Tender ID

CPPP

Technical Eval

Works

Civil Works

Augmentation of water supply system at campus Mawpat under SHQ BSF Shillong

DG,BSF,MHA

Campus Mawpat under SHQ BSF Shillong | East Khasi Hills, Meghalaya

Amount: ₹12.0 LCloses: 16 Apr 2026Closed

Timeline

Published9 Apr 2026
Closed16 Apr 2026
Technical Evaluation28 Apr 2026
Award—

Bids

2 Bids28 Apr 2026

#	Company	Status
1	Habil hussain barbhuiya Accepted-Technical	Accepted-Technical Technical bid checked by BOO and found in order
2	M/S Hussain and Bros Accepted-Technical	Accepted-Technical Technical bid checked by BOO and found in order

Tender Value

₹12.0 L

EMD Value

₹23,952

Closing Date

16 Apr 2026, 11:00 amClosed

Tender Inviting Organisation

Name

DC(Works) , Ftr HQ BSF Meghalaya

Address

DC(Works) , Ftr HQ BSF Meghalaya

Work Description

Augmentation of water supply system at campus Mawpat under SHQ BSF Shillong

Tender Information

Tender ID

2026_BSF_905026_1

Reference Number

134/BSF/FTR/MEGH/2026-27

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Works

Period of Work

120 days

Location

Campus Mawpat under SHQ BSF Shillong

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per NIT

Documents Required

12 documents required · 12 mandatory

Fee/PreQual/Technical

RequiredScanned copy of enlistment certificate as per NIT (.pdf)

RequiredScanned copy of original EMD as per NIT (.pdf)

RequiredScanned copy of receipt of deposition EMD as per NIT (.pdf)

RequiredScanned copy of contact details of firm on his own letter head as per NIT (.pdf)

RequiredScanned copy of GST state meghalaya if dont have then undertaking as per NIT SB.e P/nO 7 (.pdf)

RequiredScanned copy of PAN Card (.pdf)

RequiredScanned copy of similar nature work experiance as per NIT (.pdf)

RequiredScanned copy of affadavit on 100 rs as per NIT P.no 7 sub para i (.pdf)

RequiredScanned copy of site awareness certificate as per NIT P.no.7 sub para j (.pdf)

RequiredScanned copy of EPF and ESIC Registration as per NIT (.pdf)

RequiredScanned copy of affadvit for not blacklisted as per NIT PNO 7 sub para l (.pdf)

Finance

RequiredBOQ as per given format (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹23,952

Important Dates

Last Activity

28 Apr 2026

Published

9 Apr 2026

Bid Opening

17 Apr 2026

Download Starts

9 Apr 2026

Download Ends

16 Apr 2026

Submission Starts

9 Apr 2026

Clarification Period

9 Apr 2026 - 16 Apr 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (12 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :15 mm to 40 mm nominal bore	-	Metre	-	-
2	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes	-	Metre	-	-
3	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal dia Pipes	-	Metre	-	-
4	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50 mm nominal dia Pipes	-	Metre	-	-
5	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 80 mm nominal dia Pipes	-	Metre	-	-
6	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore	-	each	-	-
7	Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reinforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5	-	each	-	-
8	Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5	-	each	-	-
9	Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5	-	each	-	-
10	Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :25 mm diameter pipe	-	metre	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.38 MB

Work Item Documents

BOQ_951267.xls

BOQ • 0.34 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

Habil hussain barbhuiya

Accepted-Technical

M/S Hussain and Bros

Accepted-Technical

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :15 mm to 40 mm nominal bore

Metre

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes

Metre

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal dia Pipes

Metre

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore

each

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reinforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

each

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

each

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

each

Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :25 mm diameter pipe

metre