Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.9 LAccepted-AOC 601 6TH FLOOR MANGOOR VALLEY NEAR GURUDWARA MANGOOR HILLL VASCO DA GAMA GOA 403 802 | SOUTH GOA | GOA | 403802 | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹30.4 L+₹51,515 (1.72%)Rejected-AOC FLAT NO 4 VIRGINIA CO OP HOUSING SOCIETY AIR PORT ROAD CHICALIM VASCO DA GAMA GOA 403 711 | SOUTH GOA | GOA | 403711 | L2 | Rejected-AOC REJECTED | |
| 3 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹35.5 L
EMD Value
₹71,000
Closing Date
28 Mar 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER GOMANATAK
GARRISON ENGINEER GOMANTAK VASCO DA GAMA PIN 403802
Addition Alteration and Improvement to the Existing STP of Gomantak Special Repairs Replacement of BER ACs at NIH and Addition Alteration to Infrastructure for Women Sailors at NIH Goa Building No P185 P52 under GE Gomantak Vasco
2023_MES_584372_1
8504/E8
Open Tender
Support/Maintenance Service
Item Rate
180 days
VASCO DA GAMA
Refer tender documents
8 documents required · 8 mandatory
₹500
GE GOMANTAK
₹71,000
Yes
6 Apr 2023
4 Mar 2023
29 Mar 2023
4 Mar 2023
28 Mar 2023
16 Mar 2023
Amount
M & L for Disposal of top gravy sludge layer by Night Soil Tankers of capacity(8 KL) from Aeration Tank, Secondary Settling Tank, Filter Feed Tank & Final Water tank ,Collection Tank, Raw water Tank. all as directed .
M & L for cleaning all walls & roof of sewage collection tank and disposal of thick settled sewage sludge which cannot be removed through using night soil tankers all as directed.Note : Thick layer of sludge wiil be dispose in secure in house premises area by land filling.
Supply,Install,testing and commissioning of Sewage Pump of capacity 5HP,3 phase,Flow-12m3/hr ,18 mtr head, Solid Handling capacity-15mm, suction/delivery 80mm/80mm,1450 RPM complete including all plumbing work reqd for making connection to exisiting pipeline all as directed by Engr-in-Charge.Make Kirloskar Model SP3LM or equivalent in Crompton,Shaktipumps.
Supply and Install Auto Operated Panel Board for automatic operation of pumps incl low & high level sensors, dry run protections, Single phase protectors suitable for 5 hp motors. MCB of suitable size,Relays,capacitors and indicating lamps complete all as directed by Engr-in-Charge.
M & L for Brick masonary Bar Screen Chambers of Size-600X600x500mm along with bar screen of SS-304 Size-600X600 mm complete all as directed by Engr-in-Charge.
M & L for Box screen above aeration tank of SS 304 ,Size-3.0 mm core screen ,Size- 600X600X300 mm all as directed.
Supply,install & testing Air Blowers twin Lobe Rotary type ,Capacity :120 m3/hr with 0.5 kg/cm2 pressure Induction Motor-2 HP incl suction filter, Pressure relief valves, NRV, Pressure gauge etc. all as directed by Engr-in-charge. Make: Airvak/A1/Everest
Supply,install & testing of Effluent Feed Pump ,Self priming monobloc pump, Capacity-1Hp,Head range-8-15mtr, Flow-2.5-4.5LPS all as directed by Engr-in-charge. Make- Kirloskar/KSB/Welo
Supply,install & testing of Return Sludge pump Capacity-1Hp,Head range-6-13mtr,Flow- 2.5-4.5LPS all as directed by Engr-in-charge. Make-Kirloskar/Shakti pumps/
Supply,install & testing of Permeate pump Capacity-1Hp,Head range-6-13mtr,Flow- 2.5-4.5LPS all as directed by Engr-in-charge. Make- Kirloskar/Lubi/KSB
M & L for MBR membrane modules Capacity-75 kld,Pore Size- 0.04 micron,Modules with air skirt, O ring, header plates,Permeate from both end. all as directed by Engr-in-Charge. Make-UF- PVDF membrane or equivalent
Supply,install & testing of Electrical panel board including Fittings cables.(PLC Auto system) Including MCB, Relay, Capacitors, OLR,SPP,Powder Quoted Panel Box..,dicating Lamps, Push Buttons, Starter Switches ,Internal wiring, Timer switches etc. all as directed by Engr-in-Charge.
