Renewal coat Macadamization of road from Shaloora Aloosa road Package No JK08159

Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4.

Providing and laying 50mm thick bituminius macadam with hot mix plant using crushed aggregate of grading as per table 500.4 premixed with bituminious binder, transported to site of work upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per technical specificaion clause 504.

Tack Coat: Providng and applying tack coat with Bitumen Emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 Kg/ per sqm on the prepared bituminious surface cleaned with hydraulic broom as per technical specification clause 503

20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508 (Mechanical means, Bitumen S-90)

Providing and laying seal coat sealing the voids in a bituminious surface laid to the specified levels, grade and cross fall using Type B Bitumen S-90 by mechanical means VG-10 As per Technical specification clause 510.

Retro relectorised Trafic signs : Providing and fixing of retro reflected cautionay, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixied over aluminium sheeting 1.50mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450mm x 450mm x 600 mm, 600mm below gournd level as per drawings and technical specification clause 801 (Curve, School, Left turn, Right turn, speed limit, busbays, merge traffic, diverge trafficc, give way , stop etc)

Citizen Information Board:-Providing and fixing of typical PMGSY informatory sign Board with logo as per MORD specification and drawing. Three MS plates 1.6 mm thick top and middle plate duly welded with MS Flat Iron 25mmx5mm on back edges. The lower plate will be welded with MS angle iron frame of 25x25x5mm. The angle iron frame of the lower most plate and flat iron frame of the middle plate will be welded to 2 No. 75x75mm of 12 SWG Sheet tubes posts duly embeded in cement concrete M-15 Grade blocks of 450x450x600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47x47mm of 12SWG Steel plate tubes. All MS well be stove enameled on the both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tubes will be painted with primer & two coats of epoxy paint as per drawing Clause 1701

Kilimeter Stone:Reinforced cement concrete M-15 grade KM stone/local stone of standard design as per IRC -18 fixing in position including painting etc as per drawing and technical specification clause 1703.ORDINARY KM STONES PRECAST

Surface dressing of the ground/shoulder including removing vegetation and inequalities not exceeeding 15cm deep and disposal of rubbish lead upto 50m and lifty upto 1.5m in all kinds of soil