Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹89.8 LAccepted-AOC | ₹89.8 L Quoted ₹92.9 L | L1 | Accepted-AOC Being L1 |
| 2 | L2₹97.6 LRejected-Finance | ₹97.6 L | L2 | Rejected-Finance Being L2 |
| 3 | L3₹99.8 LRejected-Finance 6146 HIRA CHOWK SIRKI BAZAR BATHINDA PB 151005 | BATHINDA | PUNJAB | 151005 | ₹99.8 L | L3 | Rejected-Finance Being L3 |
| 4 | L4₹1.0 CrRejected-Finance | ₹1.0 Cr | L4 | Rejected-Finance Being L4 |
| 5 | L5₹1.1 CrRejected-Finance | ₹1.1 Cr | L5 | Rejected-Finance Being L5 |
| Sl No | Description | Qty | Unit | LACHHMAN SINGH AND BROTHERS L1 | M/S Sulakh Brothers L2 | malik constructions L5 | B B BUILDERS L3 | M/S RAJESH KUMAR & SONS L4 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of cement concrete (un reinforced) in ground floor and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge. | 88.5 | Cum | 150 ₹13,275 | 80 ₹7,080 | 150 ₹13,275 | 100 ₹8,850 | 200 ₹17,700 |
| 2.00 | M&L for 25mm thick cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in sub base for other than ground floors complete all as specified and directed by Engineer-In-Charge. | 1,000 | Sqm | 100 ₹1,00,000 | 90 ₹90,000 | 80 ₹80,000 | 60 ₹60,000 | 180 ₹1,80,000 |
| 3.00 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of the premises complete all as specified and directed by Engineer-in-charge | 5,000 | Sqm | 10 ₹50,000 | 10 ₹50,000 | 10 ₹50,000 | 10 ₹50,000 | 10 ₹50,000 |
| 4.00 | M&L for coloured joint free non-skid ceramic floor tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed of cement motor 1:6 complete all as specified and directed by Engineer-In-Charge. | 1,000 | Sqm | 600 ₹6,00,000 | 585 ₹5,85,000 | 600 ₹6,00,000 | 550 ₹5,50,000 | 600 ₹6,00,000 |
| 5.00 | M&L for coloured glazed ceramic tiles in vertical surfaces 350 x 250 x 7mm / 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering of cement mortor 1:4 complete all as specified and directed by Engineer-In-Charge. | 4,000 | Sqm | 580 ₹23,20,000 | 500 ₹20,00,000 | 550 ₹22,00,000 | 500 ₹20,00,000 | 600 ₹24,00,000 |
| 6.00 | M&L for treatment of sunken floor slab comprising of the following specifications with and including demolition of sunken floors complete all as specified and directed:-
(i) Cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. Provision of 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding concrete to achieve proper slope including cutting holes in bricks or RCC wall for spout.
(ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with and including integral water proofing compound Sika Plastocreat plus or equivalent make in Fosroc / Thremax as approved by GE @ 0.2% by wt of cement consumed including filling it with water to check dampness and seepage and where dampness / seepage is noticed, nozzles shall be fixed and grouting carried out.
(iii) All junctions points of side wall where CI/GI/PVC pipes are passing through shall be sealed with epoxy putty Sikaguard 694 F(I) or equivalent make in Fosroc / Thremax as approved by GE.
(iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. (v) Applying two coats of polymer smodified cementious water proof coating with Sika Topseal 107 or or equivalent make in Fosroc / Thremax as approved by GE in two coats @ 3kg/sqm to sanwiched with glass fibre reinforcemnt: Sika Fab-1 or or equivalent make in Fosroc / Thremax as approved by GE over base coat as per manaufacturer's instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion. (vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound SIKA plastocreat plus or equivalent make in Fosroc / Thremax as approved by GE @ 0.2% by wt of cement consumed as per manufacturer's specification including rounding of corners and injuctions sloping towards spout.
(vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint.
Note :- (i) Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. Test record for each sunken slab shall be maintained. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing and all M&L is included in the rates quoted above. (ii) For payment purpose, the plan area of sunken floor shall be measured.
Note :- (i) Material test certificate and authentication should be provided by the manufacturing company. (ii) The treatment shall be carried out by authorized applications. | 315 | Sqm | 800 ₹2,52,000 | 950 ₹2,99,250 | 1,200 ₹3,78,000 | 1,200 ₹3,78,000 | 1,500 ₹4,72,500 |
| 7.00 | M&L for cement concrete type E2 1:5:10 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed by Engineer-In-Charge. | 63 | Cum | 2,000 ₹1,26,000 | 850 ₹53,550 | 1,500 ₹94,500 | 1,200 ₹75,600 | 1,000 ₹63,000 |
| 8.00 | Supply only integral waterproofing compound complete all as specified and directed by Engineer-In-Charge. | 75 | Kgs | 80 ₹6,000 | 60 ₹4,500 | 90 ₹6,750 | 200 ₹15,000 | 100 ₹7,500 |
| 9.00 | S&F 32mm dia 'medium grade' tubes galvanised, with all fittings and fixed complete to floors as spouts in sunken portions complete all as specified and directed by Engineer-in-Charge. | 200 | RM | 250 ₹50,000 | 200 ₹40,000 | 300 ₹60,000 | 300 ₹60,000 | 250 ₹50,000 |
| 10.00 | S&F in repair vitreous china squatting pan "ORISSA" pattern size 580mm x 440mm, white with integral foot rest including cast iron 'P' or 'S' trap of 100 mm dia and connection to trap including cement concrete, and to flushing pipe, anti-syphonage pipe etc, including making good to floor, complete all as specified. | 100 | Each | 1,300 ₹1,30,000 | 1,150 ₹1,15,000 | 1,380 ₹1,38,000 | 2,000 ₹2,00,000 | 1,200 ₹1,20,000 |
Updated dates
Tender Value
₹1.3 Cr
EMD Value
₹2.0 L
Closing Date
24 Nov 2025, 6:00 pmClosed
COMMANDER WORKS ENGINEER
HQ CWE HISAR, HISAR MIL STN HISAR
COMPREHENSIVE REPAIR TO ROOF TREATMENT PLUMBING SUNKEN AND ALLIED WKS UNDER GE HISAR
2025_MES_730942_1
CWE/HSR-43 OF 2025-26
Open Tender
Civil Works
180 days
HISAR
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
GE HISAR
₹2.0 L
22 Jan 2026
15 Sept 2025
26 Nov 2025
15 Sept 2025
24 Nov 2025
10 Nov 2025
16 Sept 2025 - 23 Sept 2025
Demolition of cement concrete (un reinforced) in ground floor and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.
M&L for 25mm thick cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in sub base for other than groung floors complete all as specified and directed by Engineer-In-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of the premises complete all as specified and directed by Engineer-in-charge
M&L for coloured joint free non-skid ceramic floor tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding of cement motor 1:6 complete all as specified and directed by Engineer-In-Charge.
M&L for coloured glazed ceramic tiles in vertical surfaces 350 x 250 x 7mm / 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering of cement mortor 1:4 complete all as specified and directed by Engineer-In-Charge.
M&L for preparation of old surface including screed bed or bedding 10mm thick of cement mortar 1:4 with water proofing compound (NOTE :- water proofing compound shall be measured and paid seperately), and applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m, including cleaning surface complete all as specified and directed by Engineer-in-Charge.
S&F 32mm dia 'medium grade' tubes galvanised, with all fittings and fixed complete to floors as spouts in sunken portions complete all as specified and directed by Engineer-in-Charge.
S&F in repair vitreous china squatting pan "ORISSA" pattern size 580mm x 440mm, white with integral foot rest including cast iron 'P' or 'S' trap of 100 mm dia and connection to trap including cement concrete, and to flushing pipe, anti-syphonage pipe etc, including making good to floor, complete all as specified.
