RC PUMPS

Amount

SUB HEAD-I (Wiring)

SITC of Heavy Duty Regenerative Self Priming Monoblock pumping set of 3 HP rating having common base with totally enclosed fan cooled motor suitable for operation on 440 Volts, Three phase, 50Hz A/C supply, capable of discharging about 11700-960 LPH against the head of 9 to 45 Mts and suitable for (40x40) mm size suction and discharge line connection including providing suitable arrangement for priming of pump, installation of the same on existing cement concrete foundation testing, commissioning etc. complete as required at site (Make: Crompton greaves DMB30 or SS Make)

SITC of centrifugal Monoblock pumping set of 1.5HP rating having common base with totally enclosed fan cooled motor with capacitor, start & run eliminating centrifugal switch suitable for operation on 230 Volts, Single phase, 50Hz A/C supply, capable of discharging about 175-50 LPM against the head of 15-27 Mts. and suitable for (40x32) mm size suction and discharge line connection including providing suitable arrangement for priming of pump, installation of the same on existing cement concrete foundation testing, commissioning etc. complete as required at site (Make: Crompton greaves MBG1.52(1PH)-27 or SS Make)

Providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, set etc including form work etc as required.

Supplying & fixing of Bronze metal, Non Return Valve (NRV) (Horizontal type) suitable for 40 mm dia pipe including testing etc. complete as required.

Supplying & fixing of Bronze metal, Non Return Valve (NRV) (Horizontal type) suitable for 32 mm dia pipe including testing etc. complete as required.

Supplying & fixing of Bronze metal, Full way Gate Valve suitable for 40mm dia GI pipe including testing etc. complete as required.

Supplying & fixing of Bronze metal, Full way Gate Valve suitable for 32mm dia GI pipe including testing etc. complete as required.

Supplying & fixing of Gun metal, Foot Valve (vertical type) suitable for 40mm dia GI pipe testing etc. complete as required.

Supplying & fixing of Gun metal, Foot Valve (vertical type) suitable for 32mm dia GI pipe testing etc. complete as required.

Providing and fixing of following size medium (B) class GI Pipe including supplying of fittings like elbow, tees, unions, sockets etc. and fixing the pipe with suitable clamps/supports, painting with two coats of synthetic enamel paint, making connection using required size fittings, cutting and threading of pipe and plumbing work etc. as required at site.

40mm dia

32mm dia

SITC of Prewired Direct on line Pump starter with sheet steel enclosure suitable for operation on three Phase, 415 Volt, AC supply including one No. 20 A, AC3 rating Contractor with Over Load Relay with release range of 4 A to 6.5 A, Single Phase Preventer, On OFF Switch, Combined Voltmeter & Ammeter , Indicating Lights, on and off push buttons complete with internal connection etc as required at site. (M/s L&T MU-G6 DOL or Similar superior approved make)

SITC of Prewired Direct on line starter with sheet steel enclosure suitable for operation on single Phase, 230 Volt, AC supply including with over Load Relay with release range of 6-10 A, on and off push buttons complete with internal connection etc. as required at site. (M/s L&T MU-2P OR Similar Superior approved make)

SITC of Following rating C Curve MCB i/c PF sheet steel enclousure and making interconnection etc as required.

Four Pole 20A

Two Pole 20A

Supplying & Laying of following sizes XLPE insulated PVC inner sheathed Aluminium conductor Armoured cable of 650/1100V grade conforming to IS: 7098(Part 1) 1988 amended upto date as required on wall / existing pipe / hume etc as required.

3c x 6 sqmm Aluminium Conductor Armoured Cable

3c x 10 sqmm Aluminium Conductor Armoured Cable

3.5c x 25 Sq.mm Aluminium Conductor Armoured Cable

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

2 X 6 sq. mm (19 mm)

3 X 10 sq. mm (22mm)

3.5 x 25 Sq.mm ( 28 mm)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Up to 35 sq. mm

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

S/F Angle iron Frame combination of following size of angle I/c cutting, welding & painting complete as per requirement at site.

40 mm x40 mmx3mm thick angle iron

25 mm x5 mm Thick Flat angle iron