Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.3 LAccepted-AOC | ₹34.3 L Quoted ₹34.8 L | L1 | Accepted-AOC L1 Bidder |
| 2 | L2₹35.5 L+₹67,743.67 (1.95%)Rejected-Finance W D BUILDING JP ROAD BHARALUMUKH GUWAHATI 781009 ASSAM | KAMRUP METRO | ASSAM | 781009 | ₹35.5 L+₹67,743.67 (1.95%) | L2 | Rejected-Finance Other than L1 bidder |
| 3 | L3₹42.0 L+₹7.3 L (20.9%)Rejected-Finance | ₹42.0 L+₹7.3 L (20.9%) | L3 | Rejected-Finance Other than L1 bidder |
| 4 | L4₹43.0 L+₹8.2 L (23.6%)Rejected-Finance MES COLONY KUMBHIGRAM AIRPORT CACHAR ASSAM 788109 | KUMBHIGRAM | CACHAR | ASSAM | 788109 | ₹43.0 L+₹8.2 L (23.6%) | L4 | Rejected-Finance Other than L1 bidder |
| 5 | L5₹47.9 L+₹13.1 L (37.7%)Rejected-Finance HOUSE NO 29 A SIJUBARI NIZARA PATH PO PS HATTIGAON GUWAHATI 38 | KAMRUP METRO | ASSAM | 781038 | ₹47.9 L+₹13.1 L (37.7%) | L5 | Rejected-Finance Other than L1 bidder |
| Sl No | Description | Qty | Unit | PK ENGINEERING L2 | AAY JAY ENTERPRISE L3 | M/S SEWAK SINGH L5 | Goswami Traders L4 | VISHWAKARMA ELECTRICAL L1 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Material and lanour for servicing of 05 Ton capacity flame proof EOT crane of any make installed at different building/location at site, making the cranes in serviceable condition complete all as specified and directed with and including opeartions for maintenance specified as under:-
(A) LONG TRAVERSE MOTION-
(a) Checking gear box oil level, checking and rectifiaction of leakage if any and filling with new oil up to required level.
(b) Checking functioning of all brakes of any capacity and making adjustment for proper working.
(c) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement.
(d) Checking of grease in geared coupling and tighting of nut/bolts etc.
(e) Checking of motion cut off at extreme ends with limit switches.
(f) Checking drive shaft and coupling including tighting of nut and bolts.
(g) Checking oil in FLP thrustors checking any leakage any filling with new oil.
(h) Checking terminal connection of all LT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. (B) CROSS TRAVERSE MOTION
(a) Checking gear box oil level, checking and rectifiaction of leakage if any and filling with new oil up to required level.
(b) Checking functioning of all brakes of any capacity and making adjustment for proper working.
(c) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement.
(d) Checking of grease in geared coupling and tighting of nut/bolts etc.
(e) Checking of motion cut off at extreme ends with limit switches.
(f) Checking drive shaft and coupling including tighting of nut and bolts.
(g) Checking oil in FLP thrustors checking any leakage any filling with new oil.
(h) Checking terminal connection of all CT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. | 7 | Each Job | 17,000 ₹1,19,000 Lowest | 25,000 ₹1,75,000 | 35,000 ₹2,45,000 | 29,230 ₹2,04,610 | 22,000 ₹1,54,000 |
| 2.00(C) HOIST MOTION (a) Checking gear box oil level, checking and rectifiaction of leakage if any and filling with new oil up to required level. (b) Checking functioning of all brakes of any capacity and making adjustment for proper working. (c) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement. (d) Checking of grease in geared coupling and tighting of nut/bolts etc. (e) Checking of motion cut off at extreme ends with limit switches. (f) Checking drive shaft and coupling including tighting of nut and bolts. (g) Checking oil in FLP thrustors checking any leakage any filling with new oil. (h) Checking terminal connection of all hT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. (D) ELECTRICALS (a) Checking and tightening all electric connection (b) Checking the contactors/ relays etc for overheating or flashinng. © Clening off all connection and control cables. (d) Properly bunching the loose control cable. (e) Checking functioning of cable carriers. (f) Checking the connection and serviceability of VVVF drives for smooth working. (E) GROUND MOTION CONTROL PANEL Opening the push button control unit, checking all connection, replacing flashed/ over heated connections, general cleaning and checking all the functions,of the LT/CT/ Hoist motion push buttons and lights/ VVVF switch including reassembling the unit complete Note :Testing and necessary Inspection be carried out by competent person from office of Cheif inspector of Crane as per policy for use of crane and test report be submitted in dupicate by contractor to Engr in charge and cost thereof deemed to be included in the quoted rate . | ||||||||
| 3.00 | All as per item No. 1 here-in-before but 3 ton capacioty EOT crane complete all as specified and directed.
