ADDN/ALTN OF WINDOWS OF SH-23 ,23A, DRAINAGE SYSTEM BEHIND NS-34, SH-47,SH-34 AND FLOORING OF SH-10 AND SPL REPAIR TO NS-101 AT MO(MB) GHATKOPAR

Amount

Excavation in trenches n exc 1.5m wide and n.exc 1.5m depth for man holes and sewarlines etc n exc 10 sqm on plan and nexc 1.5m in depth and getting out for hard/dense soil complete all as specifed and directed.

Demolition and breaking up 150mm drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar including bed concrete and removal of debris including sludge if any and side MD land complete.

M&L for reinforced concrete pipes class NP-2 ,150 mm dia laid and jointed complete with collars and all as specifed and directed.

M&L concrete bed to 150 mm dia pipes of cement mortar 1;3;6 type C-2 including packing under and haunching against the side of pipes after they are laid and tested complete all as specifed and directed.

M&L for cement concrete type D-2 1:4:8 using 40 mm graded stone aggregate in filling foundation , sub base of floor and mass concrete complete all as specifed and directed

M&L for brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specifed and directed

M&L for reinforced concrete pipes class NP-2 ,300 mm dia laid and jointed complete with collars and all as specifed and directed.

M&L concrete bed to 300 mm dia pipes of cement mortar 1;3;6 type C-2 including packing under and haunching against the side of pipes after they are laid and tested complete all as specifed and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm in hard / dense soil complete all as specifed and directed.

Removing Excavated soils exceeding 1.5KM but not exceeding 5 KM and depositing where directed.

S&F Cast iron work grade FG 150, unmachined in bracket, over head tank covers with brackets ,gully traps, grating, railing,frames,manhole covers,fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters exc 5kg each and similar articles all as specified and directed.

Material and labour rendering 15mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces finishes the surfaces even and smooth without extra cement coat including using water proofing compound 2% by weight of cement etc complete all as specified & directed. (Note :-Supply only water proofing compound will be measured and paid separately)

Supply only integral water proofing compound.

Cutting to existing manhole dia of pipe in 300 mm for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required complete all as spd and directed.

M&L for providing plain cement concrete 1:3:6 type B-1using 20mm graded stone aggregate as in coping including framed work for man holes etc including weathering ,slightly rounded or chamfered angle and throating as directed including necessary form work complete all as specifed and directed

M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar(Type 1:3:6 with 20 mm graded aggregate), complete all as specified and directed

M&L for rendering 15 mm thick in CM 1:6 on brick walls, pcc blocks etc and finishing the surface even and smooth complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, miterd ends etc all as specified

M&L for cement concrete type B-1, 1:2:4 ( 20mm graded aggregate ) as in surface channels and drains etc complete all as specified

M&L for providing plain cement concrete 1:2:4 type B-1using 20mm graded stone aggregate as in kerb stone coping including necessary form work complete all as specifed and directed

Taking down chowkats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm with shutters (without taking off shutters from the frames) complete all as specified and directed

Taking down chowkats or frames with shutters not exc 1.5 Sqm with shutters (without taking off shutters from the frames) complete all as specified and directed

M&L for 20 to 25mm machine cut pre polished kota stone slab as in riser of steps, skirting, window cills,dado and pillar laid over cement mortar backing coat jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and including over 10 mm thick Rendering in CM1:4 complete all as specified and as directed.

