Construction of R.W. Sub-Division office Building at Saraskana

Civil

Earth work in excavation of foundation in hard soil including dressing levelling the bed etc. complete.

Filling foundation and plinth with sand well watered and rammed with cost carriage royalty etc. etc.

P.C.C.(1:3:6) in foundation and plinth with 4cm. size h.g.c.b. metal including cost carriage etc complete.including watering curing with cost carriage labour royality etc complete.

C.C. (1:2:4) with 12 mm size h.g. c.b. chips with cost carriage royalty of all materials etc.complete.

Providing R.C.C. (M-20) with 20 mm down graded size H.G.C.B. chips including watering curing with cost carriage royality and labour etc complete.

R.C.C. Base & Foundation :-

R.C.C. Plinth Beam :-

R.C.C. Column :-

Ground Floor

First Floor

R.C. C. Lintel :-

R.C.C. Chajja :-

R.C.C. Stair Case

R.C.C. Wall Beam :-

Ground Floor

First Floor

R.C.C. Roof Slab :-

Ground Floor

First Floor

Wall shelf (4cm thick) :-

Supplying ,fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification

Ground Floor

First Floor

Fly ash brick masonry in cement mortar ( 1:6 ) in Foundation & Plinth with cost carriage royalty etc complete.

Fly ash brick masonry in cement mortar ( 1:6 ) in Superstructure with cost carriage royalty etc complete.

Ground Floor

First Floor

12 mm thick cement plaster ( 1:6 ) including watering curing with cost, carriage, royality labour etc complete.

Ground Floor

First Floor

16 mm thick cement plaster ( 1:6 ) including watering curing with cost, carriage, royality labour etc complete.

Ground Floor

First Floor

Supplying, fitting and fixing vitrified tiles in floors of size 600mm X 600mm of approved make conforming to IS : 13755 laid on 200 mm thick cement mortar (1:4) and filling joints with of approved quality including cost of all material, labour T & P ect required for the work all complete.

Fixing of ceramic wall tiles of 6.5 mm thick in dados skriting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry including rubbing and polishing complete including cost of tiles etc. complete.

Fixing of Chequred tiles in floors and steps and landing on 25mm thick bed of cement morter 1:1 etc complete.

Providing fitting, fixing of Al. door with anodized Al door section of 9202 as vertical member, 9201 as top, 9200 as bottom and middle with frame section as 9221 with tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T & P hire charges of drilling machine, labour charges etc complete.

Supplying, fitting, fixing up window (sliding type) made up aluminum Section 977 as windows frame, section No. 4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc complete.

Supplying fitting fixing M.S. grills for window including fixing with all materials labour cost carriage T & P etc complete.

Ground Floor

First Floor

2.5 cm thick grading concrete with C.C.(1:2:2) on roof slab using 6 mm size h.g.chips with watering curing cost carriage of all materials labourT&P etc.complete.

Ground Floor

First Floor

Painting two coats on iron work over a coat a primer including cost, lead etc. of all materials etc complete.

Ground Floor

First Floor

Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.

Distempering two coats to walls with any approved shade over a coat of primer including cost of distemper etc complete.

Ground Floor

First Floor

Wall painting two coats with weather coat of approved shade over a coat of primer on wall surface including cost of weather coat and all materials labour T & P etc complete.

Ground Floor

First Floor

Boundary Wall

Earth work in excavation of foundation in hard soil including dressing levelling the bed etc. complete.

Filling foundation and plinth with sand well watered and rammed with cost carriage royalty etc. etc.

P.C.C.(1:3:6) in foundation and plinth with 4cm. size h.g.c.b. metal including cost carriage etc complete.including watering curing with cost carriage labour royality etc complete.

R.C.C. of M-20 grade with 20 mm & down graded size h.g. c.b. chips with cost carriage royalty of all materials etc.complete.

R.C.C. Base & Foundation :-

R.C.C. Plinth Beam :-

Column & beam :-

R.C.C. Wall Beam :-

Supplying fitting fixing M.S. grills for window including fixing with all materials labour cost carriage T & P etc complete.

