CERTAIN REPAIR TO FLOORING ROOF PLASTERING JOINERY INTERNAL WATER SUPPLY SANITARY FITTING AND CONNECTED ITEMS IN MWC MMT L5 CG COMPLEX NMRL ZONE 4 AND OTHER AREA UNDER AGE BR II AND REPAIR AND MAINT OF SEWAGE SYSTEM INCLUDING LINE CLEANING ETC NSOD C

Amount

Resecuring without taking down of chowkats or frames with shutter (Without taking off shutters from the frames) area n.exc n,exc.1.5 Sqm each complete all as specified.

Resecuring without taking down of chowkats or frames with shutter (Without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified.

Taking down chowkat with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each complete all as specified.

Taking down chowkat with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified.

Taking down shutter of any description area exc 1 Sqm and n.exc 2 Sqm each.

Taking down shutter of any description area exc 2 Sqm each.

Taking down aluminium door shutters dismantling carefully all members and reassembling the same with and including new screws, rubber gasket, aluminium beads & cleats of existing size and shape and refixing the door shutters in same opening with handles & mortice looks complete all as specified and directed. Note : Broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock shall be measured and paid separately under relevant items.

Taking down aluminium window shutters dismantling carefully all members and reassembling the same with and including new screws, rubber gasket, aluminium beads & cleats of existing size and shape and refixing the door shutters in same opening with handles & mortice looks complete all as specified and directed. Note : Broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be measure and paid separately under relevant items.

Supply and fixing powder coated aluminium sections (minimum thickness of powder coating 50 micron) for partitions, windows, ventilators and doors for sliding or openable shutters including fabrication of frame/shutters and fixing to walls/floors with necessary lugs, jointing cleats etc including all accessories such as necessary joining cleats, glazing clips, ruber neoprene packing, cobra hinges, butt hinges, tower bolts, hooks and eyes, peg syays and handles,anodised aluminum snap beading, rollers, SS screws etc including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required complete all as specified Note: - (i) Glass panes will be measured & paid separately. (ii) Rubber beading will not be weighed and paid separately

Supply & Fixing concealed star lock powder coated for aluminium window shutters fixed as per manufacturers instructions and as directed.

Hacking out old broken glass ( any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Material & Labour for 4 mm thick plain sheet glass ordinary quality in squares n.exc 0.5 sqm each pane fixed with rubber beading in aluminium windows/doors etc complete all as specified and directed.

Material & Labour for 4 mm thick plain sheet glass ordinary quality in squares exc 0.5 sqm in each pane fixed with rubber beading in aluminium windows/doors etc complete all as specified and directed.

Supply & Fixing Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

Material and labour for second class hardwood (SAL) plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified.

Supply & Fixing 35 mm thick 2nd class hard wood (Sal) glazed and skeleton shutters factory made open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze, size of members of shutters as specified in SSR part I, section 8, clause, 8.20 (b) complete all as specified.

Supply & Fixing 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed .

Supply & Fixing Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) in opening complete as per manufacturer's specification and drawing shown in SSR Part II.

Supply & Fixing 30 mm thick Rajshri brand factory or equivalant made moulded door shutter wood free consisting of frame made out of MS tubes of 19 gauge thickness and size of 20 mm x 40 mm for stiles as well as top, bottoMaterial & Labourock rail. MS frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1 mm wall thickness, bonded using solvent cement/eynoacrylate adhesive with 5 mm thick moulded PVC sheet of density 600 Kg/Cbm manufactured by an ISO - 9001-2015 certified company with 2, 4, 6 raised panel design in plain/prelam colours after routing the moulded design on one side of the inside panel 5mm plain /prelam PVC sheet to be pasted using solvent cement /eynoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10 mm thick & 20 mm wide PVC sheet baton (made by sticking 2 Nos foam PVC sheets of 5 mm thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 20 mm thick (5 mm x 4 Nos ) thick PVC sheet to be given for lock provision at lock height . Door to be fixed with frame with 3 Nos stainless steel butt hinges of size 100 mm x 25 mm x 2 mm and 50 mm long steel screws drilled suitable to pass through both the walls of the MS tube other hardwares should be fixed with 20 mm x 8 mm size steel screws etc complete as per manufacturer's specification and drawing shown in SSR Part II.

Supply and fixing in repairs vitreous china wash down water closet pan (Padestal pattern) white, including including 'P' or S trap and matching plastic sheet cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium anodized hinging device complete all as specified.

Supply and fixing in repairs vitreous china squatting pan, ‘Orissa’ pattern of size 580 x 440 mm white, with integral foot rest (excluding flushing Cistern, flush pipe etc) including 'P' or S trap and provision of lime concrete bedding complete all as specified.

Supply & Fixing in repair health faucet ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to stop cock 15 mm bore complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs low level PVC flushing cistern (coloured) of heavy duty, 10 Ltrs capacity, syphonic action type complete with inlet, ball valve, float and handle including cast iron bracket and 32 mm bore PVC flush pipe and connecting to WC complete all as specified.

Supply and fixing in repairs vitreous china wash hand basin white of size 550mm x 400mm flat back including cutting for and pinning in ends of brackets including brackets, 32 mm dia brass CP waste coupling and fitted to wash basin complete all as specified.

