Proposed construction of Library building in the premises of Karnataka State Law University Navanagar, Hubballi

Sub Estimate -1- Civil Works

Cutting of Trees, excluding removal of stumps and roots of trees, Girth from 300 mm to 600 mm (Ground Floor) ---- including cost and conveyance of all materials, curing, loading and unloading with all...

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disp...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and ...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barr...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barr...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barr...

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specification, including setting out, construction of shoring, strutting, cost of...

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Ground Floor) --...

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification (Granular material) (Ground Floor) ---- including cost and conv...

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification (Sandy material) (Ground Floor) ---- including cost and conveya...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, bas...

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size deri...

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggreg...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggreg...

Providing and laying in position Cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Providing and laying in position Cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Providing and laying in position Cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Providing and laying in position Cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Ready Mix Concrete M-25 grade (RMC) with cement & Cementious materials Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Co...

Ready Mix Concrete M-25 grade (RMC) with cement & Cementious materials Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Co...

Ready Mix Concrete M-25 grade (RMC) with cement & Cementious materials Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Co...

Ready Mix Concrete M-25 grade (RMC) with cement & Cementious materials Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Co...

Ready Mix Concrete M-25 grade (RMC) with cement & Cementious materials Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Co...

Ready Mix Concrete M-25 grade (RMC) with cement & Cementious materials Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Co...

Providing and laying in position cement concrete M-25 grade for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height....

Providing and laying in position cement concrete M-25 grade for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m h...

Providing and laying in position cement concrete M-25 grade for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m h...

Providing and laying in position cement concrete M-25 grade for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m h...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, l...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, l...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, l...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, l...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Isolated Footing for M-25 (8% of concrete), including cost of all materials, labour complete as per...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Isolated Footing for M-25 (8% of concrete), including cost of all materials, labour complete as per...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Plinth beams M-25 (50% of concrete), including cost of all materials, labour complete as per specif...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Plinth beams M-25 (50% of concrete), including cost of all materials, labour complete as per specif...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Earth retaining structures M-25 (10% of concrete), including cost of all materials, labour complete...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Earth retaining structures M-25 (10% of concrete), including cost of all materials, labour complete...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Columns upto plinth M-25 level Grade slab level (70% of concrete ), including cost of all material...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Columns upto plinth M-25 level Grade slab level (70% of concrete ), including cost of all material...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Column above plinth level M-25 grade (70% of concrete ), including cost of all materials, labour co...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Column above plinth level M-25 grade (70% of concrete ), including cost of all materials, labour co...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Column above plinth level M-25 grade (70% of concrete ), including cost of all materials, labour co...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Column above plinth level M-25 grade (70% of concrete ), including cost of all materials, labour co...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for lintels M-25 (60% of concrete ), including cost of all materials, labour complete as per specific...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for lintels M-25 (60% of concrete ), including cost of all materials, labour complete as per specific...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for lintels M-25 (60% of concrete ), including cost of all materials, labour complete as per specific...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for lintels M-25 (60% of concrete ), including cost of all materials, labour complete as per specific...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Slab beams M-25 (60% of concrete ), including cost of all materials, labour complete as per specif...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Slab beams M-25 (60% of concrete ), including cost of all materials, labour complete as per specif...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Slab beams M-25 (60% of concrete ), including cost of all materials, labour complete as per specif...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Slab beams M-25 (60% of concrete ), including cost of all materials, labour complete as per specif...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Slab RMC M-25 (50% of concrete), including cost of all materials, labour complete as per specifica...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Slab RMC M-25 (50% of concrete), including cost of all materials, labour complete as per specifica...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Slab RMC M-25 (50% of concrete), including cost of all materials, labour complete as per specifica...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Slab RMC M-25 (50% of concrete), including cost of all materials, labour complete as per specifica...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Staircase M-25 (50% of concrete), including cost of all materials, labour complete as per specifi...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Staircase M-25 (50% of concrete), including cost of all materials, labour complete as per specifi...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Staircase M-25 (50% of concrete), including cost of all materials, labour complete as per specifi...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Chejjas, Canopy & other Architectural projections of minor sections. RCC M-25 (45% of concrete), i...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Chejjas, Canopy & other Architectural projections of minor sections. RCC M-25 (45% of concrete), i...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Chejjas, Canopy & other Architectural projections of minor sections. RCC M-25 (45% of concrete), i...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and fixing suitable plaster mesh 150 mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped fo...

Providing and fixing suitable plaster mesh 150 mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped fo...

Providing and fixing suitable plaster mesh 150 mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped fo...

Providing and fixing suitable plaster mesh 150 mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped fo...

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in steppe...

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in steppe...

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in steppe...

Providing Teak wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su...

Providing and fixing in position fully panelled Teak wood shutters for doors with stiles and rails of 50mm. Thick with brass inlay with CNC cutting as per the design with malemamnie polish includ...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden...

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood, 50 x 20 mm (Ground Floor) ---- ...

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood, 50 x 20 mm (First Floor) ---- i...

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood, 50 x 20 mm (Second Floor) ---- ...

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood, 50 x 20 mm (Third Floor) ---- i...

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor sp...

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor sp...

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor sp...

Providing and fixing bright finished brass butt hinges with necessary screws etc complete: 125x85x5.5mm heavy type (Ground Floor) ---- including cost and conveyance of all materials, curing, loading a...

Providing and fixing bright finished brass butt hinges with necessary screws etc complete: 125x85x5.5mm heavy type (First Floor) ---- including cost and conveyance of all materials, curing, loading an...

Providing and fixing bright finished brass butt hinges with necessary screws etc complete: 125x85x5.5mm heavy type (Second Floor) ---- including cost and conveyance of all materials, curing, loading a...

Providing and fixing bright finished brass butt hinges with necessary screws etc complete: 125x85x5.5mm heavy type (Third Floor) ---- including cost and conveyance of all materials, curing, loading an...

Providing and fixing bright finished brass tower bolts ( barrel type) with necessary screws etc complete, 250x10mm (Ground Floor) ---- including cost and conveyance of all materials, curing, loading a...

Providing and fixing bright finished brass tower bolts ( barrel type) with necessary screws etc complete, 250x10mm (First Floor) ---- including cost and conveyance of all materials, curing, loading an...

Providing and fixing bright finished brass tower bolts ( barrel type) with necessary screws etc complete, 250x10mm (Second Floor) ---- including cost and conveyance of all materials, curing, loading a...

Providing and fixing bright finished brass tower bolts ( barrel type) with necessary screws etc complete, 250x10mm (Third Floor) ---- including cost and conveyance of all materials, curing, loading an...

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (Ground Floor) ---- includin...

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (First Floor) ---- including...

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (Second Floor) ---- includin...

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (Third Floor) ---- including...

Providing and fixing bright finished brass handles with screw etc 125mm with plate 175x32mm (Ground Floor) ---- including cost and conveyance of all materials, curing, loading and unloading with all l...

Providing and fixing bright brass handles with screw etc 125mm with plate 175x32mm (First Floor) ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and li...

Providing and fixing bright brass handles with screw etc 125mm with plate 175x32mm (Second Floor) ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and l...

Providing and fixing bright brass handles with screw etc 125mm with plate 175x32mm (Third Floor) ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and li...

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc complete. (Ground Floor) ---- including cost and conveyance of all materials, curing, loading and u...

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc complete. (First Floor) ---- including cost and conveyance of all materials, curing, loading and un...

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc complete. (Second Floor) ---- including cost and conveyance of all materials, curing, loading and u...

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc complete. (Third Floor) ---- including cost and conveyance of all materials, curing, loading and u...

Providing and fixing door latch with necessary screws etc complete. Bright finished brass latch (Ground Floor) ---- including cost and conveyance of all materials, curing, loading and unloading with ...

Providing and fixing door latch with necessary screws etc complete. Bright finished brass latch (First Floor) ---- including cost and conveyance of all materials, curing, loading and unloading with a...

Providing and fixing door latch with necessary screws etc complete. Bright finished brass latch (Second Floor) ---- including cost and conveyance of all materials, curing, loading and unloading with ...

Providing and fixing door latch with necessary screws etc complete. Bright finished brass latch (Third Floor) ---- including cost and conveyance of all materials, curing, loading and unloading with a...

Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mec...

Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mec...

Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mec...

Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mec...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

Structural Glazing: Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved drawings of Chief Architect, GoK.The al...

Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface 2 ...

Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such...

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and ...

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and ...

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and ...

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and ...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of app...

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of app...

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of app...

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of app...

Providing and fixing Toilet cubicals with the following specifications, Thickness of Compact Laminate : 18 mm, Color of HPL Boards: As approved by Engineer-in-charge, Size of Cubicle : As per drawing,...

Providing and fixing Toilet cubicals with the following specifications, Thickness of Compact Laminate : 18 mm, Color of HPL Boards: As approved by Engineer-in-charge, Size of Cubicle : As per drawing,...

URINAL PARTITION: Supply and installation of urinal partition using Green lam model A.Thickness of compact laminate : 12mm, Height : 1.2mt 450 mm at top / 300 mm at bottom., S.S L-clamp accessories.,...

URINAL PARTITION: Supply and installation of urinal partition using Green lam model A.Thickness of compact laminate : 12mm, Height : 1.2mt 450 mm at top / 300 mm at bottom., S.S L-clamp accessories.,...

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using...

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. in...

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. in...

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. in...

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, c...

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, c...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold a...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold a...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold a...

Providing and laying water proofing treatment to the Retaining wall area with PU Elastomeric Single component liquid applied, cold applied, moisture cured high tensile elastomeric PU waterproofing mem...

Terrace/ Raft & sunken slab waterproofing: Providing waterproof treatment to Raft Slab using 2 coats of acrylic co polymer elastomeric Acrylic co-polymer elastomeric sealer & p...

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffo...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffo...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffo...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffo...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, provi...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, provi...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, provi...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 ...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 ...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 ...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 ...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surfa...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surfa...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surfa...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surfa...

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specific...

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specific...

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specific...

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specific...

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof including cost of material, labour, scaffolding etc as per spec...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including app...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including app...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including app...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including app...

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall s...

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall s...

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall s...

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall s...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterio...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterio...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterio...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterio...

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an e...

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an e...

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an e...

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an e...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, ...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, ...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, ...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, ...

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning ...

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning ...

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning ...

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning ...

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly...

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly...

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly...

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly...

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is...

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is...

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is...

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of ...

Providing,fabricating and fixing Profiled Poly Urethane insulated Roof(PUF Sheet) having modular density 40kg/m2 and size 1.06m width and 7.60m length sheets roof having external sheet of ...

Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges, ...

Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper j...

Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper j...

Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper j...

Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper j...

Providing and fixing of premium quality terracota clay tiles for cladding of size 12x2x2 inches with single hole on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive/ceme...

Providing and fixing of premium quality terracota clay tiles for cladding of size 12x2x2 inches with single hole on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive/ceme...

Providing and fixing of premium quality terracota clay tiles for cladding of size 12x2x2 inches with single hole on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive/ceme...

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles for Toilet of approved texture of size 595 x 595 mm in true horizontal level, s...

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles for Toilet of approved texture of size 595 x 595 mm in true horizontal level, s...

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles for Toilet of approved texture of size 595 x 595 mm in true horizontal level, s...

Construction of Ornamental full Circular Column of outer diameter 0.6 mtr with brick work in CM 1:4 where ever necessary including ornamental plastering 1:2 over existing Circular pillar of size 0.45 ...

Beam Decoration / Cornicing with plastering 1:3 including cost of labour, necessary fom work, etc as per the Approved Drawing and direction of engineer incharge. (Ground Floor) ---- including cost and...

Beam Decoration / Cornicing with plastering 1:3 including cost of labour, necessary fom work, etc as per the Approved Drawing and direction of engineer incharge. (First Floor) ---- including cost and ...

Beam Decoration / Cornicing with plastering 1:3 including cost of labour, necessary fom work, etc as per the Approved Drawing and direction of engineer incharge. (Second Floor) ---- including cost and...

Beam Decoration / Cornicing with plastering 1:3 including cost of labour, necessary fom work, etc as per the Approved Drawing and direction of engineer incharge. (Third Floor) ---- including cost and ...

Sub Estimate -2- Water supply and sanitary

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cist...

Providing and fixing Stainless Steel Grab Bar 600 mm Long with all concealed fitting arrangements & all necessary accesories complete - Class Economy ---- including cost and conveyance of all materia...

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting...

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders wi...

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer - in charge ---- including cost and conveyance of all materials, curing, loading and...

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g ---- including c...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer - in charge ---- including cost and conveyance of all materials, curing, loading and...

Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class (economy) ---- including cost and con...

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g ---- including c...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer - in charge ---- including cost and conveyance of all materials, curing, loading and...

Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class (economy) ---- including cost and con...

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g ---- including c...

Providing and fixing Stainless Steel Grab Bar 600 mm Long with all concealed fitting arrangements & all necessary accesories complete - Class Economy ---- including cost and conveyance of all material...

Providing and fixing Bib cock Two way with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class (economy) ---- including cost and con...

Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class (economy) ---- including cost and con...

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. ---- inc...

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete (b) 20 mm nominal bore) ---- including cost and conveyance of all materials, curing, loa...

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete (b) 25 mm nominal bore) ---- including cost and conveyance of all materials, curing, loa...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : a) 32 mm nominal bore ---- including cost and conveyance of all materials, curing, loading and unload...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : b) 40 mm nominal bore ---- including cost and conveyance of all materials, curing, loading and unload...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : c) 50 mm nominal bore ---- including cost and conveyance of all materials, curing, loading and unload...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : d) 65 mm nominal bore ---- including cost and conveyance of all materials, curing, loading and unload...

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 65mm nominal bore (Horizontal) ---- including cost and conveyance of all materials, curing, loading and unloading w...

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 40mm dia from bore (Horizontal) ---- including cost and conveyance of all materials, curing, loading and unloading ...

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover 180 x 150 mm size P type & With Non Modular common burnt clay ...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing unplasticised PVC connection pipe with brass union 20mm nominal bore length of PVC connection including cost of all materials ,labours and HOM of equipments with all leads complet...

Providing and fixing unplasticised PVC connection pipe with brass union 20mm nominal bore length of PVC connection including cost of all materials ,labours and HOM of equipments with all leads complet...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...

Providing UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tr...

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet ...

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet ...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, pla...

Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approve...

Providing and fixing toilet paper holder : C.P. Brass ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineries an...

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour., 15 mm nominal bore, weighing not less than 32 g ---- including cost and conveyance of all mate...

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour., 20 mm nominal bore, weighing not less than 40 g ---- including cost and conveyance of all mate...

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour., 25mm nominal bore, weighing not less than 62 g ---- including cost and conveyance of all mater...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Refilling available earth around trenches / pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1...

Supplying, installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia including cost of materials, labour, HOM complete as per specifications. ---- including cost and convey...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes...

Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding1000 mm using M20 concrete reinforced with TMT bars Fe 550...

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-cha...

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per...

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engi...

Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding1000 mm using M20 concrete reinforced with TMT bars Fe 550...

Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per t...

Sub Estimate 3- Electrification works

Supplying heavy gauge PVC conduit pipe …….dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceil...

Supplying heavy gauge PVC conduit pipe …….dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of R...

Supplying heavy gauge PVC conduit pipe …….dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of R...

Supplying heavy gauge PVC conduit pipe …….dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of R...

Concealed Conduit System: Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and runn...

Concealed Conduit System: Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and runn...

Concealed Conduit System: Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and runn...

Concealed Conduit System: Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and runn...

Supplying heavy gauge PVC Conduit Pipe ….dia mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cem...

Supplying heavy gauge PVC Conduit Pipe ….dia mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cem...

Supplying heavy gauge PVC Conduit Pipe ….dia mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cem...

Supplying heavy gauge PVC Conduit Pipe ….dia mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cem...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. (75x75x65mm) ---- including ...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. (100x75x65mm) ---- including...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. (135x75x65mm) ---- including...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. (180x90x65mm) ---- including...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. (200x90x65mm) ---- including...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. (135x160x65mm) ---- includin...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. (200x200x65mm) ---- includin...

Supplying and fixing PVC/metal conduit Deep junction box: 19/20mm deep junction box ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour,...

Supplying and fixing PVC/metal conduit Deep junction box: 25mm deep junction box ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hi...

Supplying and fixing PVC/metal conduit Deep junction box: 32mm deep junction box ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hir...

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.: upto 50mm conduit in brick wall -...

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.: upto 50mm conduit CC floor ---- i...

Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using N...

Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using N...

Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using N...

Supplying Galvanized steel flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval o...

Supplying Galvanized steel flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval...

Supplying Galvanized steel flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval ...

Supply and laying of underfloor (concealed) raceways manufactured from 1.5 mm thick cover and base (including partitions for multi compartment raceways), zero spangle pre-galvanized sheet steel with 2...

Supply and laying of underfloor (concealed) raceways manufactured from 1.5 mm thick cover and base (including partitions for multi compartment raceways), zero spangle pre-galvanized sheet steel with 2...

Supply and laying of underfloor (concealed) raceways manufactured from 1.5 mm thick cover and base (including partitions for multi compartment raceways), zero spangle pre-galvanized sheet steel with 2...

Supply and laying of underfloor (concealed) raceways manufactured from 1.5 mm thick cover and base (including partitions for multi compartment raceways), zero spangle pre-galvanized sheet steel with 2...

Supply and laying of underfloor (concealed) raceways manufactured from 1.5 mm thick cover and base (including partitions for multi compartment raceways), zero spangle pre-galvanized sheet steel with 2...

Supply and laying of underfloor (concealed) raceways manufactured from 1.5 mm thick cover and base (including partitions for multi compartment raceways), zero spangle pre-galvanized sheet steel with 2...

Supply and laying of under floor junction boxes shall be of three-piece construction Base box, frame and load plate. Base box shall be robust in its construction manufactured from 1.5 mm thick zero sp...

Supply and laying of under floor junction boxes shall be of three-piece construction Base box, frame and load plate. Base box shall be robust in its construction manufactured from 1.5 mm thick zero sp...

Supply and laying of under floor junction boxes shall be of three-piece construction Base box, frame and load plate. Base box shall be robust in its construction manufactured from 1.5 mm thick zero sp...

Point wiring using Copper wire with switch: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth...

Point wiring using Copper wire with switch: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth...

Point wiring using Copper wire with switch: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth...

Point wiring using Copper wire with switch: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth...

Point wiring using Copper wire with switch: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth...

Point wiring using Copper wire without switch.: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm...

Point wiring using Copper wire without switch.: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm...

Point wiring using Copper wire without switch.: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm...

Point wiring using Copper wire without switch.: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm...

Point wiring using Copper wire without switch.: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC...

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to IS:8130-1984 and vir...

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to IS:8130-1984 and vir...

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to IS:8130-1984 and vir...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Supplying and mounting 2 Nos. of 2 way 6 amps flush type switches either surface/flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wi...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete ...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete ...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete ...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete ...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete ...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (6Amps one way Switch) ---- including cost and conveyance of a...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (6Amps Two way Switch) ---- including cost and conveyance of a...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (6Amps 3way socket) ---- including cost and conveyance of all ...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. ( Stepped Fan Regulator Two Module) ---- including cost and co...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (16Amps one way switch) ---- including cost and conveyance of ...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (32Amps DP switch) ---- including cost and conveyance of all ...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (6/16Amps universal socket) ---- including cost and conveyance...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (TV/Telephone socket) ---- including cost and conveyance of al...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (RJ45/ I.O.outlet Cat-6) ---- including cost and conveyance of...

Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate on 230 Volts, 50Hz AC supply & completely wired on existing box. ---- including cost and c...

supplying 4mm thick white plastic plate and covering for junction boxes of size ……mm conduit using necessary machine screws. (60mm) ---- including cost and conveyance of all material...

supplying 4mm thick white plastic plate and covering for junction boxes of size ……mm conduit using necessary machine screws. (80/90 mm) ---- including cost and conveyance of all mate...

supplying 4mm thick white plastic plate and covering for junction boxes of size ……mm conduit using necessary machine screws. (110mm) ---- including cost and conveyance of all materia...

Supplying 50mm wooden plug, tapered from 50x50mm to 25x25mm and fixing by using binding wire before concreting a roof slab. ---- including cost and conveyance of all materials, curing, loading ...

Supplying….way plastic gang box and fixing using necessary wooden/ rawl/phill plugs and screws., 1 way gang box ---- including cost and conveyance of all materials, curing, loading and unloading wit...

Supplying….way plastic gang box and fixing using necessary wooden/ rawl/phill plugs and screws., 2 to 4 way gang box ---- including cost and conveyance of all materials, curing, loading and unloadin...

Supplying….way plastic gang box and fixing using necessary wooden/ rawl/phill plugs and screws., 6 to 10 way gang box ---- including cost and conveyance of all materials, curing, loading and unloadi...

Supplying and fixing of metal clad industrial plugs and sockets.: 2pole+earth 250V PLUG (16A) ---- including cost and conveyance of all materials, curing, loading and unloading with all lead a...

Supplying and fixing of metal clad industrial plugs and sockets.: 2pole+earth 250V PLUG (32A) ---- including cost and conveyance of all materials, curing, loading and unloading with all lead ...

Supplying and fxing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Ov...

Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are ...

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...

Supplying, fxing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. ---- including cost and conveyance of all materials, curing, loading and unloading with al...

Supplying, fxing and wiring 3 Phase Digital Ammeter / Voltmeter ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of mach...

Supplying, fxing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor ---- including ...

Fabricating supplying and mounting MS box made out ....SWG suitable for foor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...

Supplying, fxing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curre...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Supplying 4mm thick plastic sheet with necessary nitches for fxing switches, regulators etc, and fxing on existing wooden or metal box using N.F. Screws ---- including cost and conveyance of all mater...

supplying and fxing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C ---- including cost and conveyance of all materials, curing, loading and unlo...

Supplyingand fxing angle iron framework fabricated out of M.S. angle iron. And M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. (40 x40 x...

Supplying & fxing miniature circuit breakers on existing MCB distribution boards using necessary fxing materials and 'C' Type curve, indicator ON / OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fxing miniature circuit breakers on existing MCB distribution boards using necessary fxing materials and 'C' Type curve, indicator ON / OFF, energy cross-3 with Short circuit breaking capa...

Supplying&fxing miniature circuit breakers on existingMCB distribution boards using necessary fxing materials and 'C' Type curve, indicator ON / OFF, energy cross-3 with Short circuit breaking capacit...

Supplying and fxing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Ov...

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...

Supplying, fxing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. ---- including cost and conveyance of all materials, curing, loading and unloading with al...

Supplying, fxing and wiring 3 Phase Digital Ammeter / Voltmeter ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of mach...

Supplying, fxing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor ---- including ...

Fabricating supplying and mounting MS box made out ....SWG suitable for foor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...

Supplying, fxing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curre...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Supplying 4mm thick plastic sheet with necessary nitches for fxing switches, regulators etc, and fxing on existing wooden or metal box using N.F. Screws ---- including cost and conveyance of all mater...

supplying and fxing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C ---- including cost and conveyance of all materials, curing, loading and unlo...

Supplying and fxing angle iron frame work fabricated out of M.S. angle iron.. And M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. (...

Supplying & fxing miniature circuit breakers on existing MCB distribution boards using necessary fxing materials and 'C' Type curve, indicator ON / OFF, energy cross-3 with Short circuit breaking capa...

Supplying and fxing Moulded Case Circuit Breaker (MCCB )over the existing wood / panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of ...

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic / FRP / DMC insulato...

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...

Supplying, fxing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. ---- including cost and conveyance of all materials, curing, loading and unloading with al...

Supplying, fxing and wiring 3 Phase Digital Ammeter / Voltmeter ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of mach...

Supplying, fxing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor ---- including ...

Fabricating supplying and mounting MS box made out ....SWG suitable for foor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...

Supplying, fxing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curre...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Supplying 4mm thick plastic sheet with necessary nitches for fxing switches, regulators etc, and fxing on existing wooden or metal box using N.F. Screws ---- including cost and conveyance of all mater...

supplying and fxing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C ---- including cost and conveyance of all materials, curing, loading and unlo...

Supplying and fxing angle iron frame work fabricated out of M.S. angle iron.. And M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. (...

Supplying & fxing miniature circuit breakers on existing MCB distribution boards using necessary fxing materials and 'C' Type curve, indicator ON / OFF, energy cross-3 with Short circuit breaking capa...

Supplying and fxing regular MCCB distribution Panel confrming to IS / IEC 61439-3 and IK 09 tested as per IS / IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suit...

Supplying and fxing regular MCCB distribution Panel confrming to IS / IEC 61439-3 and IK 09 tested as per IS / IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suit...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit break...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit break...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit break...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit break...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit break...

Supplying and fixing regular MCB distribution boards on wall /Wood board/ flush mounting using required clamps, bolts, nuts etc.,with provision for fixing suitable type capacity MCB's single phase / 3...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's sing...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/ panel board. (32-40 Amps 2 pole) ---- including cost and conveyance of all mate...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/ panel board. (63 Amps 2 pole) ---- including cost and conveyance of all materia...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/ panel board. (32-40 Amps 4 pole) ---- including cost and conveyance of all mate...

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percenta...

Supplying, fixing and wiring 0 to 600 Volts 96x96mm AC Voltmeter on existing panel/wood board. ---- including cost and conveyance of all materials, curing, loading and unloading with all lead ...

Supplying, fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter without CT ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, la...

Supplying, fixing and wiring rotary selector switch suitable for Ammeter. ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charg...

Supplying, fixing and wiring rotary selector switch suitable for Voltmeter. ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire cha...

Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter. ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. (...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. (...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. (...

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged fron...

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged fron...

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged fron...

Supply and Installation / Fixing / Provision of Pole box with HRC Fuse / MCB provision and suitable connector / terminal for 3 Ph / 1 Ph connections with Loop-In & Loop- Out term...

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting. ---- including cost and conveyance...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 ( 16 Sq...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 (25 Sqm...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 ( 70 Sq...

Laying of cable in Existing Trench / GI pipe / Stone Ware / RCC Hume pipe using Wooden / Aluminum Rollers as directed by the departmental staff (2.5 sqmm to 25 sqmm) ---- including cost and conveyance...

Laying of cable in Existing Trench / GI pipe / Stone Ware / RCC Hume pipe using Wooden / Aluminum Rollers as directed by the departmental staff (35 sqmm to 95 sqmm) ---- including cost and conveyance...

Supplying Bitumen Compound and covering the cable joint/ pot heads ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of m...

Supplying Epoxy Resin and covering the cable joint. ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineries and ...

Supply and wrapping the conductor with camabrick tape roll. ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machine...

Supplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. (150x50mm) ---- including cost and conveyance...

Supplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. (300x50mm) ---- including cost and conveyance...

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. (8 SWG GI Wire) ---- i...

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. (8 SWG Copper wire.) -...

Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- including cost and conveyance of all materials, curi...

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/...

Supplying and drawing UTP-CAT 6E LAN cable. ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineries and equipmen...

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. (2Pair) ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lift...

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. (50pair) ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and li...

Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6. ---- including cost and conveyance of all materials, curing, loading and unloading with all lead a...

10Port Gigabyte (manageable) ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineries and equipment etc., complet...

24 port 10/100 Switch ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineries and equipment etc., complete and a...

48 port 10/100/1000 Switch ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineries and equipment etc., complete ...

Supplying & fixing of I/O socket with back box, Single I/o ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineri...

Supplying & Fixing of …Mtrs Cat 6 Patch Cable (1mtr) ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineries a...

Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wir...

Supplying, installation, testing & commissioning of 12V. AH batteries in polypropylene container for D.G.sets. Low maintenance batteries, plate type. (40 AH capacity) ---- including cost and conveyanc...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried...

Supplying fixing and wiring earth electrode for grounding of lifts,transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. (25x3mm GI strip) ---- including cost and conveyance of all materials, curing,...

Providing and fixing of 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts / nuts and washer or welding as required. (150 x 50 mm) ---- including cost and co...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. And M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...

Providing and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. (150x50mm) ---- including cost and conveyance...

Supply of round/ square recess / surface mounted rolling type LED Down light with .WGU10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swive...

Supply of round/ square recess / surface mounted rolling type LED Down light with .WGU10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector and has swi...

Supplying of recess mounting non integral type . LEDw luminaire comprising of pressure decast / extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, ...

Supplying and fxing of LED Bulk head of 10W with IP 65 protection and IK 08 impact resistance suitable for surface and wall mounting applications. ---- including cost and conveyance of all materials, ...

Krone Box (50 pairs) ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineries and equipment etc., complete and al...

Krone modules for 10 pairs isolation type ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineries and equipment ...

supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6. ---- including cost and conveyance of all materials, curing, loading and unloading with all lead an...

Fixed Camera Specifications- 1) Lens type: Bi-focal auto iris with 10 x digital zoom, 2) Mode: Day/Night, Image size: 720x486 (NTSC), 3) Streaming: High speed, 4) Weather Proof: IP 66 compliant, 5) Ne...

erection, Installation and commissioning of CCTV Surveillance system, Fixed Camera ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, h...

Miscellaneous Materials- Caution/Danger Board ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineries and equipm...

fixing Danger Board ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineries and equipment etc., complete and all...