NOTE :-
1. Gear box oil shall be measured and paid separately. | 2 | Each job | 10,000 ₹20,000 Lowest | 22,000 ₹44,000 | 40,000 ₹80,000 | 25,662 ₹51,324 | 16,500 ₹33,000 |
| 4.00 | Material and labour for comprehensive maint/minor repair by service Engineer of OEM or his authorised rep having minor adjustment of all landing gate & car gate, controller dressing, car cleaning, sensor reapair/replacement and controller cleaning, replacement of gear oil, adjustment of guide shoe holder, OSG pit clearance adjustment of electrically operated lift of capacity 1000 kgs, Speed 0.70m/sec, 2 floor/2 stop, collective down control type, 3 phase, V3F drive type, checking and repairing sensor system for smooth operation, manual/auto door ACO installed at NBC storage shed of 222 ABOD complete all as specified and directed. Make of LIFT: ECE Pvt Ltd Note: Testing and necessary Inspection be carried out by competent person from Office of the Chief Inspector of Lift & Excalator of State as per Rule 4 & 6 of The Assam Lifts and Excalators Rule 2016 or as per policy for use of lift and Test report be submitted in duplicate by contractor complete all as specified and as directed. | 1 | Each job | 19,200 ₹19,200 Lowest | 50,000 ₹50,000 | 1,10,000 ₹1,10,000 | 97,817 ₹97,817 | 1,35,000 ₹1,35,000 |
| 5.00 | Taking down old defective from Main hoisting 3 lengths of wire ropes of 10mm dia and Supply and fix new steel wire ropes of 10mm dia 3 lengths of same length alongwith all fittings assy such bulldog gripe, nuts & bolts of suitable size include testing and commissioning on load complete all as specified and directed. Make: USHA/Martin | 1 | Job | 300 ₹300 Lowest | 2,450 ₹2,450 | 15,000 ₹15,000 | 4,150 ₹4,150 | 2,000 ₹2,000 |
| 6.00 | Supply and fix door spares for all landing and car complete all as specified and directed lot -01 | 1 | Job | 6,000 ₹6,000 | 22,500 ₹22,500 | 4,500 ₹4,500 | 9,130 ₹9,130 | 500 ₹500 Lowest |
| 7.00 | Supply and fix ARD system for above mentioned lift include UPS & Btys as per OEM recommendation suitable for existing model lift complete all as specified and directed including testing and commissioning complete all as specified and directed. | 1 | Each | 51,000 ₹51,000 | 1,50,000 ₹1,50,000 | 35,000 ₹35,000 Lowest | 37,224 ₹37,224 | 35,000 ₹35,000 Lowest |
| 8.00 | Material and labour for toping up gear oil for electrically operated lift complete all as specified and directed | 4 | Ltr | 500 ₹2,000 | 450 ₹1,800 Lowest | 750 ₹3,000 | 564 ₹2,256 | 600 ₹2,400 |
| 9.00 | Supply and Fix contactor 20 Amps with 2 NO + 2NC including taking out old unserviceable complete all as specified and directed. | 2 | Each | 1,500 ₹3,000 Lowest | 3,500 ₹7,000 | 3,500 ₹7,000 | 3,436 ₹6,872 | 3,800 ₹7,600 |
| 10.00 | All as per item no. 9 here-in-before but of 25 amps complete all as specified and directed. | 3 | Each | 2,100 ₹6,300 Lowest | 3,800 ₹11,400 | 4,500 ₹13,500 | 4,945 ₹14,835 | 3,900 ₹11,700 |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
8 Jun 2026, 6:00 pmClosed
GE Narangi
GE Narangi C/o 99 APO
REPAIR/MAINTENANCE OF INTERNAL ELECTRIC WIRING, SUBMAIN, MCB, DBs, EOT CRANE, LIFT AND CONNECTED WORKS UNDER GE NARANGI
2026_MES_766234_1
8216/B/E8
Open Tender
Civil Works
Item Rate
180 days
Guwahati
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Narangi
₹1 L
Yes
14 Aug 2026
19 May 2026
10 Jun 2026
19 May 2026
8 Jun 2026
2 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Material and lanour for servicing of 05 Ton capacity flame proof EOT crane of any make installed at different building/location at site, making the cranes in serviceable condition complete all as specified and directed with and including opeartions for maintenance specified as under:-
(A) LONG TRAVERSE MOTION-
(a) Checking gear box oil level, checking and rectifiaction of leakage if any and filling with new oil up to required level.
(b) Checking functioning of all brakes of any capacity and making adjustment for proper working.
(c) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement.
(d) Checking of grease in geared coupling and tighting of nut/bolts etc.
(e) Checking of motion cut off at extreme ends with limit switches.
(f) Checking drive shaft and coupling including tighting of nut and bolts.
(g) Checking oil in FLP thrustors checking any leakage any filling with new oil.
(h) Checking terminal connection of all LT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. (B) CROSS TRAVERSE MOTION
(a) Checking gear box oil level, checking and rectifiaction of leakage if any and filling with new oil up to required level.
(b) Checking functioning of all brakes of any capacity and making adjustment for proper working.
(c) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement.
(d) Checking of grease in geared coupling and tighting of nut/bolts etc.
(e) Checking of motion cut off at extreme ends with limit switches.
(f) Checking drive shaft and coupling including tighting of nut and bolts.
(g) Checking oil in FLP thrustors checking any leakage any filling with new oil.
(h) Checking terminal connection of all CT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. | 7 | Each Job | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
8216Tender.pdf
Tender Documents • 0.69 MB
BOQ_858145.xls
BOQ • 2.41 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .