WBPWD/EE/KNHED/e-NIQ-75/25-26

Supplying and Delivery of 1.1 KV grade armoured Alminium XLPE cable (Make: Gloster/Havells/Polycab) 4 Core 50 Sq.mm

Laying of 4 core 50 sqmm cable on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe

S & F of Heavy Gauge HDPE Pipe 80 mm Dia

Cost for Hard Metal Cutting & Mending good damages . Around 20 mtr x 0.3 mtr x .6 mtr

Supplying & fixing sheet metal (16SWG)Iron Clad Busbar chambers on angle iron frame on wall, incl.earthing attachment and painting as required–(As per Drawing no. 470 of PWDSpecification Book – May 1991) 100/125 A 4 Bar

Supplying and fixing 415V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic /adjustable thermal and fixed magnetic setting incl enclosure 100 A

Supply and fixing compression type gland complete with brass gland brass ring and rubber ring for dust and moisture proof entry of XLPE/PVC armoured cable. 4 Core 50 Sq.mm

Finishing the end of following XLPE/PVC armoured cables bycrimping method incl. supplying and fixing solderless socket(Dowels make), tapes, anticorrosive paste & jointing materials 4 Core 50 Sq.mm

Supplying and fixing double door 4 way Vertical TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(as per Make: Legrand/ABB/Schneider) INCOMING- Supplying and fixing 415 V, 100A Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in DBs and necessary connection-1No.(Make: Legrand/ABB/Schneider) OUTGOING- Supplying and fixing 240V 63A TP MCB of Breaking capacity 10kA & C characteristics on 1din rail of existing DBs and necessary connection-4 nos.(Make: Legrand/ABB/Schneider)

Supplying and fixing double door 415V,8 way Horizontal TPN MCBDB (Legrand)comprising with of 1no. 63A FP Isolator and 24 nos.,(6- 32)A SP MCB with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.incl 40 A DP Isolator as incomer & 12 Nos 6-32 Amp SPMCB as Outgoing. 2+12 way Enclosure (607712) (make-Legrand/ABB/Schneider)

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (MESCAB/KEI/Gloster) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish. Average run 10 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Polycab/ KEI/Gloster) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB (Only switch Board to be Concealed) on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish On Board

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Polycab/KEI/Gloster) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC for Power point & CB

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC for Separate Plug Point

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC for AC

2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

Supply & fixing CRC sheet metal box(16 SWG) of size175mmx 100mmx 65mm with 3 nos. suiatable size copper bar(Ph,N & E)on hard rubber insulator flushed in wall after cutting brick wall with bakelite/ perpex top cover incl. painting and earthing attachment and supply & fixing 240 v, 2 nos. 6 amp plug socket without top & 2 nos. 6 amp piano key type switch (Both Anchor Make) by cutting perpex cover incl. necy. connection as required.

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 20 A Piano key type Plug Socket (Brand approved by EIC) on sheet metal switch board incl. S & F 100x1 00x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary(AC) connections as required

Supply & fixing step type electronic step type fan regulator(Anchor / Rider)) on existing switch board incl. making connection.

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.(For AC)

Supply and Delivery of 4 feet Industrial box type twin LED tube fitting incl.Supply & Delivery of 2 no. 240V, 20 W LED Tube (Polycarbonate with heat sink) with glare free light distribution with CCT (5000K-6500K) having minimum luminous efficiency of 105 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Havells/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]

Supply and Delivery of 4 feet Industrial box type single LED tube fitting incl. Supply & Delivery of 1 no. 240V, 20 W LED Tube (Polycarbonate with heat sink) with glare free light distribution with CCT (5000K-6500K) having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Havells/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply & Fixing of 230V, 1-Ph, AC ceiling fan of follwing size incl. all accessories. (Make- Crompton /Havells/ Usha / Orient) [BEE 5 star rated] Sweep Size- 1200 mm (48"), Wattage :S 36 Watt, R.PM :S 380, Air Delivery greater than 2 16 C.M.M.Downrod should be suitable size for fixing below False Ceiling

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)