S&F aluminium section in doors / windows /ventilators sliding or openable or any type , powder coated in colour (Thickness of powder coating not less than 50 micron)(medium weight of series 'B') or as section directed by Engineer-in-Charge, cut to size, jointed together with cadmium plated steel screws including necessary pvc or rubber breading, track pvc or gasket for aluminium sections for fixing glass / bakelite sheet and all necessary fittings complete, screws, lock,plugs for fixing screws, etc all as specified and directed (Make : JINDAL/HINDALCO) Notes :- (a)Weight of aluminium sections shall only be measured. (b) The rate quoted shall be deemed to inclusive of necessary rubber breading, track pvc or gasket for aluminium sections for fixing glass / bakelite sheet

S&F aluminum anodised grill DG- 202 ( 10 mm x 7.5mm ) of Deco grill or equivalent fixed with 'F' section size not less than 20.60 x 15.20 x 1.5mm thick of approved make all as specified and directed. Note : (i) Make shall be of M/s Decogrille of M/s Associated Groups or equivalent as approved by the GE. (ii) Minimum thickness of anodizing shall be 15 microns.

S&F only 4mm thick figured glass/pin headed type ordinary quality fixed in aluminium ventilator n exc 0.50 Sqm each pane all as specified & as directed by EIC.

Supply only stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm , fixed in aluminium windows complete all as specified and directed.

Taking down cement plaster or lime plaster of any description from stone or brick wall etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish out side of MD land complete all as specified and directed.

M&L for rendering 12 mm thick in CM 1:6 on brick walls, RCC pillars, beams, purlins etc and finishing the surface even and smooth complete all as specified and directed.

M&L for filling cracks with polymer based chemical (Dr fixit cracks shrink free or equivalent) for cracks not exc 10 mm in width as per manufacturer instruction on wall surfaces on concrete or masonary including scaffolding etc complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying three coats of white wash on wall .etc complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying three coats of white wash complete all as specified and directed

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided and disposing off the rubbish outside MD land complete all as specified and directed.

M& L for Mild steel TMT bars 10 mm dia., and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

RCC 1:1.5:3 (20 mm graded aggregate) as in chajjas complete all as specified and directed.

Form work to soffits of suspended slab anding etc for fair finished of surfaces complete all as specified and directed.

Form work to edges of concrete as in windows cills, lintel etc for fair finished of surfaces complete all as specified and directed.

M&L for PCC 1:2:4 Type B-1( 20mm graded aggregate) as in coving of chajjas etc complete all as specified and directed.

M&L for preparation of new plastered surfaces on walls, chajjas applying two coats of 100% anti fungal weather resistant acrylic emulsion paint over a coat of acrylic primer in approved shade and as per manufacturer's instructions including necessary scaffolding complete all as specified and as directed.

M&L for 100 mm thick Provding PCC 1:2:4 Type B-2( 40mm graded aggregate) as flooring complete all as specified and directed.

M&L for PCC 1:3:6 Type B-2( 40mm graded aggregate) as in sub base of floor etc complete all as specified and directed.

M & L for 20mm thick Wearproof topping as specified (incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth (except metallic hardner) complete all as specified and directed

Supply only metallic floor hardener

Forming 12 mm thick expansion joint filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound grade A for 150mm thick concrete slab. etc complete all as spd and directed.

Forming construction joint 30mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc out side MD land complete all as specified and directed.

Demolition of brick work or stone boulder masonry,built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles and removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M/L for Non-skid ceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles n exc 0.18 sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM 1:6 laying floor finished complete all as specified and directed.

M&L for Non-skid ceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.06 sqm n exc 0.11 sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 laying floor finished complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300x200mmx7mm thick in vertical surfaces such as skirting/dado and risers to steps and including over 10mm thick rendering in CM 1:3 on fair faces of brick/concrete surfaces as in backing coat for tiles. etc, all as specified and directed.

M&L for vertified ceramic tiles 10mm (light shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 laying floor finishesed complete all as specified and directed.

M&L for brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specifed and directed

M & L for rendering 10 mm thick in CM 1:6 on brick walls or concrete surfaces and finishing the surfaces even and smooth complete all as specified and directed.

M & L for rendering 5 mm thick in CM 1:3 on concrete surfaces as in ceiling and finishing the surfaces even and smooth complete all as specified and directed.

Material and labour for cracks with polymer based chemical Dr fixit cracks shrink free or equivalant for cracks not exc 10mm in width as per manufacturer instruction on wall surfaces on concrete or masonry incl scaffolding etc complete all as spd.

