SPL REPAIRS TO BLDG NO P-254 AND ADDN ALTN TO DOORS AT AF SCHOOL AT HQTC

Amount

COMMON ITEMS APPLICABLE FOR JOB 'A' & JOB 'B'

Taking down of chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frames) and set aside or removing from site complete all as specified and as directed.

Taking down of chowkats or frames exc 1.5 sqm but n. exc 4 sqm each (without taking off shutters from the frames) and set aside or removing from site complete all as specified and as directed.

S&F 150 mm alluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and as directed.

S&F in stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including beads complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or Kg riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 height complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement. including mixing of water proofing compound wherever required as per manufacturers instructions complete all as specified and as directed. (WPC shall be measured & paid separately)

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Rendering 10 mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling of chajja ,roof projection,shelve etc and finished even and smooth without using extra cement complete all as specified and as directed.

M&L Complete removal of existing treatment of old plastered surfaces of walls and applying through mechanical means of two coats of oil bound distemper over a coat of alkali resistant primer over and including applying 1 mm thickness putty to prepare the surface even and smooth complete all as specified and as directed.

M&L Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete(unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L 25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) as in flooring, rough finish surfaces for receving top layer complete all as specified and as directed.

M&L Coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors etc. set and jointed in neat cement slurry over and including a 15 mm thick screed bed of cement mortar 1:6 and pointed with white or Coloured cement to match complete all as specified and as directed.

M&L for Coloured Glazed ceramic design tiles 350x 250x 7mm/ 450X 350X 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and as directed.

S&F PVC Flushing cistern 10 Ltr capacity valveless syphonic action type low level, white, with inlet ,ball valve float and handle including brackets and flush pipe complete all as specified and as directed.

S&F Vitreous china wash down water closet (Pedestal pattern, ETWC), white (including fixing bolts, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.,disposal of unserviceable materials, debris and rubbish to a distance complete all as specified and as directed.

M&L for Precast cement concrete block masonry with solid blocks type C1, 1:3:6 using 20 mm graded aggregate exc. 10 cm in width and setting in mortar 1: 6 , complete all as specified and as directed.

M&L for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type C1, 1:3:6 ( 20 mm graded aggregate) and setting in mortar 1:6 , complete in walls complete all as specified and as directed.

Removing old dumped junk/ building materials/ debris/ tree roots, trunk, & branches of any size etc. to a distance of 30Km or beyond, out of premises of metropolitan area, including loading, unloading by manually or by mechanical means (JCB) and to be transported through tractor-trolly or tipper and stacking at the destination complete all as specified and as directed.

Supply only liquid water proofing compound of approved quality complete all as specified and as directed.

ITEMS APPLICABLE FOR JOB 'A'

S&F for Pressed steel Size of frame 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified complete all as specified and as directed.

S&F for Pressed steel Size of frame 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F Factory made 2nd class hard wood 35 mm thick plain framed panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P comeercial ply or 12 mm veneered particle board with commercial vrneering on both faces. The size of rail and stile as per IS ; 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter,with particle board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

M& L for mild steel gauzed shutter made out of Rectangular tube Main frame size (50mm x 25mm x 3mm ) and 8mm MS Square guard bar top and bottom with stainless steel fly proof wire mesh having stainless steel 0.50mm nominal dia wire and 1.20mm average width of aperture including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. (Note : Mild Steel door Painting shall be done by spray Gun ).

S&F 4.8 mm thick sheet glass ordinary quantity and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

S&F for 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work and aluminum frame work etc complete all as specified and as directed.

S&F for Powder coating (minimum thickness of powder coating 50 micron) aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F Powder coating (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed. ( Note : sheet Glass and SS wiremesh shall be measured & paid separately). .

Dismantling structural steel work including doors, gates ,steei window and similar works but excluding framed truss etc complete all as specified and as directed.

S&F in repair 18 mm thick veneered decorative plywood, grade 1( with BWR resin), with decorative face veneers on both faces fixed with screws to timber frame work for built in cupboards, shelves,almirahs etc complete all as specified and as directed.

