Construction of Ramp and Ladies Toilet at Various offices Sirohi (R/W).

Earth work in exacavation by mechanical means(hydraulic excavator)/ manual means in foundation trenches or drains including dresing of sides and ramming of bottoms, lift up to 1.5 Mtr.. Including taking out the excavated soil and depositing and refilling or jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soil (B-2/1.8)

Providing and laying in position cement cocrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size(crusher broken). (B-16/3.2.8)

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 CM thick wall in : cement Mortar 1:6: (1 Cement : 6 Sand). (B-40/6.1.7)

Random Rubble stone masonry for superstructure in: Cement Sand Mortar 1:6 for up to 30 CM thick wall in (B-40/6.2.7+6.3.2)

Supplying and fixing rough dressed stone sills, dassa, coping, cornices sriwan, string courses etc. in cement mortar 1:4 including pointing with admixture of pigment matching with the stone shade :100 mm/6.14.3

Supplying and fixing Jodhpur Bhura or Equivalent whiter ashlar sills, lintels and dassa, bearing, bed & top surface made perfenctly even, jambs, skirting steps etc. rough dressed:Upto 15 cm. thickWhite Ashlar (B-58/6.27.1)

Stone slab roofing on ground floor with fine grained stone slab approved quarry with 150 mm top lime terracing with Hemp, Methi,Lime,Sanlawith Gur& Gugal (as per JODHPUR PRACTICE ) including ralthal,filling of joints of parapet and slab on both sides in cement sand mortar 1:4 lime batta (gola ) 75mmx75mm sandla and ceiling plaster in CM 1:4 with wire and nails etc complete as per specification for span . above 2.50 mtr upto 3.30 mtr deduct 150 mm thick avg. lime terracing on foof of ground floor including lime batta (75 mm) and sandal come.(10.1.1-10.3-10.4-10.5.1)

Providing and laying cement concrete mix 1:3:6 including curing, compaction etc. complete using stone aggregate 20mm nominal size in super structure upto floor 3 level excl. cost of centering and shuttering (3.2.4+3.4.(I)

Providing and laying 20 to 25 mm Size glazed tiles pieces over roofs treatment having colour and shades appd by Engg Incharge over 25 mm thick under layer in cement sand mrotar 1:4 with app of cement sullery I/e finishing of joints withordinary cement with pigment to metching the shades, curring ets comp in all respect and washing with acid (10.50)

Supplying and fixing 30 to 40 mm thick stone chajjas in cement sand mortar 1;4 including making gola at junction with wall in cement concrete M-15 grade drip course ;20mm thick plastering in CM 1;6 on both faces[6.18.2]

Supplying and fixing in walls machine cut and polished stone shelves, tands and sills in CM 1:3 with machine cut edges: Kota stone 25 to 30 mm thick. (6.16.4)

Providing & fixing steel glazed doors, windows and ventilators shutters of standred rolled steel section joint mitred and welded with steel 13x3mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of plain glass panes 4mm thick with copper glazing clips and special metal-sash putty of approved make, or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and other fittings except necessary hinges of pivots steel handles and peg stay etc. as required. IS 1038-1983.windows side hung (openable)(B-115/9.28.3)

Supplying and fixing fixed wire gauge of 14 mesh X 24 gauge to the metal frame of rolled section by metal beading 20x3 mm with suitable screw at not exceeding 150mm distance. (B-116/9.31)

Providing and fixing Square bars or other flat welded to window, ventilatiors etc. (B-116/9.32)

Plaster on new surface on walls in cement sand moprtar 1:6 including racking of joint etc. complete fine finished: 25 mm thick. (B-175/12.9.1)

( B ) 6 mm cement plaster to ceiling of mix1:3 (12.22)

Providing & fixing precast cement concrete copying 1:2:4 mis 50mm thick complete as per specification : -- 50mm -- (B-208/15.6.1)

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10 cm long embedded in cement concrete bl,ocks 15x10x10 cm of 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) or with wooden plugs and screws or rawl plugs and screws or with fixing clups or with bolts and nuts as require including fixing or necessary butt hinges and screws and applying a priming coast of approval steel primer. (B-111/9.13)

P/F extranal grade board solid core single leaf flush door shutter ISI 2202 -67 marked using phenol formal,dehydreresin in glue both sides with appd steel fitting comp as per annx-A, IS -2202 (Part I &II) 1999/1983, 30 mm thick shutter Commercial veneer both side (B-95/8.18.2)

Polished other than Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete :For area of each slab up to 2001 to 5000 Sq. Cm 30 mm thick slab(B-162/11.35.3b-11.37.4) :

Polished other than Blue Kota stone slab in steps, walls pillars having fine machine cut edges laid on 12 mm (Av.) thick cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the polishing complete 30 mm thick slab area 2001 sq. Cm.to5000 (B-163/11.37.3 - 11.37.4)

P&F I st quality std white ivory glazed tile ISI mark of size 300 mmx200 mm in wall floor steps pillers etc laid on base of neat cement slurry finishing with flush pointing in white cement mix with pegmentl to match the sheade of the tile complete cat 1st Kagariya, Jhonson,Orient, Somani make. (B-71/7.3(A))

Providing & Fixing 1st quality MAT Finished Ceramic Tiles of approved make & size 300 x300 mm confirming to IS : 13753 colour such as white,grey,ivory,fume red brown in walls,floor,steps,pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder(Unitile or Roffe make) & finishing with flush pointing in white cement mixed with pigment to match the shade of tile completeFloor work cement morar1:4 (1-cement:4-fine sand) 20 mm thick (B-71-72/7.4+ Note-1)

P&F steel gate grating & grills made of angle, tee, square bar or other flates black pipe with holdfast and fittings completes as per design and drawing including cutting welding and fabrication with priming coat of red oxide (9.19)

Providing & laying Chequerred coloured cement concrete embossed of specially manufactured non slipping tiles of approved make 20 mm thick laid on 20 mm thick bed of cement mortar 1:6 jointed with neat cement slurry complete. (B-132/11.33+11.34)

White washing with whiting to give an even shade including all scafforlding: New work (three or more coats): (B-181/12.46.1)

Painting with weather coat paint (Asin paint/ I.C.I./Berger or eq. ISI make paint) two or more coat to give an even shade on new work. /12.88

Painting with enamel paint of apprived brand and manufacture to give an even shade: Two or more coats on new work. (B-186/12.68.1)

P & F and fixing 1 mm thick M.S. sheet garrage door shutters with frame of 40x40 x 6 mm. Angle iron 3 mm M.S. gusset plates at the junction and corners including all fitting and applying a coat of approved steel primer. (Excluding cost of frames) Using flats 30x6mm for diagonal braces and central cross piece. (B-113/9.22.3)

Half brick masonary in S/S using bicks of disignation 75 with nominal hoop rainforsed (2 nos. 6mm MS bar) at every fourth course in for hoop rainforcement 1Sqm. 6mm M in CM 1:6 (B-36/5.8.4+5.9)

Providing stone slab covering over drains including filling of joints in cement sand mortar 1:3 with 35 mm thick cement concrete flooring 1:2:4 mix complete with good finish with: Stone slab 60 to 75 mm thick average. (10.14.2)

Providing batta (gola) 75 mmx75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design (10.8)

Finishing with neat cement (Punning)./12.15

P & F Indian type white glazed vitreous china 1st quality W.C. Orissa pan (I.S.: 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor : (S-1/1.2.2)Size 580 x 440 mm.

P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (I.S.: 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25mm G.I. waste pipe complete including cutting & making good the wall :Size 510mm X 440mm (S-6/1.39.2)

P&F G.I. pipes (Internal work) with G.I. fittings (I.S.: 1239 Mark) & MS clamps, including cutting and making good the walls and floors :B class exposed on wall a)15 mm dia nominal bore(2.1.1)

P&F G.I. pipes (Internal work) with G.I. fittings (I.S.: 1239 Mark) & MS clamps, including cutting and making good the walls and floors :B class exposed on wallb) 25 mm dia nominal bore (S-16/2.1.1&2.1.3)

P & F G.I. pipes (Extranal Work) with G.I. fittings (IS: 1239 Mark) including trenching and refilling earth etc B class and floors: 15 mm dia nominal bore (S-16/2.2.1)

P& F Bib Cock (IS : 8931 Mark), Superior quality of approved make a) Brass bib cock 400gm 15 mm nominal bore (S-18/2.7.1)

P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc.(S-19/2.12.1)C.P. Inlet connection 15 mm Brass (IS:8931 marked).

P & F 15 mm dia connection Pipe of approved quality / Make :PVC pipe with nuts 450mm (S-20/2.13.3)

P & F Flush Cock/Flush Valve (IS: 9758 Mark) for WC of approved quality make:Brass/Gun metal Half-turn wt. 1 kg of approved quality / make 25 mm.(S-21/ 2.14.9)

P & F Full-way valve (IS :778 Mark) or wheel valve of approved make (b) Gun-metal 25mm (S-21/2.15.1&2.15.3)

P & F Full-way valve (IS :778 Mark) or wheel valve of approved make :(a) Gun-metal 15mm (2.15.1)

P&F storage tank confirming to IS(12701/89) standards of approved make with cover, 25mm dia 1M long G.I. over-flow pipe and 25cm long wash out pipe with plug and socket, including making connec- tion etc. complete of approved design.500 Ltr capacity. (S-24/2.26.3)

Providing & Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592:1992 Marked) of approved quality/make including jointing of pipes complete (S-48/3.45.1)a) 75mm dia

Providing & Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592:1992 Marked) of approved quality/make including jointing of pipes complete (S-48/3.45.1b) 110 mm dia (S-48/3.45.2)

Providing & Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipe Fittings Type B for sciland waste discharge system (IS:13592:1992 Marked) of approved quality/make 110 mm dia.(S-48/3.46)SingleTee with door 110mm dia

Providing & Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipe Fittings Type B for sciland waste discharge system (IS:13592:1992 Marked) of approved quality/make 110 mm dia.(S-48/3.46)Band 87.5 110mm dia

Providing & Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipe Fittings Type B for sciland waste discharge system (IS:13592:1992 Marked) of approved quality/make 110 mm dia.(S-48/3.46.30)Vent Cowel 110mm dia

Construction of manhole in all type of soil inner size 90x60 cm. thick masonary in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring making channels, 80mm thick stone slab covering with 40 mm thick M-15 grade C.C. flooring, RCC cover with frame of 400mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50mtr. lead. Depth up to 0.5 M (3.21.1+3.35.2-3.33)

Construction of soakage well in all type of soil 300mm thick dry masonry, top and bottom 300mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1:3, Ralthal, Kharanja, 40mm thick M-15 grade C.C. flooring, earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr. : Size 240 cm. dia outside & 240 Cm. depth . (S-41/3.24.3)

Making connection to G I main to Distibution i/c all fitting upto 25 mm dia (S-17 2.3.1)

P&F Looking Mirrors with P.V.C. frame of approved (Atul/equivalent) (S-9/1.48.1)Size 500X400mm

Providing and fixing Towel rail of ring of approved quality/ make )(B)C.P.brass towel ring revolving type.(1.50.8 )

Construction of Cement Concrete Chamber with 125mm dia.Stainless Steel Sheet grating (S-46/3.40.4)

P & F Ist quality WVC Urinal (IS:2556 mark) with 25 mm dia G.I. waste pipe, dome couplings, concealed iron brackets or screws etc. complete.Flat Back (small) size 440x265x315 mm./1.15.1

Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 K V grade (IS 694) of approved make in surface/recessed ISI marked MMS (IS:9537 P-III) PVC conduit & it's accessories, round tiles, 18 S.W.G. M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point, 6A switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated/ brass screws, cup washers, making connections, testing etc. as required. a) Short point (Upto 3 Mtr.)(E020101)(E020100)GROUP- 2

Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 K V grade (IS 694) of approved make in surface/recessed ISI marked MMS (IS:9537 P-III) PVC conduit & it's accessories, round tiles, 18 S.W.G. M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point, 6A switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated/ brass screws, cup washers, making connections, testing etc. as required.b) Medium point (Upto 6 Mtr.)(E020102)

Wiring of 3 pin 5 Amp. light plug point with 1.5 sq mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 K V grade (IS 694) of approved make in surface/ recessed ISI marked MMS (IS:9537 P-III) PVC conduit & it's accessories, 18 SWG 175x100x60 mm M.S. box with earthing terminal, screwless cage connectors for neutral looping in switch board, 6 A switch, 6 A socket, 3.0 mm thick ISI marked phenolic laminated sheet , zinc plated/ brass screws, cup washers, making connections, testing etc. as required. On Board (E020301) GROUP- 2.

Supplying & drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694 ) of 1.1 KV grade of approved make in existing surface or recessed conduit/ casing capping including making connections etc. as required(E040100)(a) 2x4+1x2.5 Sq.mm. (E040102) Group-2

Supplying & drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694 ) of 1.1 KV grade of approved make in existing surface or recessed conduit/ casing capping including making connections etc. as required(E040100)(b) 2x2.5 Sq.mm. + 1x1.5 Sq.mm. (E040108)

Suppling & Fixing of power plug point accessories on18 SWG metal box of size 175x100x60 mm on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch & Socket outlet, making connection etc. as required. Group-2. ( E 040500).

SITC of ISI mark (IS:8472) self priming monoblock pump set of approved make. TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 1440/1500 RPM, single phase (180 to 240 V) including cost of harware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively. 1.0/1.1 HP, 1-0 (10-50) Mtr. (53-6.5) LPM (E260814) Group -1