M&L preparation of new plasterd surfaces of wall and applying two coats of Dr fixit rain coat over one coat of Dr fixit primer all as spd and directed by Engr-in-Charge

M&L for complete removal of existing treatment on walls including washing down, rubbing down and applying two coats of Dr fixit rain coat over one coat of Dr fixit primer all as spd and directed by Engr-in-Charge

M & L for preparation of new plastered surfaces of walls and applying Two coat of oil bound distemper including application of wall care putty (3mm thick) for smooth finish.etc with roller over one coat of alkali resistant primer including chalk whiting complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and thereafter applying with roller Two coat of oil bound distemper including application of wall care putty (3mm thick) for smooth finish.etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed

M&L for preparation of old decorated surfaces of ceiling brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and thereafter applying Two coat of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and thereafter applying Two coat of white wash complete all as specified and directed.

S&F Solid PVC door frame (Chowkhat) of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube etc complete all as specified and directed.

S&F for Factory made solid PVC Moulded door shutter, 28 to 30 mm thick, with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing with wood free EPS complete all as specified and as directed.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed tinned tacks or aluminium wire staples,and fixing of teak wooden beeding complete all as specified and as directed by the Engineer in charge.

S&F bands, steps, supports or stays for rain water, hooks (stay) heavy for large gates, hook and pintle hinges clamps, hold fasts wall ties, hooks for hanging james and similar small articles Fe-410-0 or Fe-310-0 complete all as specifed and directed.

S&F for 20mm dia curtain rods anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and directed

S&F 100 mm stainless steel butt hinges,complete all as specified and directed

S&F 150mm length aluminium anodised barrel tower bolt of extruded section complete all as specified and directed

S&F 150 mm length extruded aluminium alloy handles,fabricated type, anodised complete all as specified and directed

S&F alluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alluminium alloy and fixed of length of bolt 300 mm complete all as specified and directed.

Dismantling cast iron of any description etc complete all as specified and directed

S&F 75mm bore PVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc complete all as specifed and directed.

S&F 110mm bore PVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc complete all as specifed and directed.

S&F 75mm bore PVC (SWR) bends any radius dimnishing pieces or tapers with access doors etc, complete all as specified and as directed.

S&F 110mm bore PVC (SWR) bends any radius dimnishing pieces or tapers with access doors etc, complete all as specified and as directed.

S&F CI floor trap 75mm dia outlet, with CP grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4) & including removing old trap complete all as specified and as directed.

S&F CI floor trap 100mm dia outlet, with CP grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4) & including removing old trap complete all as specified and as directed.

S&F in repairs vitreous china squatting pan, white, orissa pattern pan of size 580 mm x 440 mm of standard quality with integral foot rests,and including 'P' trap or 'S' Trap complete including connection to trap and to flushing pipe, anti syphonic pipe etc., complete all as specifiedand directed.

S F in repair wash down closet pedestal pattern white and including plastic water closet seat cover as per required colour with flat bottom and cover and mild steel chromium plated or aluminium hanging device etc all as spd.

S F in repair brass Health faucet with 1.2 mtr tube and hook complete all as spd and directed.

S&F in repairs counter sunk wash hand basin, vitreous china white of size 550x 400mm excluding taps, waste chain and plug and porcelain stopper but including brackets,32mm waste fitting and waste pipe of 32 mm bore, brass, chromium plated for glazed ware wash basin and 15mm dia pillar taps chromium plated fancy type etc complete all as specified and directed. make:jaquar, Marc, Kohler

Supply and fix in repair 10 ltr, PVC, valveless, syphonic action type, flushing cistern, low level/ high level including inlet, ball valve, float and handle including brackets with and including PVC flush pipe 32 mm bore, connecting to WC etc, complete all as specified and directed.

