CWEK-19/2024-25 PROVN OF SPECIAL REPAIR OF HARDSTANDING AND PATH AND ROAD AND DRAIN AT CSD DEPOT SRINAGAR UNDER GE 864 EWS

Amount

Material and labour for preparation of black top surface and unsurfaced WBM by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc, complete all as specified and as directed by Engineer -in-Charge.

Material and labour for applying evenly a priming/tack coat with bituminous primer of GRADE VG-10 @ of 5 KG per 10 SQM using paving bitumen complete all as specified and as directed by Engineer -in-Charge.

Material and labour for applying evenly a priming/tack coat with bituminous primer of GRADE VG-10 @ of 3 KG per 10 SQM using paving bitumen complete all as specified and as directed by Engineer -in-Charge.

Material and labour for laying bituminous premix semi dense asphaltic concrete 30mm (consolidated thickness) using with 5.5% of binder content (grade VG-30) by weight of total mix, rolled and compacted to required camber and gradient using self propelled mechanical paver and rolled with 8 to12 tonne capacity vibratory road roller rolled to uniform smooth surface ,complete all as specified and as directed by Engineer -in-Charge. Note- (i) Bituminous premix semi dense asphaltic concrete shall prepared in central computerised hot mix plant. complete all as specified and as directed by the Engineer-in-Charge. (ii) Design mix shall be got done by the contractor at his own expenses from laboratory and got approved from GE before commencement of work. complete all as specified and as directed by Engineer -in-Charge.

Material and Labour for premixed bituminous macadam (consolidated thickness 75mm or less ) laid / rolled and compacted to required gradient and camber required by using power roller 8 to 12 Tonne capacity , using binder content of 4% by weight of total mix using paving bitumen of grade VG-30, complete all as specified and as directed. Note- (i) Bituminous premix macadam prepared in central computerised hot mix plant. complete all as specified and as directed by the Engineer-in-Charge. (ii) Design mix shall be got done by the contractor at his own expenses from laboratory and got approved from GE before commencement of work ,complete all as specified and as directed by Engineer -in-Charge.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved color, design & pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern finishing and sweeping extra sand complete all as specified and as directed by Engineer-in-Charge.

Providing cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in lintels upto 1.5m clear span, cills,steps,and other similar bands,plinth courses, string courses, lacing courses, parapets and railing upto 60cm height,copings,kneelers,apex stone,bed plates and the like including weathering slightly rounded or chamfered angles and throating, complete all as specified and directed by Engineer-in- Charge.

Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in- Charge.

M&L for Rendering 15mm thick in cement mortar 1:4 on fair face of brickwork or concrete surfaces,stone masonry surface, finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete 1:2:4 type B-0 (12.5 mm graded aggregate) cement concrete in surface channels and drains extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds mi-tred/stopped ends etc complete all as specified and directed by Engr-in-Charge.

Framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars barred iron doors, ladders, framed balusssters, walk ways, railings, framework of water and similar work conforming to Fe 290. Gde-E-165 etc complete all as specified and directed by Engr-in-Charge.

M/S BASHIR AND SONS

M/S Vivek Gupta and Co