Bifurcation and 11 KV Lucknow Road Feeder and other electrical work against System Strengthening works in Municipal area 2023-24 (Package No. 477/23-24) under jurisdiction of EDD, CESS-I, Ciss Gomti, Lessa, Lucknow

Amount

Safe carriage, loading and unloading of following material from ESC Daliganj Lucknow in work site J.E. dump store

(a) Line Material

(b) 11 KV 3x120 sq.mm XLPE cable

(c) 11 KV 3x120 sq.mm XLPE OD CJ Kit

(d) LT PVC Cable 1x240 sq.mm.

(e) ST Pole 11 Mtr. Long

(f) 11 KV Pin Insulator

(g) 11 KV Pin with nut

(h) 11 KV Disc Insulator

(i) Disk fitting

(j) 11 KV VCB for OG CTR 200/100/5A 350 MVA

(k) Stay Set complete

(l) 11 KV 3x120 sq.mm. ST

Fabrication, erection of double pole for end terminations/sectional double pole, 11 KV line on ST Pole with fixing of necessary clamps & other accessories like 1 nos top channel 100x50 mm 2.24 m. 1 No. Guarding Angle. Its grouting in ratio 1:4:8 plinthing 300 mm above ground level, earthing of support & one side cable expose.

Dragging of ST/PCC Pole to pit site, diging of pit erection and grouting (As per RESPO Norms) of 11 KV 11/8.5 Mtr Long ST/PCC Pole with, fixing of necessary item, such as V-type X-arm, F-bracket, 11 KV Pin insulator, Gaurding angle (1.8 mm 65x65x6) with Nut & bolts its ramming as per RESSPO Specification. Only Pole and insulator will be Provided by the Department.

Grouting & Nuzzling of stay set complete including fixing of necessary clamps. Accessories required including its grouting by civil material (Sand, Brick blast & cement). All material except stay wire shall be supplied by the contractor.

Ordinary earthing by MS earth Rod 2500mm long as per RESPO Schedule. All material exept earthing wire shall be supplied by the contractor.

Laying of 11 KV 3x120 sq. mm XLPE cable double circuit digging of trench 1050 mm deep, 750 mm side including supply of required material, 1st class bricks, stone pad & fine sand. The inter spacing between two cable should be in between 0.25 m to 0.40m. The cables shall be laid in trench by first filling layer of sand and laying on sides with bricks, fixing bricks as partitions between two cables, after laying cable, covering cable by stone pads resting on bricks, covering it by earth, all work as per RESPO norms. (All material required for laying will be supplied by the contractor except 11 KV XLPE cable). One length cable-2400 Mtr total length 4800 Mtr.).

Cable Hosting of 11 KV 3x120 sq. mm XLPE Cable at the following including jumpering etc complete with help of GI Pipe as Per RESPO Norms. GI pipe and other required material shall be supplied by contractor.

High pressure testing of 11 KV 3x120 XLPE cable along with arrangement of High Pressure equipment.

Well type earthing of with 60 Fit Deep borring and providing GI Pipe 1.5" dia ("B" Class) and earthing must be joint by G.I. Strip of 32x5 mm thick long attached with nut & bolts and GI pipe cap. All material and labour shall be supplied the contractor.

Commissioning of 11 KV VCB IC CTR 200/100/5A 350 MVA Volt at 33/11 KV S/S including connection with, Busbar its Empire tap, PVC tap after grouting 2 No. Channel 75x40 mm 0.90 M lag its commissioning after taking proper S/D. Only 11 KV VCB shall be supplied by the Deptt.

GST Extra as per Rules

M/S MAA VINDHYAVASINI ENTERPRISES

SANA ELECTRICALS