GE 861 EWS-62/2021-2022

Amount

Demolition of Plain Cement Concrete in ground floor and paving not exc 15cm thick (below or above) ground level complete all as spd & directed by Engr-in-Charge.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base under flooring of path/hardstanding etc complete all as specified and directed.

M&L for providing 60 mm thick factory made machine pressed precast concrete interlocking coloured tiles with grey cement and pigment of any shape and size confirming to IS 15658-2006, of grade M-35 (compressive strength) of mixed colour including 25mm thick sand cushinoning complete all as specified .

M&L PCC (1;2:4) type B-1 using 20mm graded stone agregete as in sides of rounded or chamfered on edges of interlocking tiles including necessary formwork complete all as spd & directed.

Demolition of brick/ stone masonary work built in cement mortar including in all quoins etc and precast concrete articles complete all as spd & directed. Note : The work is to be carried out upto 10 mtr height.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 Mtr mean radius built in cement mortar 1:6 complete all as spd & directed. Note : The work is to be carried out upto 10 mtr height.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as spd & directed. Note : The work is to be carried out upto 10 mtr height.

M&L for rendering 15 mm thick on fair faces of brick work or concrete/roof surfaces in cement mortar 1:4 mixed with water proofing compound finished even and and smooth without using extra cement complete all as spd & directed. (Water proofing compound shall be measured separately.) Note : The work is to be carried out upto 10 mtr height.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 mixed with water proofing compound finished even and and smooth without using extra cement complete all as spd & directed.

Supply only Integral water proofing compound complete all as spd & directed

M & L preparation of new plastered surfaces of wall and applying two coats of cement base paint in camoflague pattern over one coat of alkali resistant primer complete all as spd & directed. Note : The work is to be carried out upto 10 mtr height.

M & L preparation of new plastered surfaces of wall and applying two coats of cement base paint over one coat of alkali resistant primer complete all as spd & directed.

Dismantling of plain or corrugated steel/aluminium sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings/fixed in crumple complete all as spd & directed. Note : The work is to be carried out upto 10 mtr height.

S&F 0.56 mm Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) in crumple joint complete all as spd & directed. Note : The work is to be carried out upto 10 mtr height.

M& L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as spd & directed. Note: The work is to be carried out upto 10 mtr height.

M&L PCC (1;2:4) type B-1 using 20mm graded stone agregete , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as spd & directed.

S & F of 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugated side lap fixed with L type or J type hook bolts in roofs, walls etc. upto height of 10-12 m with grade of zinc coating 275, complete all as spd & directed.

S & F of 0.80 mm thick plain galvanised mild steel sheeting in ridge with grade of zinc coating 275,upto height of 10-12 m complete all as spd & directed by Engr-in-Charge.

S&F for galvalume aluminium zinc coating GI based pre-painted corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall, fixed with self tapping screws as specified and directed.

M & L for preparation of new steel surface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as spd & directed.

M & L for preparation of old painted steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as spd & directed.

M&L for Lagging to 15 mm pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as spd & directed.

M&L for Lagging to 20 mm pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as spd & directed.

Taking down 15 mm dia steel water tubing and connections including cleaning for re-fixing complete all as spd & directed.

Taking down 20 mm dia steel tubing and connections including cleaning for re-fixing complete all as spd & directed.

S & F of 15 mm dia mild steel water tube medium graded galvanised with all fitting and fixed complete, concealed to walls and ceiling or laid in floor complete all as spd & directed.

S & F of 20 mm dia mild steel tube medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floor complete all as spd & directed.

S & F in repair 15mm dia pillar taps, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered 'Hot' and 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repair 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repair water closet vitreous china squatting pan, Orissa pattern size 580mm x 440mm white with integral foot rests including provision of lime concrete bedding with `P' trap and connection to drain and to flushing pipe anti syphonage pipe (excluding flushing cistern) complete all as specified.

S & F in repair for 125mm size chromium plated shower rose with or without swivel joints, any size including fixing to steel pipe or union of 15mm dia fixed in repair complete all as specified.