Supply & Delivery of 220V, Single Phase, 50 Hz A.C heavy duty exhaust fan of following sizes having complete metal body. (Make- EPC/ USHA/Orient/CROMTON) [ISi mark, IP55 rated] 25 mm (9"), 4 Blade , RPM ≤ 1400, Wattages ≤ 45 Watt, Sound levels ≤ 49 dB, Air Displacement (In CMH) ≥ 440

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of 23cm(9 inch) Diameter

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes 2.5 Sqmm

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level incl excavation of soil as below: By ISI-M GI Pipe

Connecting the equipments to earth busbar incl. S&F GI (Hot Dip) wire of size 6 SWG on wall with steples buried inside wall as required and making connection to equipmnents with bolts, nuts, washers, as required and mending good the damages.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Supply & Fixing Mini Timer mini control panel on wall comprising of - i) 230 V AC Mini 25 Amp Power contactor , , Coil Voltage -230 Volt AC , ii)Digital timer /Dial type analogue timer 24 Hours capacity , 230 V AC Supply. iii)230V ,25 A DP MCB , C-type , iv) 230 V ,AC toggel switch ,Single pole Double throw , 6A, 230 Volt .V)230 V ,15 Amp ,3 Way terminalvi) 15 amp ,8 way nutral bar vii) Digital Ammeter with necy. interconnection with 1.5 sq. mm cu. flexible wire(Finolex/Haveels).including Ferrule marking & Socketing With in the 6 way SPNDB MCB Enclosure Box . Make- ABB /Cabtree/L&T.

Supplying and fixing 415 V MCB of Breaking capacity 10kA & C characteristics on Dinrail of PVC Loopbox(Make- Syntex/Hensel ) of Size 8 inch x 10 inch incl.Supply & Fixing of Loopbox on wall and painting,connection & provision for earthing attachment 63 A FP MCB for main X Ray Unit

S & F 240v, 25 A, 3 pin plug top with indicator (Cat. No. P9151) and necessary Connections. Make: North- West./Legrand/L&T)

Supply and installtion of LED glow Sign( 6ft x 4 ft) board by various sizes signage made with 3 mm letter height 8", ACP duely moduled in 2'' raise with the help of 2 " x 1.5 " Alluminium/ GI rectangle hollow section frame and thus it became a ACP box where all the connection wire would be hidden inside it. back side covered by galvanised sheeet. 3" raised Acrylic letter made at 3 mm thick imported trans-light Acrylic sheet would be fitted with male female system where high luminated branded LED ( samsung high effieciency) module pasted inside the 3D letter. SMPS for power supply would be fitted inside it. Fixing and fitting with 'L' type angle. ( Matter should be approved by EIC)

AC Work Supply, Installation, Testing & Commissioning of Inverter Ducted/ Concealed type split AC machine (a set of full metal body indoor and outdoor unit) having cooling capacity not less then 5.0 kw with veriable speed rotary/ scroll compressor, refrigerant gas R32/R410 or better , both condenser and cooling coils made of copper tube connecting chord with plug top confirming to IS 1391 (Part-I & Part-II) with all amendments. (Make - Mitsubishi Electric/ Daikin/ OGeneral/ Hitachi/ Voltas)

SITC including vaccumiazation and Nitrogen of testing of following nominal size of soft/hard drawn copper refrigerent piping for Split AC system, complete with fittings, with adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XLPE class -O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for suction and liquid lines, all accessories as per specification etc. as required. 5/8" (15.88 mm.) dia (Soft drawn) Cu. Pipes (As per standard BS864 or ANSIB 16.22) mm incl. 9 mm thick insulation.

1/4" (6.4 mm) dia (Soft drawn) Cu.Pipes(As per standard BS864 or ANSIB 16.22) incl. 9mm thick insulation.

Supply of XLPE Insulated & unarmoured stranded Copper Conductor control cables having following numbers of core for Working Voltage up to 1100 Volts of following sizes [Make Polycab / RR /KEI/ Havells/ Gloster as approved by E.I.C] 4 Core 2.5 Sq.mm

Supply & laying 25 mm PVC Drain Pipe incl Necessary Fittings

Supplying & fixing ODU Stand for 1.5 TR outdoor Unit

(Rate should be quotated including all taxes and duties, GST and considering the value of less cost materials.)

Please Enable Macros to View BoQ information