Supply & Fixing in repairs 15 mm bore bib cock CP fancy type with wall flange complete all as specified and as directed by Engr-in-Charge .

Supply & Fixing in repairs 15mm bore Stop valves chromium plated fancy type screwed down high pressure with crutch or butterfly handle handle screwed both ends.complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

Supply and fixing 15 mm bore pillar taps cast copper alloy,chromium plated fancy type with capstan heads screwed down high pressure with or without lettered `Hot' or `Cold' with long screwed shanks and fly nuts screwed for iron pipe or brass ferrule complete all as specified.

Supply & Fixing Single Piece vitreous china WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, Size: 370x695x795 mm, S trap-300mm including connecting piece and making all connections complete all as specified and directed by Engr-in-Charge .

Supply & Fixing in repairs Rimless, Blind Installation Wall Hung WC vitreous china with UF soft close slim seat cover, Hinges, Accessories Set, Size : 370x490x365 mm S trap-300mm including connecting piece and making all connections complete all as specified and directed by Engr-in-Charge .

Supply & Fixing in repairs single piece slim concealed cistern vitreous china with wall mounting frame, installed kit and S-type drain pipe connection set for wall hung WC including accessories set complete including making all connections complete all as specified and directed by Engr-in-Charge .

Supply & Fixing in repairs stainless steel towel ring square with round flange of size 210mm x 210mm complete all as specified and as directed by Engr-in-Charge

Supply & Fixing in repairs stainless steel CP towel rail 600 mm long with round flange complete all as specified and as directed by Engr-in-Charge

Supply & Fixing in repairs Toilet paper Holder Recessed Type (Stainless Steel) complete all as specified and as directed

Supply & Fixing in repairs health faucet ABS Body with 8 mm dia 1 mtr Spirochrome flex flexible tube and wall hook complete all as specified and as directed by Engr-in-Charge

Supply & Fixing in repairs 15 mm bore Pillar taps CP fancy type with wall flange and lift type operating knob and base flange complete all as specified and directed by Engr-in-Charge .

Supply & Fixing in repairs 15 mm bore bib cock CP fancy type with wall flange complete all as specified and as directed by Engr-in-Charge .

Supply & Fixing in repairs 15 mm bore angular stop cock CP fancy type with wall flange complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in repair vitreous china urinal pot with sensor of Size 370mm x 390mm x 610mm Star white (Senso Art) including making all connections complete all as specified and directed.

Supply & Fixing in repair for Urinal Sensor Flushing, Electric Operated complete all as specified and directed by Engr-in-Charge.

Supply & fixing Overhead Shower ø140mm Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System complete all as specified and as directed

Supply and fixing 8 mm thick corner glass shelves half round of average radius 200mm including fixing with D type CP brass brackets and stainless steel railing along edges of shelf complete all as specified and directed.

Supply & Fixing 600 mm size glass self assembly fency type with frame chrome finished (with plating of Nickel-10 micron, chromium-0.3 micron and salt spray 200hrs + validated adhesion pass ) fixed with chromium plated brass brackets and screw complete all as specified and as directed by Engr-in-Charge.

Supply and fixing 32mm bore Waste coupling of PTMT (half or full threaded) Minimum weight 45gms complete all as specified.

Supply and fixing PVC connections 15 mm size with PTMT nuts of length 450 mm.

Supply & Fixing PVC waste Flexible pipe 32mm dia 800mm long with socket sutable for WHB/Sink/urinal complete all as specified and as directed.

Supply & Fixing in repairs cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), dia of out let 75mm complete all as specified.

Supply & Fixing in repairs vitreous china urinals, bowl type (back or corner wall type,) complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisterns with brackets, flush pipes, inlet, outlet etc complete all as specified and as directed by Engr-in-Charge..

Supply & Fixing in repairs vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified and as directed by Engr-in-Charge..

Supply & Fixing in repairs viterous china urinal partition white of size 310mm x 700mm terminating about 40cm above floor, complete all as specified and directed.

Supply & Fixing in repairs 15mm bore Brass CP mixer fancy type for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing in repairs 15 mm bore two way bib cock CP fancy type with wall flange complete all as specified and as directed by Engr-in-Charge .

Material and labour for 75mm bore Cast iron spun pipes soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified.

Material and labour for 100mm bore Cast iron spun pipes soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified.

Dismantling existing PVC water tank any type and pattern and in any position, setting aside of capacity 1000 ltrs, 2000 ltrs 5000 Ltrs and 10000 Ltrs and removing to store yard complete all as specified in SSR Part I

Supply and fixing rotational moulded polyethylene water storage tank 1000 Ltr capacity, (cylindrical vertical with closed top) including all connections for inlet, outlet, overflow and washout etc hoisted and fixed in position all as specified in SSR Part-I including PVC cover with locking arrangement complete all as specified.

Supply and fixing rotational moulded polyethylene water storage tank 2000 Ltr capacity, (cylindrical vertical with closed top) including all connections for inlet, outlet, overflow and washout etc hoisted and fixed in position all as specified in SSR Part-I including PVC cover with locking arrangement complete all as specified.

Supply and fixing rotational moulded polyethylene water storage tank 5000 Ltr capacity, (cylindrical vertical with closed top) including all connections for inlet, outlet, overflow and washout etc hoisted and fixed in position all as specified in SSR Part-I including PVC cover with locking arrangement complete all as specified.

Supply and fixing rotational moulded polyethylene water storage tank 7500 Ltr capacity, (cylindrical vertical with closed top) including all connections for inlet, outlet, overflow and washout etc hoisted and fixed in position all as specified in SSR Part-I including PVC cover with locking arrangement complete all as specified.

Supply & Fixing in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwar wall or including fxing cantilever brackets and connecting uinon to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified .

Supply & Fixing in repairs vitreous china wash hand basin white of size 630 x 450 mm flat back including cutting for and pinning in ends of brackets including brackets, 32 mm dia brass CP waste coupling and fitted to wash basin complete all as specified.

Supply & Fixing in repairs stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature where ever required and fitting the same with necessary stainless steel nuts and bolts with necessary accessories & stainless steel dash fasteners, stainless steel bolts of required size on the top of floor or the side of waist slab complete all as specified.

Supply and fixing in repair under counter wash hand basin vitreous china of size 605mm x 430mm x 200mm oval shape meticulously crafted from high quality materials with seamless finish white fixing with fastner/ bracket including 32mm dia brass CP waste coupling,15mm dia PVC connection with nuts and 32mm dia PVC waste pipe 90cm long and making all connections complete all as specified and as directed Engr-in-Charge.

Supply & Fixing in repairs double action floor spring hydraulically regulated made up of minium 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per manufacturer's instruction.

Supply & Fixing in repairs brass CP shower rose 125mm size complete all as specified and directed.

Taking up or down 15 mm bore GI water tubing with all fittings complete all as specified and directed.

Taking up or down 20 mm bore GI water tubing with all fittings complete all as specified and directed.

Supply and fixing 15 mm bore GI tubing medium grade with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings with suitable size GI clamps or laid in floors complete all as specified.

Supply and fixing 20 mm bore GI tubing medium grade with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings with suitable size GI clamps or laid in floors complete all as specified.

Supply and fixing in repairs 160 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with suitable size GI clamps complete all as specified and directed.

Supply and fixing in repairs 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with suitable size GI clamps complete all as specified and directed.

Supply and fixing in repairs 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with suitable size GI clamps complete all as specified and directed.

Supply & Fixing 160mm dia bore PVC (SWR) bends any radius complete all as specified and as directed

Supply & Fixing 110mm bore PVC (SWR) bends any radius complete all as specified and as directed

Supply & Fixing 75mm bore PVC (SWR) bends any radius complete all as specified and as directed

Supply & Fixing in repairs aluminium anodised Deco grill 7.5 mm size DG-102, fixed with F/H frames, 1.5mm th, bar size 6.2mm and 7.5mm thick in required sizes complete all as specified.

Supply & Fixing extruded aluminium alloy handles fabricated type anodized 150 mm size complete all as specified.

Supply & Fixing in repair extruded Brass handles fabricated type 125 mm size complete all as specified.

Supply & Fixing in repairs extruded Brass handles fabricated type 150 mm size complete all as specified.

Supply and fixing MS work as in holdfast and similar articles conforming to grade Fe-290 Gde-E-165 complete all as specified

Supply & Fixing in repairs aluminium (extruded section) body door closer hydraulically regulated, designation No.2, universal type, suitable for door shutter of 701 to 850 mm in width & of weight between 36 to 60 kg complete all as specified and directed.

Supply & Fixing in repairs 100mm size butt hinges extruded aluminium alloy with galvanized mild steel hinge pin anodised and fixed type C-21 complete all as specified .

Supply & Fixing in repairs 75mm size butt hinges extruded aluminium alloy with galvanized mild steel hinge pin anodised and fixed type C-21 complete all as specified .

Supply & Fixing 75 mm size Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed type B-11

Supply & Fixing 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11

Supply & Fixing in repair 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified .

Supply & Fixing in repair 150mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified.

Supply & Fixing in repairs 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified.

Supply & Fixing in repair 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed complete all as specified.

Supply & Fixing in repairs 200mm long brass barrel tower bolts of extruded sections complete all as specified.

Supply & Fixing in repairs 150mm long brass barrel tower bolts of extruded sections complete all as specified.

Supply & Fixing in repairs 140mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified .

Supply & Fixing in repair for 140mm long floor door stopper of brass body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified.

Supply & Fixing in repairs aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples complete all as specified.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.

Material and labour for false ceiling work of aluminium anodized ceiling grid system conforming to designation 3600 given in IS 207-10985 including all ceiling cleats screwed with 8mm dia adjustable suspenders rod pointed with two coats of synthetic enamel paint over a coat of red oxide primer, with necessary main tee, cross tee and wall angle of size 23.5x23.5x1.5mm thick and with 605mm x 605mm grid system suitable for room size complete all as specified.

Supply & Fixing Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

Material & Labour for 600mm x 600mm x 4 mm thick non asbestos fiber cement designer/coloured ceiliing board fixed in aluminium grid complete all as specified.