S&F Stainless steel clip on auto closing panel concealed hinges thickness 15-22 mm for full overlay door 0 degree crank for cupboard door complete all as specified and as directed.

S&F in repairs Brass Mortice lock, vertical type, size 100 mm 4 levers include for escutcheon plates and two keys complete all as specified and as directed.

S&F 100mm long magnetic catch complete all as specified and as directed.

S&F 100 mm long Stainless steel handles, fabricated type polished complete all as specified and as directed.

S&F for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F for 100 mm long Mortice latch with two levers (vertical type), brass body and fixed complete all as specified and as directed.

S&F for 75mm Stainless steel butt hinges, medium weight, and fixed.all as specified and as directed.

S&F for 100mm Stainless steel butt hinges, medium weight, and fixed complete all as specified and as directed.

S&F for 200 mm alluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and as directed.

S&F for 150 mm long Stainless steel handles, fabricated type polished complete all as specified and as directed.

S&F for 300 mm size mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F for Floor door stopper of aluminium alloy body and tongue Overall length of cover plate 140mm long , anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F in repairs Powder coated fancy type Stainless Steel curtain rod 25mm dia with 2 nos suitable SS brackets with 2 nos suitable wooden round base and fancy type end top matching to curtain rod of make as approved by GE complete all as specified and as directed. [Note : Additional supporting bracket shall be provided if length is exceeding 1.2m to 1.80m and rate quoted shall include for the same ]

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment for along the external wall below concrete or masonry @ 2.25 ltrs per liners metre incl drilling and plugging holes etc in apron complete all as specified and as directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors @ one litre per hole, 300mm apart incl drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and as directed.

M&L for preparing new plastered surfaces of walls and applying through mechanical means Two coats of oil bound distemper over a coat of primer over using roller and including applying1 mm thickness putty to prepair the surface even and smooth complete all as specified and as directed.

M&L for preparing new plastered ceiling surfaces of applying through mechanical means Two coats of oil bound distemper over a coat of primer over and including applying 1 mm thickness wall care putty to prepare the surface even and smooth complete all as specified and as directed.

M&L for complete removal of existing treatment of old plastered ceiling surfaces of applying through mechanical means Two coats of oil bound distemper over a coat of primer over and including applying 1 mm thickness wall care putty to prepair the surface even and smooth complete all as specified and as directed.

M&L Preparation new plastered surface of wall by applying 1 mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) using roller for painting complete all as specified & directed.

M&L for Complete removal of existing treatment plastered old surface and Preparation of wall by applying 1mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade using roller (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)using roller for painting complete all as specified & directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in floors etc. set and jointed in neat cement slurry over and including a 15 mm thick screed bed of cement mortar 1:6 and pointed with white or Coloured cement to match complete all as specified & directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm on vertical surfaces for skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar 1:4 for backing of tiles complete all as specified & directed.

M&L for Granite (of any type) tiles 18-20 mm thick [table rubbed and polished] machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone in as in flooring and landings of stair case, treads including cutting and polishing of tiles and 20 mm thick screed bed of cement morter 1:6 complete all as specified & directed.

All ditto as above but vertical surfaces with 10 mm thick rendering of cement mortar 1:4 complete all as specified & directed.

M&l for rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations complete all as specified & directed.

M&L for sunken slab treatment comprising of the following :-(a) Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work to a distance n.exc. 250mm compete all as specified and directed.(b) 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) over cleaned sunken slab surfaces.(c) Applying bituminous priming coat/tack coat over PCC surfaces @ 0.30 Kg per square metre of surfaces. (d) Applying bitumen grade 85/25 over priming coat @ 1.20 Kg per Square metre. (e) 25mm thick plastering in cement mortar 1:4 using water proofing compound (WPC) @ 3% by weight of cement on wall of sunken floor (f) PCC 1:5:10 type E-2 (using 40mm graded broken brick aggregate) for filling in the sunken portion of slab up to its floor level.(g) S&F 32mm dia GI pipe medium grade, 450 mm long (for draining out the water) complete all as specified & directed. Note: Fill the sunken with water and check for dampness and seepage . All pipes passing through walls of sunken floor shall be laid before water proofing treatment is carried out . One No 50 mm dia, 35 mm long medium grade GI pipe with wire gauge on inside mouth shall be provided to each sunken portion.Cost of pipe shall be inclusive of quoted rate , no extra cost shall be paid.

Taking down rain water pipes including all fittings any size and pattern upto 10th storey floors complete all as specified and directed.

S&F 75 mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 150 mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls as rainwater pipe complete all as specified and directed.

S&F 75 mm dia.,PVC Bends with access door complete all as specified and directed.

S&F for 110 mm dia., PVC Bends with access door complete all as specified and directed.

S&F for 150 mm dia., PVC Bends with access door complete all as specified and directed.

S&F for 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed.

S&F for 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed.

S&F for 75 mm dia.,PVC Bends complete all as specified and directed.

S&F for 110 mm dia., PVC Bends complete all as specified and directed.

S&F for 150 mm dia., PVC Bends complete all as specified and directed.

S&F for 75 mm dia.,PVC Floor trap complete all as specified and directed.

S&F for 110 mm dia., PVC Floor trap complete all as specified and directed.

S&F for 110 mm dia.,vent cowl complete all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and as directed.

Taking up or down steel tubing and connection 20mm bore pipe and removing from site complete all as specified and as directed.

Taking up or down steel tubing and connection 25 mm bore pipe and removing from site complete all as specified and as directed.

S&F for 20mm dia bore CPVC pipe and including all fitting ie elbow, Tee, union , tank nipple ,Coupling,etc fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

S&F for 25mm dia bore CPVC pipe and including all fitting ie elbow, Tee, union , tank nipple ,Coupling,etc fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

Refixing in new or old position steel tubing connections, 15 mm dia in Walls, ceiling, floors complete all as specified and as directed.

Refixing in new or old position steel tubing connections, 20 mm dia in Walls, ceiling, floors complete all as specified and as directed.

Refixing in new or old position steel tubing connections,25 mm dia in Walls, ceiling, floors complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc l0cm girth in brick walls complete all as specified and as directed.

Dismantling PVC water 500 ltr tanks complete all as specified and as directed.

S&F White colour triple layer,1000 ltrs capacity, UV Protective rotational moulded polyethene water storage tank ( cylinderical verticle with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed.

S&F Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 15mm bore complete all as specified and as directed.

S&F Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore complete all as specified and as directed.

S&F Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25mm bore complete all as specified and as directed.

S&F for Corner Glass Shelf, Fancy Type complete all as complete all as specified and as directed.

S&F for 15mm dia fancy type CP 2 way bib cock with wall flanges fixed as in repair complete all as specified and as directed.

S&F in repairs 15 mm bore chromium plated fancy type long body bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs fancy type 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs fancy type 15 mm bore angle stop valves, chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repair angle valve 15mm bore brass chromium plated with captan head screwed for iron pipe complete all as specified and as directed.

S&F in repairs PVC connection 15mm size 450mmlong with CP PTMT nuts complete all as specified and as directed.

S&F for Brass chromium plated tubular towell rail 20 mm dia , D type , 600mm long between flanges fixed with & incl chromium plated brass screws and wooden /plastic cleats complete all as specified and as directed.

S&F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand with Pedestel complete all as specified and directed.

S&F in repairs standard PVC waste pipe 32mm dia.,flexible 1.00 long and complete for WHB complete all as specified and directed.

S&F in repairs standard PVC pipe 40mm dia with all fitting complete for WHB complete all as specified and directed.

S&F for 32 mm dia Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F for 100mm dia stainless steel gratings without hole /with hole of min weight 50 gms complete all as specified and directed.

S&F Wall Mixer for Single lever cast copper alloy, chromium plated HOT and COLD 15 mm dia Fancy type complete all as specified and directed.