M & L for Chemicals Dosing Tank along with system,Electronic Diphagram types,Flow- 0-6 lph withTank- 100 lit all as directed by Engr-in-Charge.
Supply & Installation Of Diffusers Aqua-flex Fine bubble Membrane diffusers with retrieval arrangements. EPDM Membrane Diffuser complete with PVC tube, high efficiency EPDM Membrane, SS clamps all as directed by Engr-inCharge.
M & L for UV System,Flow- 1.5 m3/hr Make-Alfa,Inlet & outlet line – 1” BSP,Reactor Chamber MOC- SS30 all as directed by Engr-in-Charge.
M & L for Fabrication & Plumbing work for diffusers ,Support rack for MBR module,Plumbing lines for newly installed pump ,Plumbing materials like pipes & fittings all as directed by Engr-in-Charge.
M & L for cleaning all walls & roof of sewage of Aeration Tank, Secondary Settling Tank, Filter Feed Tank & Final Water tank ,Collection Tank, Raw water Tank. and disposal of thick settled sewage sludge which cannot be removed through using night soil tankers all as directed.Note : Thick layer of sludge wiil be dispose in secure in house premises area by land filling.
Charges for Commissioning of STP Unit including the following:- 1.After cleaning & servicing of equipments wet run test of equipments’ . 2.Addition of new culture by night soil tankers. 3.Commissiong of STP units respect to culture growth, quality of water. 4.Preparation of SOP, Provision of logsheet (1 month), manual for STP. 5.Training to STP personal for operation of STP unit Note:- Old Motors & other accessories/parts of existing STP plant retrieved from site will be handed over to depatment.
Taking down of split AC/Window AC from existing place and placed all Acs to store complete all as specified and directed by Engr-in-Charge.
Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with inbuilt air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 1.5 TR with copper tubing condensor with all necessary fixing arrengment and accessories including mounting bracket for outdoor unit. PVC Drain pipe with necessary fittings should be provide up to ground and making good disturbed surfaces of walls floors etc. Note: (1)The cost of AC also includes cost of copper tubing and insulation as per manufacturer. (2) If extra copper tubing , insulation and drain pipe required at site, the same will be measured and paid seperate under respective item of sch.Insulate with white tape over the insulation of copper tubes.Make: Daikin / Carier/ Hitachi.
M&L for voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 190 volt to 280 volt with output voltage stabilized at 230 volt with accuracy of +/- 2.5% for capacity 5 KVA. Make : V Guard/ Microtek/ Servomate
Supply & Fixing of DBOXX protected socket AC Box with one single pole MCB 240 Volts 20 Amps. Make: Havells / Anchor/ Legrand
Supply & Fixing Submain wiring with 4 sqmm three runs (Phase, neutral and earth) of single core multi stranded FRLS unsheathed PVC copper conductor cable 1100 Volts as per colour code drawn through and including casing capping of suitable size including all accessories as required and connecting to Existing main switch board/DB & testing on completion including dismantling old unserviceable submain wiring complete.
S&F MCB SP 06 to 32 amps 230 volts C curve, 50 HZ AC 10 KA Make: Havells/Legrand/C&S
Supply and fix insulation for copper tubes of split type AC units,insulation type superion of size 3/8"diameter
Supply and fix insulation for copper tubes of split type AC units,insulation type superion of size 5/8"diameter
Supply and fix in repairs copper tubing soft grade suitable for split type AC suction /discharge line of size 5/8" diameter
Supply and fix in repairs copper tubing soft grade suitable for split type AC suction /discharge line of size 3/8" diameter
Supply and fix PVC insulated multy stranded copper conductor 3 core 4 Sqmm. Make:Havells/Polycab/Anchor
Supply and fix in repairs PVC pipe 20 mm for drain water pipe line including fittings
M & L for point wiring complete with 1100 V grade PVC insulated and unsheathed multistranded 1.5 sqmm single FRLS core copper conductor cable drawn through and including PVC concealed conduit with all accessories including 1.5 sqmm PVC insulated and unsheathed FRLS copper conductor cable as earth continuity wire all as specified for one light, fan, 5 Amps socket outlet in same board, etc and making good disturbed surface of walls and floors to match with existing surfaces.
