Tcmc_Maintanence and Repair Work to Silver Jublee Park Garden Area In Ward No 36

Amount

Providing and laying in position standardised concrete mix M-20 Grade in accordance with IS 456-2000 using 20mm and down graded hard broken jelly for all RCC items of works with minimum cement content of 3250kg/10cum and maximum water cement ratio of 0.50

Fly Ash Brick work In CM 1:5 mix using best Fly Ash Bricks of size 230 x 110 x 70mm including finishing, curing etc., complete complying with standard specification.

Plastering in cement mortar 1:5 mix 12mm thick using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering

Supply, fabricating & fixing in position of M.S Doors / Windows / Ventilators / Gates / Grills of required of size suitable to site condition using necessary 'L' Angles, flats, I sections covered with 18 gauge M.S.Sheet with one coat red oxide primer incl

White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder, fevicol type gum, brushes, scaffolding charges etc., complete complying with standard specification.

Painting two coats with ready mixed Plastic Emulsion paint (weather proof) of approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt and including necessary plaster of paris, putty wherever required etc., compl

Painting two coats for New iron work surface using best quality synthetic enamel paint etc complete complying with standard specification.

Earthwork excavation for foundation in all soils and sub soils except in hard rock requiring blasting and depositing on bank with initial lead of 10m and initial lift of 2m inclusive of shoring, shuttering, bailing out water wherever necessary, refilling

Plain Cement concrete 1:4:8 [one cement, four sand and eight course aggregates] using 40mm size Hard Broken / Machine crushed Granite Stone Jelly including dewatering if found necessary and laid in layer so not more than 15cm thick and compacted etc., com

Fly Ash Brick work In CM 1:5 mix (one cement and five sand) using best Fly Ash Bricks of size 230 x 110 x 70mm including finishing, curing etc., complete complying with standard specification.

Plastering with cement mortar 1:5 mix, 12mm thick in all floors using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surfa

Flooring with 38 / 40mm thick Cuddapah Slab over a base of CM 1:3 (one cement three M-sand), 20mm thick and pointed with cement mortar 1:3 using black oxide etc., complete complying with standard specification.

Painting two coats with ready mixed Plastic Emulsion paint (weather proof) of approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt and including necessary plaster of paris, putty wherever required etc., compl

Supply and erection of 24W LED Street lighting System with UG cable and accessories including installation charges etc., complete (as per Lowest Quotation)

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe pos

See Saw 4 Seater - Fiber reinforced plastic of width 7ft 0" and supporting frame made of 40mm GI Pipes and Swinging Arm made of 50mm GI Pipes of length 8ft 0". Handle made of 19mm GI pipes Seats are fibre reinforced plastic and including epoxy painting et

Slide - 5ft Height wave slide made of FRP moulded materials and ladder 1 inch G.I pipe and ½ inch cross steps supporting of 1 ¼” inch G.I pipe.

Slide - 5ft Height wave slide made of FRP moulded materials and ladder 1 inch G.I pipe and ½ inch cross steps supporting of 1 ¼” inch G.I pipe.

Slide - 5ft Height wave slide made of FRP moulded materials and ladder 1 inch G.I pipe and ½ inch cross steps supporting of 1 ¼” inch G.I pipe.

Ehan Construction (BID ID -1419257)