REPAIR TO INTERNAL ROADS IN CERTAIN AREA AT VSN NAGPUR

Amount

Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc all as specified and directed

Material and labour for applying tack coat with bituminous primer @ 5kg/10Sqm of paving bitumen of grade VG-10 over bituminous macadam surfaces all as specified.

Material and labour Bituminous pre-mixed semi dense asphaltic concrete 30 mm consolidated thickness with 5.5 % (Bitumen grade VG-30) binder content by weight of total mix, by hot mix process and laid by mechnical paver finisher, to required camber and gradient using 8 to 10 ton power roller and compacted all as specified and directed.

Material and labour for repair to pot holes not exc 1 sq m each including sweeping in free from dust and mud or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) and by applying tack coat with bitumen primer @ 5 kg per 10 sq m putting in premixed bituminous macadum well rammed and sealed with binder 9.8 kg per 10 sqm, binded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of pot holes n exc 30 mm complete all as specified and directed.

Material and labour for premix bituminous macadam using paving bitumen of grade VG-30 penetration laid / rolled and compacted to required gradient and camber with vibratory power roller (consolidated thickness 75mm or less) using 4% binder content by weight of total mix to make good depression / pot holes complete all as specified and directed.

Material and labour for providing 2 mm thick 'Kateline Traffix' thermoplastic road marking of compound of white / yellow of approved shade for road marking of width not exc. 100 mm and painting lines, dashes,arrows etc on bitumen road / pavement and on concrete/ bituminous surfaces using hot processor plant including removing old paint by paint remover and cleaning with scrapers for removing all dirt/dust and other foreign matters at site and managing traffic control etc complete all as specified and as directed Make: Apcotrack of Asian or equivalent in Shalimar / Berger lewis / Nerolac / Johnson & Nicholson

Material and labour for preparation of old surfaces of kerb stone/ concrete surfaces of any description, over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint of approved shade all as specified and as directed.

Material and labour for preparation of new surfaces of kerb stone/ concrete surfaces of any description, over 10cm width or girth, not otherwise described and applying two coat of synthetic enamel paint of approved shade over a coat of primer as specified and as directed.

Demolition of concrete of any description and in any position not otherwise specially provided for all as specified and directed.

Material and Labour for (factory made) precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate solid block, exc 10 cm in width and setting in cement mortar 1:6 complete as in kerb stones etc sizes as required at site & as approved by GE all as specified.

Material and labour for moorum/red bajri filling under floors/ pavings in layers not exc. 15 cm thick, spread, levelled and rammed including watering and consolidated complete all as specified and as directed.

Supply and fix for 100 mm bore PVC (SWR) in any length fixed in cm 1:6 as in weep holes complete all as specified and directed.

VIJ ASSOCIATES

SRI JD CORPORATION

Meet Road Lines

M/s Rahul Traders

Asha Enterprises