S&F in repairs CP angle cock 15mm bore fancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.( make Jaguar, Kohler , Marc)

S&F in repairs CP long nose bib tap 15mm bore fancy type with crutch or butterfly handle, screwed for iron pipe or for unions and fixed complete all as specified and directed.(Make Jaguar, Kohler, Marc)

S&Fin repair 15mm size PVC connection with PTMT nuts 450mm length.complete all as specified and directed.

S&F in repair CP Tubular towel rail with hook 20 mm dia 600mm long between flanges of fixed with and including chromium plated brass screws and wooden/plastic screws. complete all as specified and directed.make: Jaquar, Kohler, Marc.

S&F Soap dish, Stainless steel fancy type approx size 160x160x90mm complete all as specified and directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 25mm complete all as specified and directed.

S&F 15mm bore U-PVC pipes of pressure rating 10kg/cm 2 fixed complete to walls, ceiling or in floor etc. with all fittings complete all as specified and directed.

S&F 20mm bore U-PVC pipes of pressure rating 10kg/cm 2 fixed complete to walls, ceiling or in floor etc. with all fittings complete all as specified and directed.

S&F for Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

M & L for Vitreous China urinals,half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to pugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for ischarge pipe. (Exclusive offixing supply pipe to flushingcistern, trap and waste pipe)

M&L for 18-20mm thick granite(of any type) work table rubbed and polished as in steps, jambs, pillars, windows-cill, cooking platform , jambs and the like in cement mortar (1:4) including pointing in white / coloured cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting , moulding etc over and including 10mm thick rendering / screed in CM 1:4 on fair faces of brick/concrete surfaces complete all as specified and directed.

M&L PCC 1:4:8 C-2 (using 40mm graded crushed stone aggregate) as in sub base ( 75mm thick ) finished even and fair all as specified.

M&L for chequered cement concrete tiles 25cmX25cmX22mm thick,set jointed in neat cement slurry in floors with grey cement and pigments and including over 20mm thick screed bed in CM 1:4 etc and as approved by EIC

S&F for Pre- Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping ,drilling of screws/suitable length GI 'J' or 'L' hooks in roof complete all as specified and directed.

S&F for Pre- Painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/rigdes, fixed with self tapping ,drilling of screws/suitable length GI 'J' or 'L' hooks in roof, including necessary scaffolding etc complete all as specified and directed.

S&F for roof trusses (framed) trussed, Purlins, crane gantries, rails and fastenings and heavy brackets framing(Beam, Angle, Channel or flat section,plain plates) including distance pieces, cleats ,welding and braceing etc,Fe-410W(Gde-E-250)quality -B, including necessary scaffolding etc complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide etc complete all as specified and directed.

Dismantling of roof terracing cement / brick concrete (un-reinforced) and existing water proofing treatment of any thickness in any position and of any portion from top of roof of building, cleaning surface of roof with wire brush / mechanical brush and with water thoroughly to remove all dust / dirt and loose particles to expose base concrete roof slab and removal of rubbish / demolished material out of MD land complete all as specified.

M&L for PCC 1:2:4 Type B0 using 12.5 mm graded aggregate with 2% by weight of cement or as per manufacturer's instructions water proofing as in levelling course, haunching, coping and similar works over RCC roof surface and RCC over head tank top surface including rounded or chamferred on edges and formwork etc all as specified and directed.

M&L for preparation of surfaces and applying oil bound bitumin primer over the roof surfaces @ 0.40 lit per sqm confirming to IS code , manufactrured by the same agency as that of APP with density of 0.87-0.89 KG/ lit at 25 degree C prepared dry roof surfaces for filling the voids and to receive APP water proofing membrane of weight not less than 3.6 Kg per sqm on roof slab and on parapet wall and mumty portion reinforced with non wooven polyester matt all as per manufacturer's instructions and zonal specification and as directed by Engr-in-Charge.

