
Copper oxidised steel peg
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .
STOOL DRESSING CB (Drg No FD -374/114) M & L for carrying out repair/replacement of following parts of Stool dressing CB as per drawing after dismantling the old parts complete all as specified
Front Leg using Teak wood (MP Teak) .
Back Leg using Teak wood (MP Teak) .
Stiffener using Teak wood (MP Teak) .
Long rail using Teak wood (MP Teak) .
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .
BIN SOLID LINEN LARGE/SMALL (Drg No FD-244) M & L for carrying out repair/replacement of following parts of Bin solid linen large /small as per drawing after dismantling the old parts complete all as specified
Top using 6mm thick teak face plywood ISI Marked covered with Teak wood edging alround.
Bottom using 12mm thick commercial plywood ISI Marked.
Bottom rail using Teak wood (MP Teak) .
Stiffener using Teak wood (MP Teak) .
Leg using Teak wood (MP Teak) .
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .
ALMIRAH MEDIUM WOODEN 1/2H 1/2 S COMPRISING FOLLOWING REPAIRS/REPLACEMENT (Drg No FD-21) M & L for carrying out repair/replacement of following parts of Almirah Medium wooden 1/2H/1/2 S comprising following repairs/replacement as per drawing after dismantling the old parts complete all as specified
Shutters made of block board commercial 18/19mm thick ISI Marked with continous hinge Make (Durga /National/Century) as per drg.
Back using 12mm thick commercial plywood ISI Marked.
Side using 9mm thick commercial plywood ISI Marked.
Block board commercial quality 18/19mm thick as in shelves, partition, top etc as per drg.
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .
ALMIRAH M/U WOODEN COMPRISING FOLLOWING REPAIRS/REPLACEMENT (Drg No FD -93(M)) M & L for carrying out repair/replacement of following parts of Almirah M/U wooden comprising following repairs/replacement as per drawing after dismantling the old parts complete all as specified
Shutters made of block board commercial 18/19mm thick ISI Marked with continous hinge Make (Durga /National/Century) as per drg.
Back using 12mm thick commercial plywood ISI Marked.
Side using 9mm thick commercial plywood ISI Marked.
Block board commercial quality 18/19mm thick as in shelves, partition, top etc as per drg.
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .
BED PLY WOOD TOP (Drg No FD-246) M & L for carrying out repair/replacement of following parts of Bed Ply Top as per drawing after dismantling the old parts complete all as specified
Long rail using Teak wood (MP Teak) .
Head board using Teak wood (MP Teak)
Foot board using Teak wood (MP Teak)
Top using 12mm thick commercial plywood ISI Marked.
Stiffener using Teak wood (MP Teak) .
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .
TABLE OFFICE OFFICER's WOODEN (Drg No WDF-33 & DF-20) M & L for carrying out repair/replacement of following parts of Table office officers wooden as per drawing after dismantling the old parts complete all as specified
Top 5'x3' made out of 18mm thick prelaminated particle board exterior grade, phenyl formaldehyde bonded, flat pressed three layer BWR type-II, Make : Action tesa/Archid/Novapan ISI marked fixed with mild steel screws as per size and shape including 4mm thick Teak wood (MP Teak) beading all around.
Leg using Teak wood (MP Teak) .
Stiffener using Teak wood (MP Teak) .
Front rail using Teak wood (MP Teak) .
Side rail using Teak wood (MP Teak) .
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .
TABLE OFFICE CLERK WOODEN (Drg No WDF-31 & DF-20) M & L for carrying out repair/replacement of following parts of Table office Clerk wooden as per drawing after dismantling the old parts complete all as specified
Top 54''x36' made out of 18mm thick prelaminated particle board exterior grade, phenyl formaldehyde bonded, flat pressed three layer BWR type-II, Make : Action tesa/Archid/Novapan fixed with mild steel screws as per size and shape including 4mm thick Teak wood (MP Teak) beading all around.
Leg using Teak wood (MP Teak) .
Stiffener using Teak wood (MP Teak) .
Front rail using Teak wood (MP Teak) .
Side rail using Teak wood (MP Teak)
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .
SIDE BOARD (Drg No FD-241/1112) M & L for carrying out repair/replacement of following parts of Side Board as per drawing after dismantling the old parts complete all as specified
Top made out of 18mm thick prelaminated particle board exterior grade, phenyl formaldehyde bonded, flat pressed three layer BWR type-II, Make : Action tesa/Archid/Novapan ISI marked fixed with mild steel screws as per size and shape including 4mm thick Teak wood (MP Teak) beading all around.
Leg using Teak wood (MP Teak) .
Back made out of 6mm thick commercial ply wood
Side rail using Teak wood (MP Teak) .
Front rail using Teak wood (MP Teak) .
Door shutters made out of 18mm thick block board with 6 mm thick Teak wood (MP Teak) edging all around of doors
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .
TABLE DRESSING LADIES WITH MIRROR (Drg No FD -251/378) M & L for carrying out repair/replacement following parts to table dressing ladies with mirror, complete all as specified and shown on drgs after removing the old broken part.
Mirror 5.5mm thick electro copper plated of polished plate size 365x1220mm.
Frame of mirror made out of Teak wood (MP Teak) of size 25 x 19mm.
Top made out of 18mm thick prelaminated particle board exterior grade, phenyl formaldehyde bonded, flat pressed three layer BWR type-II, Make : Action tesa/Archid/Novapan ISI marked fixed with mild steel screws as per size and shape including 4mm thick Teak wood (MP Teak) beading all around.
Drawers of table.
Sliding glass of table.
Channel made out of aluminum for fixture for sliding glass .
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .
TABLE CENTRE/TABLE CENTRE TWO TIER (Drg No FD-274/235) M & L for carrying out repair/replacement following parts to table centre, complete all as specified and shown on drgs after removing the old broken part.
Top 900x450mm made out of 18mm thick prelaminated particle board exterior grade, phenyl formaldehyde bonded, flat pressed three layer BWR type-II, Make : Action tesa/Archid/Novapan ISI marked fixed with mild steel screws as per size and shape including 4mm thick Teak wood (MP Teak) beading all around.
Leg using Teak wood (MP Teak) .
Long rail using Teak wood (MP Teak) .
Short rail using Teak wood (MP Teak) .
Stiffeners of 2 tier table using Teak wood (MP Teak) .
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .
TABLE DINING FOR 8 PERSONS (Drg No FD-273) M & L for carrying out repair/replacement following parts to table dining for 8 persons, complete all as specified and shown on drgs after removing the old broken part.
Top 1800x900mm made out of 18mm thick prelaminated particle board exterior grade, phenyl formaldehyde bonded, flat pressed three layer BWR type-II, Make : Action tesa/Archid/Novapan ISI marked fixed with mild steel screws as per size and shape including 4mm thick Teak wood (MP Teak) beading all around.
Leg using Teak wood (MP Teak) .
Long rail using Teak wood (MP Teak) .
Short rail using Teak wood (MP Teak) .
Long Stiffeners using Teak wood (MP Teak) .
Short Stiffeners using Teak wood (MP Teak) .
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .
TRESTLE STORE ROOM WOODEN (Drg No FD-86(M)) M & L for carrying out repair/replacement following parts to trestle store room wooden, complete all as specified and shown on drgs after removing the old broken part.
Legs of size 100 x 100mm at top and 75x75mm at bottom 400mm high made of second class hard wood (SAL).
Long rail of sizes 100x100x2440mm made of second class hard wood (SAL).
Central rails /Stiffeners of size 65x100x1220mm made of second class hard wood (SAL).
Applying two coats of synthetic enamel paint (black) after necessary preparation of surfaces .
SOFA SET THREE SEATER/SINGLE SEATER WITH DETACHABLE CUSHION (Drg No FD-281/1113 & FD -373) M & L for carrying out repair/replacement of following parts of Sofa set three seater /single seater with detachable cushion as per drawing after dismantling the old parts complete all as specified
S & F of long rails of seat for three seater sofa of size 1590mmx100mmx35mm of 1st class hardwood (teak) duly plained and smoothed with sand paper.
All asper 23.01 but Side rail of size 575mm x 100mm x 35mm.
All as per Srl Item no. 23.01 above but long rail of back of size 1590mm x 70mm x 35mm.
do but Side rail of size 575mm x 100mm x 35mm.
All as per Srl Item no. 23.01 above but long rail of back of size 1590mm x 70mm x 35mm.
All as per item No 23.01 above but long rail of back of single seater sofa of size 575mmx70mmx35mm.
S & F in replacement of arms for Single / Three seater sofa of size 35mm x 70mm (cross section) of 1st class hard wood (MP Teak) complete all as specified and shown on drgs after removing the old broken arms.
All as per item No above but here-in-before but batten of size 50mm x 20mm.
M & L for applying two coat of french polish after preparation of surface complete to sofa 3 seater
M & L for applying two coat of french polish after preparation of surface complete to sofa single chair.
S & F sofa foam cushion 40 density, 100mm thick of standard size covered with tapestry cloth not less than Rs. 180/- per meter as approved by GE. MAKE : SLEEP WELL/COOL FOAM/FEATHER FOAM.
Chair writing/CBA (Drg No FD -280 & FD 250/1107) M & L for carrying out repair/replacement following parts to Chair writing/CBA complete all as specified and shown on drgs after removing the old broken part.
Front Leg using Teak wood (MP Teak) .
Rear Leg using Teak wood (MP Teak) .
Front rail using Teak wood (MP Teak) .
Side rail using Teak wood (MP Teak) .
Back rail using Teak wood (MP Teak) .
Arms using Teak wood (MP Teak) .
Stiffener using Teak wood (MP Teak) .
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .
Chair Dinning (Drg No FD-279) S & F in replacement following parts to Chair Dinning/CBB complete all as specified and shown on drgs after removing the old broken part.
Front Leg using Teak wood (MP Teak) .
Rear Leg using Teak wood (MP Teak) .
Front rail using Teak wood (MP Teak) .
Side rail using Teak wood (MP Teak) .
Back rail using Teak wood (MP Teak) .
Stiffener using Teak wood (MP Teak) .
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .
Chair Easy (Drg No FD-229/378) M & L for carrying out repair/replacement of following parts of Chair Easy as per drawing after dismantling the old parts complete all as specified
Front Leg using Teak wood (MP Teak) .
Rear Leg using Teak wood (MP Teak) .
Front rail using Teak wood (MP Teak)
Side rail using Teak wood (MP Teak)
Back rail using Teak wood (MP Teak)
Arms using Teak wood (MP Teak)
Stiffener using Teak wood (MP Teak)
Applying two coats of French polish (ready made) to article after necessary preparation of surfaces
M&L for removing old broken cane and recanning with plastic cane (oval shape) 2mm wide and border with 3mm wide cane complete as per Godrej pattern using Make : SHAH/PREMIER brand cane to the following furniture articles:-
STOOL DRESSING CB (Drg No FD -374/114)
Chair writing (Drg No FD -280 & FD 1107)
Chair dining (Drg No FD-279)
Chair easy (Drg Nos FD-229/379 & FD 1108)
BALWINDER SINGH AND SONS (BID ID -3442463)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .