CONSTRUCTION OF PRIMARY SCHOOL AT SARAIBINDHA , G.P-KATHALBARI , BLOCK- PATHNA , DIST-SAHIBGANJ

site clerance

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item B) and disposal of excavated to a distance up to 50 M. including all lifts ,leveling ,ramming the foundation ,trenches removing roots of trees ,shrubs all complete as per approved design ,building specification and direction of E/

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume).

Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

Providing designation 75A brick work in C.M (1: 6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. BCD - 5.2.3.

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size)

Providing designation 75 A brick work in C.M. (1: 6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I

Providing 125mm thick reinforced designation 75A brickwork in C.M. (1:4) in Superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, cost of materials, racking out joints to 15mm depth, carriage, taxes and royalty (but excluding the cost of reinforcement) all complete as sper building specification and direction of E/I.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Providing and laying single layer of tar felt of standard make including cleaning the surface with brushes and cloth soaked in K. oil laying first layer of hot bitumen a/r 1.5kg . Per m² second layer of tar felt and third layer of hot bitumen a/r 1kg per m²,top finished with gravel, moorum, river shingles or sand a/r 0.057 m³/m² as per I.S.S manufacturers specification and direction of E/I

Providing Precast R.C.C M-200 with nominal mix of (1:2:4) lab of desired size with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse send of FM 2.5 10 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes & royalty all complete as per building specification & direction of E/I (5.3.30.)

Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral staircases

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers

Providing 12 mm thick water proof cement plaster (1:3)withclean coarse sandofF.M.1.5with5%cicooranyother approved water proofing compound includingscreening,curingwithall leads and liftsofwater, scaffolding taxesand royalty all complete as per building specification and direction of E/I

Providingand fixing fanhookof16mm diaM.S.bar1metrelongbenttorequired size and shape, placed inpositionand fixed inR.C.C. slabbeamat the timeof casting all complete as per building specification and direction of E/I

Providing Tor steel reinforcement of 8mm. dia. rodsasperapproveddesign anddrawingexcluding carriageofM.S. bars toworksite , cutting, bendingand bindingwithannealedwirewithcostof wire, removalofrustplacingtherodsin position all complete as per building specificationanddirectionofE/l.TMTFe 500(a) 8 mm dia.

Supplying, fitting & fixing M.S.GRILL made of 20x6 mm flat as per approved design and drawing properly fabricated with joints continuous fitted, welded and finishing smooth, hoisting as per building specification and direction of E/

Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I

Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge.

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C'

Providing 50mm thick 2nd class patent stone flooring (1:2:4) with 20mm, to 6mm size graded stone chips finished with flooring coat of neat cement in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Filling in foundation trenches and plinth in layers. Not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing and laying 6mm. precast white glazed tiles in walls over 12mm. cement mortar (1 :3) and iointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes, and royaity all complete as per building specification and direction and of E/1

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm

Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I

Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Add carriage cost of Materials i) Cement + Steel lead 05 km

ii) Sand lead 22 km

iii) chips lead 15 km

iv) Bricks lead 75 km

Supplying and Laying of PVC Pipe -do-do-E/I 15mm Dia

20mm Dia

25mm Dia

Providing and fixing 15mm dia brass bib cock of approved quality all complete as per specification and direction of E/I 15mm dia

Providing and fixing 15mm dia brass stop cock of approved quality all complete as per specification and direction of E/I 15mm dia

Providing and fixing Gun metal non return volve approved quality all complete as per specification and direction of E/I 15mm dia

Making holes in walls for PVC pipe and restoring the same all complete (water supply pipe)

S/F/F 40mm high vitreous white glazed earthen E.WC with 'P' Trap of Parry

Providing and fixing 110mm dia UPVC Tee door single Qaulity

Providing and and fixing 110mm dia UPVC pipe

Providing and and fixing 110mm dia UPVC Band

S/F/F UPVC Fitting (i) Crowel 100mm dia

(ii) floor trap 100mm dia

Supplying materials and labour for constructing inspection chamber of designation class 75B brick sixe 750mm deco 600×450mm internal dimention having 250mm all thickness in cement plaster(1:4) with punning on inside and cement plaster (1:6) specification all cost complete as per direction of E/I

Supplying fitting & fixing PVC water storage tank -do-do-E/I

Cost of drilling 200×165×125mm deep bore well in all kinds of soil and rock in rural area for installation of pump set with hydraulic D.T.H rig machine all complete including supplying all materials,tools ,drilling rig air compressor and equipment as well as fuel laboricants and cost of transportation of rig machine and other vehicles upto the site 1.from 0-50mtr depth below G.L