S & F in repair PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S & F in repair vitreous china wash basin flat back size 550mmx400 mm excluding taps, waste chain, porcelain stopper and plug but including brackets complete all as specified.

S&F in repair PVC valve less 10 litre capacity symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

S & F in repair 15 mm bore bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down screwed for iron pipe for brass ferruel complete all as specified and directed.

S & F in repair 15 mm stop valves cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe or for union.

Fixing only of 20 mm dia old steel tubing in new or old position with new fittings complete all as spd & directed.

Dismantling of board of any description fixed in any position with nails, complete all as spd & directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet

Taking down chowkats with shutters (without taking off shutters from frames) area not exc 1.5 Sqm each complete all as specified.

35 mm thick, 2nd class hard wood factory made, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneers on both faces. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified and directed.

S&F for 30 mm thick 2nd class hard wood (Sal/Hollock) glazed and skeleton windows/ventilators shutters open rebated and prepared to receive glass, gauge etc , divide into square with plain chamfered or rounded, mitered and rebated sash bars any numbers , provided with stiles and rails as specified in SSR part I section 8 clause 8.24 (b) complete all as specified.

Taking down chowkhat or frame with shutters (without taking shutter from the frame) exceeding 1.5sqm and not exceeding 4.00 sqm each complete all as specified and directed

Supply and fixed 35mm thick 2nd class hard wood(Sal/Hollock) glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc (internal sash bars) edges of framing plane, chamfered or rounded fitted and mitered beads for securing glass etc size of members as specified in SSR Part-I Section 8 clause 8.24(a) complete all as specified.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.

S & F in repair 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square n.exc 0.5 sqm each pane complete all as specified.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staple complete all as specified.

M&L 2nd class hard wood, plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified.

S&F aluminium anodised barrel tower bolts extruded section of size 200 mm long , all as specified and directed

S&F aluminium anodised barrel tower bolts extruded section of size 100 mm long , all as specified and directed

S&F aluminium alloy, anodised, sliding door bolt of length 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed.

S&F butt hinges medium weight MS cold rolled 100mm long complete all as specified and directed.

S&F butt hinges medium weight MS cold rolled 75mm long complete all as specified and directed.

S&F aluminium handle extruded fabricate type anodised of size 150 mm complete all as spd and directed.

S&F aluminium handle extruded fabricate type anodised of size 100 mm complete all as spd and directed.

M & L for 2nd class soft wood weather boarding clean sawn, plain 20mm thick and fixed with 30 mm laps complete all as spd & directed.

M & L for 6 mm thick ply wood grade BWR type BB fixed with nails to timber frame work on wall complete all as spd & directed.

M & L for 6 mm thick ply wood grade BWR type BB fixed with nails to timber frame work on ceiling complete all as spd & directed.

M&L for 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work complete all as spd & directed.

M & L Plain fillets, square, rectangular in section exc 3 Sqcm but n.exc 6 Sqcm clean sawn secured with nails in IInd class soft wood complete all as spd & directed.

Dismantling of unframed timber scantling 40 Sqcm and over in section, in any position complete all as specified and directed.

M & L for IInd class hard wood clean sawn (unframed) timber fixed as in scantling, complete all as spd & directed.

Description all as per item No 63 above but except timber

M & L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as spd & directed.

M & L for preparation of old painted wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as spd & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as spd & directed.

M&L for Granite slab 16 to 18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as spd & directed by Engr-in-Charge.

M&L light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over screed bed or bedding layer of mortar 15 mm thick (1:6) for laying floor finishes complete all as spd & directed.

M&L for Non-skid jointless coloured ceramic tiles 7 to 8 mm thick (square /rectanglar) area of each tiles exceeding 0.11 but n exc 0.18 sqm, in each floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as spd & directed.

M&L for coloured glazed ceramic tiles in vertical surface 450mm x 300mm x 6 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed.

S&F in repair 500 litres capacity Rotational moulded polyethylene water storage tanks triple layered (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 1 0 g m s) complete all as specified in SSR Part I including disconnectiong of existing tank complete all as specified and as directed.

M/S Manzoor Constructions

M/S U.K. ENTERPRISES

JANDOO AND CO.

M/S HAMID & CO