Replacement of electric components and transformer oil in 80 kva voltage stabilizer, Providing, fitting of HT knife edge link set on HT side of substation installed at Lift irrigation station Beaspur parlah and rewinding of 50 hp motor of pumping un

Replacement of electric components and transformer oil in 80 kva voltage stabilizer, Providing, fitting of HT knife edge link set on HT side of substation installed at Lift irrigation station Beaspur parlah and rewinding of 50 hp motor of pumping unit no II installed at Lift irrigation station, Kothey Parlah new.

Providing and filling of 200 liters of transformer oil in 80 kva voltage stabilizer installed at lift irrigation station Beaspur parlah. Job includes dismantling of all internal components of voltage stabilizer, providing and fitting of voltmeter, ampere meter and one number rotary switch. Properly cleaning of coils and oil tank to remove carbon deposits, water and slit from coils and oil tank, complete varnishing of coils. Painting of voltage stabilizer as per colour code. Providing and fitting of knife edge link sets of 50/5 size on the HT side over the poles, the job includes providing and fitting of MS angle with clamps as per size of poles for fitting of link sets. The clamps should be fastened with nuts and bolts of required size. Rewinding to 50 hp motor of pumping unit no II installed at lift irrigation station, Kothey parlah new by extracting out old damaged winding manually and cleaning of stator slots. Inserting of insulation papers in slots, complete rewinding of the stator by using standard copper wire of requisite gauge. Making of connection coils in star delta. Tightening /locking of coils into the slots by using glass fiber wedges. Complete varnishing of the stator and allowing to completely dry. Metal filling on worn out positions by way welding of the positions of bearings and coupling pulley, turning and finishing making the area smooth and balanced. Providing and fitting of two number new bearings on driving and non-driving end, nuts and bolts. The job includes cost of material, skilled/ semi-skilled labour, transportation charges and carriage charges of material on head load from road side to lift station on head load that is 1 km’s from Radha swami satsang ghar for lift irrigation station Beaspur parlah and 400 meters for lift irrigation station Kothey parlah new. Note:- The Tenderers are requested to visit the site and quote the rate as per site conditions. Dimensions can vary by +- 5 percent. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions.

Rebate on Old Parts

M/S RAGHUNATH MECHANICAL AND ELECTRICAL ENGINEERING WORKS

NATIONAL ELECTRO-MECH COMPANY

NATIONAL ELECTRO-MECH COMPANY