2.from 50-150mtr depth below G.L

Supplying all tols tackles & lowering of 200mm mm dia MS ERW Casing pipe of 6mm wall thickness including all taxes,VAT,Excise duty,freight charges with inspection chaeges etc as applicable etc all complete job

Supplying all material, labour & equipment of fittting 200mm dia m.s cap cover casing pipe all complete job

Supplying ,flat flexible submersible cable with copper conductor PVC insuleted & PVC sheathed as per IS:7098

supplying Fitting & fixing make 1.5 H.P Submersible pump 150mm Dia (with Bronze impleller)upto 8 stage

supplying Fitting & fixing fully Automatic star delta stater to oprete induction motor working on415Volt 3Phase 50HZ with No Volt coil over load element ON-OFF push bottons with necessary materials and connected to supply, etc complete stater with original sheet steel incloser as per IS:3914

Providing and fixing Lowering CPVC Pipe 32mm dia in drilled tube well in m Mtrs. Length all complete as per dirction E/I including carriage of materials

Wring for light point/exhaust fan point /call bell point with 1.5 sq. mm FR PVC insulated copper conductor single core in surface/recessed PVC conduit, with modular switch, modular plate suitale GI box etc as requried Group A

Twin control Point in PVC conduit, with piano type switch:- Wring for twin control point with 1.5 aq. mm FR PVC insulated copper conductor single core in surface/recessed PVC conduit, 2 way piano type switch, phenolic laminated sheet with sutible size PVC/MS box etc as requried

Power plug wring in PVC conduit (2x4sqr. Mm) :- wring for Light/power plug with (2x4 sqr. Mm FR PVC insulted cpper conductor single core in surface/recessed PVC conduit, along with 1 no. 4 sq. mm FR PVC insulated copper conductor single core for loop earthing etc as required.

Circuit /submain wiring in PVC conduit:- Wiring for circuit/ submain wiring along with earth wire with the following size of FR PVC in insulted cpper conductor single core in surface/ recessed PVC conduit as required (2x 1.5 sq. mm + 1x1.5 sq. mm)

(2x 2.5 sq. mm + 1x2.5 sq. mm)

S/F light plug point with modular accessorise:- Supplying and fixing suitble GI box with modular plac and cover in front on surface of in recess, including providing and fixing 3 pin 5/6 amps mdular socket outlet and 5/6 amps modular switch connection, painting etc. as requried ( for light plug to be uded in non residential building )

S/F Power plug point with modular accessorise:- Supplying and fixing suitble GI box with modular plac and cover in front on surface of in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch connection, painting etc. as requried ( for light plug to be uded in non residential building )

Supplying and fixing of folowing size of PVC conduit of PVC conduit along with accessores in surface/ recess including citting the wall and making good the same in case of recessed conduit as requied. 20 mm

Supplying and fixing of folowing modular switch / scoket on the existing mdular lpate & switch box including connections but excluding modlar plate etc. as required.

5/6 amps, 3 pin socket outlet

15/16 amps, 6 pin socket outlet

Supplying and fixing of folowingsize/ modules, GI box along with modular base & coverplate for modular switches in recess etc as required 1 or 2 module(78mm x 78mm x 45mm)

supplying and fixing Batte / Angle holder including connection etc as required

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 cvolts on surface / recess, complete with tinned copper bus bar, neutral bus bar din bar, inter connections, powder painted including earthing etc. as requred ( but without MCB/TCCB/Isolator) 4 Way single door

Supplying and fixing 6 amps to 32 amps rating 240 volts, 10 KA, "B" curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection, esting and commissioning etc as required 6/32 amps,single pole "B" series

Supplying and fixing following rating four pole 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps

providing and fixing G.I tape 20mm x 3mm thick on parapet or surface of wall for lighting conductor complete as required ( for horizontal run)

Supplying and fitting and fixing 9/10 watt LED Bulb

S.I.T.C of floowing rating Surface mounted LED tube light fitting suitable for 230V 50 Hz single phase supply etc. complete as required 20/22 W LED Tube light

Supplying and fitting and fixing 60 Watt LED Street light

Supplying fitting moduler type electronic fan regulator

Supply and fixing 1200mm BLDC 5 star rating 32W Ceiling Fan

add S/B & PHOTOGRAPHY

Add . 18 % GST

add 1 % labour cess

Please Enable Macros to View BoQ information