Material and labour for POP false ceiling using 600X900x12 mm thick plaster of paris with gypsum binder sheet decorative type including two coats of plastic emulsion paint and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25 mm spaced at 750 mm centre, secondary joist of size 75X20 mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2 M C/C, including dismantling old unserviceable false ceiling complete all as specified and directed.

Material & Labour for 2nd class hard wood (Sal) plain fillets exc 6 Sqcm and n.exc 13 Sqcm square, rectangular or triangular in section, clean sawn fixed with screws complete alll as specified and directed.

Material & Labour for 8 mm thick Vaneered decorative plywood grade I (with BWR resin ) with decoratve face vaneers on both faces fixed with screw to timber framework complete all as specified and directed.

Dismantling of boarding, any description, fixed in any position with nails

Material & Labour for 25mm thick 2nd class hardwood (Sal) boarding planed one side and edges tongued and grooved or rebated in floor and skirting complete all as specified and directed.

Material & Labour for providing PVC wall panelling consisting of PVC insulated panel having wall thickness of 5mm PVC sheet of density 600 Kg /Cum manufactured by an ISO 9001-2015 certified company and the desired thckness of Expaned polystyrene (EPS) (dependant on the insulation required) screwed into the wall using screws of adequate length. The screws shall be placed at a distance of 150mm and shall be 25mm from the edge of the insulated panel on all four sides of the panel. The PVC strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck using solvent cement adhesive at the places where two panel are joined, so as to cover the screw of both the panels, using solvent cement. 90 Degree heat bent striops of 5 mm thick PVC sheets of width 75mm x 75mm feathered at the edges shall be stuck at wall joints/pillars etc complete all as specified and directed.

Supplying, fitting and fixing 8mm thick Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not Iess than 1200 mm X 190 mm (with unilin/tongue-groove locking arrangement) having 0.2mm thick top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) having density > 850 kg/m3 substrate core over a rasin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than 1000 kg/m) over a 2 mm thk underlayer polyurethene foam on polythene sheet 250 micron, over a smooth, flat, hard subfloor free from moisture (< 8%), grease etc. complete in all respect with requisite accessories like end profile, transition profile, reducer 'T' profile etc. wherever required and preparation of base including all other incidental works as per direction & satisfaction of Engineer in charge. Cost of Laminate Floor Accessories only (Skirting ,End edge, T- moulding,Reducer) shall have to be added separately,wherever required complete all specified and directed by Engr-in-Charge.

Supplying, fitting and fixing 8mm thick Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not Iess than 1200 mm X 190 mm (with unilin/tongue-groove locking arrangement) having 0.2mm thick top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) having density > 850 kg/m3 substrate core over a rasin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than 1000 kg/m) over a 2 mm thk underlayer polyurethene foam on polythene sheet 250 micron, over a smooth, flat, hard subfloor free from moisture (< 8%), grease etc. complete in all respect with requisite accessories like end profile, transition profile, reducer 'T' profile etc. wherever required and preparation of base including all other incidental works as per direction & satisfaction of Engineer in charge. Cost of Laminate Floor Accessories only (Skirting ,End edge, T- moulding,Reducer) shall have to be added separately,wherever required complete all specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debris outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Material & Labour 10mm thick double charged vitrified ceramic tiles, premium quality of approved colour (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors laid over and including 20mm thick screed bed or bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour 10mm thick double charged vitrified ceramic tiles, premium quality of approved colour (square/rectangular) polished, area of each tiles not exceeding 0.36sqm (600x600mm), as in vertical surfaces such as skirting/dado etc., laid over and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour for coloured glazed ceramic tiles 450mm x 300mm x 7mm thick but laid on vertical surfaces such as skirting/dado laid over and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour for Non skid coloured ceramic tiles 7 to 8 mm thick (square/Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floor laid over and including 20mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including removal of rubbish out side MD land. Note: The place of disposal shall be find out by the contractor.

Material & Labour for 20-25mm thick, machine cut, Kota stone slab, as in floors etc. laid over and including 20mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including rubbing, cutting and polishing as specified in SSR Part I complete all as specified.

Material and labour for machine cut kota stone slab 18 to 20 mm thick as in vertical surfaces such as skirting/dado laid over and including 15mm thick backing coat in CM (1:4), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile including rubbing, cutting and polishing as specified in SSR Part I complete all as specified.

Material and labour for 18 to 20 mm thick granite stone slabs of approved shade machine cut, machine polished, as in flooring laid over and including screed bed in cement mortar 1:4, 15 mm thick, set and jointed in neat cement slurry and pointed in white cement with pigments to matching the shade complete as specified and directed

Material and labour for 18 to 20 mm thick granite stone slabs of approved shade machine cut, machine polished, fixed on vertical surfaces such as skirting/dado laid over and including 10mm thick backing coat in cement mortar (1:3), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material and labour for 18mm thick italian marble slab machine cut, laid in floor over and including 15mm thick screed bed in cement mortar 1:4, bedded and jointed with white cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified.

Material and labour for 18mm thick italian marble slab machine cut, laid in skirting/dado laid over and including 10 mm thick backing coat in cement mortar 1:3, set and jointed with white cement paste and pointed with white cement mixed with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified.

Material and labour for machine pressed precast concrete inter locking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid to line and slope over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints and gently rolled with vibrator complete all as specified .

Material and labour for machine pressed precast concrete inter locking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 80mm thickness M-40 Grade, glossy finished of approved colour laid to line and slope over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints and gently rolled with vibrator complete all as specified .

Material and Labour for machine pressed cheqered cement coloured tiles of size 250mm x 250mm x 20mm thick mixed with grey cement and pigment laid in floor over and including 15mm thick screed bed in CM 1:4 set and jointed and pointed in neat cement slurry in floors complete all as specified and directed by Engineer -in-Charge.

Supply & Fixing in repairs Wall paper of fibrious material, non woven Vinyl free of approved design & pattern fixed to wall with dry strips or with approved adhesive as per manufacturers instructions.

Supply & Fixing in repairs Roller venetion blinds type made out of standard cloth of approved texture with necessary accessories as per manufacturers instructions.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land. Note: The place of disposal shall be find out by the contractor.

Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar (1:6) and finished even and smooth with and including 1 mm thick neeru complete all as specified.

Material and labour for rendering 5 mm thick on fair faces of concrete surfaces in ceiling in cement mortar (1:3) and finished even and smooth without using extra cement complete all as specified.

Material & Labour for rendering 10 mm thick pre polymer modified ready mixed cement based plaster on chajja top and soffits Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required including curing required upto Ground plus 3rd floor bldg complete all as specified and directed.

Material & Labour for rendering 20 mm thick pre polymer modified ready mixed cement based plaster in two coats 12 mm thick base coat and 8 mm thick finishing/final coat. Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required inclding curing required upto Ground plus 3rd floor bldg complete all as specified and directed.

Material and labour for complete removal of existing treatment from wall, ceiling, soffits, roof facia etc including washing, rubbing down and applying two coats of weather proof acrylic based paint (100% acrylic) exterior grade over one coat of self primer including necessary scaffolding and safety arrangement complete all as specified and directed.

Material and labour for complete removal of existing treatment including washing, rubbing down and stopping of distempered and painted ceiling surfaces, filling holes and cracks with filling putty on wall and applying one coat of wall care putty not less than 3mm thickness and making the surface even and smooth using emery paper and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified..

Material & Labour for preparation of new plastered surfaces of walls and applying two coats of weather proof acrylic based paint (100% acrylic) exterior grade over one coat of self primer including necessary scaffolding and safety arrangement upto G+8 storey bldg complete all as specified and directed by Engr-in-Charge.

Material and labour for preparing old decorated wall surfaces and applying one coat of weather proof acrylic based paint (100% acrylic) exterior grade including necessary scaffolding and safety arrangement complete all as specified and directed by Engr-in-Charge.

Material and labour for complete removal of existing treatment including washing, rubbing down and stopping of distempered and painted wall surfaces, filling holes and cracks with filling putty on wall and applying one coat of wall care putty not less than 3mm thickness and making the surface even and smooth using emery paper and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified..

Material and labour for preparing new plastered surfaces of wall, applying one coat of wall care putty not less than 3mm thickness and making the surface even and smooth using emery paper and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified..

Material & Labour for preparing old treated wooden surface and applying one coat of varnishing over a coat of transparant woodfiller complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in repairs mortise door lock verticle type 7 to 8 inch with mortice handle pair in black silver finish with legend 65 mm brass dead bolt double action 6 Lever lock with keys complete all as specified and directed by Engr-in-Charge.

Material & Labour for complete removal of existing treatment from steel surfaces and applying a coat of epoxy putty/Metal putty 1 to 2mm thick and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge.

Material and labour for 19 mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber/Aluminium frame work complete all as specified and directed.

Material and labour for 9mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber/Aluminium frame work complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings all as specified and directed.

Supply & Fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed.

Supply & Fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles including copings etc.and removing debris outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Material & Labour for brick work with sub class B bricks straight or curved on plan to any radius built in cement mortar 1:6 complete all as specified.

All as per item No 145.00 above but except bricks

Material & Labour for brick work with sub class 'B' bricks,straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified.

Material & Labour for Rendering 15mm thick on brick work or concrete surface in cement mortar 1:4 and finished fair and even complete all as specified and directed.

Supply only Integral water proofing compound .

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Material & Labour for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410-W(GdeE- 250) quality A complete all as specified and directed.

Supply and fixing mild steel plates ( plain or chequered ) channels, square cut or notched ( ordinary and counter sunk ) forming holes, without any attachment including all necessory drilling, bolting,riveting or welding conforming to Fe 410 -W (Gde E- 250) quality-A complete all as specified.

Supply and fixing rolled mild steel in stairs (framed) including stringers, treades, landing, balusters, hand rails etc including cleats, brackets etc including all necessory drilling, bolting,riveting or welding conforming to Fe 410 -W (Gde E- 250) quality-A complete all as specified.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) 150 mm bore set in cement mortar and removal of debris out of MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) 200 mm bore set in cement mortar and removal of debris out of MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) 300 mm bore set in cement mortar and removal of debris out of MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal of debris out of MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land. Note: The place of disposal shall be find out by the contractor.

Material and labour for cleaning & desilting of manholes depth not exc 1.50 mtr by pumping out/removing liquid waste/sewage & plugging the ends of sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinkling bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements, face mask etc and removing the silt, sludge & other waste material in leak proof trucks covered with tarpaulin outside MD land all as per existing rules and regulations of civil authorities and cleaning the manholes with fresh water complete all as specified and directed by Engr-in-Charge. Note: The place of disposal shall be find out by the contractor.

Material and labour for cleaning & desilting of manholes depth exc.1.50 mtr but n.exc.3 mtr by pumping out/removing liquid waste/sewage & plugging the ends of sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinkling bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements, face mask etc and removing the silt, sludge & other waste material in leak proof trucks covered with tarpaulin outside MD land all as per existing rules and regulations of civil authorities and cleaning the manholes with fresh water complete all as specified and directed by Engr-in-Charge. Note: The place of disposal shall be find out by the contractor.

Material and labour for cleaning and desilting of sewage lines upto 150mm bore including sludge chambers, gully traps of size and shape upto any depth by pumping out /removing liquid waste/sewage ,plugging the ends pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinkling bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements, face mask etc and removing the silt,sludge & other waste material in leak proof trucks covered with tarpouline outside MD land all as per existing rules and regulations of civil authorities and flushing the sewer lines with fresh water complete all as specified and directed by Engr-in-Charge. Note: i) Length of sewage lines including chambers, traps etc will be measured for payment. However cleaning of manholes shall be measured and paid separately under appropriate item. ii) The place of disposal shall be find out by the contractor.

Material and labour for cleaning and desilting of sewage lines exc.150mm bore but n.exc 300mm bore including sludge chambers, gully traps of size and shape upto any depth by pumping out /removing liquid waste/sewage ,plugging the ends pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinkling bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements, face mask etc and removing the silt,sludge & other waste material in leak proof trucks covered with tarpouline outside MD land all as per existing rules and regulations of civil authorities and flushing the sewer lines with fresh water complete all as specified and directed by Engr-in-Charge. Note: i) Length of sewage lines including chambers, traps etc will be measured for payment. However cleaning of manholes shall be measured and paid separately under appropriate item. ii) The place of disposal shall be find out by the contractor.

Material and labour for cleaning the chocks/blockages in 150mm bore AC/CI/PVC soil/ waste/rain water pipe of any dia by removing cleaning eye and re-fixing the same after cleaning the pipe, making good damaged cement joints, and removing the silt, sludge & other waste material outside MD land complete all as specified and directed by Engr-in-Charge. Note: i) The place of disposal shall be find out by the contractor.

Material and labour for empting septic tanks and manholes of any depth by providing sewage suction vehicle of capacity 5000 ltrs (BMC Patteren) including necessray other arrangments such as sweepers to clean up the site after work and depositing the same outside MOD land as per existing rules and regulations of civil authorities and flushing the septic tank with fresh water complete all as specified and directed by Engr-in-Charge. Note: i) The place of disposal shall be find out by the contractor. Note:- ii) All precautions shall be taken by all workers while working in foul condition. iii) After cleaning vehicle will be contractors's property. iv) Contractors accredated representive shall be availble during cleaning. v) Complete process shall be completed in all respects within a day.

Material and labour for cleaning and removal of foreign material (silt, sludge etc,) from inside the Gully trap/WC Pan, Nahani trap, Floor trap etc including removing & re-covering of RCC/CI cover and foreign material (silt, sludge etc,) shall be buried in the ground to a distance not exc. 50 m , spreading of bleaching powder complete one or more times all as specified and directed.

Material and labour for cutting out & removal of plants, shurbs with roots from the pipe, roof, brick/stone wall built in cement mortar & applying chemical GLYPHOSATE 41% SL (Soluble Liquid) mixed with water in the proportion of 1: 75, at the place to avoid re-growing of plants/roots & making good the disturbed portion of roof, wall in CM 1:3 at wall portion & PCC 1:2:4 at roof slab & matching the surface to existing finish like white wash, cement base paint, acrylic paint etc over 15mm thick rendering in CM 1:4 including using jhulla and safety arrangement and disposal of demolished material/ waste out of M D land complete all as specified and directed by Engr-in-Charge.(Bldg- ground/stilt plus 4 floors) Note: i) The place of disposal shall be find out by the contractor.

Material and labour for cutting out & removal of plants, shurbs with roots from the pipe, roof, brick/stone wall built in cement mortar & applying chemical GLYPHOSATE 41% SL (Soluble Liquid) mixed with water in the proportion of 1: 75, at the place to avoid re-growing of plants/roots & making good the disturbed portion of roof, wall in CM 1:3 at wall portion & PCC 1:2:4 at roof slab & matching the surface to existing finish like white wash, cement base paint, acrylic paint etc over 15mm thick rendering in CM 1:4 including using jhulla and safety arrangement and disposal of demolished material/ waste out of M D land complete all as specified and directed by Engr-in-Charge.(Bldg- 5th floor to 8 th floor.) Note: i) The place of disposal shall be find out by the contractor.

Material & Labour for removing cover slab of any description from drain / culvert and cleaning the drain / culvert removing soils, spoils, vegetation, silt etc and refixing the cover slab in existing position and making good disturbed surfaces and removing waste material outside MD Land complete all as directed by Engineerin-Charge. Note: i) The place of disposal shall be find out by the contractor.

Material and labour for salt glazed stoneware drain pipe, grade 'A', laid in trenches and jointed as specified, internal diameter of pipe 150 mm complete all as specified & directed.

Material & Labour for reinforced concrete pipes, class NP-2 laid and jointed complete with collars, internal diameter of pipe 150 mm complete all as specified & directed.

Material & Labour for reinforced concrete pipes, class NP-2 laid and jointed complete with collars, internal diameter of pipe 200 mm complete all as specified & directed.

Material & Labour for reinforced concrete pipes, class NP-2 laid and jointed complete with collars, internal diameter of pipe 300 mm complete all as specified & directed.

Material and labour for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in bed to 150 mm bore drain pipe including packing under and haunching against the sides of pipes after they are laid and tested comp[lete all as specified..

Material and labour for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in bed to 200 mm bore drain pipe including packing under and haunching against the sides of pipes after they are laid and tested comp[lete all as specified..

Material and labour for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in bed to 300 mm bore drain pipe including packing under and haunching against the sides of pipes after they are laid and tested comp[lete all as specified..

Excavating in trenches n exc 1.5m wide & n exc 1.5m in depth; for foundation, etc. or for manholes n.exc.10 Sqm on plan and n.exc.1.5m in depth and getting out in hard/dense soil completes all as specified.

Material & Labour for plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete, pot holes etc complete all as specified.

Material & Labour for plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in surface channels and drains complete all as specified.

Material & Labour for plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in foundations, filling and mass concrete, post holes, bed blocks etc complete all as specified.

Material and labour for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified.

Material and labour for providing plain cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in lintels upto 1.5 M clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, roof kerbs water troughs and the like including weathering slightly rounded or chamfered angles and throating including use of formwork (straight or curved) complete all as specified.

Material & Labour for 100 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base and finished fair and even complete all as specified.

Material & Labour 100 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in hard standing laid in alternate panel including use of formwork (straight or curved) complete all as specified.

Demolition of RCC of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition and separating, scraping and cleaning of reinforcement and removing debris outside MD land. Note: The place of disposal shall be find out by the contractor.

Material and labour for providing precast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in landings, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain fair faces including chamfers, weathering, throating and use of forms, moulds or machine moulds etc, setting in cement mortar (1:4) with joints to match complete all as specified . Note - i) Reinforcement shall be measured and paid separetly. ii) Precast cover shall be factory made and of size as directed,

Material & Labour for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in beams, cantilevers, bressumers, lintels over 1.5 m span complete all as specified.

Material and labour for use and waste of form work for sides and soffits of floor or roof beams, beam haunchings , girders, bressummers, lintels, cantilevers, shelves including supports overhangs, etc also splays between floors and beams etc for rough finished surface of concrete flat complete all as specified.

Material and labour for TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with the clips complete all as specified .

Ditto- as per item No. 188.00 above but 5mm dia and over including 10mm dia in stirrups, spaces and binders etc complete all as specified.

Returning filling in , including spreading, leveling, watering and well ramming in layers not exc 25 cm.

Removing excavated materials (soils) exc 5 km but n exc 10 Km .Note: The place of disposal shall be find out by the contractor.

Material & Labour for stone walling of random rubble uncoursed, brought up to course well bonded, bedded and solidly hearted built in cement mortar 1:4 complete all as specified and directed.

All as per item No 192.00 above but except stones.

Material & Labour for flush pointing to random rubble masonry uncoursed or brought upto courses in cement mortar 1:3, complete all as specified.

Supply & Fixing second clas Hard wood (Sal) Plain fillets exc 6 Sqcm and not exc 13 Sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified .

Supply and fixing wall panelling made out of 12mm thick pinewood planks with tongue and grove edges for a seamless look with melamine/ venner laminated finish and installed by using strut framework system. Slates to be backed with synthetic PF 10 x 25 adhesive to wall with stick. The support system, suspension system shall be as per manufacturers instructions and panelling shall be finished as directed by Engg-in-Charge.

Taking down carefully interlocking paver blocks from the existing surfaces and refixing them in same place after filling depression with fine sand and re-laid the pavers over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints and gently rolled with vibrator complete all as specified .

Material & Labour machine pressed coloured cement concrete tiles tiles of size 250mm x 250mm x 22mm thick mixed with grey cement and pigment laid in floor over and including 15mm thick screed bed in CM 1:6 set and jointed and pointed in neat cement slurry in floors complete all as specified and directed by Engineer -in-Charge.

Material & Labour 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like laid over and including 20 mm thick screed bed in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

Material and labour for machine cut kota stone slab 18 to 20 mm thick as in steps, landings etc laid over and including 20mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including rubbing, cutting and polishing and making 02 Nos grooves as specified in SSR Part I .

