Repairing and Painting work of Ambedkar park in front of Brijendra Swaroop Park under Benajhabar Mcrobert Ganj under ward-15 Zone-4

Scraping of old white or colour wash including refusal of dismantled material up to 60.0mtr distance as per direction by engg-in-charge.

Finishing walls with Putty approved brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work

Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undacorated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat of primer applid @ 0.75Ltr/10sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work for two coat.

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge: 2.1.1 All kinds of soil.

Brick work with common burnt clay (non modular) bricks of class-150 In foundation and plinth in:Cement mortar 1:4 (1 cement: 4 coarse sand)

Construction of granular sub base (GSB) by providing coarse graded material, spreading in uniform layer with mortor grader on prepared surface, mixing by mixin place method with rotovator OMC and compacting with viberatory roller to achieve the desired density as per clause 401.

Providing & laying of Rubber moulded Interlocking Concrete block pavement with 80mm thick ICBP (75% Gray & 25% Red/Yellow colored) having strength not less than 30KN/SQM complete as per technical specification Clause 1500.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20mm nominal size)

Applying priming coat over new steel and other metal surface upto 10cm. In width or girth or small not exceeding 0.10 Sq.M. area after and Including preparing the surface by thoroughly clearing oil, grease, dirt and other foreign matter and scoured with wire brushed, fine steel wood. Scrapper, sand papering and knotting including cost of all materials, labour T&P etc. required for proper completion of work. Painting 1st coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces upto 10cm width or girth or small articles not exceeding 0.10 Sq.M. in area with superior synthetic enamel such as Luxol 3, Hi gloss Apcolite, Superlac, Dulux specified brushing to give and even shade and including the cleaning the surface of all dirt, dust and other foreign matter sand papering and scrapping including cost of all materials, labour, tools and plants etc. required for proper completion of work. Extra over item 2 and 2(a) above but for every coat of paint after first coat.

Provinding and fixing of solar cat eyes made with HIP reflecting sheeting fix with properly approved solution with all T&P etc all complete.