All as per item No 31 but 2/3 pin socket out let 5 Amps with 1.5 Sqmm on independent board.
Supply & Fixing modular switch 1 way 6A, 1 module, 230 volts.
Supply & Fixing modular socket 6A,2/3 pin combined, 2 module.
Supply & fixing modular metal flush box 3 module.
Supply & fixing modular white cover plate with frame, 3 module
Supply and fix ceiling rose surfaces bakelite 65 x 50 mm three terminals including supply and fix PVC plate or square blocks.
Supply and fixing 10W 2ft long LED Inverter batten light fitting complete Cat part No.LHEXACP7FN1W010 or equivalant with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size .
Supply & fixing exhaust fan 300mm sweep(metal body), heavy duty, 230 volts with louvers including making suitable size of hole in the wall suit the fixing of new exhaust fan and making the disturbed surface good as per exisiting all as directed by Engr-in-Charge. Make : Usha/Havells/Bajaj
Demolition of concrete of any description and in any position including floor tiles of any description complete all as specified and directed by engineer in charge.
Dismantling floor,hearth or wall tiling including cement mortar bedding (including backing),removing serviceable tiles to store and rubbish off the premises.
Demolition of brick work or stone/boulder masonary built in cement mortar,complete all as specified.
M&L for pre cast cement concrete type C1 (1:3:6) block masonary with solid blocks, exc. 10 cm in width and setting in mortar (1:4) complete all as specified and as directed.
Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including raking out joints, hacking for key,scrubbing down with water etc complete all as specified and as directed.
M&L for 15 mm thick rendering on brick work in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of new plastered surface & applying two coats of oil bound distemper (OBD) over a coat of white chalkening on wall complete all as specified and directed by engr in charge.
M&L for glazed ceramic coloured tiles in vertical surface of size 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tiles laid over and including 10 mm thick cement plaster in CM 1:4 complet all as specifoed and as directed.
M&L coloured non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed of CM 1:4 complete all as specified and directed by engr in charge.
M&L coloured non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm but in skirting including necessary cutting of tiles and rendering 10 mm thuck CM 1:4 on vertical surfaces complete all as specified and as directed by engr in charge.
M&L coloured non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement with pigmnet to match the shade of tiles over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed by engr in charge.
Dismantling boarding, any description, fixed in any position with nails as specified and as directed.
S&F powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F of powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m ncluding necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.
S&F Aluminum powder coated deco grill make DG 104 (10 mm thick section) with frame of section not less than 0.136 kg/rm complete all as specified and as directed.
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.
S&F aluminium alloy anodised wire mesh of size 1.5 mm x 3 mm mesh 20 Gauge thick of approved make complete all as specified and as directed.
S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete.
M & L for two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome primer complete all as specified and as directed.
S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube complete all as specified and as directed.
Factory Made Solid PVC Moulded Door Shutter with particle boards, 28 to 30mm thick (stiles), with 2 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face complete all as specified and as directed.
S&F Aluminium alloy anodised sliding door bolt 150 mm long with hasp, staple and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified and as directed.
S&F Aluminium handles, cast type, anodised 100 mm long complete all as specified and as directed.
S&F Aluminium, anodised barrel tower bolts 100mm long of extruded section and fixed complete all as specified and as directed.
S&F Butt hinges, 100mm long, medium weight, stainless steel complete all as specified and as directed.
S&F Pillar taps, 15mm dia, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs complete all as specified and as directed.
S&F Swivel shower of C P Brass any colour for fixing with 15mm pipe .(Minimum weight 40gms) fixed in repair complete all as specified and as directed.
S&F Shower arm 15mm size,195mm long with bend of 45degree with flange of CP brass any colour. (Minimum weight 40gms) fixed in repair complete all as specified and as directed.
S&F in repairs health facet with 1 metre (min) extendable metal tube and holder and fittings of make "Jaguar" complete all as specified
S&F in repairs Stainless steel soap dish standard size heavy complete all as specified and as directed.
M/S jvsr constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .