ADDITION / ALTERATION/RENOVATION TO P-4 BUILDING FOR SETTING UP GE(I) CG CHENNAI AT RHQ(EAST) CHENNAI UNDER GE(I) CG CHENNAI

Amount

Roughening the sufaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust,etc. Complete all specified and as directed.

Material and labour for 25 mmm thick PCC type B 0, 1:2:4,using 12.5 mm graded granite stone aggregate as in roof padding finsihed even and fair surface without using extra cement coplete all as specified and as directed.

M & L for applying 2 coats of water proofing dampshield 2K or home shield damp stop on affected dampness areas and work carried out through manufacturer complete all as specified and directed. (Make :- Berger and equivalent).

M & L for Providing and applying two coats of Dekguard PU/ Nitoproof UR Top coat @ minimum 100 microns dry film thickness in two coats over the Polyurea waterproofing using rubber squeegee and back rolled with lambswool roller. Complete Item carried out through Fosroc Manufacturer

Material and Labour of cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight ) complete all as specified and as directed.

Supply and fix in stainless steel (Grade 316) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) including removing serviceable tiles to store and rubbish off the premises not exceeding 100 metre complete all as specified and as directed.

Material and labour for virtified ceramic coloured tiles ,Premium quality , Light shade (shade as approved by GE) . 9 to10 mm thick (square/rectangular) area of each tile exc. 0.18 sqm but not exc. 0.38 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:3 , 20 mm thick complete all as specified and as directed. Note :Make of Vitrified ceramic tile:Johnson/Khajaria/Somany/Orient Bell Limited

Material and labour for virtified ceramic coloured tiles ,Premium quality , Light shade (shade as approved by GE) , 9 to10 mm thick (square/rectangular) area of each tile exc. 0.18 sqm but not exc. 0.38 sqm in Vertical surfaces such as dado ,skirting etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:3 , 10 mm thick complete all as specified and as directed. Note :Make of Vitrified ceramic tile:Johnson/Khajaria/Somany/Orient Bell Limited

Material and labour for Non skid ceramic coloured tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 20 mm thick complete all as specified and as directed. Note :Make of Vitrified ceramic tile:Johnson/Khajaria/Somany/Orient Bell Limited

Material and labour for Glazed coloured tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile not exc. 0.18 sqm in verticals etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:3 ,10 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Taking down chowkhats or frames with shutters not exceeding 1.5 sqm each (without taking off shutters from the frame) including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Taking down chowkhats or frames with shutters exceeding 1.5 sqm and not exceeding 4.0 sqm each (without taking off shutters from the frame) including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Taking down shutters of any description exceeding 1.0 sqm but not exceeding 2.0 sqm each and taken as credit complete all as specified and as directed.

Supply and fix powder coated aluminium frames and grills for windows, ventilators with one or more rebate including joining cleats, glazing clips rubber packing anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of powder coating 50 microns.

Supply and fix powder coated aluminium window and ventilator shutters ,sliding type without sash bar , aluminium section weighing 0.55 kg/RM including joining cleats, glazing clips rubber neoprene packing , powder coated alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of anodisation 50 microns.

Supply and fix powder coated aluminium door shutters, aluminium section weighing 0.55 kg/RM including joining cleats, glazing clips rubber neoprene packing , handle 02 Nos in each door and hinges , powder coated alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of anodisation 15 microns.

Supply and fix Powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum powder coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved powder coating aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

Supply and fix Plain sheet glass pane 4.80 mm thick ordinary quality and glazing with oil putty or beads in squares n exc 0.5 sqm in each pane complete all as specified and as directed. Note :(i) Make of Glass : Saint gobain/Modi Guard/Gold Fish

Supply and fix Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to wooden frames complete al as specified and as directed

Material and labour for Preparation of old plastered wall surfaces including pilasters and cornices and applying one coat of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for 2 mm thick Wall Care Putty including cleaning the wall surface with the help of sand paper, putty blade or wire brush and then apply 1st putty coat on moistened surface and after surface dried , rub gently with wet sponge, then allow the surface dry for 3 hours and similarly apply second coat and leave for 10-12 hours and finally rub with very fine emery paper to obtain glossy surface complete all as specified and as directed. Note:Make of wall putty :Jk White cement/Birla Wall care putty

Material and labour for Preparation of plastered or un plastered old surfaces of wall including pilasters and cornice etc and applying one coats of white wash complete all as specified and as directed.

Material and labour for Preparation of plastered or un plastered old surfaces of ceiling and applying one coats of white wash complete all as specified and as directed.

Supply & Fix 20 mm dia stainless steel decorative curtain rod fixing to all opening and joineries portion complete all as specified and as directed.

Material and Labour for stainless steel bracket with end holders complete all as specified and as directed.

Demolition of plain cement concrete in groud floors and pavings not exceeding 15 cm thickness including removal of debris off the premises to a distance not exceeding 100 metres complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins,arches, pillars etc but excluding ashlar facing, dressed stonework and precast concrete articles protions ordered to be dismanted including removal of debris off the premises to a distance not exceeding 100 metres complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key, scrubbing down with water etc and removing rubbish off the premises, removal and depositing servicable materials where directed complete all as specified and as directed

Demolition of Reinforced cement concrete (other than ground floors) as in landing, chajjas, beams and other suspended work (reinforcement cut as required to facilitate demolition) including removal of debris to a distance not exc 100 metres and steel scrap taken as credit complete all as specified and as directed

Material and labour for Reinforced cement concrete 1:2:4 concrete type B0 using 12.5 mm graded stone aggregate as in repair of chajja, cill, facia, parapet etc. including necessary formwork complete all as specified and as directed

Material and labour for Brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for Rendering in CM 1:6, ,15 mm thick on fair faces of brick work surfaces and mixed with WPC as per manufacuture instructions,finished even and smooth without using extra cement complete all as specified and as directed. Note: WPC will be measured and paid separtely

Material and labour for Rendering in CM 1:4, ,10 mm thick on other than fair faces of brick work surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply only Liquid Water Proofing Compound . Make of water proofing compound : Impermo/Roff/Cico

Material and labour for Preparation of newly plastered surfaces of wall including pilasters and cornice etc and Distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and as directed.

Material and labour for Preparation of newly plastered surface of wall including pilasters and cornice etc and apply two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over surfaces complete all as specified and as directed.

M & L for Preparation of new wall surfaces and applying two coats textured exterior paint of required shade applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and as directed.

Supply and fix Factory made 35 mm thick second class hard wood plain framed, panelled shutter (any number of panel) with lock rail with well seasoned wood fitted with panel of 9mm B.W.P. commerical ply or 12 mm thick venneered particle board with commerical veneering on both faces fitted to chowkats with rail and stile as per IS 1003 Part-1 kiln seasoned and chemically pressure treated complete all as specified and as directed.

Material and labour for Second class hard wood plain, solid , straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints etc complete all as specified and as directed.

Supply and fix Factory made Second class hard wood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided in to square (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc,sizes of members of shutters as specified in SSR part I, Section 8, clause 8.24 (a),fitted to chowkat complete all as specified and as directed.

Supply and fix Mild steel hold fast made of flat iron conforming to Fe-290 Gde E-165 of size 25 x 3 mm bent to shape required with splitting end and drilling holes for fixing nuts & bolts (including nuts & bolts) including treating the steel surfaces with tar or coal tar black paint and sanding neatly newly tarred surfaces with clean sharp san

Supply and fix Flush shutters 19 mm thick, factory made solid core construction, with particle board core & plywood face panels, commercial type on both sides and fixed to chowkats complete all as specified and as directed.

Supply and fix 125 mm long Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and as directed.Make:Crown/Adarsh/Atul

Supply and fix 200 mm long Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and as directed.Make:Crown/Adarsh/Atul

Supply and fix in repairs 250 mm long Aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.Make:Crown/Adarsh/Atul

Supply and fix 75mm butt hinges medium weight, cold, rolled mild steel complete all as specified and as directed.

Supply and fix 100 mm butt hinges medium weight, cold, rolled mild steel complete all as specified and as directed.

Supply and fix I 00mm ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed.Make :Crown/Classic /ESS ESS

Supply and fix 100 mm long aluminium handles anodised fabricated type complete all as specified and as directed.Make :Crown/Classic /ESS ESS

Supply and fix 150 mm long aluminium handles anodised fabricated type complete all as specified and as directed.Make :Crown/Classic /ESS ESS

Material and labour for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of old painted steel or iron surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down old rusted steel water tubing of size 15 mm bore with all fittings, concealed type including connection from wall/floor ceiling and separating serviceable pipes and setting aside for reuse and unserviceable pipes taken as credit complete all as specified and as directed

Taking down old rusted steel water tubing of sizes 20 mm bore with all fittings, concealed type including connection from wall/floor ceiling and separating serviceable pipes and setting aside for reuse and unserviceable pipes taken as credit complete all as specified and as directed.

Supply and fix 20 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed .Make :SFMC/Vectus

Supply and fix 25 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed .Make :SFMC/Vectus

Supply and fix in repair 1000 litres capacity rotational moulded polyethylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I ,ISI Marked including dismantling old water tank and taken as credit complete all as specified and as directed. Make :Sintex/Polycon (ISI Mark

Supply and fix in repair 20 mm bore dia Ball brass valves, high pressure, with polyethene float & fly-nut complete, screwed for GI pipe or brass ferrule complete all as specified and as specified.

Supply and fix in repairs vitreous china wash down water closet Single piece (size-840mmx390mmx720 mm) trap distance P-180 suite composite flushing cistern (Pedestal pattern), white colour including fixing bolts with flush pipe, including flushing cistern with connection pipe and old unserviceable wash down water closet taken as credit complete all as specified and as directed Make:- Jaquar VGS-WHT-0207P'

Supply and fix in repairs wash basin (Size 875 X 610 X 475mm) with full pedastal floor standing, white colour flat back excluding taps but including waste,plug and porcelain stopper including MS brackets etc. complete including cutting for and pinning in ends of brackets supply and waste pipe and old unserviceable wash basin taken as credit complete all as specified and as directed Make:- Jaquar FSN-WHT-0613'

Supply and fix in repairs swan neck pillar tap with capstom heads,chromium plated fancy type, with large screwed shanks and fly nuts screwed for 15mm bore pipe and old unserviceable pillar tap taken as credit complete all as specified and as directed Make : Jaquar 'KUB-35001F'

Supply and fix in repairs bib cock 15mm dia size Chorium plated fancy type screwed down,screwed for iron pipe with extended lever and wall flange and old unserviceable bib cock taken as credit complete all as specified and as directed Make : Jaquar 'FLR-5043.

Supply and fix in repairs Health Faucet, chromium plated fancy type, of 15mm bore pipe with 1.5 Metre long flexible tube & wall hook and old unserviceable health faucet taken as credit complete all as specified and as directed Make : Jaquar 'ALD-573'

Supply and fix in repairs Stainless steel Toilet Paper holder, fancy type and old unserviceable Toilet paper holder taken as credit complete all as specified and as directed Make : Jaquar 'AHS-1551'

Supply and fix in repairs Stainless steel single Towel rail 600mm long with hook fancy type and old unserviceable towel rail taken as credit complete all as specified and as directed Make : Jaquar 'AKP-35711P'

Supply and fix in repairs concealed angle cock fancy type bore of pipe 15mm chromium plated with long shank and cup and old unserviceable =angle cock taken as credit complete all as specified and all as directed. Make : Jaquar 'FON-40083K'

Supply and fix in repairs Overhead shower (Size 150x150mm) square shape single flow ( body & face plate of brass with chrome plated) with rubit cleaning system and old unserviceable over head shower taken as credit complete all as specified and as directed Make : Jaquar 'OHS-1805'

Supply and fix in repairs soap dish Polycarbide fancy type and old unserviceable soap dish taken as credit complete all as specified and as directedMake : Jaquar 'AQN-7733'

Supply and fix in repairs glass shelf 600mm long with bracket and old unserviceable glass shelf taken as credit complete all as specified and as directed Make : Jaquar 'CAN-1171N'

Supply and fix in repairs CP wall mixer with L Bend (Provision of OH shower) screwed down for iron pipe and fixed and old unserviceable CP wall mixer taken as credit complete all as specified and as directed Make Jaquar SOL-6281

Supply and fix Hand dryers of material ABS smart flow, white finish and old unserviceable Hand drier taken as credit complete all as specified and as directed. Make : Jaquar "HDR-WHT- M04A .

Material and labour for Cutting holes into or through brick walls built in cement mortar or cement lime mortar of superficial area exc 150 sq cm but not exc 400 sq cm complete all as specified and as directed.

Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube as per specification & drawing complete all as specified and as directed.

Supply and fix Factory made solid panel PVC foam profile with homogeneous free cellular structure having smooth and integral skin door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC Ç'channel and a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specification and drawing complete all as specified and as directed

Dismantling wall and ceiling boards (Fibre,pulp,insulation etc) or insulation boards/slabs/blankets , any thickness including cover fillets and taken as credit complete all as specified and as directed.

S&F 8mm thick gyprex dew drop is a laminated gypsum ceiling tile 595 mmx 595 mm, provided with GI snap grid powder coated powder coated, T Length 3600 mm With 24mm High 38mm Thick 0.3 ,Cross T Length 1200mm With 24 mm High 25mm Thick 0.3mm , Cross T Length 600mm with 24 mm high 25mm, Thick 3mm .Hangar bars provided 4mm dia Rod , and snap grids should be provided with butterfly adjustable clip. The gypsum tiles are laminated with a textured white colour PVC film on the face side and a Metalized Polyester (MPL) film for diffusing heat & vapour on rear side.Edge types : Square Edge (SE) Colour : White Light Reflectance : >80% Humidity Resistance : Upto RH 90% Lamination (Face Side) : 0.07mm Textured Rigid Poly Vinyl Film, Lamination (Rear side) : 12 micron Metalized Polyester FilmApplication: Ceilings for Superior Aesthetics, Easy Maintenance & Faster Installation. Best Suited for Offices, Shops, Boutiques & common areas in all segments , installtion shall be complete all as specified and directed by engineer in charge

Demolition and breaking up drain pipes, 150 mm dia (PVC, salt glazed stone ware, AC or reinforced concrete) set in cement mortar including removal of debris off the premises not exceeding 100 meter complete all as specified and as directed.

Material and labour for Salt glazed stoneware (SGSW) grade 'A' drain pipes 150mm bore laid in trenches and jointed in cement mortar 1:1 on Concrete bed complete including testing etc and concrete bed to drain pipes of bore 150mm including packing under and haunching against the sides of pipes after they are laid and treated in cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate and testing complete all as specified and as directed. Note:-(i)Excavation and earth work shall be measured and paid separately under relevent items . .(ii) Make of SGSW pipe:M/S TSL

Excavating in trenches not exceeding 1.5 M wide and not exc 1.5 metre deep and getting out in soft/loose soil complete all as specified and as directed

Returning, filling in soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specifed and as directed.

Removing excavated material exceeding 500 meter and not exceeding 1.50 KM depositing where directed at a level not exceeding 1.5m above the starting point complete all as specifed and as directed.

Dismantling of rain water pipe and sewage line pipes of any type and size including all fittings and removal of debris off the premises not exceeding 100 metres complete all as specified and as directed.

Supply and fix 110mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors /fixed to walls with clamps complete all as specified and as directed.Make:Finolex/Trubore/Supreme

Supply and fix 75mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors / fixed to walls with clamps complete all as specified and as directed.Make:Finolex/Trubore/Supreme

Supply and fix PVC (SWR) bend ,any radius ,110 mm bore fitted with oval access door complete all as specified and as directed..Make:Finolex/Trubore/Supreme

Supply and fix PVC (SWR) bend ,any radius ,110 mm bore complete all as specified and as directed..Make:Finolex/Trubore/Supreme

Supply and fix PVC (SWR) bend ,any radius ,75 mm bore fitted with oval access door complete all as specified and as directed..Make:Finolex/Trubore/Supreme

Supply and fix PVC (SWR) reducers ,any radius ,110 mm bore complete all as specified and as directed..Make:Finolex/Trubore/Supreme

Supply and fix 110 mm bore PVC(SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and as directed..Make:Finolex/Trubore/Supreme

Supply and fix PVC(SWR)vent cowl 75 mm dia .Make:Finolex/Trubore/Supreme

Material and labour for preparation of old wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Taking down carefully point wiring with copper/aluminium conductor (light,fan, socket or power complete ) and fittings such as switches,ceiling roses,pendents,regulators,sockets,light fittings,calling bell etc and removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.

Taking down carefully submain wiring with aluminum conductor cable 4/6/2.5/1.5 Sqmm in PVC conduit complete including making good the disturbed surface of wall / floor etcand removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.

Taking down carefully unserivce able TPN/SPN DB with MCBcomplete including making good the disturbed surface of wall / floor etcand removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor FRLS PVC insulated cable 1100 volts grade single core drawn into and including non mteallic rigid PVC conduit of size 25 mm dia concealed in wall/floor etc along with 1.5 sqmm unsheathed multi stranded copper conductor FRLS cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling/ roof with and including PVC recangular board of adequate size for mountling switches, socket, fan regulators etc complete for the following points complete all as specified and as directed. Note: (i)Make of PVC cable : Finolex/ Polycab/Plaza.(ii) Make of PVC Conduit :Avon Plast/Presto Plast/Finolex

One light point controlled by one switch

One fan point controlled by one switch

Call bell points.

Material and labour for Sub main wiring with two runs single core 6 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 6 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC Casing caping in surface/recessed as required etc complete all as specified and as directed. Note: (i)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL.(ii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iii) Three different colour cable shall be used for phase,neutral and earth. (iv) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles.

Material and labour for Sub main wiring with two runs single core 4 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 4 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC Casing caping in surface/recessed as required etc complete all as specified and as directed. Note:. (i)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL (ii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iii) Three different colour cable shall be used for phase, neutral and earth (iv) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles.

Material and labour for Sub main wiring with two runs single core 2.5 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 2.5 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC Casing caping in surface/recessed as required etc complete all as specified and as directed. Note:. (i)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL (ii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iii) Three different colour cable shall be used for phase, neutral and earth (iv) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles. (v) To be measured for 15 Amp socket and DB to main switch box

Material and labour for Sub main wiring with two runs single core 1.5 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 1.5 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC Casing caping in surface/recessed as required etc complete all as specified and as directed. Note:. (i)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL (ii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iii) Three different colour cable shall be used for phase, neutral and earth (iv) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles. (v) To be measured for 5 Amp socket and DB to main switch box

Supply and fix Switch piano flush type single pole one way 5 Amp complete all as specified and as directed.

Supply and fix Switch piano flush type single pole one way 16 Amp complete all as specified and as directed.

Supply and fix modular white cover plate with frame 3- Module including taking down old unserviceable cover plate and taken as credit complete all as specified and as directed.. Make:- ANCHOR/LEGRAND/ABB

Supply and fix modular white cover plate with frame 4- Module including taking down old unserviceable cover plate and taken as credit complete all as specified and as directed.. Make:- ANCHOR/LEGRAND/ABB

Supply and fix modular white cover plate with frame 6- Module including taking down old unserviceable cover plate and taken as credit complete all as specified and as directed.. Make:- ANCHOR/LEGRAND/ABB

Supply and fix modular metal flush box for 3 Module including taking down old unserviceable metal box and taken as credit complete all specified and as directed.. MAKE:ANCHOR /LEGRAND/ABB

Supply and fix modular metal flush box for 4 Module including taking down old unserviceable metal box and taken as credit complete all specified and as directed.. MAKE:ANCHOR /LEGRAND/ABB

Supply and fix modular metal flush box for 6 Module including taking down old unserviceable metal box and taken as credit complete all specified and as directed.. MAKE:ANCHOR /LEGRAND/ABB

Supply and fix Switch socket combination 5 pin, 6 Amp flush type universal complete all as specified and as directed.

Supply and fix Switch socket combination , 3 pin, 6 to 16 Amp flush type universal 02 Module complete all as specified and as directed.

Supply and fix Ceiling rose, surface type, PVC of 25 x 50mm, two to three terminals AC 230 V complete all as specified and as directed.

Supply and fix Modular bell push flush type single pole two way 5 Amp complete all as specified and as directed.

Supply and fix Modular type electronic fan regulator 120 W 2 Module etc complete all as specified and as directed.Make:Anchor/Rider

Supply and fix calling bell AC, 240 volts single phase complete all as specified and as directed. Make:- Bajaj/Phillips/HPL

Supply and fix sheet metal enclosure for Board distribution double door with 200 Amps double door rated bus bar TPN 4 way complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and fix MCCB 160 Amps, 415 Volts, Rupturing capacity 36KA all as specified and directed complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and fix MCB TP 63 Amps, 415 Volts, Rupturing capacity 16Ka all as specified and directed complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and fix sheet metal enclosure for Board distribution double door with 200 Amps rated bus bar SPN 4 way Make:- C&S/HPL/Legrand

Supply and fix sheet metal enclosure for Board distribution double door with 200 Amps rated bus bar SPN 8 way Make:- C&S/HPL/Legrand

Supply and fix sheet metal enclosure for Board distribution double door with 200 Amps rated bus bar SPN 12 way Make:- C&S/HPL/Legrand

Supply and fix MCB SPN 5 to 30 Amps, Repturing capacity 10KA complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and fix MCB SP 5 to 16 Amps, Repturing capacity 10Ka complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and fixing sheet metal enclosure with socket plug top and MCBs complete single pole and netural enclosure with 3-pin and earth plug and socket complete with single pole MCB 30 Amp capacity including fixing in walls dully embedded complete all as complete directed.

Supply and Fix Recess mounted 2' x 2' LED flat panel 34W ,4000k high efficiency with high brightness LED for glare free homogenous illumination mounted square slim and elegant downlight/panel for indoor application with high aesthetic appeal,available in various wattage for soothing light suitable for grid ceiling with super bright LED model complete with all accessories internally pre wired and connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old one and taken as credit complete all as specified and as directed. Havells Cat part No VENUSNEOHE2X2PLR18-42WLED865MOD or equivalent in Philips/Cromtpon/surya/Bajaj

Supply and Fix wall/surface mounted LED batten 20W (or nearest higher Wattage) & luminous efficacy more than 100 lm/W with integrated sleek extruded aluminium housing with diffuser complete all as specified and as directed. Make : Havells cat part No VENUSNEOHE2X2PLR18-42WLED865MOD or equivalent in Philips/Cromtpon/surya/Bajaj

Supply and Fix wall/surface mounted LED batten 10W (or nearest higher Wattage) & luminous efficacy more than 100 lm/W with integrated sleek extruded aluminium housing with diffuser complete all as specified and as directed. Havells Cat part No ENDURALINEARNEOBS10WLED865SPCWH or equivalent in Philips/Cromtpon/surya/Bajaj

Material and labour for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick, burried directly in ground (earth pit not less than2.25 Metre, deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to galvanized iron strip 32 x 6mm by means of bolts, nuts washers checknuts of galvanized or steel all as shown in electrical plate No 3 of SSR Part I connected to earthing test points all as specified or indicated including 25 Kgs of Bentonite powder and excavation and earth work, PCC 1:2:4 type 1 in chamber, RCC cover 40mm thick in 1:2:4, type B1 (20mm graded aggregate) with 8mm MS rod at 15cm in both ways hook, funnels with 40mm dia protection pipe and 20mm dia medium grade watering pipe, wiremesh and GI lugs, GI protection pipe and testing on completion complete all as specified and as directed

Material and labour for Earth continuity conductor or main earthling lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop eatthing etc as required 20x3mm copper strip complete all as specified and as directed

Supply and fix 5 Star rating ceiling fan 1200mm sweep Min air delivery 210 CFM with service value of 6.0 BEE five star rated with brush less direct current motor (BLDC).” suitable to work on single phase AC 230 Volts 50 Hz complete including connecting electrically to ceiling rose or connector block using PVC insulated sheathed 3 core cable 0.75sqmm flexible copper conductor complete all as specified and as directed. Make : Anchor/Havells/Crompton

Supply and fix heavy duty exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver all as specified and directed. Make : Havells/Crompton/Almonard

kvs constructions

DJ Group

Kaadosh Real Estates Pvt Ltd

M/s KM Marimuthu Achary