M&L for solar reflective bituminous aluminium paint @ 0.10 Kg per Sqm over membrane surfaces as in roof treatment complete all as specified

Taking down carefully copper/aluminum point wiring of any type such as Concealed/surface/batten/casing and capping (light fan, socket or power) complete including fitting such as switches, ceiling roses, pendants, lamp/bracket holders, sketch/bulk head fittings, regulators, sockets, board outlets etc and making good the disturbed surfaces of walls, floor, ceiling etc for rewiring and repairs etc.

M&L for point wiring for light/fan controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC concealed conduit having thickness not less than 2 mm with all fittings including modular steel sunk box having thickness not less than 2 mm including 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour and all as specified .Note: colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)(Make of copper wire:Le Grand/Havells/Polycab and PVC conduit Make: Precision,Plaza)

All as item No 109 here-in-before but for 5 pin 5 amps socket outlet on the same board with other switch all as specified.

All as item No 109 here-in-before but for 5 pin 5 amps socket outlet indenpendent board of light point all as specified.

M&L for point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLSH with and in and including PVC concealed conduit having thickness not less than 2 mm with all fittings including modular sunk box having thickness not less than 2 mm including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLSH as earth continuity conductor connected to common earth dolly.and including cutting chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching existing colour and all as specified . Note: colour coding is to be maintained .(Ph-Red, N-Black, Half-Yellow, Earth- Green)(Make of copper wire:Legrand/standard/Havells and PVC conduit Make: Precision,Plaza)

M&L for point wiring with 4 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and in and including PVC concealed conduit having thickness not less than 2 mm with all fittings including modular sunk box having thickness not less than 2 mm including 4 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly.and including cutting chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching existing colour and all as specified . Note: colour coding is to be maintained .(Ph-Red, N-Black, Half-Yellow, Earth- Green)(Make of copper wire:Legrand/standard/Havells and PVC conduit Make: Precision,Plaza)

M&L for submain wiring in and including PVC conduit having thickness 2 mm, 25 mm dia with two run of PVC insulated, sheathed multistranded copper conductor of 10 sqmm(FRLS) and one run of PVC insulated, sheathed multistranded copper conductor 10 sqmm (green in color) for earth continuity conductor and connected to common earth dolly with thimble etc, cutting chiseling for concealed piping and making good the disturbed surface area white wash/colour wash to matching with existing colour complete all as specified and directed.. (Note: Two run of 10 sqmm plus one run 10 sqmm of earth wire will be measured as 1RM) including dismantling of existing unserviceable submain wiring all as specified and directed.Make:Legrand/Havells/polycab Note: colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)

M&L for ceiling rose three terminals AC 240 volts 50Hz complete all as specified of make: Havells/Legrand/Cona

Supply and fixing modular ceiling fan regulator 120 watt 2 module AC 240 volt complete all as specified and directed. Make : Legrand/ Indoasian(Elvira)/ Havells

M&L for switch modular one way 6/5 amps 1 module complete all as specified.of make: legrand/ Havells/Elvira(Indo Asian)

M&L for switch modular one way 15/20 amps 1 module complete all as specified.of make: legrand/ Havells/Elvira(Indo Asian)

M&L for socket modular 6Amp 2/3 pin combined 2 module complete all as specified and directed. Make : Legrand/ Indoasian(Elvira)/ Havells

M&L for socket modular 16/20 Amp 2/3 pin combined 2 module complete all as specified and directed. Make : Legrand/ Indoasian(Elvira)/ Havells

Supply and fix in repairs sheet metal enclosure powder painted for MCCB DB TPN 4 way double door vertical type with 200 Amp bus bar din rail neutral link with suitable for MCCB as incomer complete all as specified and directed. Make: Legrand/Schneider/Siemens

Supply and fix in repairs MCB SP 240 Volts 5 to 32 Amps breaking capacity 10 KA rating complete all as specified and directed.Legrand/Schneider/Siemens

