Construction of See Through Fence at KGC Srinagar

Amount

Part A : CIVIL WORKS Dismantling of old chain link fencing incl. structural work stacking of serviceable material and disposal of un-serviceable material within the lead of 300mts

Earthwork in excavation in hard/soft soil with the disposal lead of 30mts incl. dressing of sides and ramming of bottom.

P/L of hand packed soling of boulders incl. all types of carriage and head loads.

P/L in position cement concrete of sp. Grade incl. curing but excl. the cost of centering &shuttering. All works upto plinth level incl. all types of carriages & head loads 1:4:8 graded crushed stone Agg 40mm n/size

P/L in position cement concrete of sp. Grade incl. curing but excl. the cost of centering &shuttering. All works upto plinth level incl. all types of carriages & head loads 1:2:4 graded crushed stone Agg 20mm n/size

P/L in position sp. Grade of R.C.C incl. curing but excl. the cost of centering / shuttering & reinforcement. All works upto plinth level incl. all types of carriages & head loads 1:1.5:3 graded crushed stone Agg 20mm n/size

P/F of verinag dressed stone masonry uncoursed (Semi fine Chiseled on both sides of walls) in cement sand Mortor 1:6 mix in walls with width of 450mm incl. farming of groves of size 10x10mm by using of wooden battens & Groved pointing complete job incl. all carriage and head loads.

P/F of ornamental type Grill work welded in built-up section in MS square bars with ornamental fancy pattern incl. applying of priming coat of steel priming & two coats of sy. Enamel paint of desired shade and carriage complete.

Form work incl. centering shuttering probing etc of Kit Ply.

P/F of Devri Stone on top of the Pillar 4” thick fine chiseled with ornamental edges fixed in 1:6 mix sand motor design as per sample.

Tile brick work 5cm thick with common burnt clay non modular tile brick of class designation 10 in cement mortar 1:3 & curing complete incl. farming of groves of 10x10mm by using wooden battens and putting the lime surkhi pointing in joints.

Providing and Fixing of 6 rows of barbed wire &concertina wire circular row over the y-shaped angle iron over the boundary wall incl. applying of priming coat & two coats of sy. Enamel paint on angle iron (Y-Shaped angle iron is already existing on boundary wall) complete job

PART B: ELECTRICAL WORKS: P/L of 16 sqmm cable 2 core Aluminium conductor, PVC sheathed and XLPE insulated armoured, 1100 volts grade,cable through HDPE pipe.

S/L OF 35 mm HDPE pipe including trenching 2’ deep 1’ wide, backfilling and making good any damages caused to paths, road cuts etc

P/F of junction boxes outdoor type, weather proof with connectors and provision of cable entry at bottom besides having MCB protection 5 A and mounting arrangement.

Supply and laying of 1" PVC Conduit with bends, Tees etc inside fencing pillars/underground as per site requirement (Make: Finolex/Polycab/ or equivalent)

Supply and laying of 1.5 sqmm , PVC insulated, multistranded, FRLS copper wire (Make: Havells/Polycab/RR)

SITC of Automatic Control Panel for fencing lights housing astronomical timer, contactor, 63 Amp DP MCB, Indicators, connectors for incoming and outgoing cable, 15 kW load capacity, IP 65/66 protection

SITC of Antique design Gate lamps on fencing pillars. Specification of lamps:- i. Material: Metal ii. Style: Antique iii. Color: Brown iv. Inbuilt B22 holder v. Dimensions: 20x15x15 cm Design to be approved by site incharge before installation.

SITC of 12 Watt LED Bulb in gate lamps (Havells/Philips or equivalent)

M/S MEHBOOB-UL -ALAM CONSTRUCTIONS

M/S SAJAD AHMAD KHAN

M/S ALI MOHMAD HAZARI

FIRDOUS AHMAD MIR

GULZAR AHMAD SHEIKH

M/S DAR CONSTRUCTIONS