S&F in repair water closet vitreous china squatting pan ‘Pedestal’ pattern whiteincluding cast iron 'P' or 'S' trap of 100 mm dia and connection to trap including cement concrete, and to flushing pipe, anti-syphonage pipe etc, including making good to floor, complete all as specified.
S&F seat and cover for pedestal pan complete all as specified and directed by Engineer-in-Charge.
Taking up or down 15mm dia tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engineer-In-Charge.
Taking up or down 20mm dia tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engineer-In-Charge.
S&F 15mm bore tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors of any length all as specified and directed by Engr-in-charge
S&F 20mm bore tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors of any length all as specified and directed by Engr-in-charge
S&F in repair 10 Ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle including bracket complete all as specified and directed by Engineer-In-Charge. Make : PARRYWARE SLIMLINE UNO E8348 / CERA B1010109 / or equivalent in list of makes
Taking down and refixing the same after repairs old 6/10 Ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle including bracket complete all as specified and directed by Engineer-In-Charge.
Demolition of brick tiles or terracing tiles, single layer on roofs complete all as specified and directed by Engineer-In-Charge.
Demolition of mud phuska in roof any thickness incuding plastering & leeping (whether full thickness removed or only part thereof) complete all as specified and directed by Engineer-In-Charge.
M&L for wire brushing and cleaning concrete surface on top of roof providing 15mm thick screed in cement mortar (1:4) with water proofing compound over and including 40mm thick cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) complete all as specified and directed by Engineer-In-Charge.
M&L for providing 10mm thick polymer modified plaster in ratio 1:10 (1 part of polymer and 10 parts of cement with solid contents not less than 30%) over slab and applying priming coat of epoxy primer with resin and hardner with water dilution as per manufacturer instructions, applying 1st coat of solvent based polyurathene liquid membrane not less than 500 micron thick UV stable having SRI value greater than equal to 105 with consumption of 0.61 Kg/Sqm and applying 2nd coat solvent based polyurathene liquid mambrane not less than 500 micron thick UV stable having SRI value greater than equal to 105 with consumption of 0.61 Kg/Sqm over dried 1st coat complete all as specified and directed.
S&F PVC (SWR) bends ISI marked any radius of 110mm bore with access floor complete all as specified and directed by Engineer-In-Charge..
Disconnecting and refixing vitreous china wash basin after repair incl cutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and waste pipe and 15mm piller tap cast copper alloy withcapstan head chromium plated complete.
Supply and fixing Fiber Glass Reinforced plastic (FRP)Door Frames of cross section 90 mm x 45 mm havingsingle rebate of 32 mm x 15 mm to receive shutter of 30mm thickness.The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be covered with fiber glass from all sides.M.S. stay shall be provided at the bottom to steady the frame, complete as specified by the manufacturer and as per directions of Engineer-in-charge.
S&F in repairs angle valves cast copper alloy chrome plated fancy type 15 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed by Engr-in-charge. Make : PARRYWARE G9004A1 / JAQUAR ESSCO TQT-526N / CERA F8040201 / SOMANY 272210120043 / MARC ESSCO ES-526 or equivalent in list of makes
Taking down and refixing after repair tubular towel rail of any type complete all as specified and as directed by Engineer-in-Charge
Disconnecting existing old angle valves and refixing the same after repairsscrewed both ends for iron pipe or for unions all as specified and directed by Engr-in-charge.
S&F in repairs 15mm dia bib taps, cast copper alloy with curtch or butterfly handle, screwed down, screwed for iron pipe of for brass ferrule fancy type chormium plated complete all as specified and directed by Engineer-in-Charge. Make : PARRYWARE G4706A1 / JAQUAR ESSCO COS-103107 / CERA F2002152 / SOMANY 272211250031 / MARC ESSCO ES-511-A. or equivalent in list of makes
S&F in repairs 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and flynuts, screwed for iron pipe and fixed fancy type complete all as specified and directed by Engineer-in-Charge. Make : PARRYWARE 54702A1 / JAQUAR ESSCO MQT-508KN / CERA F2002101 / SOMANY 272211250011 / MARC ESSCO ES-507 or equivalent in list of makes.
Disconnecting and refixing 15mm dia pillar taps after repairs, screwed for iron pipe and fixed fancy type complete all as specified and directed by Engineer-in-Charge.
S&F in repairs 15mm dia Brass L Bend CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, with or without lettered 'HOT' or 'COLD' with long screwed shanks and flynuts, screwed for iron pipe and fixed fancy type complete all as specified and directed by Engineer-in-Charge. Make : PARRYWARE T1916A1 / JAQUAR ESSCO MQT-517BKN / CERA F2002401 / SOMANY 272201250011 / MARC ES-517-B or equivalent in list of makes
Disconnecting and refixing the same after repairs 15mm dia Brass CP mixer with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Make : JAQUAR ESSCO ALE-ESS-585/ CERA F8030107AB / SOMANY 272150680051 or equivalent in list of makes
S&F PVC connections 15mm size with PTMT nuts of length 450mm long complete all as specified and directed by Engineer-In-Charge.
S&F in repair chromium plated shower rose fancy type with shower arm fixed to 15mm bore pipe all as specified and directed by Engr-in-charge. Make : PARRYWARE T9808A1 / CERA F7010213AB / SOMANY 272220080011 / MARC ES-549 & ES-536
S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges chromium plated fixed to wall with screws. Make : JAQUAR ESSCO AEC-1111NB / CERA F5007103 / SOMANY 272130740051 or equivalent in list of makes
Taking down and refixing after repair tubular towell rail, of any type complete all as specified and as directed by engr-in-charge
S&F chromium plated towel ring fixed with and including Chromium plated brass screws and wooden/plastic cleats Make : JAQUAR ESSCO AEC-1121N / CERA F5003105 / SOMANY 272130740071 or equivalent in list of makes
S&F 110/110 PVC (SWR) 'P' trap for fixing with WC complete all as specified and directed by Engineer-In-Charge
S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engineer-In-Charge
S&F in repairs 110mm dia PVC (SWR) pipes single socketed, in any length with rubber rings joints fixed in walls for rainwater pipes complete all as specified and directed by Engineer-in-Chage.
S&F in repairs 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber rings joints fixed in walls for rainwater pipes complete all as specified and directed by Engineer-in-Chage.
S&F 110mm dia PVC (SWR) bends any radius complete all as specified and directed by Engineer-In-Charge.
S&F 110mm dia PVC (SWR)
M&L for brick work with sub class 'B' bricks old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortor 1:4 complete all as specified and directed by Engineer-in-Charge.
Taking down cement or cement lime plaster, any description complete all as specified and directed by Engineer-in-Charge.
M&L rendering 10 mm thick on fair faces or other than fair faces of brick or concrete surfaces built in cement mortar 1:4 and finished even and smooth (without using extra cement) complete all as specified and directed by Engineer-in-Charge.
M&L rendering 10 mm thick on fair faces or other than fair faces of brick or concrete surfaces in ceiling built in cement mortar 1:3 and finished even and smooth (without using extra cement) complete all as specified and directed by Engineer-in-Charge.
M&L including preparation of newely plastered surface on wall surfaces with three coat of white wash over a coat of white primer complete all as specified and directed Engineer-In-Charge.
S&F in repair 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed
S&F waste pipe PVC low density polyethylene 32 mm dia.
M&L including preparation of newely plastered surface of ceiling with three coat of white wash complete all as specified and directed Engineer-In-Charge.
Taking down chowkats or frames not exc 1.5 sq.m area of each complete all as specified and directed by Engineer-In-Charge
S&F Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
8160543TD.pdf
Tender Documents • 1.43 MB
BOQ_818326.xls
BOQ • 1.69 MB
Download all tender documents and submit your bid