REPAIR/REPLACEMENT TO MISC SECURITY INFRASTRUCTURE RELATED WORKS INCLUDING OTHER CONNECTED WORKS IN DEPOT AND ADM AREA AT 15 FAD JINDRAH UNDER GE ARMY DHAR ROAD

Amount

M & L rendering 15 mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces finished fair and even (using water proofing compound) max upto four storey and below including scaffloding complete all as specified and directed. Note : WPC shall be measured and paid separately)

M & L rendering 10mm thick in cement mortar 1:3 on fair faces brick work or concrete surfaces finished even and fair after applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered ax upto four storey and below including scaffloding complete all as specified and directed in SSR Part I 14.22.

Supply only integral water proofing compound complete all as specified and directed.

M & L for preparation of new plastered surface of walls, priming plastered and other surfaces with a coat of alkali resistant priming paint and applying two coats of cement base paint white or tinted complete all as specified and directed

M & L for preparation of new rough cast plastered surface of walls, priming plastered and other surfaces with a coat of alkali resistant priming paint and applying two coats of cement base paint (in camouflage pattern) complete all as specified and directed

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including racking out joints , hacking for key, scrubbing down with water, etc. max upto four storey and below including scaffloding complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S & F mild steel framed work such as grills, grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M & L preparing surfaces of wood and wood based materials, steel and iron work, new or old, treating small articles such as stop, covers, gully grating, holdfasts, ends of posts, back of chowkats, etc., area not exc 0.1 sqm and treated with tar or coal tar black paint, each complete all as specified and directed

M & L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide zinc chrome primer complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed

M & L for cement concrete 1 : 2 : 4 type B 0 (using 12.5 mm graded stone aggregate ) as in coping, for water trough and the like including weathering, slightly rounded or chamfered angles and throating etc incl necessary form work etc complete all as specified and directed.

S & F broken glass coping on top of walls in cement mortar 1:3 and complete all as specified and directed.

Restraining resecuring including making good staples etc, of galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. all as specified and directed

Demolition of cement concrete (reinforced) (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for (below or above GL) complete all as specified and directed

Use and waste form work to sides and soffits of floor or roof beams, beams haunching, girders, bressummers, lintels, cantilevers, shelves including supports, over hangs, etc. also splays between floors and beams etc for flat rough finished surfaces of concrete complete all as specified and directed.

Use of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete walls, floor and roofs not exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but not exc 20 cm wide for rough finished surfaces of concrete complete all as specified and directed

M & L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L mild steel TMT bars 6 mm to 8 mm dia for stirrups and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for providing RCC 1 : 2 : 4 Type B1 (20 mm graded aggregate) for slabs supported on walls, beams and column in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stoneswork and precast concrete articles complete all as specified and directed

M & L brick work with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L brick work with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 but (except bricks) complete all as specified and directed.

S&F in repairs circular concertina coil punched tape (incl spikes and handle) with 50turns and loop dia 750mm, width of barbed 9mm dia and spacing clips 23.5mm to 24.5mm c/c and weight of coil not less than 10 to 14 kg without packing, coil length will be 6meter when opened up etc, fixing at any position / at any height, binding with angle iron ground pickets and binding of coils with clips and binding wire as per manufacturer's instructions & sample as approved by GE / EIC complete all as specified and directed

Deduct Schedule of Credit of Rs. (-) 72375.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.

K S BUILDERS (BID ID -3299546)

PARAS RAM ASGOTRA AND SONS (BID ID -3301832)

M/S SHUBAM ENGINEERS (BID ID -3311499)

SUBASH CHANDER (BID ID -3302308)