Painting two coats on iron work over a coat a primer including cost, lead etc. of all materials etc complete.

Supplying ,fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification

Fly ash brick masonry in cement mortar ( 1:6 ) in foundation & plinth cost, carriage, royalty etc. complete.

Fly ash brick masonry in cement mortar ( 1:6 ) in superstructure including cost, carriage, royalty etc. complete.

16 mm thick cement plaster ( 1:6 ) over brick work with cost, carriage royalty etc. complete. (A/R - 2006 Pg-105/14)

12 mm thick cement plaster ( 1:6 ) including watering curing with cost carriage royalty etc. (A/R - 2006 Pg-103/4)

Wall painting two coats with weather coat of approved shade over a coat of primer on wall surface including cost of weather coat and all materials labour T & P etc complete.

Wiring

Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire: Finolex/ L&T / Anchor / Havels /HPL / V Guard/KEI/ Greatwhite/Polycab) (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti)

-do- Group A

-do- Group B

-do- Group C

Recessed wiring to Fan Point in...

-do- Group B

-do- Group C

Recessed wiring to Call Bell Point in...

-do- Group C

Recessed wiring to Exhaust Fan Point in…..

-do- Group C

S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof.

S/F of Angle holder replacing Ceilling Rose (Make : Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti)

Swich Boards

S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti)

S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required. (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti)

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti)

S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket & Mini DP MCB, connection, painting etc as required for AC&Gyser. (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti)

S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover. (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti)

S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection. (Make : Anchor / Cona/ Greatwhite/ Havells/ Legrand/ L&T)

S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.

2 Modular box with base & cover

4 Modular box with base & cover

6 Modular box with base & cover

8 Modular box with base & cover

12 Modular box with base & cover

Sub-Main

Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire: Finolex/ L&T / Anchor / Havels /HPL / V Guard/ KEI/ Greatwhite/ Polycab)

Inverter wiring (1x1.5smm) Copper wire (1.19.1)

Circuit Breakers

S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) (Make : Anchor / Cona/ Greatwhite/ Havells/ Legrand/ L&T)

Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.)

S/F of MCB 12 way Single door (2.3.3)

Main switches

Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.)

S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 )

Earthing

S/F of G.I.Earth Plate Earthing 600 mm x600mmx6mm with Salt & Charcoal for Earth electrode (3:4)+(3.6)

S/L of 25mm x 6mm G.I. earth strip in ground(3:10)

Fittings

Providing & fixing plain 16/0.2mm twin twisted flexible, FR PVC insulated copper cable in polythene sleeve or conduit of suitable size on the floor/wall or side of the table/door etc as required.(1.31)

Supply and fixing of 225mm Exhust fan with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delux R/ Orient-Power Flow DBB/ Pollycab -Fresh on DBB )

S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30)

S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections ( Make- Crompton/ HPL/ Polycab/ Havells/ / Panasonic/ RR/Crompton )

SITC of 1200mm Sweep BLDC Ceiling Fan with Aluminium Blades having watage not more than 28 watt & Air Deleivery ≥ 215m3/min. (Replacement warranty will be 4 years) (Make:Usha-Techinix /Crompton- Energion Groove/Havells-Efficiencia Neo)

S/F step type modular fan regulator

Supply & fixing of superior type Led bulk head fitting general domestic use ISI marked square / oval type including necessary connections. ( M-5 ) (Make: Havells/ Bajaj/Equivallent Make)

Supply and fixing of 30-35 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections (Make- Crompton/ Phillips/ HPL/ Polycab/ Havells/ Panasonic/ RR/ Orient )

Supply and fixing of 45-48 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections (Make- Crompton/ Phillips/ HPL/ Polycab/ Havells/ Panasonic/ RR/ Orient )

S/F of 15w Watt LED Bulb (Make- Crompton/ Phillips/ Havells/ Panasonic)

S/F of 1.5T 3Star inverter model split type AC Machine, (Make-Carrier/Daikin/Hitachi)

S/F of 4KVA Automatic Voltage Stabilizer(90-300V), (Make-Microtech/V-Guard)

S/F of 2000 VA/24V Inverter with 2 nos. 180Ah battery including trolley arrangement (Make: V-Guard/ Microtake/ Luminous)

S/F of 12W LeD Squre (10"×10") LSDSMN-12W-WW with surface Panel rings (Havels/crompton/philips/panasonic)

Cables

S/F of 4 sqmm twin core unbonded aluminium service connection wire with no.10 G.I. Guard wire to support the aluminium wire Make: Gloster/ KEI/ Finolex/ Anchor/ Havells/ V-Guard/ HPL/ L&T/ Greatwhite/ Pollycab)

Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. (a) 1st depth

2nd depth-

Supplying all materials,labour,T&P and filling in F&p with river sand well watered and rammed including conveyance of all materials to worksite,payment of royalty,taxes etc.all complete as per direction of E.I.C. (a) Ground Floor

Supplying all materials,labour,T&P and providing cc(1:3:6)with 40mm HG metal including watering, curing and conveyance of all materials to site payment of royalty,taxes etc all complete as per direction of the E.I.C.

Supplying all materials,labour, T&P and providing PCC(1:1.5:3) with 12mm size HBG chips including watering,curing and conveyance of all materials to site payment of royalty,taxes etc all complete as per direction of the E.I.C.

Supplying all materials,labour,T&P and providing brickwork with KB brick having crushing strength not less than 75kg/cm2 with dimensional tolerence of +/-8%in cm(1:4) including watering, curring, conveyance of all materials to work site,payment of royalty, taxes etc all complete as per P.H specification and direction of E.I.C.

Supplying all materials,labour,T&P and providing 12mm thick CP(1:3)on brick work with punning for skirting including watering,curing,conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials,labour,T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including conveyance of all materials to work site, payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. 4.759sqm

Supplying all materials, labour, T&P and providing MS reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials,labour,T&P and providing RCC (1:1:5:3) with 12mm size HG chips for RCC works including hoisting, laying, watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials,labour,T&P and providing cement flush pointing (1:3)to brick masonry including watering, curing, conveyance of all materialsto worksite payment of royalty taxes etc all complete as per specification and direction of E.I.C.

Supplying all labour T&P and making m.s step iron in 20mm dia m.s steel bar and fixing into walls of MH/ Septic tank dullyembedded as per direction of E.I.C.

Supplying all labour T&P and providing 50mm thick pre cast RCC baffle walls in cc(1:1.5:3)with 12mm size bhg chips fitted and fixed in position and finished smooth etc all complete as per direction of E.I.C.

Supplying all materials,labour,T&P and providing 550x550x100mm thick RCC precast MH cover in cc (1:1.5 :3) using 12mm size hbg chips, placing the cover on the MH/S.Tank & finishing smooth etc all complete including watering, curing, conveyance of all materials to worksite, payment of royalty,taxes etc all complete as per the specification and direction of E.I.C.

Supplying all materials,labour,T&P and providing, fitting and fixing of 110mm dia PVC Tee in wall of S.Tank including filling the recess with cc(1:1.5:3)with 12mm size BHG chips including watering,curing, conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per the direction of E.I.C.

Filling in F&P with excavated materials,including watering and ramming as per the direction of the E.I.C.

Supplying all materials,labour,T&P and providing CC(1:2:4)with 12mm size and HBG chips including watering, curing, conveyance of all materials to worksite payment of royalty, taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials,labour,T&P and fixing ceramic tiles/marble tiles/chequered tile in floors, treads and landing on 25mm thick bed of cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per the specification and direction of E.I.C. (a) Ground Floor .

Supplying all materials,labour,T&P and fixing porcelain glazed tiles/marble tiles/kota tiles/ kodappa tiles on 12mm thick CP(1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per the direction of EIC. (a) Ground Floor

Supplying all labour materials T&P fitting fixing of AL. door frame with OEL Anodized Al. Door section of 9202 as vertcal member,9201 as top member and 9200 as bottom and middle member and 12 mm thick pre-laminated board in bottom portion fixed on door frame by meams of tapered clip NO-4660 and the frame by means of jointing angle NO-185 including all cost of labour ,T&P ,hire charges of drilling machine ,labour etc all complete as per the dir of EIC

Supplying all materials,labour,T&P and fitting & fixing of U-PVC SWR soil waste ventilating pipes & fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C. (a) 110mm dia PVC pipe

110mm dia PVC'P' trap

110mm dia.PVC D/J/D

110mm dia.PVC H.R.Bend

110mm dia.PVC Door Bend

110mm dia PVC Plain Bend

110mm dia PVC offset

110mm dia PVC Cowl

125mm dia CP greatings

Supplying all materials,labour,T&P and cutting holes through brick/stone masonry walls for taking PVC pipes and fittings including making good the damages etc. all complete as per the P.H. specification and direction of E.I.C. (a) 250mm to 375mm thick wall

Roof cutting

Supplying all materials,labour T&P and fixing wash down water closet(E.W.C) of ISI mark of with integral 'S' or 'P' trap to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C. (Hindware/Parryware/Cera/Equivalent)

Supplying all materials,labour,T&P and fixing of plastic seat cover for E.W.C with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C. (Hindware/Parryware/Cera/Equivalent)

Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipeby means of white lead mixed with chopped hemp etc all complete as per specification and direction of the E.I.C.

Supplying all materials,labour,T&P and fixing wash basin of ISI mark of with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in walls and good the damages etc. all complete as per specification and direction E.I.C . (Hindware/Parryware/Cera/Equivalent) (a) 550mmx400mm size WHB

Supplying all materials,labour,T&P and constructing inspection chamber of the following sizes with cc(1:3: 6)using 40mm size HG metal on bed,1st class K.B brickwork in cm(1:6), moulding & shapping the channel inside&benching with cc(1:1.5:3)using 12mm size HG chips,12mm thick cp(1:3) with punning to inside, cement flush pointing(1:3)to outside,RCC coverslab in cc(1;1.5:3) using 12mm size HG chips with RCC MH cover in excavation in all kinds of soil & refilling the cavity around the chamber including watering,curing, conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per approved specification & direction of the E.I.C. Size (760mmx760mmx460mm)

Supplying all materials,labour,T&P and laying of 110mm dia. PVC pipes,in trenches(to level or slope) and jointing with supply of approved rubber lubricant by nonheat application method using 40mm bhg metals on bed of the trenchand hunching or allround concrete encasing with cc(1:4:8)using 40mm size h.g metal including curing,conveyance of all materials to worksite,payment of royalty,taxes etc.and testing all complete as per approved drawing,design,specification and direction of E.I.C. (A)110mm dia PVC pipe with allround encasing

Supplying all material,labour,T&P and constructing soakway pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brickwork in cm(1:6)for the remaining height at top, 12mm thick CP(1:4)inside and outside over masonary brickwork gravel packing in the rear of well steining, RCC coverslab in cc(1:1.5:3)using 12mm size h.g chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling the cavity around the pit & painting the iron wirk, watering,curing,conveyance of all materials to worksite,payment of royalty,taxes etc. all complete as per approved drawing,specification and direction of E.I.C. (a) 1.20m dia x 2.00m deep Inside Size

Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast R.C.C rings joined loose gravel backing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. (a) 1.20m dia x 1.80m deep RCC Ring Soak Pit

Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tankconforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.L and placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. (A) 1000 lits capacity on the roof of ground floor

Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.(A) 1000 lits capacity on the roof of ground floor

Supplying all materials,labour,T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80) and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C. (a) 20mm dia C-PVC PVC Pipe (Internal)

25mm dia (ASTM )PVC Pipe

15mm dia PVC inlet Connection Pipe

32mm dia PVC Waste Pipe

Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.

Supplying all materials,labour,T&P and cutting holes in RCC,floors,roofs etc. upto 19cm thick for passing G.I/PVC pipes and fitting etc. and repairing the holes after insertion of pipes etc. with cc(1:2:4)including finishing complete so as to make it leak proof as per direction of E.I.C.

Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C. a)upto 300mm wide

Supplying all materials,labour,T&P and fixing brass/CP fittings conforming to IS 781 of the following nominal bore with supply of all jointsing materials complete as per specification and direction of E.I.C. (Plaza/Amber).

15mm dia C.P Bib Cock(L.B)

15mm dia C.P Twin Bib cock

15mm dia C.P Health Fuccet

15mm dia C.P Pillar cock

15mm dia Angle Stop Cock

15mm dia Concealed Stop Cock

15mm dia CP Flange

15mm dia CP Extension Piece

25mm dia PVC Ball valve

Supplying all materials,labour,T&P and fitting and fixing 10Ltrs capacity PVC low level flushing cistern with a pair of C.I/MS brackets complete with fittings such as syphonic arrangement,15mm nominal size Brass/PVC ball valve with polythene float,CP/Brass handle,unions and couplings for connection with inlet,outlet,overflow pipes,32mm dia PVC flush bend,15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C. (Hindware/Parryware/Cera/Equivalent) (a) 10 lit PVC L/L Cistern

Supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C. 600mmx450mm size (fixed type)

Supplying all materials,labour,T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specifications and direction of E.I.C.

Glass self

Supplying all materials,labour,T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of E.I.C. (a) 20mmx450mm long CP towel rail

CP towel ring

Sinking of 125mmx100mm dia Tube well by fast drilling Sofasticated Rig.Labour for drilling of perfactly vertical bore holes as specified dia.For a specified depth rock with down the hole hammer drilling rig combination drilling rig as required to soil,the soil condition as per direction of E.I.C including supply of rigs with all accessories,T&P consumable etc for lowering 125mm dia PVC pipes for casing fitted with sockets, washers and without well screen as per the necessity for the soft,medium and hard formation (PCV/G.I) casing pipes for the over borden is to be provided by the contractor including lowering and drawing after complete of tube well.Tube well(1No).(a)Drilling of 125mm dia. Bore-

Drilling of 100mm dia. Bore-

Lowering the following G.I/PVC pipe confirming to ASTM-D-1785/89(sch-80) with or without soltted pipes as per necessity from ground level upto 30.00mtr depth and fitted and fixed in perfecty vertical position including cutting and threading pipes and soltted pipes and supplying and fixing of all jointing material,T&P etc the top of the casing pipe threaded including piping tube well to prevent entry of foreign materials from above(PVC/G.I) supplied by the contractor (including cost of pipe) (a) Lowering of 125mm dia PVC pipes:

Cost of 125mm dia PVC pipes:-

Cleaning and developing the tubewell with their own compressor contineously worked till clean and adiquate discharge is obtained from the tube well including supply of & use of all necessary equipments and labour as per the direction of E.I.C.

1.00H.P.Single Phase Submersible Pump Set Supplying of I.S.I.Mark 1.00H.P.Single Phase Verical Submersible Pump Set with discharge of 1800-2200 ltr./hour and a head of 45-60mtr of reputed make like KSB/Texmo & equivalent including all cost, conveyance and taxes etc all complete as per direction of E-I-C.

Supplying all labour,T&P and fitting and fixing of 1.00H.P Single phase vetrical Submersible Pump Set with commissioning and testing etc.all complete as per direction of E.I.C.

Supplying and fitting and fixing of I.S.I.mark D.O.L Starter of reputed make like BCH or equivalent for 1.00H.P Single Phase Submersible Pump including all cost,conveyance of all taxes etc all complete as per direction of the E.I.C.

Supplying and fitting and fixing of three core flat cable(1.5mm2) of I.S.I. make of reputed company like BCH/Finolex or Equivalent and connecting the pump and starter including all cost, conveyance and taxes etc all complete as per direction of the E.I.C.

Supplying and fitting and fixing of plastic rope MS Well cover,MS Clamp,stainless steel short piece,bend &socket including all cost ,taxes etc all complete as perdirection of the E.I.C.

Supplying and fitting and fixing of HDPE Pipes & pipe fittings with making connection to pump set including all cost conveyance and taxes etc all complete as per direction of the E.I.C.

Please Enable Macros to View BoQ information