S&F Fancy type wall mount SS-304 premium grade stainless steel soap holder/stand size 11.5(l) x 8.5(b) x 5.5(h) cm fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F CP health faucet including one mtr length SS connecting pipe complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs Stainless steel kitchen plate rack of size 750mm x 600mm x 250mm, made of 1mm thick stainless steel sheet complete all as specified and directed.

Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.

M&L10 mm thick cement plaster in cement mortar 1:4 mixed with WPC @ 2 % by weight of cement finised even and smooth without using extra cement on roof surface when concrete is green and wall complete all as specified and directed. Note: WPC shall be measured and paid seperately as supply only rate.

M&L 50mm thick average thickness of PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregates) complete all as specified and directed.

Waterproofing Membrane:- Providing and laying/ fixing TPO membrane of non-flammable waterproofing of roof which shall be a 1.5mm thick loose laid membrane using Fosroc Proofex ORG(I) membrane or equivalent layers are overlapped to achieve a minimum weld of 110mm. Hot air welding can be either hand applied or by means of automatic machines and the rolls either end are overlapped with 110mm are in staggered position and the membrane shell be laid over the layers of nonwoven geotextile fiber or Asian paint TPO or equivalent product of M/s MC Bauchemic/CIPY/SIKA/Pidilite/Dr Fixit/Berger TPO membrane. The separation layer provided to prevent the mechanical abrasion and cushioning between the Fosroc proofex ORG(I) membrane and the concrete substructure.The termination of Foroc Proofex ORG(I) by aluminum strip anchoring complete all as specified and directed. Note:- Work shall be carried out complete as per manufacturers specifications and application methodology . Execution to be done with authorized trained /skilled applicator with prior experience of more than 5 years in applying similar system and as per manufacturer technical guidelines laid by manufacturer,company back gaurantee to be given by contractor after completion of water proofing work before payment.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggragate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work complete all as specified and directed.

Removal of plants/ bushes with roots from wall and concrete surfaces and applying herbicide 2,4-Dichlorophenoxyacetic acid as require and make the disturbed area with PCC (1:2:4), type B0 (Using 12.5 mm graded stone aggregate) or Cement mortar 1:4 complete all as specified and directed.

M&L for Plain Cement Concrete Type B0 , 1:2:4 (using 12.5 mm graded stone aggregate) cast in situ in cills and other similar bands, plinth courses, parapets, copings, hold fast ,bed plates ,filling hollow section of pressed steel frame and the like including use and waste of form work,weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for 75 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) for hard standing including finishing the surface even and fair complete all as specified and directed.

M&L Machine pressed precast conctete glossy finish interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade and pointed with grey cement mixed with pigment to match complete all as specified and directed.

M&L for sand cushioning including watering for Interlocking tiles complete all as specified and as directed.

M&L for coloured designed chequered cement concrete tiles of a size 400x400x25mm thick with white cement & pigment in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M& 15 mm thick Screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) including finishing the surface even and fair complete all as specified and directed.

M&L for PCC type C2 ,1:3:6 (Using 40 mm graded stone aggregate) as in surface channels and drain complete all as specified and directed.

M&L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Forming Contraction (Dummy) joints 75mm deep x 10mm wide,filled with sealing compound, grade 'A' complete all as specified and directed.

Demolition of reinforced concrete of any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition) complete all as specified and directed.

M&L Precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggegrate) as in Chullah hood chajja and manhole cover, kitchen shelves etc set in cement mortar 1:4.including all neccesary formwork & finishing exposed concrete surface complete all as specified and directed.

Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and poining in cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc complete all as specified and directed.

S&F mild steel TMT bars No 500D 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.

All ditto as per item no 135.00 but 6 to 8 mm dia complete all as specified and directed.

M&L 20-22 mm thick machine cut pre-polished kota stone slab flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab over & including 15mm thick screed or bedding in cement mortar 1:6, including grinding, rubbing and polishing complete all as specified and directed.

M&L 20-22 mm thick machine cut pre-polished kota stone slab as in skirting, riser of steps in full length in single piece without joint with groove cutting in double line of stair width, bullnosed ends, laid over and including 10mm thick back coat in cement mortar 1:4 fixed with grey cement slurry, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan,socket or power) complete, including fittings & fixtures such as switches, sockets,ceiling rose, pendants, regulators, light fittings etc. Removing materials to store for keeping in safe custody for taking credit and making good to disturbed surfaces with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed.

