Retrofitting and Improvement of LWSS Dharmana in Tehsil Ramshehar Distt. Solan HP Sub Head Construction of Pump House and sump well 20000 liters capacity in village Banni Under JJM

Amount

Excavation in foundation & trenches etc. in in earth work lift up to 1.5 meter stacking the excavated soil not more than 3 meters clear from the edge of excavaton and then returning the stacked soil in 15cm layers when required into plinths, side of foundation etc. Consolidating each deposited layers by remming and watering and then disposing of all surplus excavated earth as direction within a lead of 20 mtr in pick work.

Providing and lying cement concrete 1:6:12 (1Cement: 6Sand: 12 approved quarry stone agg.40mm nominal size)& curing complete excluding cost of form work in Foundation and Plinth, i/c entire carriage of materials up to all leads and lifts

2nd class Brick work using common burnt clay building bricks in foundation and plinth in cement mortar 1:6 (1 cement :6 sand) complete in all respect i/c entire carriage of materials up to all leads and lifts

Ist class Brick work using common burnt clay building bricks in super structure in heights and depth in cement mortar 1:6 (1 cement :6 sand) complete in all respect i/c entire carriage of materials up to all leads and lifts

providing and laying Cement concrete work 1:2:4 (1 cement :2 sand :4 water borne aggregate 40mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landing shelve and their supports balconies beams, girders bressumers and centilevers upto floor two level.

Providing laying of tor steel reinfrcement for RCC work i/c bending, binding and placing in positon complete up to floor two level.

15mm thick cement plaster in single coat with cement mortar1:6 (1 cement :6 sand)of rough side or brick masonary/ stone masonary /concrete / walls for interior plastering upto floor two level i/c arrises, internal, rounded angles, chambers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar1:6 (1 cement :6 sand).

P/ F pressed steel door frames manufactured from commercial MS sheets of 1.25mm thickness including hinges, jump lock jamp. Bead and if required angle threshold of MS angle 50 x 25 mm or base tie of 1.25mm pressed MS welded or rigidly fixed together by mechanical means, adjustable lugs with split and tails to each jamp i/c steel butt hinges 2.5mm thick with guards, lock strike plate and shock as specified and applying a coat of steel primer after pretreatment or surface as directed by Engineer-in-charge.with in all leads and lifts.

Profile. 'A'

Profile. 'B'

providing and fixing 1 mm thick MS sheet door with frame of 40x40x6 mm angle iron 3.15 mm MS gusset plate at the junctions and corners including all necessary fittings, complete including applying a priming coat of red lead paint using flat 30x6 mm for diagonal braces and control cross/ pieces.

Filling in plinth with sand under floors including watenng ramming consolidating and dressing complete.

providing and laying Cement concrete flooring 1:2:4 (1 cement :2 sand :4 water borne aggregate 20mm nominal size) laid in one layer finished with a floating of neat cement 40 mm thick.

P/F on wall face PVC rain water pipe i/c fitting and complete in all respect..

White washing with lime on undecorated wall surface (two coat) to give an even shade i/c throughly brushing the surface to remove all dirt, dust, mortar dirt and other foregn matter.

providing plinth protection 50 mm thick in cement concrete 1:3:6 (1 cement :3 sand :6 water borne aggregate 20mm nominal size) including finishing the surface of concrete smooth.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with ready mixed paint brushing to give an even shade including cleaning the surface of dirt ,dust and other foreign matter with ready mixed paint other than white complete in all respect as per the direction of the Engineer - in - Charge.

Providing and fixing aluminium tower bolts (Berral type)anodized transparent or dyed to required shade and colour with screws etc complete(250x16).

Providing and fixing MS fan clamp type-I of 16 mm dia MS bar bend to shape with hooked ends in RCC during laying including printing the expossed portion of loop, all as per standard design complete.

P/F MS grills of required pattern in wooden frames/pressed steel frame with M.S. flat square/round bars 12mm Dia with round headed bolts and nuts or by screws Plain grill.

P/F of PVC Water Storage Tank of ISI : 12701 marked, GI inlet and out let connection 15 mm nomminal bore ball valves and mosquito PVC cover with locking arrangement including hosting up to all heights above ground level of 500 Litrs net capacity tank complete in all respect including entire carriage of materials in all leads and lifts as per the direction of the Engineer in -charge.

Providing and fixing vitreous china wash down water closet (Indian type W.C.pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (1cement:1sand) (seat and cover to be measured and paid for separately Vitreous china pattern--2(Anglo Indian) Universal closet In white colour

Providing and fixing PTMT Coloured / white high density polythelene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float,with push button,couplings for connections with inlet, outlet and ovrflow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow) pipe to be measured and paid for separately .

P/F high pressure PVC spigot and socket, wast and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. 110 mm dia

Providing and fixing PVC P or S trape for water closet (squatting pan) ISI marked i/c jointing the pan and PVC pipe with approved adhesive etc. complete 110mm dia

Providing and fixing brass bib tap(superior or heavy15mm dia long nose type)

P/F to wall ceilling and floor GMS pipe of (LG) fittings and clamps i/c making good the wall ceilling and floor. 15 mm dia

P/L White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1 :3 ( 1 cement : 3 sand ) finished with flush pointing in white cement.

Prov.and lying cement concrete 1:3:6 (1Cement: 3Sand: 6 approved quarry stone agg.40mm nominal size)& curing complete excluding cost of form work in Foundation and Plinth, i/c entire carriage of materials up to all leads and lifts

providing and laying Cement concrete work 1:1.5:3 (1 cement :1.5 sand :3 water borne aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in.

Foundation, footing, bases of columns and the like & mass concrete.

Vertical surfaces such as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like.

Providing from work with steel plates 3.15 mm thic welded with angle iron in frame 30x30x5 mm so as to give a fair finish i/c centring, shuttering, strutting and proping etc with wooden battens and ballies. Height of proping and centring below suporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu -reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landing and the like floor etc. up to 200 mm in thickness i/c carriage of material within all leads and lifts complete in all respect.

Vertical surfaces such as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like.

Flat surfaces such as soffits of suspended floor, roofs,landing & the like.

providing and laying Cement concrete work 1:1.5:3 (1 cement :1.5 sand :3 water borne aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in.

Suspended floor, roofs. Landing & shelves & their support balconies, beams, girders, bressumers & cantilever upto floor lever.Foundation, footing, bases of columns and the like & mass concrete.

Steel work welded in built up section, Trusses and framed work i/c cutting hoisting fixing in position and applying a priming coat of red lead paint in grating framed guard bars,ladders,railing,bracket and similar work. Complete in all respect.

Laying,jointing and testing of GMS Pipe (Light Grade) of following dia (earth work to be measured and paid for seprately).

150mm dia

80mm dia

Providing and fixing CI sluice valves(with hand wheels) as per IS : 780 class up to 300 mm dia (including brass spindle and as per IS:2906 class II for diameter more than 300 m complete with nuts, bolts rubber insertion etc) the tail pieces if required shall be measured and paid separately of following dia Kirloskar/ Leader make PN-1.6 complete in all respect.

150 mm dia

80 mm dia

Providing & fixing cast iron cover for frame of internal size 500 mm dia. With fram(medium duty) with in all leads & lifts.(weight of cover & frame not less than 116Kg) complete in all respect as per entire satisfaction of engineer in charge.

SURAT RAM D CLASS GOVT CONTRACTOR (BID ID -540985)

SHYAM LAL (BID ID -541305)