A/R M/O in HPPWD Division and Sub Division Office Building at Kumarsain

Amount

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth in all leads and lifts as per direction of the Engineer-in-Charge.

Providing and laying cement concrete 1:4:8 (1 cement :4 sand : 8 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth i including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws 30mm thick second class deodar wood including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :20 mm dia (heavy type) including entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.

Providing and fixing 6mm (six milimetre) thick water proof plywood lining with butt jointing and nails (back side of cupboards) with necessary screws and adhesive complete as per HPPWD specification 1990 volume-I. including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing and fixing square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete Ist class Indian teak wood including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing and fixing 1.00mm thick coloured or plain lamination sheet(sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete) including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete:-Triple strip vertical type including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :100 mm including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete:-60mm thick including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Chequerred precast cement concrete tiles 22 mm thick in footpath & ourtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Repairs to plaster in patches of 2.50 Sq.M. and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Melamine polishing on wood work (one or more coat) including entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:-Two or more coats including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:-New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :470x420 mm bowl depth 178 including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete:-32 mm dia including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete;-including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge:-15 mm nominal bore

20 mm nominal bore

Providing and fixing C.P. Brass bib tap with capstan head 15mm dia including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid including entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.

Providing and fixing C.P. Brass waste for wash basin or sink :-32mm dia including entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.

Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws including entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.

Providing and fixing 600mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers including entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.

Providing and fixing C.P Brass pillar tap with Capstan head:- 15mm dia including entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required including entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.

Providing and fixing vitreous China wash down, water closet (European type W.C pan/ Indian type WC pan) with integral P or S trap if required including jointing the trap with soil pipe in cement pipe in C.M. 1:1 (1 cement : 1 sand ) ( seat and cover to be measured and paid for separately ) European seat :-No, 20049 of HINDWARE in white shade including entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.

Providing and fixing PTMT jet spray of approved quality and colour with one metre tube including entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.

Providing and fixing curtain for windows 0.90 x 2.7 m.height including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.(MR)

KAMESH ROHAL

SUMIT VERMA