Taking down carefully ceiling fan from ceiling, painting of ceiling fans complete, with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and refixing of ceiling fan in same position in serviceable condition including provision of three core 1.5 sq mm copper cable from ceiling rose to fan connector complete all as specified & directed.

Taking down carefully any size/any sweep Exhaust fan from wall, cleaning all dust ,oil etc. and refixing of exhaust fan in same position in serviceable condition including nut ,bolt,washer including provision of three core 1.5 sq mm copper cable from ceiling rose to exhaust fan complete all as specified & directed.

Taking down carefully the electric meters from meter board and servicing/ overhauling of Electric energy meters of any size/ any capacity including testing of meters for running properly and accuracy including load testing with proper equipments and refixing the same including connecting up and provision of cable complete all as specified & directed.

M&L for concealed point wiring with 1.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including PVC rigid concealed conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, round/ square PVC blocks at junction for batten holders, ceiling rose etc ,screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls or any type wall /ceilings /floors etc anodized modular MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly for mounting of modular switches/ sockets/regulator etc and 1.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as continuous earth lead connected to common earth dolly and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed. Note- Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit and modular sunken boxes included in quoted rate. No extra payment shall be be made for this.

One light point controlled by one single pole 5 Amps switch.

One ceiling fan point controlled by one single pole 5 Amps switch.

One exhaust fan point controlled by one single pole 5 Amps switch.

One 5 pin socket point 5 Amps on independent board.

One 5 pin socket point 5 Amps on same board with other switches.

One bell/buzzer point controlled by one push button 5 Amps switch on independent board.

One light point controlled by two 2 - way switches, with cables 1.5 sq. mm size.

All as per item No 144.00 here-in-before but for power point wiring with 2.5 Sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable and 2.5 Sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable as continuous earth lead for 6 pin 15 Amp switch socket outlet on independent board complete all as specified & directed.

M&L for concealed point wiring with 4.00 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including PVC rigid concealed conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, round/ square PVC blocks at junction for batten holders, ceiling rose etc ,screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls or any type wall /ceilings /floors etc anodized modular MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly for mounting of modular switches/ sockets/regulator etc and 4.00 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as continuous earth lead connected to common earth dolly and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc for One 15Amp switch socket combination on independent board complete all as specified & directed. Note- Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit and sunken boxes is included in quoted rate. No extra payment shall be be made for this.

S&F Modular switch , 1 Module single pole one way 10 Amps complete all as specified & directed.

S&F Modular socket , 2 Module 6 Amps, 5 pin, 230 volts AC complete all as specified & directed.

S&F Modular switch , 1 Module single pole one way 16 Amps complete all as specified & directed.

S&F Modular socket , 2 Module 6/16 Amps, 6 pin, 230 volts AC complete all as specified & directed.

S&F Modular switch two way 10 Amps, 1 module 230 volts complete all specified and as directed.

S&F Modular type fan regulator upto 120 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm complete all as specified & directed.

S&F Modular type bell push flush type one way 6 Amp 230 Volt complete all as specified & directed.

S&F Call bell ding dong type 230 Volt single pole complete all as specified & directed.

S&F PVC ceiling rose 65 x 50 mm surface type with 3 terminals 230 volt complete all as specified & directed.

S&F Modular white cover plate with frame, 1 module complete all as specified & directed.

S&F Modular white cover plate with frame, 2 module complete all as specified & directed.

S&F Modular white cover plate with frame, 3 module complete all as specified & directed.

S&F Modular white cover plate with frame, 4 module complete all as specified & directed.

S&F Modular white cover plate with frame, 6 module complete all as specified & directed.

S&F Modular white cover plate with frame, 8 module complete all as specified & directed.

S/&F Modular metal flush box 1/2 module complete all as specified & directed.

S&F Modular metal flush box 3 module complete all as specified & directed.