Supply and fix in repairs sheet metal enclosure powder painted for MCB DB SPN 8 way double door with din rail and 200 Amp bus bar complete all as specified and directed. Make: Legrand/Schneider/Siemens

Supply and fix in repairs sheet metal enclosure powder painted for MCB DB SPN 4 way double door with din rail and 200 Amp bus bar complete all as specified and directed. Make: Legrand/Schneider/Siemens

Supply and fixing modular metal flush box 3 module complete all as specified and directed. Make : Legrand/ Indoasian(Elvira)/ Havells

Supply and fixing modular metal flush box 4 module complete all as specified and directed. Make : Legrand/ Indoasian(Elvira)/ Havells

Supply and fixing modular metal flush box 6 module complete all as specified and directed. Make : Legrand/ Indoasian(Elvira)/ Havells

Supply and fixing modular metal flush box 8 module complete all as specified and directed. Make : Legrand/ Indoasian(Elvira)/ Havells

Supply and fixing modular white cover plate with frame 3 module complete all as specified and directed. Make : Legrand/ Indoasian(Elvira)/ Havells

Supply and fixing modular white cover plate with frame 4 module complete all as specified and directed. Make : Legrand/ Indoasian(Elvira)/ Havells

Supply and fixing modular white cover plate with frame 6 module complete all as specified and directed. Make : Legrand/ Indoasian(Elvira)/ Havells

Supply and fixing modular white cover plate with frame 8 module complete all as specified and directed. Make : Legrand/ Indoasian(Elvira)/ Havells

Material and Labour for tube light fitting LED 18 watt with decorative end caps made out of CRCA sheet powder coated complete with housing t with aluminium heat sink on back of leds ,power factor >0.9,having inbuilt surge protection device for overvoltage protection with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceiling rose/PVC connector to light fitting and shall be fitted on new plastic square/round block complete all as per specified and directed. Make: philips / Havells /CG, Tecnocomercially equivalent in Luccar etc Note:1.Contractor shall produce LM79 & LM80 test reports from OEM owned NABL accredited laboratory.Contractor shall also produce certificates for power factor and surge protection from the company at no extra cost.

Taking down existing ceiling fans and re-fixing the same ceiling fan and exhaust fan any sweep including provisioning of cable from celing rose toc/ fan and spry painting of ceiling fan/Exhaust fan with two coats of synthetic enemal paint complete all as specified and directed.

Supply and fixing modular motor starter 25 Amp 2 module for AC complete all as specified and directed.Make:Legrand model No: 673466/Schneider/Seimens

M & L for earthing complete with Copper earth plate electrode 60 cm x 60 cm x 6 cm thick buried directly in ground vertically at a depth not less than 2.25 m below normal ground level with top level of earth plate at depth not less than 1.5 m below normal ground level surrounded form all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connection by using Copper strip 32 mm x 6 mm by means of bolts, nuts, check nuts and washers of Stainless Steel upto test point and protected by GI pipe light grade 40 mm bore up to 7.5 Mtr connected to a main switch board or main control board and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, 80 mm thick pre-cast RCC 1:2:4, type B-1 cover reinforced with hard drawn steel wire fabric weighing not less than 4 Kg/Sqm in lieu of CI cover, PCC 1:3:6 type C2 pit / chamber including all necessary excavation and earth work, disposal of surplus soil to a distance not exceeding 50 m all as specified and as shown in Electrical Plate No3 of MES Schedule Part – I of 2009.

Supply and fix in repairs MCCB TP 415 Volt breaking capacity 16 KA 63 Amps rating complete all as specified and directed.Legrand/Schneider/Siemens

Supply and fix in repairs MCB SPN 240 Volts 5 amp to 32 amp brealing capacity 10 KA rating complete all as specified and directed.Make : Legrand/ Schneider/ Siemens

Supply and fix in repairs MCB SP 240 Volts 5 amp to 32 amp brealing capacity 10 KA rating complete all as specified and directed. Make : Legrand/ Schneider/ Siemens

M/s Qureshi Construction Co