Material and labour for MS framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings etc conforming to conforming to Fe.290.Gde-E-165 complete all as specified

Material and labour for Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes gate stops, parts of ranges, balusters and similar articles exc 5 Kg Each complete all as specified.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even & smooth without using extra cement completed all as specified.

Material and labour for rendering 10 mm thick on fair faces of concrete surfaces in ceiling in CM (1:4) and finished even and smooth without using extra cement completed all as specified.

Material and labour for rendering 15 mm thick on fair faces of brickwork or concrete surfaces of wall in CM (1:4) mixed with integral water proofing compound and finished even and fair complete all as specified. Note- Water proofing compound will be measured and paid for separately.

Taking down eaves gutters and PVC rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swanecks etc incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories).

Dismantling of cast iron or reinforced concrete drain pipes of any dia fixed to wall and taking out from trenches ciomplete all as directed.

Supply & Fixing in repairs 160 mm bore PVC (SWR) bends any radius including rubber ring joints and fixing clips complete all as specified and as directed .

Supply & Fixing in repairs 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal including rubber ring joints and fixing clips complete all as specified and as directed .

Supply & Fixing in repairs 75 mm bore PVC (SWR) bends, single/double 'Y' or 'T' with access doors any radius including rubber ring joints and fixing clips complete all as specified and as directed .

Supply & Fixing in repairs 110 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal including rubber ring joints and fixing clips complete all as specified and as directed .

Supply & Fixing in repairs 160 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal including rubber ring joints and fixing clips complete all as specified and as directed .

Supply & Fixing 100 mm bore cast iron sand cast type soil, waste and vent pipes in any length with or without ears fixed with cement joints, laid in trenches or in floors complete all as specified.

Supply & Fixing 100 mm bore cast iron sand cast type soil, waste and vent pipes in any length with or without ears fixed to walls, ceiling with and including suitable size GI clamps with cement joints complete all as specified.

Supply & Fixing 75 mm bore cast iron sand cast type soil, waste and vent pipes in any length with or without ears fixed to walls, ceiling with and including suitable size GI clamps with cement joints complete all as specified.

Supply & Fixing in repairs 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified.

Supply & Fixing in repairs 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified.

Supply & Fixing in repairs 75 mm bore cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.

Supply & Fixing in repairs plastic water closet seat cover, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium anodised hinging device complete all as specified.

Supply and fix in repairs cast iron 'P' or 'S' trap 100mm dia

Supply & Fixing in repairs 15 mm dia Pillar taps cast copper alloy CP fancy type, with capstan heads, screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed complete all as specified.

Supply & Fixing in repairs 15mm bore bib taps, cast copper alloy chromium plated fancy type with crutch or butter fly handle, screwed down & fixed complete all as specified.

Supply & Fixing in repairs 15mm bore angle valve cast copper alloy chromium plated fancy type with crutch or butter fly handle complete all as specified.

Supply & Fixing in repairs 15 mm dia two way (Hot or Cold) pillar taps cast copper alloy chromium plated fancy type complete all as specified.

Supply & Fixing in repairs 15mm bore 3 way mixer valve (Hot & Cold) cast copper alloy chromium plated fancy type for mixing Hot and cold water screwed down for iron pipe complete all as specified .

Supply & Fixing in repair wash hand basin vitreous china white (flat back) of size 550x400mm including cutting for and pinning in ends of brackets including brackets, 32 mm dia brass CP waste coupling and 32mm dia PVC waste pipe 90cm long , 15mm bore PVC connector complete all as specified,

Supply & Fixing PVC connections 15 mm size with PTMT nuts of length 600mm

Supply and fixing in repairs low level PVC flushing cistern of heavy duty, 10 Ltrs capacity, syphonic action type complete with inlet, ball valve, float and handle including cast iron bracket and connecting to WC complete all as specified.

Supply & Fixing in repairs Flush pipe of Polyethylene of low or high density or PVC 32 mm dia for low level flushing cistern

Supply & Fixing PVC bathroom cabinet with 4mm thick looking mirror of overall size 450 x 300 x 120 mm of approved tint and pattern and fixing to wall with 02 Nos. chromium plated screws complete all as specified and as directed

Supply & Fixing in repairs Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union

Supply & Fixing in repairs stainless steel Soap dish any type fixed to plugs with chromium plated brass screws.

Supply & Fixing in repairs PVC modular section 20mm thick as in profile including 'C' channels, aluminium all around the profile all as specified.

Supply & Fixing in repairs aluminium anodised tubular towel rail 20mm dia D type 60 cm long between flanges with brackets complete all as specified.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

Material & Labour for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

Material & Labour for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint including necessary scafolding for high rise bldgs complete all as specified and directed.

Material & Labour for preparation of old painted wooden surfaes of any description over 10cm width or girth and applying one coat of synthetic enamel paint on external window including necessary scafolding for high rise bldgs complete all as specified and directed.

Material & Labour preparation of old distempered surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil emulsion distemper complete all as specified.

Shree Ayyappa Engineering

SHRI SAI ENTERPRISES

MAHABIR INDUSTRIAL PRODUCTS (INDIA)

Pragathi Infrastructure Co.

SR Construction

Satyanarayan Trading Co.

SHREE JAGDISH FURNITURE CO.

the bhimani group of companies