S&F Modular metal flush box 4 module complete all as specified & directed.

S&F Modular metal flush box 6 module complete all as specified & directed.

S&F Modular metal flush box 8 module complete all as specified & directed.

S&F LED Light fitting, 4 feet 1x20 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

S&F LED mirror Light fitting 2 feet, 10 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

S&F LED light fitting 10 Watts bulk head Luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

S&F LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including connecting up with three core flexible copper conductor cable of 2.5 sqmm size from ceiling rose including street light brackets made out of 50 mm dia light grade GI pipe 1.50 mtr long bent to shape and size as per site requirement for fixing of street light fitting on poles/ walls including Flat Iron clamps=02 Nos of size 30x5mm made to shape incl nuts,bolts & washers complete all as specified & directed.

S&F Sheet metal enclosure for DB's double door SPN, 12 ways when MCBs to be used single pole and neutral, with 200 Amps rated copper bus bar 230 Volt, complete all as specified & directed.

S&F MCB SP, 6-32 Amps, 230V, C- series with breaking capacity of 10KA complete all as specified & directed.

S&F MCB SPN, 40 Amps, 230 V, C- series with breaking capacity of 10 KA complete all as specified & directed.

S&F Sheet metal enclosure for DB's double door TPN 04 ways including 01 No MCCB 125 Amp to be used as incomer and outgoing as MCB single pole, deep drawn with 200 Amps rated copper bus bar 415 V, complete all as specified & directed.

S&F Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating 32 Amps complete all as specified & directed.

S&F Exhaust fan steel body AC single phase 230 V of size 380 mm sweep, 900 RPM with blades, and frame and louvers including making holes in brick/stone wall of suitable size dia for fixing of exhaust fan and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed.

S&F BLDC ceiling fans1200 mm sweep complete with blades, down rods, electronic regulator and accessories, AC single phase 230 V, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and remote to control all the function of fan complete all as specified & directed.

S&F Electric water heater capacity 25 litre, storage type steel body with copper inner tank and heating element upto 2 KW , BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece and including drilling holes in any type wall fixing four nos anchor bolts five inch size,nuts and washer and connected to water pipe line with two nos hot and cold 600 mm long connection pipe and electric connection testing complete all as specified & directed.

M&L Concealed sub main wiring with two single core 2.5 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC rigid concealed conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls /ceilings /floors etc with 2.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed by Engineer-in-Charge. Note- (i) Two runs of single core 2.5 sqmm cable and one run of 2.5 sqmm earth wire including PVC concealed Conduit together shall be measured as one unit. (ii) Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit for sub main wiring included in quoted rate. No extra payment will be made for this.

M&L for concealed sub main wiring with two single core 4 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC rigid concealed conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls /ceilings /floors etc with 4 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed by Engineer-in-Charge. Note- (i) Two run of single core 4sqmm cable and one run 4 sqmm earth wire including PVC concealed Conduit together will be measured as one unit. (ii) Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit for sub main wiring included in quoted rate. No extra payment will be made for this.

M&L for concealed sub main wiring with two single core 6.00 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC rigid concealed conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls /ceilings /floors etc with 6.00 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed. Note- (i) Two runs of single core 6sqmm cable and one run of 6 sqmm earth wire including PVC concealed Conduit together shall be measured as one unit.(ii) Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit for sub main wiring included in quoted rate. No extra payment will be made for this.

M&L for Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground(earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised iron wire 4 mm dia as earth lead up to test point with suitable size GI nuts/bolts, washers,check nut and brazed properly up to main board,LT panel etc and adequate quantity of charcoal and salt 15 cm around the earth plate including earth pit in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates,40mm thick precast RCC cover in 1:2:4 reinforced with 8mm dia TMT bars 3 Nos both way including CI cover 10 mm thick with hinged and frame of angle iron 25x25x6mm with 6mm dia MS bar handle made to shape, excavation and earth work in any type of soil and including medium grade GI watering pipe 20mm bore with funnel and wire mesh and medium grade GI protection pipe 15 mm bore up to main board complete all as shown in electrical plate no 3 of MES schedule Part-I , connected to earthing testing point and testing on completion complete all as specified and directed. Note: (i) The unit rate shall include 15 mm dia GI pipe up to 7.5m for protection of earth lead. (ii) The unit rate shall include galvanised iron wire 4 mm dia from earth electrode to test point up to 7.5 meter (iii) In case measured value of earth resistance of each earthing is recorded more than 3 ohms then the earthing shall be re done by the contractor without any extra cost to the department.

