KHEP 11 2019-20

Special repair works

Earth work excavation in hard stiff clay, stiff block cotton hard red earth, shales, murram, gravel stoney earth, and earth mixed with small size boulders and hard gravelley soil with an initial lead of 10m and lift of 2 m including cost of all materials lead, lift labour charges etc., complete.

Providing Plain cement concrete 1:4:8 using 40mm size of graded HBG stone for foundation & flooring, etc., including cost of all materials,shuttering charges, labour, curing charges, lead lifts etc., complete.

Providing Random rubble masonry in C.M.1:6 for foundation and basement including cost of materials, lead, lifts, labour and curing charges etc., complete.

Providing Brick work in CM 1:5 using clay burnt bricks for super structure including cost of all materials, labour charges, curing scaffolding charges, curing all leads and lifts etc., complete and as directed by Engineer.

Providing RCC 1:2:4mix using 12mm and 20mm hard broken stone (machine crushed) for lintel beam, plinth beam and sunshade etc., including cost of all materials, shuttering charges,scaffolding charges leads,lifts, curing charges etc., complete (but Excluding the cost of steel reinforcement)

Supplying and fabrication of RTS Rods for reinforcements including cost of all materials leads, lifts labour charges etc complete.

Providing floor finish with vitrified ceramic tiles of approved make, colour and quality and of size 600x600x8mm over 10mm thick Cement mortar 1:3 bedding and pointing with same coloured cement in all floors including cutting chase in walls wherever required, cost of all materials labour charges lead, lift, curing T&P etc., complete. - 10M²

Plastering in CM1:5, 12 mm thick for inner and outer walls including cost of all materials, lead, lift Transport, labour scaffolding charges and curing etc, Complete and as directed by board Engineer at site.

Providing and Placing in position structural steel refctangular hollow section for roofing of room as instructed by Engineer at site including cost of all materials,L angle for fixing, cutting, bending,holes, bolt/nut, Painting two coats of enamel paint over a coat of primer labour, lift and curing etc., complete

Supplying and fixing of colour coated crimp curve metal roofing sheet of 0.50mm thick of TATA ISI make over M.S Structural frame work with necessary screws including cost of colour coated metal roofing sheet, screws for fixing, and all the required materials, lead, lift, labour charges, etc., complete. (S.I. No.293)

Dismantling of existing Aluminium Partitions, clearing away and carefully stacking materials including cost of labour, lead, lift T&P etc., complete as directed by department Engineer at site.

supplying and fixing of structural steel name board of size 1.5m x 1m 14G steel plate with L angles of size 45x45x5mm(for name board) and 50 x50x 6mm (for support) including writing of name board with the Tamil and English words given by the engineer at site including cost of all the required materials,Painting two coats of enamel paint over a coat of primer, lead, lift, labour charges, etc., complete.

Wiring with 2x 1.5 sqmm (22/0.3) PVC insulated SC. Unsheathed Copper Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box inflush with wall with 5A F.T switch covred with hylum sheet of 3mm thick with painting of suitable Colour with continuous earth wire connection of 14SWG TC wire for open PVC light point/ fan point

supplying and fixing of 5A switch and socket points including wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated SC unsheathed copper conductor of cable 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150x100x113mm TW switch box with 3mm thick hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable color for concealed PVC plug point cable, pipe, labour, lead etc complete.

Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable heavy gauge M.S. conduit pipe concealed portion with suitable color

Supplying and fixing of pendent brass holder with 9Watts C.F.L. bulbs including cost of all materials leads and lifts etc., complete and as directed by Engineer at site.

Supply and fixing of 4' x 20W LED fitting with ISI mark (Philips / Crompton / Wipro) on wall leads from terminals including cost of all materials such as cables, pipes, labour, lead etc, complete. - 1 No.

Supply and fixing of 1200mm (48") AC ceiling fan confirming to ISS 374 /1979 (Bajaj / Crompton / Usha) complete with stepped electronic 300W regulator with down rod on the existing clamp including cost of all materials such as cables, pipes, labour, lead etc, complete.- 1 No.

Interior Colour washing with two coats of Oil Bound distemper over a coat of water based primer for interior surfaces including cost of all materials, scaffolding, Labour, Lead, Lift etc., complete

Exterior Colour washing with two coats of Cement paint over a coat of white cement for the exterior surfaces including cost of all materials, scaffolding, Labour, Lead, Lift etc., complete.

Painting the old steel / Iron work with two coats of approved quality colour enamel paint over a coat of primer of red oxide including cost of all materials, brushes, lead, lift etc., complete

Painting the new steel / Iron work with two coats of approved quality colour enamel paint over a coat of primer of red oxide including cost of all materials, brushes, lead, lift etc., complete.

Supplying and fixing in position of Mild steel windows made up of single leaf with partly fixed bottom paneled with 16 gauge Ms.Sheet and top with partly glazed of 3mm thick Windows of required size using 23x18x18x3mm ‘Z’ section for window main frame, 46x23x20x3mm ‘J’ section for Intermediate frame, 23x18x18x3mm ‘Z’ section for shutter frame with 4 / 6 leaves top leaves glazed with 5mm thick pin head glass, bottom leaves paneled with MS sheet of 16Gauge, with 10MM squqre bar grill arrangements at 100mm c/c with 4 Nos of hold fasts , handle pulleys, latches with locking arrangement including cost of fabrication , transporting , lifting and fixing ,embedding the hold fasts in walls rigidly with concrete PCC 1:2:4 ,cost of all materials, labour charges, Lead, Lift, T&P , one coat of red oxide primer etc., complete.

colour washing inside and outside the building with two coats of plastic emulsion paint with thorough scrapping including cost of all materials, labour, lead, lift, etc., complete.

Filling well gravel good quality for below flooring including cost of gravel with proper consolidation with all lead, lift, etc., complete.

Polishing the mosaic tiles with polishing machine with good quality, neat finishing including cost of all materials, labour, lead, lift, etc., complete.

Providing floor finish with anti skid tiles of approved make, colour and quality with suitablesize over 100mm thick in CM 1:3 including cost of all materials, labour, lead, lift, etc., complete.

Providing and fixing of Medium density fibre board false ceiling 12mm thick, half perforated with anodized aluminum grid construction consisting of 38mm x 38mm tee 2.05mm thick forming 600mm x 600mm panel complete with various members for fastenings and fittings to minute tolerance suspended from R.C structure with 8mm aluminum painted M.S rods with necessary fastenings arrangement etc., and 25mm x 25mm, 2.05mm thick anodized aluminum angle screwed on to the wall with rawal plugs including providing openings for AC, Lighting and other auxiliary works, as directed by the Engineer in charge including cost of all materials, T&P’s labour charges, leads, lifts, etc., complete.

Supplying and fixing in position Flush shutters Doors teak wood finishing with water proofing of required size with pressed steel door frame of size 105x60mm, 18 gauge as per IS 4351-2003 with single leaf factory made flush type shutter of 30mm thick using particle board stamped IS 3087-1985/Type-I with ‘E’ type T.W. beading bonded with water resistant adhesive fixed to the pressed steel door frame with following fixtures,