S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing 4 mm dia galvanised iron or steel wire complete all as specified & directed.

Excavation in trenches not. exc. 1.5m wide and not exc. 1.5m deep and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in,including spreading, levelling ,watering and well ramming in layers not exc 25cm thick in soft/loose soil complete all as specified and directed.

Removing surplus soil to a distance not exc 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

M&L for sand cushioning to under ground cable with locally available dry sand for protection of cable 8cm thick before laying of cable and 15 cm thick after laying and stretching the cable below the bricks/PCC cover ,punning of sand using suitable T&P as per site requirement complete all as specified and directed. Note- Punned thickness of sand i.e 18 cm shall be considered for measurement purpose.

Supplying and laying un-reinforced precast concrete cable cover class LV, Type 1, flat, size 250x150x40 mm complete all as specified and directed.

M&L Plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in benching,coping including weathering slightly rounded or chamfered angles or as per site requirement with necessary plastering work complete all as specified and directed.

Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 50 sqmm 3.5 core and connecting up incoming/out going cables connection with suitable size lugs and testing complete all as specified and directed.

M&L Galvanized iron tube light grade 50 mm dia for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc, including Flat Iron clamps=02 Nos of size 50x6mm, with nut, bolt and washers complete all as specified & directed.

M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150mm dia suitable for 0.4mpa working pressure complete all as specified & directed.

ITEMS APPLICABLE FOR JOB 'B'

Taking down shutters of any description exceeding 1 Sq m but not exceeding 2 Sq m each complete all as specified and as directed.

S&F 2nd class H.W plain chowkhats and framed,rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 200 mm alluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and as directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F Mild Steel Fe-290 (Gde E-165) Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

M&L for Welding in repairs exc 2.5 cm but n. exc 5 cm in length thickness of metal to be welded exc 6mm but n exc 9mm and over cut to length bent to shape as required all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame Sqm including punching or drilling out old glazing pins/spring clips and providing and fixing new ones

S&F in 4 mm thick sheet glass ordinary quantity and glazing with oil putty in squares not Sqm exceeding 0.50 sqm in each pane complete all as specified and as directed.

S & F 100mm mild steel butt hinges, medium weight, cold rolled complete all as specified and as directed.

M&L for preparing new plastered surfaces and applying three coats of white wash on surfaces of ceiling complete all as specified and as directed.

M&L for preparing old plastered surfaces and applying two coats of white wash on surfaces of ceiling complete all as specified and as directed.

M&L for preparing new plastered surfaces and applying through mechanical meanstwo coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and as directed.

M&L for preparing old plastered surfaces and applying one coats of cement base paint through mechanical means complete all as specified and as directed.

M&L for preparing new plastered surfaces of walls and applying through mechanical means two coats of oil bound distemper over a coat of alkali resistant primer over and including applying 2 mm thickness putty to prepare the surface even and smooth complete all as specified and as directed.

M&L for Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and as directed.

M&L Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, with trap set and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and as directed.

M&L Preparation of old chequered tiles and paver block surfaces/existing footpath, hard standing by removing all the caked mud with wire brushes and cleaning surfaces with necessary acid and description not otherwise described and applying one coat of weather proof tile guard apex paint or equivalent of any colour complete all as specified and directed.

All as per Sl item No 212.00 here-in -before but two coats of weather proof tile guard apex paint or equivalent of any colour complete all as specified and directed.

S&F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts as reqd complete all as specified and as directed.

S&F Prepainted galvalume aluminium zinc coating GI based plain steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts as reqd and complete all as specified and as directed.

EURO ENTERPRISES (BID ID -3408758)